Urban climate

Last updated

The climate in urban areas differs from that in neighboring rural areas, as a result of urban development. Urbanization greatly changes the form of the landscape, and also produces changes in an area's air. The study of urban climate is urban climatology.

Contents

In 1950 Åke Sundborg published one of the first theories on the climate of cities. [1] [2]

In the pursuit of a forthcoming shift in energy sources, the pivotal role of natural elements within urban settings cannot be overstated. This involves tapping into the possibilities presented by solar radiation, wind patterns, as well as the thermal capacities inherent in soil and water. Additionally, it encompasses leveraging the influence of weather patterns, seasonal variations, and the presence of green spaces. [3]

Climate change

As climate change becomes a pressing global issue, both global and local economies must adapt and innovate in their methodologies to foster sustainable practices and combat its effects. It is essential for them to embrace alternative approaches, such as renewable energy sources, eco-friendly production methods, and efficient resource management, to maintain economic growth while minimizing environmental impact. [4] As we learn more about climate change, it's important for experts and those sharing knowledge to keep talking and working together to lower the spread of inaccurate information and hopefully spread active awareness to every corner of the world. [5] In regions like India, attaining sustainable urban development poses formidable challenges due to a notable dearth of climate awareness within the planning system. Sustained progress relies on a comprehensive understanding of the intricate interactions between urbanization and climate change, which necessitates incorporating climate considerations and resilience measures into the fabric of urban planning. By enhancing knowledge and raising awareness among planners, policymakers, and stakeholders, it becomes possible to integrate climate-responsive strategies into the planning process, including efficient land use, low-carbon transportation, renewable energy, and climate-resilient infrastructure. Addressing this knowledge gap and fostering a climate-conscious mindset within the planning system are critical steps towards achieving sustainable urban development in India and empowering cities to navigate the complex challenges of climate change while ensuring a harmonious and prosperous future for its residents. [6]

Communities

Contemporary urban planning should transcend mere aesthetics achieved through private initiatives, recognizing the significance of inclusive and accessible public spaces. These shared spaces play a vital role in safeguarding the fundamental right to adequate housing for all. It entails a social contract that fosters unity among diverse individuals by establishing a sense of belonging and shared values. By prioritizing the development of public spaces alongside private endeavors, city planning can foster community cohesion, promote equitable access to resources, and contribute to the overall well-being and quality of life for residents, reinforcing the principles of social unity and collective progress. [5]

Role of remote sensing education

A considerable number of undergraduate minority students with STEM backgrounds have limited knowledge of remote sensing and its applications in geophysics. This inadequate exposure, awareness, understanding, and engagement hinder their exploration of innovative approaches to gather environmental knowledge. In order to enrich undergraduate education, adequately prepare future geoscientists, empower underserved communities, and tackle the shortage of geoscience professionals, it is crucial to employ unique teaching and learning methods. The Center for Remote Sensing and Earth System Sciences (ReSESS) at City Tech focuses on leveraging remote sensing to attract and engage students from underserved communities, with a specific emphasis on studying urban climate dynamics in their local neighborhoods. This approach has demonstrated success in raising awareness and deepening understanding of the geosciences, while motivating students to contribute their newly acquired knowledge to local environmental sustainability initiatives. [7]

Temperature

Increased urban land use and occupation alters the local thermal field resulting in the development of warmer regions known as urban heat islands (UHIs). [8] An urban heat island is a phenomenon where these surface temperature deviations and air in the lowest levels of the atmosphere are concentrated in urban areas and those immediately downwind, and often are more pronounced at night than during the day, rather than surrounding suburban and especially rural areas. [9] [10] The solar energy absorbed and produced from solar radiation and anthropogenic activity is partitioned accordingly: warming the air above the surface via convection, evaporating moisture from the urban surface system, and storing heat in surface materials, such as buildings and roads. [8] The solar energy is stored during the day and typically released during the night. [9] Dark materials making up the buildings, impermeable soil and paved surfaces retain a majority of the solar energy. [8] [10] This allows for larger heat islands and increased thermal discomfort. [8] [10] Surface reflectivity in urban areas can impact ambient temperature. [11] When the vegetative surface is dark and dry it can reach 52 °C (126 °F), whereas when the land is light and moist it reaches 18 °C (64 °F). [10] Water evaporation usually helps to release energy from vegetative surfaces to cool the surface above. [9] But most hotspot locations have little greenery which influences the formation of urban heat islands. [8] [9] Darker man-made surfaces have a lower albedo and heat capacity than natural surfaces allowing for increased photochemical reaction rates and absorption of visible radiation. [9] [11] This phenomenon can also be exacerbated when people release waste heat via heating and ventilating systems (e.g. air conditioners) and vehicular emissions. [9] [10] Expansion of these urban areas can lead to higher surface and air temperatures contributing to urban climate. [9]

