Bantam BRC

Last updated
Bantam BRC-40
Bantam-jeep-1.jpg
Overview
Manufacturer American Bantam
Production1940–1943
Assembly Butler, Pennsylvania
Body and chassis
Class off-road vehicle
Body style open
Related Willys MB
Powertrain
Engine 112 cu in (1.8 L) Continental BY-4112 I4
Dimensions
Wheelbase 2,020 mm (80 in)
Length3,240 mm (128 in)
Width1,430 mm (56 in)
Height1,780 mm (70 in) (with roof)
Curb weight 950 kg (2,090 lb)
Chronology
Successor Willys MB
First prototype of Bantam Bantam-no1-19400923.jpg
First prototype of Bantam

Bantam BRC is an American off-road vehicle designed during World War II, constructed in 1940, and the precursor to the Jeep. Produced in a relatively small number of 2,642 units, in several versions, it was used by the United States, the United Kingdom, and the Soviet Union. The basic version of the model was the BRC-40 (Bantam Reconnaissance Car 40).

Contents

History of the project

Bantam BRC-60 Senator John Heinz History Center - IMG 7665.JPG
Bantam BRC-60
Bantam BRC-40 Bantam-jeep-3.jpg
Bantam BRC-40
Bantam BRC-40 towing a 37 mm gun M3 captured "in motion" Bantam jeep flying 37mm sm.jpg
Bantam BRC-40 towing a 37 mm gun M3 captured "in motion"

In preparation for the United States' entry into World War II, the Department of War announced an invitation to tender in July 1940 for a light military vehicle intended for reconnaissance, liaison, and other purposes. It was to be classified as a quarter-ton, 4x4 truck. [1] Earlier, on 27 May 1940, the Technical Armament Committee had approved the vehicle's specifications, which included all-wheel drive, a simple open body with a nearly rectangular outline, three seats (with a rear double seat), a wheelbase of 80 inches (2,032 mm), 47-inch (1,194 mm) axle track, and a maximum weight of 590 kg. [1] The value of the tender was set at $175,000. Due to the stringent requirements and very short deadlines – 49 days to deliver the prototype and 75 days to build a series of 70 vehicles – only two out of 135 American car manufacturers expressed interest in participating: American Bantam and Willys-Overland. [1]

American Bantam, based in Butler, Pennsylvania, was a small car manufacturer plagued by financial difficulties but saw an opportunity in the tender. [1] Bantam received the specifications on July 17 and immediately engaged independent designer Karl Probst from Detroit as the lead designer for the vehicle. [1] On his way to Butler, Probst ordered drive axles and a transfer case with a two-speed reduction drive from Spicer in Toledo. Probst arrived on 18 July 1940, and the preliminary design was ready the next day. [1] The vehicle’s engine was a 4-cylinder Continental BY-4112 gasoline engine with a displacement of 1,835 cc and a power output of 48 hp. [1] The axles were sourced from the Studebaker Champion, with Spicer joints. The designers, however, chose to disregard the weight limit, deeming it unattainable, and planned for a weight of 841 kg (the prototype eventually weighed 922 kg). [1] Bantam submitted their offer on July 22, and on August 5, it won the tender, surpassing Willys by offering to complete the prototype in 49 days, compared to Willys’ 120 days. [1]

Bantam completed the prototype on time, delivering it on September 23 on its own wheels to the testing center at Camp Holabird, 275 km away (by that time, the vehicle had traveled only 250 km). [1] The grueling 30-day endurance tests, during which it covered 5,800 km, were successful, and any breakdowns, including frame cracks, were swiftly repaired (any malfunction lasting more than 24 hours would have led to disqualification). [1] Military representatives were impressed by the vehicle's off-road capabilities. On October 27, Bantam was presented to the Armored Weapons Commission at Fort Knox. [1] The first Bantam prototype was referred to as the "pilot model". [1]

