Volcanic passive margin

Last updated

Volcanic passive margins (VPM) and non-volcanic passive margins are the two forms of transitional crust that lie beneath passive continental margins that occur on Earth as the result of the formation of ocean basins via continental rifting. Initiation of igneous processes associated with volcanic passive margins occurs before and/or during the rifting process depending on the cause of rifting. There are two accepted models for VPM formation: hotspots/mantle plumes and slab pull. Both result in large, quick lava flows over a relatively short period of geologic time (i.e. a couple of million years). VPM's progress further as cooling and subsidence begins as the margins give way to formation of normal oceanic crust from the widening rifts. [1]

Contents

Characteristics

Despite the differences in origin and formation, most VPMs share the same characteristics:

Development

Not to scale
Extensional stress leads to asthenospheric upwelling and Listric Faulting. VPMStage 1.png
Not to scale
Extensional stress leads to asthenospheric upwelling and Listric Faulting.
Not to scale
Asthenospheric upwelling, listric faulting, and crustal thinning continue. Mantle convection (A) further weakens lithosphere and leads to the formation of dikes and sills (B). Dikes and sills feed magma chambers in the lower and upper crust (C). Lava erupts as basaltic sheet flows (D). VPMStage 2.png
Not to scale
Asthenospheric upwelling, listric faulting, and crustal thinning continue. Mantle convection (A) further weakens lithosphere and leads to the formation of dikes and sills (B). Dikes and sills feed magma chambers in the lower and upper crust (C). Lava erupts as basaltic sheet flows (D).
Not to scale
Thinning crust is strained to the point of breaking, forming a mid-ocean ridge (A). Mantle material upwells to fill the gap at the mid-ocean ridge (B) and cools to form oceanic crust (C). Volcanic sheet flows atop transitional oceanic crust form outer seaward dipping reflectors (D). Convecting mantle material along base of transitional crust cools to form HVLC (E). VPMStage3.png
Not to scale
Thinning crust is strained to the point of breaking, forming a mid-ocean ridge (A). Mantle material upwells to fill the gap at the mid-ocean ridge (B) and cools to form oceanic crust (C). Volcanic sheet flows atop transitional oceanic crust form outer seaward dipping reflectors (D). Convecting mantle material along base of transitional crust cools to form HVLC (E).
Extension thins the crust. Magma reaches the surface through radiating sills and dikes, forming basalt flows, as well as deep and shallow magma chambers below the surface. The crust gradually sink due to thermal subsidence, and originally horizontal basalt flows are rotated tosees become seaward dipping reflectors. Mantleplume.png

Extension thins the crust. Magma reaches the surface through radiating sills and dikes, forming basalt flows, as well as deep and shallow magma chambers below the surface. The crust gradually sink due to thermal subsidence, and originally horizontal basalt flows are rotated tosees become seaward dipping reflectors.

Rift initiation

Active rifting

The active rift model sees rupture driven by hotspot or mantle plume activity. Upwellings of hot mantle, known as mantle plumes, originate deep in Earth and rise to heat and thin the lithosphere. Heated lithosphere thins, weakens, rises, and finally rifts, Enhanced melting following continental breakup is very important in VPMs, creating thicker than normal oceanic crust of 20 to 40 km thick. [1] Other melts caused by convection related upwelling form reservoirs of magma from which dike swarms and sills eventually radiate to the surface, creating the characteristic seaward dipping lava flows. This model is controversial. [1] [2] [4] [5]

Passive rifting

The passive rift model infers that slab pull stretches the lithosphere and thins it. To compensate for lithospheric thinning, asthenosphere upwells, melts due to adiabatic decompression, and derivative melts rise to the surface to erupt. Melts push up through faults towards the surface, forming dikes and sills. [1] [2] [3] [4] [5] [6]