Thermal loading

A significant global challenge that cities face today is the escalating urban heat island effect. This phenomenon refers to the elevated temperatures experienced in urban areas due to the cumulative impact of both natural and human-induced factors. Managing the thermal load becomes imperative to regulate and sustain optimal temperatures in these urban environments. Strategic planning and implementation of various heat mitigation strategies become essential to counteract the adverse effects of urban heat islands. This involves the careful consideration of factors such as urban design, green infrastructure, building materials, landscaping, and energy-efficient cooling systems. By adopting a multifaceted approach that integrates natural and technological solutions to add or remove heat as necessary, cities can create more resilient and comfortable living environments, ensuring the well-being and quality of life for their inhabitants while mitigating the impact of urban heat islands on public health, energy consumption, and overall urban sustainability. [6]

Precipitation

Because cities are warmer, the warmer air is apt to rise, and if the humidity is high it can cause convectional rainfall – short intense bursts of rain and thunderstorms.[ citation needed ]

Urban areas produce particles of dust (notably soot) and these act as hygroscopic nuclei which encourages rain production and otherwise affect convection via cloud microphysics.[ citation needed ]

Because of the warmer temperatures there is less snow in the city than surrounding areas.[ citation needed ]

Winds

Wind speeds are often lower in cities than the countryside because the buildings act as barriers (wind breaks). On the other hand, tall buildings can act as wind tunnels in which winds are funneled between the structures. This effect can be exacerbated on longer streets with suitable buildings properly oriented to the wind direction. The gusty winds around buildings also leads to eddying.[ citation needed ]

Humidity

Cities usually have a lower relative humidity than the surrounding air because cities are hotter, and rainwater in cities is unable to be absorbed into the ground to be released into the air by evaporation, and transpiration occurs much less since cities contain little vegetation relative to rural areas. Surface runoff is usually taken up directly into the subterranean sewage water system and thus vanishes from the surface immediately. Better understanding of urban temperature and water vapor contributions and/ or loss will reveal the reasons for lower relative humidity within cities, especially since relative humidity is dependent on temperature changes. [12]

See also

Related Research Articles

An autonomous building is a building designed to be operated independently from infrastructural support services such as the electric power grid, gas grid, municipal water systems, sewage treatment systems, storm drains, communication services, and in some cases, public roads.

<span class="mw-page-title-main">Solar energy</span> Radiant light and heat from the Sun, harnessed with technology

Solar energy is radiant light and heat from the Sun that is harnessed using a range of technologies such as solar power to generate electricity, solar thermal energy, and solar architecture. It is an essential source of renewable energy, and its technologies are broadly characterized as either passive solar or active solar depending on how they capture and distribute solar energy or convert it into solar power. Active solar techniques include the use of photovoltaic systems, concentrated solar power, and solar water heating to harness the energy. Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light-dispersing properties, and designing spaces that naturally circulate air.

<span class="mw-page-title-main">Urban heat island</span> Situation where cities are warmer than surrounding areas

Urban areas usually experience the urban heat island (UHI) effect, that is, they are significantly warmer than surrounding rural areas. The temperature difference is usually larger at night than during the day, and is most apparent when winds are weak, under block conditions, noticeably during the summer and winter. The main cause of the UHI effect is from the modification of land surfaces while waste heat generated by energy usage is a secondary contributor. Urban areas occupy about 0.5% of the Earth's land surface but host more than half of the world's population. As a population center grows, it tends to expand its area and increase its average temperature. The term heat island is also used; the term can be used to refer to any area that is relatively hotter than the surrounding, but generally refers to human-disturbed areas.

<span class="mw-page-title-main">Microclimate</span> Local set of atmospheric conditions that differ significantly from the surrounding area

A microclimate is a local set of atmospheric conditions that differ from those in the surrounding areas, often slightly but sometimes substantially. The term may refer to areas as small as a few square meters or smaller or as large as many square kilometers. Because climate is statistical, which implies spatial and temporal variation of the mean values of the describing parameters, microclimates are identified as statistically distinct conditions which occur and/or persist within a region. Microclimates can be found in most places but are most pronounced in topographically dynamic zones such as mountainous areas, islands, and coastal areas.

<span class="mw-page-title-main">Passive solar building design</span> Architectural engineering that uses the Suns heat without electric or mechanical systems

In passive solar building design, windows, walls, and floors are made to collect, store, reflect, and distribute solar energy, in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design because, unlike active solar heating systems, it does not involve the use of mechanical and electrical devices.