Production

After the prototype, Bantam produced 70 pre-series vehicles, designated as Bantam Model 60 or Mk II, [2] also known in literature as BRC-60. [1] The main visual difference was the replacement of rounded stamped fenders from the Bantam passenger car with fenders made from right-angled sheet metal panels and wider entry cutouts on the sides. [1] Like the prototype, these vehicles had a narrowing hood with a rounded grille but were additionally equipped with bar guards for the headlights, which were partially recessed into the fenders. [2] At the army's request, eight vehicles were experimentally equipped with four-wheel steering. [2]

Before delivering the pre-series vehicles, Bantam received an order from the U.S. Army to produce a series of 1,350 improved vehicles, followed by another 72, of which 22 were equipped with all-wheel steering. [3] The production vehicles were designated as BRC-40 (1940, Bantam Reconnaissance Car). The appearance of these vehicles changed: the main difference was the flat, wider hood preferred by the army, with a flat radiator grille similar to the parallel Ford GP vehicles. The headlights remained mounted on the fenders, partially recessed. Apart from the headlight placement, the main visual distinction from Ford GPs and Willys vehicles was the rectangular front fenders with rounded corners. The fuel tank was relocated from the rear of the vehicle to under the driver’s seat, and the windshield became sturdier and split in two. [2] The vehicle’s price was reduced from $1,123 for the first 500 units to $938. [1]

In the U.S., vehicles of this class were generally not intended for combat, but the BRC could carry a .50 caliber M2 Browning heavy machine gun on a pillar mount installed between the front seats, similar to later standard jeeps. [2]

With the selection of the Willys MB as the standard off-road vehicle, Bantam did not receive further orders from the U.S. Army for vehicles, but only for 10,000 trailers for jeeps. [4] Only a limited number of vehicles were produced for foreign buyers – 1,001 BRC-40 vehicles were built for British orders in 1941, and another 150 in 1943 (originally ordered by Yugoslavia). [3] In total, 2,642 vehicles were built, not counting the prototype. [a] One vehicle was assembled by the Checker Cab Company in Kalamazoo, known for its taxi production, though production was not ultimately launched there. [2]

In addition to the U.S. and British armies, these vehicles were also used by the Soviet army through the Lend-Lease program, beginning with the Battle of Moscow in autumn 1941. [4] Soviet Union received 531 BRC-40 vehicles, with 500 delivered by the end of 1942. [5] According to other sources, a total of 808 vehicles were sent to the Soviet Union, about 530 of which were used by the Red Army, with the remainder employed by other services (e.g., adapted as fire engines). [6] In the Soviet Union, the Bantam was colloquially known as the "bantik". [6] A few vehicles also reached the Polish People's Army and Polish state institutions, either through the Soviet Union or later deliveries from the United Nations Relief and Rehabilitation Administration. [7] [8]

Influence on other designs

The second company participating in the bid, Willys-Overland, did not yet have a vehicle design at the time and submitted its bid based on a cost and time analysis. Despite losing the bid, it began designing and building a prototype at its own risk. In pursuit of optimal vehicles, the American Quartermaster Corps (QMC) provided the plans of the Bantam prototype to Willys and Ford for use in their projects, allowing them to observe the prototype during testing (despite Bantam's objections, the Army argued that it had paid for the development and could show it to whomever it chose). [9] Willys’ first prototype of an off-road vehicle, the Willys Quad, similar to and structurally related to the Bantam, was delivered on 11 November 1940. It used the same axles and transfer case from Spicer, but with a stronger in-house engine, the Willys prototype had better performance and ultimately became the basis for the Willys MA model ordered by the Army (1,500 units) and later the mass-produced standard jeep, the Willys MB. [9] Notably, during World War II, in the mechanized cavalry of the United States, particularly in reconnaissance units, the informal term "bantam" was widely used to refer to Willys jeeps. [10]

In October 1940, the U.S. Army also persuaded Ford to participate in developing an off-road vehicle. On 23 November 1940, Ford introduced its prototype, the Ford Pygmy, which also drew from Bantam’s design (it introduced innovations such as a wide, flat hood, later adapted with modifications for the Bantam BRC-40 and the standard Willys MB jeep). [9] The Army ordered 1,500 Ford GP vehicles and later allocated large-scale production of the licensed Willys MB model, the GPW, to Ford. [9]