Development of transitional crust

Continued extension leads to accelerated igneous activity, including repeated eruptions. Repeated eruptions form a thick sequence of lava beds that can reach a combined thickness of up to 20 km. These beds are identified on seismic refraction sections as seaward dipping reflectors. It is important to note that the early phase of volcanic activity is not limited to the production of basalts. Rhyolite and other felsic rocks can also be found in these zones. [2] [3] [5]

Continued extension with volcanic activity forms transitional crust, welding ruptured continent to nascent ocean floor. Volcanic beds cover the transition from thinned continental crust to oceanic crust. Also occurring during this phase is the formation of high velocity seismic zones under the thinned continental crust and the transitional crust. These zones are identified by typical seismic velocities between 7.2 and 7.7 km/s and are usually interpreted as layers of mafic to ultramafic rocks that have underplated the transitional crust. [2] [3] [5] Asthenospheric upwelling leads to the formation of a mid-ocean ridge and new oceanic crust progressively separates the once-conjoined rift halves. Continued volcanic eruptions spread lava flows across transitional crust and onto oceanic crust. Due to the high rate of magmatic activity the new oceanic crust forms much thicker than typical oceanic crust. Some have theorized that the copious amounts of volcanic material also lead to the formation of oceanic plateaus at this time.

Post-rift

The final and longest phase is the continued thermal subsidence of the transitional crust and the accumulation of sediments. Continued seafloor spreading leads to the formation of oceanic crust of normal thickness. Over time this production of normal oceanic crust and sea floor spreading leads to the formation of an ocean. [2] This phase is of the most interest to the oil industry and sedimentary geologists.

Distribution and examples

The distribution of known volcanic margins is shown on the graphic to the right. Many of the margins have not been thoroughly investigated and more passive margins are identified as volcanic from time to time.

Volcanic passive margins:

Map showing the distribution of Earth's passive margins with known volcanic and non-volcanic margins distinguished. The margins are marked with color masks where the darkest blues and reds are non-volcanic and volcanic passive margins, respectively. Globald.png
Map showing the distribution of Earth's passive margins with known volcanic and non-volcanic margins distinguished. The margins are marked with color masks where the darkest blues and reds are non-volcanic and volcanic passive margins, respectively.

VPM example: The US Atlantic Margin

The US Atlantic passive margin extends from Florida to southern Nova Scotia. This VPM was a result of the breakup of the supercontinent, Pangea, in which North America separated from northwestern Africa and Iberia to form the North Atlantic Ocean. This margin has a typical history of tectonic events that are representative of volcanic passive margins with rifting and passive margin formation occurring 225-165 million years ago. Like other VPMs the US East Coast Margin developed in two stages: First, rifting, initiated during the Middle to Late Triassic and continued into Jurassic time and, second, seafloor spreading, which began in Jurassic time and continues today. The US East Coast includes several components which are characteristic of VPM's including seaward-dipping reflectors, flood basalts, dikes, and sills.

Related Research Articles

<span class="mw-page-title-main">Rift</span> Geological linear zone where the lithosphere is being pulled apart

In geology, a rift is a linear zone where the lithosphere is being pulled apart and is an example of extensional tectonics. Typical rift features are a central linear downfaulted depression, called a graben, or more commonly a half-graben with normal faulting and rift-flank uplifts mainly on one side. Where rifts remain above sea level they form a rift valley, which may be filled by water forming a rift lake. The axis of the rift area may contain volcanic rocks, and active volcanism is a part of many, but not all, active rift systems.

<span class="mw-page-title-main">Oceanic crust</span> Uppermost layer of the oceanic portion of a tectonic plate

Oceanic crust is the uppermost layer of the oceanic portion of the tectonic plates. It is composed of the upper oceanic crust, with pillow lavas and a dike complex, and the lower oceanic crust, composed of troctolite, gabbro and ultramafic cumulates. The crust overlies the rigid uppermost layer of the mantle. The crust and the rigid upper mantle layer together constitute oceanic lithosphere.

