Wolverton railway works

Last updated

Wolverton Railway Works
Wolverton Carriage Works geograph-2219108.jpg
View northward ca. 1954, outside the Carriage Works. The locomotives are ex-LNWR 'Special' 2F 0-6-0 saddle-tanks, Carriage Dept.
Nos. 3, 6 and 7.
Wolverton railway works
General information
StatusIn use
Town or city Wolverton, Milton Keynes
Country England
Coordinates 52°03′47″N0°48′58″W / 52.063°N 0.816°W / 52.063; -0.816
Construction started1836
Completed1838
Client London and Birmingham Railway
Design and construction
Other designers Edward Bury
Train workshop, Wolverton works WolvWorks2-7-07.png
Train workshop, Wolverton works

Wolverton railway works, known locally as Wolverton Works or just The Works, was established in Wolverton, Buckinghamshire, by the London and Birmingham Railway Company in 1838 at the midpoint of the 112-mile-long (180-kilometre) route from London to Birmingham. The line was developed by Robert Stephenson following the great success of the Liverpool and Manchester Railway line.

Contents

The Victorian era new towns of Wolverton and New Bradwell were built to house the workers and service the works. The older towns of Stony Stratford and Newport Pagnell grew substantially too, being joined to it by the Wolverton and Stony Stratford Tramway and the Wolverton to Newport Pagnell Line (a branch line), respectively. The trams were also hauled by steam locomotives: the tram cars were certainly the largest ever in the UK and possibly the world. In modern times, Wolverton railway works remains notable as the home of the British Royal Train but otherwise is very much reduced from its heyday.

As of 2013, the facility is much reduced: a full-scale train maintenance, repairs and refurbishment works is operated at the western end of the site, the central area is derelict but slated for redevelopment, the eastern end is a Tesco store with canal-side housing development at the extreme eastern end.

History

Foundation

Old Wolverton railway works with Stephenson bridge, adjoins and crosses the Grand Union Canal Wolverton1.jpg
Old Wolverton railway works with Stephenson bridge, adjoins and crosses the Grand Union Canal

The 1833 Act of Parliament approving the London and Birmingham Railway included a clause that specified that a railway works be built around the mid-point, as it was considered scientifically unsafe at the time for railway locomotives to move more than 50 miles (80 km) without further inspection. After surveying all possible sites, Wolverton was chosen due to its co-location alongside the wharfing facilities of the Grand Union Canal, thereby also enabling the railway company to gain an easy agreement to build a viaduct over the canal company's land at this point. [1]

The actual site was selected in October 1836 by Edward Bury, an engineer and locomotive manufacturer of Liverpool, who had been appointed in May 1836 as contractor for working the company's trains. Under this arrangement, the company would provide locomotives to Bury's specification while he would maintain them in good repair and convey passengers and goods at a rate per person, per ton and per mile, at a speed not exceeding 22.5 mph (36.2 km/h). Seven manufacturers, including Bury's firm, supplied the original stock of engines. Because of the unforeseen demand for increased speed, this contract for working the line was annulled in July 1839; thereafter Bury was employed as the manager of the locomotive department on a salary, with a profits bonus. [2] [ verification needed ]

Locomotive works

At first, the works was used for the maintenance and repair of locomotives purchased from outside firms. Two locomotives were built there in 1845 and 1846, and another in 1848, but following enlargement of the buildings and increased facilities, they were turned out in quantity. In total, 166 locomotives were built at Wolverton. These included three varieties of the 2-2-2 LNWR Bloomer Class, 86 of the Wolverton Express Goods 0-6-0 and four varieties of 0-4-2. [2]

In 1846, the London and Birmingham became part of the London and North Western Railway (LNWR); Bury resigned in 1847 and was succeeded by James E. McConnell as locomotive superintendent of the LNWR Southern Division. An innovative engineer who during his tenure experimented with hollow axles, rubber springs, brakes working on the rails, and elaborate boilers and fireboxes, but perhaps his greatest claim to fame is the 2-2-2 Bloomer type of 1851, which was closely based on a Bury design. A total of seventy-four were built in three classes between 1851 and 1862, similar in design and layout but different in dimensions. In 1861 the cost-conscious Richard Moon was appointed Chairman of the LNWR, and became very critical of McConnell; after the Board passed a motion of censure on him, McConnell was obliged to resign in March 1862. [2]