The term "jeep" for an off-road vehicle became associated with Willys during the war, and the company used this in its marketing materials. [11] Following a complaint by Bantam, however, the Federal Trade Commission in 1948 barred Willys from claiming it was the creator of the jeep, recognizing that the idea and development of the jeep originated at American Bantam in collaboration with certain U.S. Army officers. [11] Despite this, Bantam soon went bankrupt, and in 1950, Willys, which continued to produce its off-road vehicles, subsequently registered Jeep as its trademark. [11]

The Bantam's debut also inspired the development of Soviet off-road vehicles – in January 1941, authorities instructed designers at the GAZ factory to create their own vehicle modeled after the Bantam, as seen in the press. [12] Contrary to some opinions, the resulting GAZ-64 design from March 1941 was not based on American vehicles (to which the Soviets had no access at the time), borrowing only the general design concept, body shape, and similar dimensions. [12] Its improved successor was the better-known GAZ-67. [12]

In 1941, the U.S. Army tested experimental tank destroyers based on the BRC-40 with a 37 mm gun M3 mounted. [13] In the T2 model, the gun with a low protective shield fired forward within a 30° range on each side, while in the T2E1 model, the gun was mounted rotatably in the rear with a 360° field of fire, typically firing rearward. [13] Seven T2 and eleven T2E1 units were built, but the chassis was found to be too light for the gun, which was later removed. [13]

Technical specifications

Dimensions and weights

Powertrain

Suspension

Performance data

Main source: [4]

Notes

  1. ↑ The commonly cited figure is 2,642 units (Ware (2010 , p. 28); Crismon (1983 , p. 212)), yet a summary of orders by Ware (2010 , pp. 43–44) lists a total of 2,643 vehicles. It is possible that one assembled by Checker was included in this count.

Related Research Articles

<span class="mw-page-title-main">Jeep</span> American automobile brand

Jeep is an American automobile brand, now owned by multi-national corporation Stellantis. Jeep has been part of Chrysler since 1987, when Chrysler acquired the Jeep brand, along with other assets, from their previous owner American Motors Corporation (AMC).

<span class="mw-page-title-main">American Bantam</span> Automobile company (1935–1956)

The American Bantam Car Company was an American automobile manufacturing company incorporated in the state of Pennsylvania. American Bantam is credited with inventing the original World War II 1⁄4‑ton jeep in 1940. The company's founders, Roy Evans and William A. Ward Jr., combined resources to purchase the assets of the bankrupt American Austin Car Company in August of 1935 during liquidation.

<span class="mw-page-title-main">Jeep CJ</span> Jeep motor vehicle model

The Jeep CJ models are a series and a range of small, open-bodied off-road vehicles and compact pickup trucks, built and sold by several successive incarnations of the Jeep automobile marque from 1945 through 1986. The 1945 Willys "Universal Jeep" was the world's first mass-produced civilian four-wheel drive car.

<span class="mw-page-title-main">Willys Go Devil engine</span> Reciprocating internal combustion engine

The Willys L134 is a straight-4 flathead automobile engine that was made famous in the Willys MB and Ford GPW Jeep produced during World War II. It powered nearly all the Jeep vehicles built for the U.S. and Allies. It was later used in a variety of civilian Jeep vehicles.

<span class="mw-page-title-main">M151 ¼-ton 4×4 utility truck</span> Motor vehicle

The Truck, Utility, ¼-Ton, 4×4, or simply M151 was the successor to the Korean War M38 and M38A1 Jeep Light Utility Vehicles. The M151 had an integrated body design which offered a little more space than prior jeeps, and featured all-around independent suspension with coil springs. It has since been replaced by the larger AM General HMMWV in most utility roles in frontline use. With some M151A2 units still in U.S. military service in 1999, the M151 series achieved a longer run of service than that of the World War II/Korean War-era MB/GPW, M38, and M38A1 series combined.

