The Volvo Super Olympian was a low-floor double-decker bus manufactured by Volvo. It replaced the 3-axle version of Volvo Olympian. The chassis had the designated manufacturer code B10TL.
The Volvo B9TL is a low-floor double-decker bus built by Volvo from 2002 until 2018. It superseded the Volvo Super Olympian and the Volvo B7TL. The 2-axle version has been superseded by the Volvo B5TL in 2014 and the 3-axle version has been superseded by the Volvo B8L in 2018.
The Neoplan Centroliner is a series of low-floor transit buses which was first unveiled in 1997, and mainly built by Neoplan Bus GmbH for the European market. At the time when it was first released, it adopted contemporary technologies like Controller Area Network.
Volgren is an Australian bus and coach body manufacturer.
The Mercedes-Benz Citaro is a single-decker, rigid or articulated bus manufactured by Mercedes-Benz/EvoBus. Introduced in 1997, the Citaro is available in a range of configurations, and is in widespread use throughout Europe and parts of Asia, with more than 55,000 produced by December 2019.
The Scania N112 was a transversely-engined step-entrance single-decker bus, double-decker bus and articulated bus chassis manufactured by Scania between 1978 and 1987.
The Volvo B7RLE is a low-entry single-deck bus chassis manufactured by Volvo. It was superseded by the Volvo B8RLE in 2013.
The Volvo B10M is a mid-engined city bus and coach chassis manufactured by Volvo between 1978 and 2003. It succeeded the B58 and was equipped with the same 9.6-litre horizontally mounted Volvo diesel engine mounted under the floor behind the front axle. An articulated version under the model name Volvo B10MA was also offered, as was a semi-integral version known as the C10M, with the engine in the middle of the chassis.
The Mercedes-Benz OC 500 LE is a modular, heavy-duty, twin-axle bus chassis produced by Mercedes-Benz/EvoBus Ibérica, Spain. It was designed as a modular platform for low-entry city, suburban, and intercity buses with a maximum gross vehicle weight of 19.1 tonnes. The main modules consist of: driver's pedestal, front axle, buggy centre section, drive axle and engine. It has much in common with the chassis used for the Mercedes-Benz Citaro integral bus range, and also the raised floor OC 500 RF coach chassis. The engine is horizontally mounted over the rear overhang.
The Mercedes-Benz O405 is a single-decker bus manufactured by Mercedes-Benz from the mid-1980s to the early 2000s as either an integral bus or a bus chassis; it was the last VöV SL-II standard bus in production. It replaced the O305 and was widely used in Europe, the United Kingdom, Australia and Singapore with 12,000 produced.
The Dennis Trident 2 is a 2-axle low-floor double-decker bus chassis originally manufactured by Dennis, which was unveiled in 1997 and replaced the Dennis Arrow. It was built by TransBus after Dennis was incorporated into the group in 2001, then from 2004, it was built by Alexander Dennis following the collapse of TransBus.
The Volvo B10BLE is a rear-engined low-entry single-decker bus chassis manufactured by Volvo in Sweden between 1993 and 2004. The first prototypes were built in 1992, but mass production started in 1993, only a year after the high-floor B10B. It was popular in Australia, Scandinavia and the United Kingdom. It had the engine mounted on the rear overhang of the bus. It became the successor of the city bus version of the B10B and was used as a base for single-decker buses worldwide. The B10BLE was available in diesel powered format, and later in a compressed natural gas powered format with the fuel tanks on the roof of the bus. Its low-floor design was widely promoted by Volvo when it was first launched, on the basis of added convenience to the passengers, and the increase in transport efficiency due to the low-floor design.
BusTech Group is an Australian bus-building manufacturer with production facilities in Rocklea, Queensland, Edinburgh Adelaide, South Australia and Burnie, Tasmania. BusTech Group produces fully built up integral route buses, school buses and double deck buses and also produces single deck bus bodies, largely built on European chassis from manufacturers such as Mercedes-Benz, Volvo and Scania, predominantly under their VST model line. As of 2022, BusTech Group was actively delivering new buses into Queensland, South Australia, Victoria, New South Wales, Tasmania and the ACT.
The Scania K series is a series of chassis in Scania's city bus and coach range with longitudinally, straight-up mounted engine at the rear, replacing the K- and L-type (L94) chassis of the 4 series. The K series was first presented on Busworld 2005 in Kortrijk, Belgium, and models were available from 2006.
The Scania 4-series low floor city bus and coach range was introduced by Scania in 1997 as a successor to the 3-series bus range.
Custom Denning is an Australian bus body builder based in St Marys, New South Wales.
The Volvo B11R is a 10.8-litre engined coach chassis available as both two- and tri-axle from Volvo since 2011. It was introduced as the second of the Volvo BXXR series, replacing the rest of the B12B range in 2011, and later its fellow BXXR platform model, the B13R in 2013.
First announced in August 2012, the Volvo B5RLEH, also known as Volvo B5RH and Volvo B215RH, is a hybrid-electric single-decker bus chassis manufactured by Volvo since 2013, initially only available in the Asia-Pacific region.
The Volvo B8RLE is a 7.7-litre-engined low-entry bus chassis manufactured by Volvo since 2013 for left-hand drive markets. It was designed as a replacement for the B7RLE and the B9RLE. The right-hand drive version was launched in November 2014.
The Volvo 8500 was an aluminium body single-deck city/intercity bus manufactured by Volvo between 2001 and 2011. It was available with medium floor as two-axle, tri-axle (B12M) and the articulated 8500A (B12MA). As the low-entry Volvo 8700LE as two-axle, tri-axle (B12BLE) and the articulate 8500LEA (B9SALE). From 2005 it was also available as the fully low floor Volvo 7500, which even came in a bi-articulated version. In the early years, the 8500LE was available with CNG on the B10BLE chassis. Later, CNG was only available on the 7500.