In 1862, Moon drove through a policy that Crewe would become the sole locomotive manufacturing centre for the LNWR, and so the last of the 166 Wolverton-built locomotives left the works in September 1863. [1]

Carriage works

Having retained its maintenance role, in 1865 Wolverton was designated as the LNWR Carriage Works, eventually becoming the largest carriage works in the UK. Initially Wolverton produced numbers of 27 feet 6 inches (8.38 m) six-wheel carriages on a rigid wheelbase. In 1873, a sleeper service was introduced to Glasgow, and in 1875 to Liverpool and Holyhead. The carriages for these were again three-axle, limited it is said, to 32 feet (9.8 m) by the traverser in the Euston carriage sheds. This remained the pattern for many years, though some used Webb's patent "radial truck".

The 1880s saw the introduction of first-class twin-car sets with an interconnecting gangway. The 1881 sleeping cars for the Irish Mail were of this form, and in 1889 some of the first-class twins were adapted to become the LNWR's first dining cars. In 1883, 44 feet (13 m) sleeping cars were introduced on the Glasgow service, but even though bogies had come into use on other railways, the LNWR preferred to simply add an extra radial truck.

This configuration remained in use until 1893, when Charles Park built a rake of corridor coaches for the expresses to Edinburgh with six-wheeled bogies. This was first and third class only, although second class remained for many other services until 1911. In 1892, the non-automatic brake finally disappeared and in 1896 Stone's patent electric train lighting was introduced, along with communication cords.

20th century

In 1901, Wolverton was the first railway works to use electricity for lighting and driving machinery throughout. All coaches for principal services now included corridor connections and were mounted on bogies instead of radial trucks.[ clarification needed ]

During World War I, the works altered carriages to be used as ambulance trains both within the UK and overseas. Part of the works was also turned over for use by the Ministry of Munitions. [1] In 1923 when the LNWR merged into the London, Midland and Scottish Railway (LMS), wagon building was introduced. From 1926, the works was supplied with electricity from Northampton Power Station.

At the outbreak of World War II, as a major manufacturing facility, the works was camouflaged, with the exterior walls still showing signs of green paint. No Luftwaffe bombs landed on Wolverton, [3] although nearby New Bradwell suffered the destruction of some housing and the loss of five lives due to aerial bombing. [4] The works itself ceased all railway-associated work, instead using its vast engineering and wood working to produce Horsa gliders for the D-Day airborne assault. It also repaired Whitley bombers, Hawker Typhoon wings and converted some seven hundred commercial motor vans into armoured vehicles. [1]

It continued its carriage and work construction work after the war, including making large numbers of the all-new British Railways Mark 1 carriage, until the intervention of Richard Beeching. [1] In 1962, the works was downgraded to a repair facility, with the last new vehicle being completed in 1963. By 1964, the workforce had dropped from 4,000 to 2,000, [1] but the works had picked up new work through the repair and maintenance of the British Rail Class 304 electric multiple units. Although no new general service carriages were built, twenty four vehicles were built in 1977 for the Royal Mail, and twenty one diesel multiple units for the Northern Ireland Railways. In February 1986, British Rail Engineering Limited split into two new groups, with Wolverton becoming part of the new BR Maintenance Group, which again reduced staff to 850. [1]

Royal train

Wolverton has a long history associated with providing carriages for the British Royal Train. The works produced Queen Victoria's 1869 saloon, comprising two six-wheelers joined by the first bellows gangway in Europe; the carriage is now part of the collection of the National Railway Museum, York. Further Royal coaches were built in 1903 for King Edward VII, and in 1961 for Queen Elizabeth II.