<span class="mw-page-title-main">Willys MB</span> U.S. military vehicle of WWII ("Jeep")

The Willys MB and the Ford GPW, both formally called the U.S. Army truck, 1⁄4‑ton, 4×4, command reconnaissance, commonly known as the Willys Jeep, Jeep, or jeep, and sometimes referred to by its Standard Army vehicle supply nr. G-503, were highly successful American off-road capable, light military utility vehicles. Well over 600,000 were built to a single standardized design, for the United States and the Allied forces in World War II, from 1941 until 1945. This also made it the world's first mass-produced four-wheel-drive car, built in six-figure numbers.

Jeep — with a capital J — is a trademarked automotive brand, currently owned by Chrysler, part of Stellantis.

<span class="mw-page-title-main">M422 Mighty Mite</span> U.S. military 4x4 utility truck

The AMC M422 'Mighty Mite', or G-843 by its supply catalog designation, is an extra lightweight ¼-ton 4x4 tactical truck, designed for the United States Marine Corps, to be suitable for helicopter airlift and manhandling. It is noted for its exceptionally short length, and resulting very tight turning circle, while still highway approved for a top speed of 55 mph (89 km/h), and capable of 65 mph (105 km/h) according to its manufacturer, American Motors Corporation (AMC). From 1959 through 1962, just under 4,000 M422 Mighty Mites were built by American Motors for the U.S. Marines.

<span class="mw-page-title-main">Ford GPA</span> US amphibious jeep

The Ford GPA "Seep", with supply catalog number G504, was an amphibious version of the World War II Ford GPW jeep. Over 12 thousand were made and they served with Allied forces in the many theatres of WW2, including the Pacific, Eastern front, and from D-day to the end. After the war as surplus they found many niche roles, and today examples can be found in museums collections or at military history shows.

<span class="mw-page-title-main">Willys M38A1</span> US Army light utility vehicle

The Willys MD, formally the M38A1 Truck, Utility: 1/4 ton, 4x4, or the G‑758 by its U.S. Army Standard Nomenclature supply catalog designation, was a four-wheel drive, military light utility vehicle, made by Willys and Willys Motors / Kaiser Jeep from 1952 to 1971. It was widely procured by the U.S. military from 1952 until 1957, after which U.S. purchases were reduced to the U.S. Marine Corps. The Marine version had minor differences from the units used by other branches.

<span class="mw-page-title-main">GMC CCKW 2½-ton 6×6 truck</span> US WWII "deuce and a half" cargo truck

The GMC CCKW, also known as "Jimmy", or the G-508 by its Ordnance Supply Catalog number, was a highly successful series of off-road capable, 21⁄2-ton, 6×6 trucks, built in large numbers to a standardized design for the U.S. Army, that saw heavy service, predominantly as cargo trucks, in both World War II and the Korean War. The original "Deuce and a Half", it formed the backbone of the famed Red Ball Express that kept Allied armies supplied as they pushed eastward after the Normandy invasion.

<span class="mw-page-title-main">Jeep trailer</span> US Army cargo trailer

The Jeep trailer was a small, 1⁄4 short ton payload rated, cargo trailer, designed in World War II, tailored to be towed by 1/4-ton jeeps. Versions of the quarter-ton jeep trailer remained in military use, by the U.S. or other countries, at least through to the 1990s.

<span class="mw-page-title-main">Chevrolet G506</span> American Army 1 1/2-ton 4x4 truck

The G-506 trucks, 1+1⁄2-ton, 4x4, produced as the Chevrolet G7100 models, were a series of (light) medium four wheel drive trucks used by the United States Army and its allies during and after World War II. This series came in standard cargo, as well as many specialist type bodies.

<span class="mw-page-title-main">Willys</span> American car and truck manufacturing company

Willys was a brand name used by Willys–Overland Motors, an American automobile company, founded by John North Willys. It was best known for its design and production of World War II–era military jeeps (MBs), Willys M38 and M38A1 military jeeps as well as civilian versions, and branding the 'jeep' military slang-word into the '(Universal) Jeep' marque.

