Assault tank T14 | |
---|---|
Type | Heavy tank |
Place of origin | United States |
Production history | |
Manufacturer | American Locomotive Company |
No. built | 2 [1] |
Specifications | |
Mass | 42.6 tons |
Length | 6.19 m (20 ft 4 in) |
Width | 3.17 m (10 ft 5 in) |
Height | 2.99 m (9 ft 10 in) |
Crew | 5 (Commander, gunner, loader, driver, co-driver) |
Armor | 133 mm (5.2 in) |
Main armament | 75 mm M3 Gun 50 rounds |
Secondary armament | .50 inch (12.7 mm) M2 Browning machine gun 2x .30 (7.62 mm) M1919 Browning machine gun 9,000 rounds |
Engine | Ford GAA V8 520 hp (390 kW) |
Power/weight | 12.86 hp/ton |
Suspension | Vertical volute spring suspension (VVSS) |
Operational range | 100 mi (161 km) radius of action [2] |
Maximum speed | 28 km/h (17 mph) |
The assault tank T14 was a joint project between the United States and the United Kingdom with the goal being to produce a universal infantry tank.
The T14 project never came to fruition, as a pilot model was not delivered to the UK until 1944 by which time the British Churchill tank had been in service for two years and greatly improved over its initial model. US efforts working on a similarly well-armored tank but with a higher speed for use other than in infantry support led to the T20 Medium Tank.
In 1941, the head of the United States Ordnance Department travelled to Britain to learn of their experience, ideas and requirements for the future. Among the discussion was the possibility of designing a well-armed and armored combat vehicle, one that was stronger than the British Churchill infantry tank then in production.
The tank design would have a British QF 6-pounder (57 mm) or a US 75 mm gun and share many parts with the M4 Sherman; they had the same armor thickness, but with sloped armor at extreme angles, effective armor on the T14 was slightly increased to 101 mm (4.0 in). [3]
The British initially ordered 8,500 in 1942 following which detail design work started. Testing of the pilot model which was completed in 1944 showed the vehicle to be much too heavy for practical use. By this time, the British Army was satisfied with the Churchill and its cruiser tank designs and further production of the T14 was halted.
Only two were built; one tested in the US and the other sent to Britain. [4] The example sent to Britain survives in The Tank Museum, Bovington. [4] The British had developed the Heavy Assault Tank A33 "Excelsior" design to the same specification as the T14 but this did not go into service either. [5]
The M4 Sherman, officially medium tank, M4, was the medium tank most widely used by the United States and Western Allies in World War II. The M4 Sherman proved to be reliable, relatively cheap to produce, and available in great numbers. It was also the basis of several other armored fighting vehicles including self-propelled artillery, tank destroyers, and armored recovery vehicles. Tens of thousands were distributed through the Lend-Lease program to the British Commonwealth, Soviet Union, and other Allied Nations. The tank was named by the British after the American Civil War General William Tecumseh Sherman.
The M3 Lee, officially Medium Tank, M3, was an American medium tank used during World War II. The turret was produced in two different forms, one for US needs and one modified to British requirements to place the radio next to the commander. In British Commonwealth service, the tank was called by two names: tanks employing US-pattern turrets were called "Lee", named after Confederate general Robert E. Lee, while those with British-pattern turrets were known as "Grant", named after Union general Ulysses S. Grant.
The Tank, Infantry, Mk IV (A22) Churchill was a British infantry tank used in the Second World War, best known for its heavy armour, large longitudinal chassis with all-around tracks with multiple bogies, its ability to climb steep slopes, and its use as the basis of many specialist vehicles. It was one of the heaviest Allied tanks of the war.
The Tank, Cruiser, Mk II (A10), was a cruiser tank developed alongside the A9 cruiser tank, and was intended to be a heavier, infantry tank version of that type. In practice, it was not deemed suitable for the infantry tank role and was classified as a "heavy cruiser". It served briefly in World War II.
