This article needs additional citations for verification . (November 2014) (Learn how and when to remove this template message) |
Volvo B57/BB57 | |
---|---|
DP Owens Alexander Y Type bodied Volvo B57 | |
Overview | |
Manufacturer | Volvo |
Production | 1966-1982 |
Assembly | Sweden |
Body and chassis | |
Class | Bus chassis |
Floor type | Step entrance |
Powertrain | |
Engine | 6.7-litre front-mounted I-6 Volvo D70, TD70 [1] |
Chronology | |
Predecessor | Volvo B715 (B57) Volvo B615 (BB57) |
Successor | Volvo B7FA (B57) Volvo B7F (BB57) |
Volvo B57 was a front-engined single-decker bus chassis manufactured by Volvo between 1966 and 1982. Since 1970 it was also available as the Volvo BB57, with the engine mounted on top of the front axle, giving the buses very little front overhang. The BB57 became a kind of replacement for the smaller B54, but as it was larger, the B54 got its true replacement later. The predecessor to BB57, the B615 had gone out of production in 1965, but apparently the demand for such a model was so high that they had to bring it back almost half a decade later, as the B54 proved to be too small.
Both B57 and BB57 could be built in three different wheelbase lengths: 5 metres (B57-50), 5.5 metres (B57-55) and 6 metres (B57-60).
This chassis type was rare in the United Kingdom, but was quite popular in rural parts of the Nordic countries.
Singapore Bus Service introduced a fleet of 350 New Zealand Motor Bodies bodied B57s between 1980 and 1983 following a successful trial of a Metal Sections-bodied demonstrator in 1979. Of these, the first 200 units were fitted with Version 1 of the bodywork, which hard a raised angular roof for the front destination signage, and the balance 150 units fitted with Version 2 of the bodywork, which had a curved roof for the front destination signage. [2] [3] [4] [5] All units were retired and sold to Bus Éireann, Ireland between 1994 and 1998 for use on school bus duties in rural areas.
In Pakistan, the Punjab Urban Transport Corporation placed 300 in service in Lahore. [6] [7]
In Australia, four B57s were purchased by Neville's Bus Service [8] while another was purchased by Cairnstrans. [9]
The Volvo Super Olympian was a low-floor double-decker bus manufactured by Volvo. It replaced the 3-axle version of Volvo Olympian. The chassis had the designated manufacturer code B10TL.
The Volvo B9TL is a low-floor double-decker bus built by Volvo from 2002 until 2018. It superseded the Volvo Super Olympian and the Volvo B7TL. The 2-axle version has been superseded by the Volvo B5TL in 2014 and the 3-axle version has been superseded by the Volvo B8L in 2018.
Wrightbus is a Northern Ireland based bus manufacturer and a pioneer of the low-floor bus. The company was established in 1946 by Robert Wright and was run by his son William Wright.
The Mercedes-Benz O305 was a highly successful single deck, double deck and articulated bus manufactured by Mercedes-Benz in Mannheim, West Germany from 1969 until 1987. It was built as either a complete bus or a bus chassis and was the Mercedes-Benz adaptation of the unified German VöV-Standard-Bus design, that was produced by many different bus manufacturers including Büssing, Magirus-Deutz, MAN, Ikarus, Gräf/Steyr, Heuliez, Renault, and Pegaso. The O305 was designed for use as a single-decker bus, however it was later redesigned to accommodate double-decker bodies.
Volgren is an Australian bus bodybuilder.
The Volvo B7RLE is a low-entry single-deck bus chassis manufactured by Volvo. It was superseded by the Volvo B8RLE in 2013.
The Wright Eclipse Gemini is a low-floor double-decker bus body that was built by Wrightbus since 2001, based on the single-deck Wright Eclipse design. The second-generation Eclipse Gemini 2 was launched in 2009, followed by the third-generation Gemini 3 in 2013. Additionally, the body was available on Volvo Super Olympian chassis in Hong Kong between 2003 and 2005, marketed as the Wright Explorer. Production of the Gemini have been suspended as Wrightbus entered administration in September 2019.
The Leyland Olympian was a 2-axle and 3-axle double-decker bus chassis manufactured by Leyland between 1980 and 1993. It was the last Leyland bus model in production.
Dennis Trident 3, is the first low floor tri-axle double-decker bus chassis built by Dennis in the United Kingdom, with a large number purchased by bus companies in Hong Kong, Singapore, the United States and Canada.
The Volvo Ailsa B55 was a front-engined double-decker bus chassis manufactured in Scotland by Ailsa, Volvo's British subsidiary in which it owned 75%, from 1974 until 1985.
Duple Metsec was a bus bodywork builder based in West Midlands of England in the United Kingdom. It usually supplied body kits for bus assembly overseas.
The Volvo B10M is a mid-engined city bus and coach chassis manufactured by the Swedish automaker Volvo between 1978 and 2003. It succeeded the B58 and was equipped with the same 9.6-litre horizontally mounted Volvo diesel engine mounted under the floor behind the front axle. An articulated version under the model name Volvo B10MA was also offered, as was a semi-integral version known as the C10M, with the engine in the middle of the chassis.
The Leyland Atlantean is a predominantly double-decker bus chassis manufactured by Leyland Motors between 1958 and 1986. Only 17 Atlantean chassis were bodied as single deck from new.
The Volvo B59 was a rear-engined bus chassis manufactured by Volvo in Sweden between 1970 and 1979.
The Mercedes-Benz O405 was a highly successful single-decker bus manufactured by Mercedes-Benz from the mid-1980s to the early 2000s as either an integral bus or a bus chassis and was the last VöV SL-II standard bus in production. It was the replacement for the Mercedes-Benz O305 and was widely used in Europe, the United Kingdom, Australia and Singapore with 12,000 produced.
The Volvo Olympian was a rear-engined 2-axle and 3-axle double decker bus chassis manufactured by Volvo at its Irvine, Scotland factory. The first was built in 1992 and entered production in March 1993, replacing the Leyland Olympian.
The Volvo B10BLE was a low-entry single-decker bus chassis manufactured by Volvo in Sweden between 1993 and 2004. The first prototypes were built in 1992, but mass production started in 1993, only a year after the high-floor B10B. It was popular in Australia, Scandinavia and the United Kingdom. It had the engine mounted on the rear overhang of the bus. It became the successor of the city bus version of the B10B and was used as a base for single-decker buses worldwide. The B10BLE was available in diesel powered format, and later in a compressed natural gas powered format with the fuel tanks on the roof of the bus. Its low-floor design was widely promoted by Volvo when it was first launched, on the basis of added convenience to the passengers, and the increase in transport efficiency due to the low-floor design.
The Leyland National is an integrally-constructed British step-floor single-decker bus manufactured in large quantities between 1972 and 1985. It was developed as a joint project between two UK nationalised industries – the National Bus Company and British Leyland. Buses were constructed at a specially built factory at the Lillyhall Industrial Estate, Workington. Styling was carried out by the Italian vehicle stylist Giovanni Michelotti, previously commissioned by both Triumph and Scammell lorries.
The Leyland Leopard was a mid-engined single-decker bus and single-decker coach chassis manufactured by Leyland between 1959 and 1982.
The Leyland Tiger, also known as the B43, was a mid-engined bus and coach chassis manufactured by Leyland between 1981 and 1992. This name had previously been used for a front-engined bus built between 1927 and 1968. It replaced the Leyland Leopard, which had been in production for over 20 years.