History | |
---|---|
United States | |
Namesake | James Mugford |
Builder | Union Iron Works, San Francisco, California |
Laid down | 20 December 1917 |
Launched | 14 April 1918 |
Commissioned | 25 November 1918 |
Decommissioned | 7 June 1922 |
Stricken | 19 May 1936 |
Fate | Sold for scrap, 1936 |
General characteristics | |
Class and type | Wickes-class destroyer |
Displacement |
|
Length | 314 ft 4 in (95.8 m) |
Beam | 30 ft 11 in (9.42 m) |
Draught | 9 ft 10 in (3.0 m) |
Installed power |
|
Propulsion | 2 shafts, 2 steam turbines |
Speed | 35 knots (65 km/h; 40 mph) (design) |
Range | 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph) (design) |
Complement | 6 officers, 108 enlisted men |
Armament |
|
USS Mugford (DD-105) was a Wickes-class destroyer built for the United States Navy during World War I.
The Wickes class was an improved and faster version of the preceding Caldwell-class. Two different designs were prepared to the same specification that mainly differed in the turbines and boilers used. The ships built to the Bethlehem Steel design, built in the Fore River and Union Iron Works shipyards, mostly used Yarrow boilers that deteriorated badly during service and were mostly scrapped during the 1930s. [1] The ships displaced 1,202–1,208 long tons (1,221–1,227 t) at standard load and 1,295–1,322 long tons (1,316–1,343 t) at deep load. They had an overall length of 314 feet 4 inches (95.8 m), a beam of 30 feet 11 inches (9.4 m) and a draught of 9 feet 10 inches (3.0 m). They had a crew of 6 officers and 108 enlisted men. [2]
Performance differed radically between the ships of the class, often due to poor workmanship. The Wickes class was powered by two steam turbines, each driving one propeller shaft, using steam provided by four water-tube boilers. The turbines were designed to produce a total of 27,000 shaft horsepower (20,000 kW) intended to reach a speed of 35 knots (65 km/h; 40 mph). The ships carried 225 long tons (229 t) of fuel oil which was intended gave them a range of 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph). [3]
The ships were armed with four 4-inch (102 mm) guns in single mounts and were fitted with two 1-pounder guns for anti-aircraft defense. Their primary weapon, though, was their torpedo battery of a dozen 21 inch (533 mm) torpedo tubes in four triple mounts. In many ships a shortage of 1-pounders caused them to be replaced by 3-inch (76 mm) anti-aircraft (AA) guns. [1] They also carried a pair of depth charge rails. A "Y-gun" depth charge thrower was added to many ships. [4]
Mugford, named for James Mugford, was laid down 20 December 1917 by Union Iron Works Company, San Francisco, California; launched 14 April 1918; sponsored by Mrs. George H. Fort; and commissioned 25 November 1918.
Mugford joined the fleet for winter exercises off Guantanamo Bay, Cuba, in January 1919, then sailed north for operations along the coast between New York and Massachusetts until 21 November, when she left Newport for San Diego, arriving 22 December. Here she became tender to a seaplane division, and during the pioneering days of naval aviation cruised with her charges on exercises along the California coast, visiting the Panama Canal Zone in December 1920 and January 1921.
Mugford was decommissioned at San Diego 7 June 1922, and was sold for scrap to Schiavone-Bonomo Corporation, New York City, in 1936.
USS Murray (DD-97) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Kimberly (DD-80) was a Wickes-class destroyer built for the United States Navy during World War I.
USS McKee (DD-87) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Hazelwood (DD-107) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Champlin (DD-104) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Hart (DD-110) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Ingraham (DD-111) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Ludlow (DD-112) was a Wickes-class destroyer built for the United States Navy during World War I.
USS DeLong (DD-129) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Meredith (DD-165) was a Wickes-class destroyer built for the United States Navy during World War I. She was the first destroyer in the United States Navy that named for a marine.
USS Bush (DD-166) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Burns (DD-171) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Anthony (DD-172) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Sproston (DD-173) was a Wickes-class destroyer built for the United States Navy during World War I.
USS O'Bannon (DD-177) was a Wickes-class destroyer built for the United States Navy during World War I.
USS McCawley (DD-276) was a Clemson-class destroyer built for the United States Navy during World War I. She was armed with 4 × 4 inch and 2 × 1 pounder guns. She was commissioned on 22 September 1919, served with the Pacific Fleet for 3 years and was laid up on 7 June 1922. McCawley was recommissioned on 27 September 1923, again serving in the Pacific, and decommissioned in 1930 before being sold for scrap.
USS Doyen (DD-280) was a Clemson-class destroyer built for the United States Navy during World War I.
USS Kennedy (DD-306) was a Clemson-class destroyer built for the United States Navy during World War I.
USS Preston (DD-327) was a Clemson-class destroyer built for the United States Navy during World War I.
USS Macdonough (DD-331) was a Clemson-class destroyer built for the United States Navy during World War I.