<span class="mw-page-title-main">Earth shelter</span> House partially or entirely surrounded by earth

An earth shelter, also called an earth house, earth bermed house, or underground house, is a structure with earth (soil) against the walls, on the roof, or that is entirely buried underground.

This glossary of climate change is a list of definitions of terms and concepts relevant to climate change, global warming, and related topics.

<span class="mw-page-title-main">Heat recovery ventilation</span> Method of reusing thermal energy in a building

Heat recovery ventilation (HRV), also known as mechanical ventilation heat recovery (MVHR) is a ventilation system that recovers energy by operating between two air sources at different temperatures. It is used to reduce the heating and cooling demands of buildings.

<span class="mw-page-title-main">Windcatcher</span> Architectural element for creating a draft

A windcatcher, wind tower, or wind scoop is a traditional architectural element used to create cross ventilation and passive cooling in buildings. Windcatchers come in various designs, depending on whether local prevailing winds are unidirectional, bidirectional, or multidirectional, on how they change with altitude, on the daily temperature cycle, on humidity, and on how much dust needs to be removed. Despite the name, windcatchers can also function without wind.

This is a list of meteorology topics. The terms relate to meteorology, the interdisciplinary scientific study of the atmosphere that focuses on weather processes and forecasting.

<span class="mw-page-title-main">Sustainable architecture</span> Architecture designed to minimize environmental impact

Sustainable architecture is architecture that seeks to minimize the negative environmental impact of buildings through improved efficiency and moderation in the use of materials, energy, development space and the ecosystem at large. Sustainable architecture uses a conscious approach to energy and ecological conservation in the design of the built environment.

Urban climatology is the study of urban climate. It is a branch of climatology that concerns interactions between urban areas and the atmosphere, the effects they have on one another, and the varying spatial and temporal scales at which these processes occur.

<span class="mw-page-title-main">Reflective surfaces (climate engineering)</span>

Reflective surfaces, or ground-based albedo modification (GBAM), is a solar radiation management method of enhancing Earth's albedo. The IPCC described this method as "whitening roofs, changes in land use management, change of albedo at a larger scale ."

<span class="mw-page-title-main">Ground-coupled heat exchanger</span> Underground heat exchanger loop that can capture or dissipate heat to or from the ground

A ground-coupled heat exchanger is an underground heat exchanger that can capture heat from and/or dissipate heat to the ground. They use the Earth's near constant subterranean temperature to warm or cool air or other fluids for residential, agricultural or industrial uses. If building air is blown through the heat exchanger for heat recovery ventilation, they are called earth tubes.

<span class="mw-page-title-main">Waste heat</span> Heat that is produced by a machine that uses energy, as a byproduct of doing work

Waste heat is heat that is produced by a machine, or other process that uses energy, as a byproduct of doing work. All such processes give off some waste heat as a fundamental result of the laws of thermodynamics. Waste heat has lower utility than the original energy source. Sources of waste heat include all manner of human activities, natural systems, and all organisms, for example, incandescent light bulbs get hot, a refrigerator warms the room air, a building gets hot during peak hours, an internal combustion engine generates high-temperature exhaust gases, and electronic components get warm when in operation.

<span class="mw-page-title-main">Passive cooling</span> Building design approach

Passive cooling is a building design approach that focuses on heat gain control and heat dissipation in a building in order to improve the indoor thermal comfort with low or no energy consumption. This approach works either by preventing heat from entering the interior or by removing heat from the building.

<span class="mw-page-title-main">Building insulation</span> Material to reduce heat transfer in structures

Building insulation is material used in a building to reduce the flow of thermal energy. While the majority of insulation in buildings is for thermal purposes, the term also applies to acoustic insulation, fire insulation, and impact insulation. Often an insulation material will be chosen for its ability to perform several of these functions at once.

<span class="mw-page-title-main">Thermal comfort</span> Satisfaction with the thermal environment

Thermal comfort is the condition of mind that expresses subjective satisfaction with the thermal environment. The human body can be viewed as a heat engine where food is the input energy. The human body will release excess heat into the environment, so the body can continue to operate. The heat transfer is proportional to temperature difference. In cold environments, the body loses more heat to the environment and in hot environments the body does not release enough heat. Both the hot and cold scenarios lead to discomfort. Maintaining this standard of thermal comfort for occupants of buildings or other enclosures is one of the important goals of HVAC design engineers.

