Tank, Heavy Assault, A33 (Excelsior) | |
---|---|
Type | Assault tank/infantry tank |
Place of origin | United Kingdom |
Production history | |
Manufacturer | English Electric |
No. built | 2 |
Specifications (Second pilot) | |
Mass | 40 tons |
Length | 22 ft 8 in (6.91 m) |
Width | 11 ft 2 in (3.40 m) |
Height | 7 ft 11 in (2.41 m) |
Crew | 5 (Commander, gunner, loader, driver, co-driver) |
Armour | 20 to 114 mm (0.79 to 4.49 in) |
Main armament | Ordnance QF 75 mm 64 rounds |
Secondary armament | 2 x 7.92 mm Besa machine gun |
Engine | Rolls-Royce Meteor V12 petrol 620 bhp (460 kW) |
Suspension | Improved Christie |
Operational range | 99 mi (160 km) |
Maximum speed | 24 mph (39 km/h) off-road: 12 mph (19 km/h) |
The Tank, Heavy Assault, A33 (Excelsior) was a British experimental heavy tank based on the Cromwell (A27) design developed in the Second World War. It was developed when there were concerns as to performance of the Churchill tank.
After the Dieppe Raid in August 1942, there was concern that the Churchill infantry tank was slow and too unreliable and it was suggested that production of the Churchill stop in 1943 in order to manufacture more of the A27 (Cromwell) design, which was performing well in trials. While two lines of tanks were still policy, there was interest in a "universal tank chassis" from which infantry tanks, cruiser tanks, and other vehicles could be built. Until then an interim design based on the A27 to replace the Churchill as an infantry tank was considered. [1]
Rolls-Royce proposed an up-armoured A27M (Cromwell): A31 was a Cromwell with more armour and A32 was a more thorough redesign of the A27 with stronger suspension and armour equivalent to the Churchill. English Electric, contracted to build Cromwells, proposed using the A27 hull and turret with extra armour [note 1] and the track and suspension of the 50-ton US M6 Heavy Tank which had been developed for both US and British use. [1] This scheme received the General Staff number A33.
English Electric built two prototypes on a Cromwell tank hull, the first with the suspension and T1 track of the M6 tank in 1943 but with a 6-pounder gun. The second was built with a widened Cromwell track and suspension by LMS and different armoured skirts. The design included extra armour and an Ordnance QF 75 mm gun. When the problems of the early Churchill models were worked out, the A33 was no longer required and the project was dropped. [2]
The second pilot vehicle is in the collection of The Tank Museum in Bovington, UK.
The Infantry Tank Mark II, best known as the Matilda, is a British infantry tank of the Second World War.
The Tank, Infantry, Mk IV (A22) Churchill was a British infantry tank used in the Second World War, best known for its heavy armour, large longitudinal chassis with all-around tracks with multiple bogies, its ability to climb steep slopes, and its use as the basis of many specialist vehicles. It was one of the heaviest Allied tanks of the war.
The Cromwell tank, officially Tank, Cruiser, Mk VIII, Cromwell (A27M), was one of the series of cruiser tanks fielded by Britain in the Second World War. Named after the English Civil War-era military leader Oliver Cromwell, the Cromwell was the first tank put into service by the British to combine high speed from a powerful, reliable engine and reasonable armour. The intended dual-purpose high velocity gun could not be fitted in the turret, so a medium velocity dual purpose gun was fitted instead. Further development of the Cromwell combined with a high velocity gun led to the Comet tank.
Crusader, in full "Tank, Cruiser Mk VI, Crusader", also known by its General Staff number A.15, was one of the primary British cruiser tanks during the early part of the Second World War. Over 5,000 tanks were manufactured and they made important contributions to the British victories during the North African campaign. The Crusader tank would not see active service beyond Africa but the chassis of the tank was modified to create anti-aircraft, fire support, observation, communication, bulldozer and recovery vehicle variants.