The most recent Royal train was fitted out at Wolverton in 1977. It comprises eight prototype British Rail Mark 3 coaches built in 1972 for the High Speed Train, refurbished with two Royal Saloons. The Royal Train is operated and maintained by DB Schenker and stored within the remaining Knorr Bremse service depot. Ownership and management of the Royal Train Service is with Network Rail. [5]

21st century

The carriage maintenance works consolidated its operations in the western end of the site. In July 2013, the then operators, Railcare, entered administration, with immediate redundancy for many of the 225 workforce. [6] In August 2013, Knorr-Bremse purchased Railcare, including the sites in Glasgow and Wolverton. The company operated as KnorrBremse RailServices (UK) Limited, until 9 November 2018, when the business was bought by Mutares. Wolverton Works is now operated by Gemini Rail Services UK Limited (a division of Mutares), although the site is owned by the St. Modwen Properties plc, a property development group. Although much of the original works site has been redeveloped and further redevelopment is planned for most of the remainder, the western end remains in use for railway carriage maintenance and this use continues. [7]

The eastern end of the original works site has become a canal-side housing development, most as "new build" and some as repurposed historic buildings. The central area is now a Tesco supermarket, a community centre and a Lidl supermarket. The Tesco frontage has been built to resemble the original buildings; the community centre occupies the former bath house and a charity bookshop occupies the former LNWR firestation. Other artefacts of its cultural heritage are held at Milton Keynes Museum.

The site of the former marshalling yards beside the West Coast Main Line is used as an entrepot for white goods, but this is purely a road distribution centre and there are no rail links to the warehouses, although the access line to the rail works is close by.

Heritage

Listed structures

Stephenson bridge made from cast iron girders Wolverton2.jpg
Stephenson bridge made from cast iron girders
Landslip on Wolverton Viaduct Wolverton viaduct.jpg
Landslip on Wolverton Viaduct

The original bridge, Bridge no. 171C, across the Grand Union canal was built in 1834-5 (chief engineer, Robert Stephenson) and is a grade II* listed building. [8] The bridge is composed of numerous cast iron girders, many made by the Butterley Company Iron works. It is a rare survival since most similar bridges were removed at the end of the Victorian era. The more imposing Wolverton Viaduct to the north of the old station yard is one of the most impressive viaducts on the line, and was built in 1838 across the River Ouse valley. There were many problems encountered during construction, especially landslips on the adjacent embankment. They can still be seen just south of the viaduct and were portrayed by John Cooke Bourne in his description of the railway published just after it had opened.

See also

Related Research Articles

<span class="mw-page-title-main">London and North Western Railway</span> Former British railway company

The London and North Western Railway was a British railway company between 1846 and 1922. In the late 19th century, the LNWR was the largest joint stock company in the world.

<span class="mw-page-title-main">London and Birmingham Railway</span> Early British railway company (1837–1846)

The London and Birmingham Railway (L&BR) was a railway company in the United Kingdom, in operation from 1833 to 1846, when it became part of the London and North Western Railway (L&NWR).

<span class="mw-page-title-main">Watford Junction railway station</span> Principal railway station in Hertfordshire, England

Watford Junction is a railway station serving the town of Watford in Hertfordshire, England. The station is on the West Coast Main Line (WCML), 17 miles 34 chains (28 km) from London Euston and the Abbey Line, a branch line to St Albans. Journeys to London take between 16 and 52 minutes, depending on the service. Trains also run to Clapham Junction and East Croydon, via the West London line. The station is a major hub for local bus services and the connecting station for buses to Warner Bros. Studio Tour London – The Making of Harry Potter. The station is located north of a viaduct over the Colne valley and immediately south of Watford Tunnel.

<span class="mw-page-title-main">Wolverton</span> Human settlement in England

Wolverton is a constituent town of Milton Keynes, England. It is located in the north-west of the city, beside the West Coast Main Line, the Grand Union Canal and the river Great Ouse. It is the administrative seat of Wolverton and Greenleys civil parish.