<span class="mw-page-title-main">Radiant heating and cooling</span> Category of HVAC technologies

Radiant heating and cooling is a category of HVAC technologies that exchange heat by both convection and radiation with the environments they are designed to heat or cool. There are many subcategories of radiant heating and cooling, including: "radiant ceiling panels", "embedded surface systems", "thermally active building systems", and infrared heaters. According to some definitions, a technology is only included in this category if radiation comprises more than 50% of its heat exchange with the environment; therefore technologies such as radiators and chilled beams are usually not considered radiant heating or cooling. Within this category, it is practical to distinguish between high temperature radiant heating, and radiant heating or cooling with more moderate source temperatures. This article mainly addresses radiant heating and cooling with moderate source temperatures, used to heat or cool indoor environments. Moderate temperature radiant heating and cooling is usually composed of relatively large surfaces that are internally heated or cooled using hydronic or electrical sources. For high temperature indoor or outdoor radiant heating, see: Infrared heater. For snow melt applications see: Snowmelt system.

<span class="mw-page-title-main">Passive daytime radiative cooling</span> Management strategy for global warming

Passive daytime radiative cooling (PDRC) is the use of unpowered, reflective/thermally-emissive surfaces to lower the temperature of a building or other object.

References

  1. ↑ "Kungl. Vetenskapsakademiens årsberättelse 2007" (PDF) (in Swedish). No. 81. Stockholm. 2008. pp. 30–31. Archived from the original (PDF) on 2018-07-04. Retrieved 2016-10-26.{{cite magazine}}: Cite magazine requires |magazine= (help)
  2. ↑ Hoppe, Gunnar (1986). "Åke Sundborg". Geografiska Annaler . 69 (1): 1–3. doi:10.1080/04353676.1987.11880191.
  3. ↑ Roesler, Sascha; Kobi, Madlen; Stieger, Lorenzo (2022). Roesler, Sascha; Kobi, Madlen; Stieger, Lorenzo (eds.). Coping with Urban Climates: Comparative Perspectives on Architecture and Thermal Governance. Vol. 2. p. 47. doi:10.1515/9783035624243. ISBN   978-3-0356-2424-3.
  4. ↑ Paola, Sutto (2010). Urban Climate Change Crossroads (1st ed.). Taylor & Francis Group.
  5. 1 2 Sutto, Paola (2010). Urban Climate Change Crossroads (1st ed.). Taylor & Franis.
  6. 1 2 Barpete, Kruti; Mehrotra, Surabhi (July 2023). "Climate-Informed Planning through Mapping of Urban Thermal Load and Cooling Potential: Case of Tropical City of Bhopal". Journal of the Indian Society of Remote Sensing. 51 (7): 1375–1391. doi:10.1007/s12524-023-01710-3. ISSN   0255-660X.
  7. ↑ Blake, Reginald; Norouzi, Hamidreza; Azarderakhsh, Marzi; Bah, Abdou; Rivera, Julia (2023-07-16). "Using Remote Sensing to Catalyze Urban Climate Studies in Underserved Communities". IGARSS 2023 - 2023 IEEE International Geoscience and Remote Sensing Symposium. IEEE. pp. 2329–2332. doi:10.1109/IGARSS52108.2023.10282339. ISBN   979-8-3503-2010-7.
  8. 1 2 3 4 5 Paulino, Amanda (2017). "Analysis of the urban heat island in representative points of the city of Bayeux/PB". Journal of Hyperspectral Remote Sensing. 7: 345–356.
  9. 1 2 3 4 5 6 7 Ningrum, Widya (2018). "Urban Heat Island towards Urban Climate". IOP Conference Series: Earth and Environmental Science. 118 (1): 012048. Bibcode:2018E&ES..118a2048N. doi: 10.1088/1755-1315/118/1/012048 .
  10. 1 2 3 4 5 FTUI, IJtech. "The Impact of Road Pavement on Urban Heat Island (UHI) Phenomenon". IJTech - International Journal of Technology. Retrieved 2019-04-07.
  11. 1 2 Akbari, Hashem; Jandaghian, Zahra (June 2018). "The Effect of Increasing Surface Albedo on Urban Climate and Air Quality: A Detailed Study for Sacramento, Houston, and Chicago". Climate. 6 (2): 19. Bibcode:2018Clim....6...19J. doi: 10.3390/cli6020019 .
  12. ↑ Ackerman, Bernice (1987). "Climatology of Chicago Area Urban-Rural Differences in Humidity". Journal of Climate and Applied Meteorology. 26 (3): 427–430. Bibcode:1987JApMe..26..427A. doi: 10.1175/1520-0450(1987)026<0427:cocaur>2.0.co;2 .
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.