<span class="mw-page-title-main">Willys M38</span> Type of 1 4-short-ton (230 kg) 4x4 truck

The Willys MC, formally the 1⁄4-Ton, 4 x 4, Utility Truck M38, or the G‑740 by its U.S. Army Standard Nomenclature supply catalog designation, is a quarter-ton four-wheel drive military light utility vehicle made by Willys between 1949 and 1952. It replaced, and succeeded the World War II Willys MB and Ford GPW models, with a total production of some 50,000 units — less than one tenth the number of WWII models built. Unlike during WWII, Ford was no longer involved in the production.

<span class="mw-page-title-main">Hotchkiss M201</span> Motor vehicle

The Hotchkiss M201 was the standard light utility vehicle used by the French army from shortly after the second World War until it began retiring them from French service in the 1980s. It started in 1955 as a World War II jeep built under license and in many respects was little changed when production ended in 1966. The last M201 was taken out of French service as late as year 2000. In France it is usually simply called "La Jeep".

<span class="mw-page-title-main">Ford Pygmy</span> US 1/4-ton prototype military vehicle

The Ford Pygmy is one of two pilot vehicles submitted by Ford in response to the U.S. Army's requirement for a "light reconnaissance and command car" during the military build-up prior to World War II, which later became better known as the World War II jeep.

<span class="mw-page-title-main">2½-ton 6×6 truck</span> Class of military medium duty trucks

The 2+1⁄2-ton, 6×6 truck was a standard class of medium duty trucks, designed at the beginning of World War II for the US Armed Forces, in service for over half a century, from 1940 into the 1990s. Also frequently known as the deuce and a half, or just deuce, this nickname was popularized post WWII, most likely in the Vietnam War era. The basic cargo versions were designed to transport a cargo load of nominally 2+1⁄2 short tons over all terrain, in all weather. The 2+1⁄2-ton trucks were used ubiquitously in World War II, and continued to be the U.S. standard medium duty truck class after the war, including wide usage in the Korean and Vietnam Wars, as well as the first Gulf War.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Ware (2010 , pp. 14–21)
  2. 1 2 3 4 5 6 Crismon (1983 , pp. 211–214)
  3. 1 2 Ware (2010 , pp. 43–44)
  4. 1 2 3 Kashcheyev, L. (2000). Dżipy SSzA: Willys MBДжипы США: Willys MB[U.S. Jeeps: Willys MB] (in Russian). pp. 4–5.
  5. ↑ Ivashkyievich, Vladimir (2001). ""Bantik" s kotorym zawiazali" Бантик, с которым завязали[The Bow They Broke Ties With]. Poligon (in Russian). 8: 38–41.
  6. 1 2 "Willys MB/Ford GPW". Awtolegiendy SSSR I Socstran (in Russian) (186). Moscow: DeAgostini: 10. 2016. ISSN   2071-095X.
  7. ↑ Szczerbicki, Tomasz (2008). Samochody osobowe i osobowo-terenowe Wojska Polskiego 1918-1950[Passenger and Off-Road Vehicles of the Polish Army 1918–1950] (in Polish). Warsaw: Alma-Press. p. 143.
  8. ↑ Tarczyński, Jan; Szczerbicki, Tomasz (2012). Samochody terenowe na ziemiach polskich[Off-Road Vehicles in the Polish Lands] (in Polish). Warsaw: Wydawnictwo ZP. pp. 140, 156. ISBN   978-83-63829-29-2.
  9. 1 2 3 4 Ware (2010 , pp. 22–27)
  10. ↑ Zaloga, Steven (2005). Jeeps 1941-45. Osprey Publishing. p. 12. ISBN   1-84176-888-X.
  11. 1 2 3 Ware (2010 , p. 39)
  12. 1 2 3 Prochko, Yevgienyi (1998). Вездеходы РККА. Wiezdiechody RKKA[All-Terrain Vehicles of the Red Army] (in Russian). pp. 4–5, 13. ISBN   5-85729-015-5.
  13. 1 2 3 Crismon (1983 , p. 446)

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.