<span class="mw-page-title-main">Wolverton railway station</span> Railway station in Milton Keynes, England

Wolverton railway station serves Wolverton, a constituent town of Milton Keynes, Buckinghamshire, England. The station is on the West Coast Main Line, about 52 miles (84 km) from Euston, between Milton Keynes Central and Northampton. The station is one of the seven stations serving the Milton Keynes urban area.

<span class="mw-page-title-main">Hemel Hempstead railway station</span> Railway station in Hertfordshire, England

Hemel Hempstead railway station lies in Boxmoor, on the western edge of the town of Hemel Hempstead, Hertfordshire, England. It is located 24+12 miles (39.4 km) north-west of London Euston on the West Coast Main Line. The station is managed by London Northwestern Railway, who operate its train services along with Southern.

Locomotives of the London and North Western Railway. The London and North Western Railway (LNWR) Locomotive Department was headquartered at Crewe from 1862. The Crewe Works had been built in 1840–43 by the Grand Junction Railway (GJR).

<span class="mw-page-title-main">Crewe Works</span> British railway engineering facility

Crewe Works is a British railway engineering facility located in the town of Crewe, Cheshire. The works, which was originally opened by the Grand Junction Railway in March 1843, employed around 7,000 to 8,000 workers at its peak. In the 1980s much of the engineering works were closed. Most of the site has been redeveloped, but the remaining parts are owned and operated by Alstom.

<span class="mw-page-title-main">Locomotive No. 1</span>

Locomotive No. 1 hauled the first passenger train in New South Wales, Australia. It was built by Robert Stephenson and Company. In 1846, the Sydney Railway Company was formed with the objective of building a railway line between Sydney and Parramatta. No. 1 was one of four locomotives that arrived by sea from the manufacturer in January 1855. The first passenger train hauled by No. 1 was a special service from Sydney Station to Long Cove viaduct on 24 May 1855, Queen Victoria's birthday.

<span class="mw-page-title-main">New Bradwell</span> Civil parish in Milton Keynes, England

New Bradwell is (mainly) an Edwardian era village, modern district and civil parish in north-west Milton Keynes, Buckinghamshire, England, about 2 miles (3.2 km) north-west of Central Milton Keynes. Together with Wolverton, it was built primarily to house the workers on the Wolverton railway works.

<span class="mw-page-title-main">Glasgow Works</span>

Glasgow Works, formerly the St Rollox Works, is a railway rolling stock heavy maintenance and repair works established in the 1850s in the Glasgow district of Springburn by the Caledonian Railway Company, and known locally as 'the Caley'.

<span class="mw-page-title-main">Bletchley TMD</span> Traction maintenance depot in the UK

Bletchley TMD is a railway traction maintenance depot situated in Bletchley, Milton Keynes in Buckinghamshire, to the north east of Bletchley railway station, on a siding off the Marston Vale line. The depot is operated by West Midlands Trains.

<span class="mw-page-title-main">Wolverton and Stony Stratford Tramway</span>

The Wolverton and Stony Stratford Tramway was a narrow gauge street tramway connecting Wolverton railway station and the Wolverton Works of the London and North Western Railway (LNWR) with Stony Stratford, Buckinghamshire. Although its financial situation was always precarious, except for a period of just under two years between 1889 and 1891, the line was in continuous operation from 1887 to 1926. Between May 1888 to December 1889, an extension also ran from Stony Stratford to Deanshanger in Northamptonshire, via Old Stratford. Unusually for a British street tramway, it was worked entirely by steam locomotives, and was the last of its type to remain in operation.

<span class="mw-page-title-main">Transport in Buckinghamshire</span>

Transport in Buckinghamshire has been shaped by its position within the United Kingdom. Most routes between the UK's two largest cities, London and Birmingham, pass through this county. The county's growing industry first brought canals to the area, then railways and then motorways.