<span class="mw-page-title-main">Flood basalt</span> Very large volume eruption of basalt lava

A flood basalt is the result of a giant volcanic eruption or series of eruptions that covers large stretches of land or the ocean floor with basalt lava. Many flood basalts have been attributed to the onset of a hotspot reaching the surface of the Earth via a mantle plume. Flood basalt provinces such as the Deccan Traps of India are often called traps, after the Swedish word trappa, due to the characteristic stairstep geomorphology of many associated landscapes.

<span class="mw-page-title-main">Large igneous province</span> Huge regional accumulation of igneous rocks

A large igneous province (LIP) is an extremely large accumulation of igneous rocks, including intrusive and extrusive, arising when magma travels through the crust towards the surface. The formation of LIPs is variously attributed to mantle plumes or to processes associated with divergent plate tectonics. The formation of some of the LIPs in the past 500 million years coincide in time with mass extinctions and rapid climatic changes, which has led to numerous hypotheses about causal relationships. LIPs are fundamentally different from any other currently active volcanoes or volcanic systems.

<span class="mw-page-title-main">Iceland hotspot</span> Hotspot partly responsible for volcanic activity forming the Iceland Plateau and island

The Iceland hotspot is a hotspot which is partly responsible for the high volcanic activity which has formed the Iceland Plateau and the island of Iceland.

<span class="mw-page-title-main">East African Rift</span> Active continental rift zone in East Africa

The East African Rift (EAR) or East African Rift System (EARS) is an active continental rift zone in East Africa. The EAR began developing around the onset of the Miocene, 22–25 million years ago. It was formerly considered to be part of a larger Great Rift Valley that extended north to Asia Minor.

<span class="mw-page-title-main">Passive margin</span> Transition between oceanic and continental lithosphere that is not an active plate margin

A passive margin is the transition between oceanic and continental lithosphere that is not an active plate margin. A passive margin forms by sedimentation above an ancient rift, now marked by transitional lithosphere. Continental rifting forms new ocean basins. Eventually the continental rift forms a mid-ocean ridge and the locus of extension moves away from the continent-ocean boundary. The transition between the continental and oceanic lithosphere that was originally formed by rifting is known as a passive margin.

<span class="mw-page-title-main">Northern Cordilleran Volcanic Province</span> Geologic province in the Pacific Northwest of North America

The Northern Cordilleran Volcanic Province (NCVP), formerly known as the Stikine Volcanic Belt, is a geologic province defined by the occurrence of Miocene to Holocene volcanoes in the Pacific Northwest of North America. This belt of volcanoes extends roughly north-northwest from northwestern British Columbia and the Alaska Panhandle through Yukon to the Southeast Fairbanks Census Area of far eastern Alaska, in a corridor hundreds of kilometres wide. It is the most recently defined volcanic province in the Western Cordillera. It has formed due to extensional cracking of the North American continent—similar to other on-land extensional volcanic zones, including the Basin and Range Province and the East African Rift. Although taking its name from the Western Cordillera, this term is a geologic grouping rather than a geographic one. The southmost part of the NCVP has more, and larger, volcanoes than does the rest of the NCVP; further north it is less clearly delineated, describing a large arch that sways westward through central Yukon.

The Anahim hotspot is a hypothesized hotspot in the Central Interior of British Columbia, Canada. It has been proposed as the candidate source for volcanism in the Anahim Volcanic Belt, a 300 kilometres long chain of volcanoes and other magmatic features that have undergone erosion. This chain extends from the community of Bella Bella in the west to near the small city of Quesnel in the east. While most volcanoes are created by geological activity at tectonic plate boundaries, the Anahim hotspot is located hundreds of kilometres away from the nearest plate boundary.

<span class="mw-page-title-main">Geology of the Pacific Northwest</span> Geology of Oregon and Washington (United States) and British Columbia (Canada)

The geology of the Pacific Northwest includes the composition, structure, physical properties and the processes that shape the Pacific Northwest region of North America. The region is part of the Ring of Fire: the subduction of the Pacific and Farallon Plates under the North American Plate is responsible for many of the area's scenic features as well as some of its hazards, such as volcanoes, earthquakes, and landslides.