The Tank, Cruiser, Mk II (A10), was a cruiser tank developed alongside the A9 cruiser tank, and was intended to be a heavier, infantry tank version of that type. In practice, it was not deemed suitable for the infantry tank role and was classified as a "heavy cruiser". It served briefly in World War II.
The Comet tank or Tank, Cruiser, Comet I (A34) was a British cruiser tank that first saw use near the end of the Second World War, during the Western Allied invasion of Germany. The Comet was developed from the earlier Cromwell tank and mounted the new 17 pdr High Velocity (HV) gun, in a lower profile, partly-cast turret. This gun was effective against late-war German tanks, including the Panther at medium range, and the Tiger.
The Tank, Cruiser, Challenger (A30) was a British tank of World War II. It mounted the QF 17-pounder anti-tank gun on a chassis derived from the Cromwell tank to add anti-tank firepower to the cruiser tank units. The design compromises made in fitting the large gun onto the Cromwell chassis resulted in a tank with a powerful weapon and reduced armour. However, the extemporised 17-pounder Sherman Firefly conversion of the US-supplied Sherman proved easier to produce and, with delays in production, only 200 Challengers were built. The Challenger was able to keep up with the fast Cromwell tank and was used with them.
The cruiser tank was a British tank concept of the interwar period for tanks designed as modernised armoured and mechanised cavalry, as distinguished from infantry tanks. Cruiser tanks were developed after medium tank designs of the 1930s failed to satisfy the Royal Armoured Corps. The cruiser tank concept was conceived by Giffard Le Quesne Martel, who preferred many small light tanks to swarm an opponent, instead of a few expensive and unsatisfactory medium tanks. "Light" cruiser tanks carried less armour and were correspondingly faster, whilst "heavy" cruiser tanks had more armour and were slightly slower.
The infantry tank was a tank concept developed by the United Kingdom and France in the years leading up to World War II. Infantry tanks were designed to support infantrymen in an attack. To achieve this, the vehicles were generally heavily armoured to allow them to operate in close concert with infantry even under heavy fire. The extra armour came at the expense of speed, which was not an issue when supporting relatively slow-moving foot soldiers.
The Tortoise heavy assault tank (A39) was a British heavy assault gun design developed during the Second World War, but never put into mass production. It was developed for the task of clearing heavily fortified areas such as the Siegfried Line and as a result favoured armour protection over mobility.
Tank, Infantry, Black Prince (A43) is the name that was assigned to an experimental development of the Churchill tank with a larger, wider hull and a QF 17-pounder gun. It was named after Edward, the Black Prince, son of Edward III and heir to the English throne.
The Cruiser tank Mk V or A13 Mk III Covenanter was a British cruiser tank of the Second World War. The Covenanter was the first cruiser tank design to be given a name. Designed by the London, Midland and Scottish Railway as a better-armoured replacement for the Cruiser Mark IV, it was ordered into production in 1939 before pilot models were built. Problems with the design became apparent only after production was under way.
The Tank, Infantry, Valiant (A38) was a British tank design of the Second World War that only reached the prototype stage. It was intended to meet a specification for a well-armoured, light-medium tank, for use against Japanese forces in the South-East Asia theatre. The prototype demonstrated that the design was a failure and this sole example produced was retained by the School of Tank Technology as a lesson to its students.
The Tank, Cruiser, Mk VII Cavalier (A24) was an interim design of British cruiser tank during the Second World War.
The Heavy Tank M6 was an American heavy tank designed during World War II. The tank was produced in small numbers and never saw combat.
The Assault Tank T14 was a joint project between the United States and the United Kingdom with the goal being to produce a universal infantry tank.
This article lists British armoured fighting vehicle production during the Second World War. The United Kingdom produced 27,528 tanks and self-propelled guns from July 1939 to May 1945, as well as 26,191 armoured cars and 69,071 armoured personnel carriers.
This article on military tanks deals with the history and development of tanks of the British Army from their first use in the First World War, the interwar period, during the Second World War, the Cold War and modern era.
David John Fletcher is an English author and military historian specialising in the history of armoured warfare, particularly that of the United Kingdom.