<span class="mw-page-title-main">Wolverton–Newport Pagnell line</span> Railway branch line in Buckinghamshire, UK

The Wolverton–Newport Pagnell line was a railway branch line in Buckinghamshire, United Kingdom running from Wolverton on the London and North Western Railway (LNWR) to Newport Pagnell. The line fully opened to passengers in 1867. An extension to Olney was planned in 1865, but this scheme was abandoned after partial construction. Earthworks along the route of the extension still exist in Bury Field, and plaques exist detailing the history of the failed project.

<span class="mw-page-title-main">Edward Bury</span> English locomotive manufacturer (1794–1858)

Edward Bury was an English locomotive manufacturer. Born in Salford, Lancashire, he was the son of a timber merchant and was educated at Chester.

<span class="mw-page-title-main">LNWR Bloomer Class</span>

Bloomer was a name used to refer to three similar classes of 2-2-2 express passenger locomotives designed by James McConnell for the Southern Division of the London and North Western Railway (LNWR). A total of seventy-four were built between 1851 and 1862. The classes were similar in design and layout but differed in dimensions.

<span class="mw-page-title-main">Wolverton Works canal bridge</span> Bridge in Milton Keynes, England

The Wolverton Works canal bridge, or Bridge no. 171C, is a bridge over the Grand Union Canal in Wolverton, Milton Keynes in south-eastern England. It carries a spur from the West Coast Main Line into Wolverton Works. It was built in 1834–1835 for the London and Birmingham Railway under the supervision of Robert Stephenson and has been little modified since. It is a grade II* listed building.

<span class="mw-page-title-main">Wolverton Viaduct</span> Bridge carrying WCML over the Great Ouse

Wolverton Viaduct is a railway bridge carrying the West Coast Main Line over the River Great Ouse to the north of Wolverton, part of Milton Keynes, in south-eastern England. Built in 1838 for the London and Birmingham Railway (L&BR) to the design of Robert Stephenson, it was the largest viaduct on the L&BR's route. It is in the centre of Wolverton Embankment, itself the largest on the line. It has six brick arches and covers a distance of 660 feet, reaching a maximum height of 57 feet above the river, and terminating in substantial abutments which contain decorative arches. The viaduct and embankment feature in drawings by John Cooke Bourne. Several contemporary commentators likened Stephenson's bridges to Roman aqueducts. Some modern engineers and railway historians have suggested that Wolverton Viaduct is not as innovative or impressive as some that followed but nonetheless praised its visual impact.

<span class="mw-page-title-main">Royal Train Shed</span> Building

The Royal Train Shed was part of the former Wolverton railway works in Milton Keynes, southern England. It was built in 1899 and changed use several times before it was used to house the British Royal Train from 1963 to 1991. The building has since been converted into residential use and is now a Grade II listed building.

References

  1. 1 2 3 4 5 6 7 "Wolverton Works". Milton Keynes Museum . Retrieved 16 August 2013.
  2. 1 2 3 Jack, Harry (2001). Locomotives of the LNWR Southern Division – London & Birmingham Railway and Wolverton Locomotive Works. Locomotives of the LMSR (series). Railway Correspondence and Travel Society. ISBN   9780901115898. OCLC   50330788..
  3. "Bombs Over Bucks - 75th Anniversary 1940 -1945". buckscc.gov.uk. 1 May 2019. Retrieved 13 February 2021.
  4. "Bombs over Bucks!". Buckinghmshire Council. 11 June 2021. Retrieved 20 May 2022. St Giles Street and St James Street New Bradwell ... 3 houses demolished, 165 houses damaged, 5 killed, 3 seriously and 17 slightly injured. Occurred between 19th and 21st October.
  5. "Trains". Official Website of the British Monarchy. Archived from the original on 6 March 2016.
  6. "Railcare jobs to go in Glasgow and Milton Keynes". BBC News. 2 August 2013.
  7. Murrer, Sally (2 November 2020). "Historic Wolverton Works to be saved from demolition in Milton Keynes, say rail experts". Milton Keynes Citizen . Retrieved 18 August 2021.
  8. Historic England. "RAILWAY BRIDGE (171C) GRAND UNION CANAL (1246107)". National Heritage List for England . Retrieved 5 August 2018.

Further reading