Non-volcanic passive margins (NVPM) constitute one end member of the transitional crustal types that lie beneath passive continental margins; the other end member being volcanic passive margins (VPM). Transitional crust welds continental crust to oceanic crust along the lines of continental break-up. Both VPM and NVPM form during rifting, when a continent rifts to form a new ocean basin. NVPM are different from VPM because of a lack of volcanism. Instead of intrusive magmatic structures, the transitional crust is composed of stretched continental crust and exhumed upper mantle. NVPM are typically submerged and buried beneath thick sediments, so they must be studied using geophysical techniques or drilling. NVPM have diagnostic seismic, gravity, and magnetic characteristics that can be used to distinguish them from VPM and for demarcating the transition between continental and oceanic crust.

<span class="mw-page-title-main">Volcanism of Eastern Canada</span>

The volcanism of Eastern Canada includes the hundreds of volcanic areas and extensive lava formations in Eastern Canada. The region's different volcano and lava types originate from different tectonic settings and types of volcanic eruptions, ranging from passive lava eruptions to violent explosive eruptions. Eastern Canada has very large volumes of magmatic rock called large igneous provinces. They are represented by deep-level plumbing systems consisting of giant dike swarms, sill provinces and layered intrusions. The most capable large igneous provinces in Eastern Canada are Archean age greenstone belts containing a rare volcanic rock called komatiite.

<span class="mw-page-title-main">Volcanism of Northern Canada</span> History of volcanic activity in Northern Canada

Volcanism of Northern Canada has produced hundreds of volcanic areas and extensive lava formations across Northern Canada. The region's different volcano and lava types originate from different tectonic settings and types of volcanic eruptions, ranging from passive lava eruptions to violent explosive eruptions. Northern Canada has a record of very large volumes of magmatic rock called large igneous provinces. They are represented by deep-level plumbing systems consisting of giant dike swarms, sill provinces and layered intrusions.

<span class="mw-page-title-main">Mackenzie Large Igneous Province</span>

The Mackenzie Large Igneous Province (MLIP) is a major Mesoproterozoic large igneous province of the southwestern, western and northwestern Canadian Shield in Canada. It consists of a group of related igneous rocks that were formed during a massive igneous event starting about 1,270 million years ago. The large igneous province extends from the Arctic in Nunavut to near the Great Lakes in Northwestern Ontario where it meets with the smaller Matachewan dike swarm. Included in the Mackenzie Large Igneous Province are the large Muskox layered intrusion, the Coppermine River flood basalt sequence and the massive northwesterly trending Mackenzie dike swarm.

<span class="mw-page-title-main">Opening of the North Atlantic Ocean</span> Breakup of Pangea

The opening of the North Atlantic Ocean is a geological event that has occurred over millions of years, during which the supercontinent Pangea broke up. As modern-day Europe and North America separated during the final breakup of Pangea in the early Cenozoic Era, they formed the North Atlantic Ocean. Geologists believe the breakup occurred either due to primary processes of the Iceland plume or secondary processes of lithospheric extension from plate tectonics.

<span class="mw-page-title-main">Irnini Mons</span> Mountain on Venus

Irnini Mons is a volcanic structure on the planet Venus, and is named after the Assyro-Babylonian goddess of cedar-tree mountains. It has a diameter of 475 km (295 mi), a height of 1.75 km (1.09 mi), and is located in Venus' northern hemisphere. More specifically, it is located in the central Eistla Regio region at in the V-20 quadrangle. Sappho Patera, a 225 km (140 mi) diameter wide, caldera-like, depression tops the summit of Irnini Mons. The primary structural features surrounding Irnini Mons are graben, seen as linear depressed sections of rock, radiating from the central magma chamber. Also, concentric, circular ridges and graben outline the Sappho Patera depression at the summit. The volcano is crossed by various rift zones, including the north-south trending Badb Linea rift, the Guor Linea rift extending to the northwest, and the Virtus Linea rift continuing to the southeast.