The cruiser tank was a British tank concept of the interwar period for tanks designed as modernised armoured and mechanised cavalry, as distinguished from infantry tanks. Cruiser tanks were developed after medium tank designs of the 1930s failed to satisfy the Royal Armoured Corps. The cruiser tank concept was conceived by Giffard Le Quesne Martel, who preferred many small light tanks to swarm an opponent, instead of a few expensive and unsatisfactory medium tanks. "Light" cruiser tanks carried less armour and were correspondingly faster, whilst "heavy" cruiser tanks had more armour and were slightly slower.
A heavy tank is a tank classification produced from World War I to the end of the Cold War. These tanks generally sacrificed mobility and maneuverability for better armour protection and equal or greater firepower than tanks of lighter classes.
The Tortoise heavy assault tank (A39) was a British heavy assault gun tank design developed during the Second World War, but never put into mass production. It was developed for the task of clearing heavily fortified areas such as the Siegfried Line and as a result favoured armour protection over mobility.
The Medium Mark A Whippet was a medium tank employed by the British in World War I. Intended for fast mobile assaults, it was intended to complement the slower British heavy tanks by using its relative mobility and speed in exploiting any break in the enemy lines.
The Tank, Cruiser, Ram was a cruiser tank designed and built by Canada in the Second World War, based on the U.S. M3 Medium tank chassis. Due to standardization on the American Sherman tank for frontline units, it was used exclusively for training purposes and was never used in combat as a gun tank. The chassis was used for several other combat roles however, such as a flamethrower tank, observation post and armoured personnel carrier.
The Tank, Heavy Assault, A33 (Excelsior) was a British experimental heavy tank based on the Cromwell (A27) design developed in the Second World War. It was developed when there were concerns as to performance of the Churchill tank.
A Kangaroo was a Canadian armoured personnel carrier (APC) during the Second World War which was created by converting a tank chassis. Kangaroos were created as an expedient measure "in the field" by the Canadian Army, and were so successful that they were used by other Commonwealth forces, including the British Army.
The M4 Sherman tank was produced in several variants, a result of mass production spread across several manufacturers and several years. It was also the basis for a number of related vehicles and Shermans have been modified by several nations, ranging from upgrades to complete hull conversions for another task. Originally designed in 1941, M4 variants were still used by Israel during the 1967 and 1973 wars with its Arab neighbors.
The Heavy Tank M6 was an American heavy tank designed during World War II. The tank was produced in small numbers and never saw combat.
The M2 medium tank, officially Medium Tank, M2, was a United States Army medium tank that was first produced in 1939 by the Rock Island Arsenal, just prior to the commencement of the Second World War in Europe. Production was 18 M2 tanks, and 94 slightly improved M2A1 tanks, for a total of 112. Events in Western Europe rapidly demonstrated that the M2 was obsolete, and it was never used overseas in combat; it was, however, used for training purposes throughout the war.
This article lists British armoured fighting vehicle production during the Second World War. The United Kingdom produced 27,528 tanks and self-propelled guns from July 1939 to May 1945, as well as 26,191 armoured cars and 69,071 armoured personnel carriers.
The medium tank T20, medium tank T22 and medium tank T23 were prototype medium tanks, developed by the United States Army during World War II. They were designed as successors to the M4 Sherman. The standard main weapon for production versions of these designs was to be the 76 mm gun M1.
The Churchill Crocodile was a British flame-throwing tank of late Second World War. It was a variant of the Tank, Infantry, Mk IV (A22) Churchill Mark VII, although the Churchill Mark IV was initially chosen to be the base vehicle.
The M1 combat car, officially Light Tank, M1, was a light tank used by the United States Cavalry in the late 1930s and developed at the same time as the U.S. Army Infantry Branch's very similar Light Tank, M2.
The United States has produced tanks since their inception in World War I, up until the present day. While there were several American experiments in tank design, the first American tanks to see service were copies of French light tanks and a joint heavy tank design with the United Kingdom.
The T30 howitzer motor carriage (HMC) was a United States Army self-propelled gun used in World War II. Its design was based on requirements for an assault gun issued by the Armored Force in 1941 and it was built as an interim solution until a fully tracked design was complete.