The Tyrrhenian Basin is a sedimentary basin located in the western Mediterranean Sea under the Tyrrhenian Sea. It covers a 231,000 km2 area that is bounded by Sardinia to the west, Corsica to the northwest, Sicily to the southeast, and peninsular Italy to the northeast. The Tyrrhenian basin displays an irregular seafloor marked by several seamounts and two distinct sub-basins - the Vavilov and Marsili basins. The Vavilov deep plain contains the deepest point of the Tyrrhenian basin at approximately 3785 meters. The basin trends roughly northwest–southeast with the spreading axis trending northeast–southwest.

<span class="mw-page-title-main">Plate theory (volcanism)</span>

The plate theory is a model of volcanism that attributes all volcanic activity on Earth, even that which appears superficially to be anomalous, to the operation of plate tectonics. According to the plate theory, the principal cause of volcanism is extension of the lithosphere. Extension of the lithosphere is a function of the lithospheric stress field. The global distribution of volcanic activity at a given time reflects the contemporaneous lithospheric stress field, and changes in the spatial and temporal distribution of volcanoes reflect changes in the stress field. The main factors governing the evolution of the stress field are:

  1. Changes in the configuration of plate boundaries.
  2. Vertical motions.
  3. Thermal contraction.

Intraplate volcanism is volcanism that takes place away from the margins of tectonic plates. Most volcanic activity takes place on plate margins, and there is broad consensus among geologists that this activity is explained well by the theory of plate tectonics. However, the origins of volcanic activity within plates remains controversial.

Magmatism along strike-slip faults is the process of rock melting, magma ascent and emplacement, associated with the tectonics and geometry of various strike-slip settings, most commonly occurring along transform boundaries at mid-ocean ridge spreading centres and at strike-slip systems parallel to oblique subduction zones. Strike-slip faults have a direct effect on magmatism. They can either induce magmatism, act as a conduit to magmatism and magmatic flow, or block magmatic flow. In contrast, magmatism can also directly impact on strike-slip faults by determining fault formation, propagation and slip. Both magma and strike-slip faults coexist and affect one another.

References

  1. 1 2 3 4 5 Geoffroy, Laurent (2005). "Volcanic passive margins". Comptes Rendus Geoscience. 337 (16): 1395–1408. Bibcode:2005CRGeo.337.1395G. doi:10.1016/j.crte.2005.10.006.
  2. 1 2 3 4 5 6 7 8 Marten A., Menzies; et al. (2002). "Characteristics of volcanic rifted margins". Geological Society of America Special Paper. 362: 1–14.
  3. 1 2 3 4 5 Okay, Nilgün (1995). Thermal development and rejuvenation of the marginal plateaus along the transtensional volcanic margins of the Norwegian–Greenland Sea. The City University of New York.{{cite book}}: CS1 maint: location missing publisher (link)
  4. 1 2 Gernigon, Laurent; et al. (20 March 2005). "Norwegian Volcanic Margin". www.mantleplumes.org. Retrieved 2008-12-08.
  5. 1 2 3 4 Coffin, Millard F.; Olav Eldholm (February 1994). "Large igneous provinces: Crustal structure, dimensions, and external consequences". Reviews of Geophysics. 32 (1): 1–36. Bibcode:1994RvGeo..32....1C. doi:10.1029/93RG02508.
  6. Mutter, John C.; et al. (February 10, 1988). "Convective Partial Melting: A Model for the Formation of Thick Basaltic Sequences During the Initiation of Spreading". Journal of Geophysical Research. 93 (B2): 1031–1048. Bibcode:1988JGR....93.1031M. doi:10.1029/JB093iB02p01031.