Bob Semple tank | |
---|---|
Type | Light tank |
Place of origin | New Zealand |
Production history | |
Designer | Bob Semple |
Manufacturer | Ministry of Works, Temuka |
Specifications | |
Mass | 25.4 t (25.0 long tons) |
Length | 4.20 m (13 ft 9 in) |
Width | 3.30 m (10 ft 10 in) |
Height | 3.65 m (12 ft 0 in) |
Crew | 6-8 on |
Armor | 8–12 mm (0.31–0.47 in) [1] |
Main armament | 6× 0.303 in (7.7 mm) Bren light machine guns |
Engine | 6-cylinder diesel 95 kW (127 hp) |
Power/weight | 5 hp/t |
Operational range | 160 km (99 mi) |
Maximum speed | 24 km/h (15 mph) |
The Bob Semple tank (sometimes referred to as Big Bob) was a light tank designed by Bob Semple, the New Zealand Minister of Works during World War II. Originating out of the need to build military hardware from available materials, the tank was built from corrugated iron on a tractor base. Designed and built during a period of uncertainty in which New Zealand feared having to defend itself from Japanese invasion without external assistance, these tanks were a civilian effort to design and create a means to protect New Zealand.
Designed and built without formal plans or blueprints, it had numerous design flaws and practical difficulties, and was never put into mass production or used in combat. [2]
At the onset of the Second World War, New Zealand—like its neighbour Australia—had no indigenous armoured fighting vehicle industry, and it was expected that armoured fighting vehicles would be imported from Britain. Although Australia [3] and New Zealand had some heavy industry that could be turned to the production of armour and armoured vehicles, little such preparation had been done. The idea of mechanising the New Zealand Army had been suggested before the war but without much progress. The use of the American Disston "Six Ton Tractor Tank", a 1937 vehicle constructed of an armoured box on a Caterpillar Model 35 chassis [4] which had been sold to Afghanistan, was suggested. [5]
New Zealand had built some improvised armoured trucks, and unable to get any tracked carriers from Australia, were building their own with armour plate imported from Australia. After the Fall of France in mid-1940, and the loss of most British tanks there, there was no likelihood of production being spared for New Zealand. Rather than obtain the armoured superstructures from America, they decided to produce their own using local materials and resources.
It was decided that a 'tractor-tank' would be an adequate design; if the need for defence arose, a large tank superstructure could be bolted upon a tractor base within a few hours, allowing for quick transformation and deployment of the tanks.
The first (mild steel) prototype was built on a Caterpillar D8 crawler tractor, a type which was readily available. [5] The Public Works Department had 81 D8s, and another 19 were available. [2] A lack of weapons meant that it was equipped with six Bren light machine guns — one in each side, two facing the front, one in the turret and one at the rear. The vehicle was very tall at 12 ft (3.5 m) and performance was poor. Due to the lack of armour plate, corrugated (manganese) plating was used in the expectation it would deflect bullets. The crew of eight included one gunner who had to lie on a mattress on top of the engine to fire his Bren gun. [6]
The tanks were constructed without the use of any formal plans or blueprints. Working from an American postcard depicting the conversion of a tractor to a 'tractor-tank', Bob Semple and TG Beck (Christchurch District Works Engineer), improvised the design of the tanks. Using resources available to Bob Semple as Minister of Public Works, work on the first tank commenced at the PWD's Temuka workshops in June 1940. The additional two were built at the NZR Addington Workshops. [7] The first cost £5,902, and the second and third together cost £4,323, for a total cost of £10,225 (although the Army was only billed £3,414). [8]
The intention was to disperse the hulls at locations ready in case of a Japanese invasion at which point they would be mounted on tractors for use. The idea was discarded after the tanks attracted public ridicule; however, Bob Semple stood by his design and even stated "I don’t see anyone else coming up with any better ideas." [6] [ failed verification ]
Due to the limitations of requirements and resources, the tank was a functional failure. By using a large tractor as a base, and bolting on a hastily designed and poorly constructed tank superstructure, the resultant tanks were inadequately armored, extremely heavy (20–25 ton), unstable, restricted by tractor gearing to slow speeds, and had to stop to change gears. Furthermore, due to the shape of the underlying tractor and undue vibrations, shooting from the tank was both difficult and inevitably inaccurate. [8] These limitations have caused the Bob Semple Tank to frequently make lists of "Worst ever tanks". [9]
In the end, due to their impracticality, the tanks were disposed of by the Army. They had been given Army serial numbers NZ6292 (held at Papakura) and NZ3494 & NZ3495 (held at Burnham). Only one went to the Pacific in 1944, after having its armour stripped. It is possible that the Bob Semple tank could have been potentially useful in battle, as it was planned to have a 37 mm anti-tank gun rather than the Bren gun in the turret; the armour was also bullet-resistant to some degree, so it might have been at least somewhat effective in the event of an invasion. [8]
An armoured fighting vehicle or armored fighting vehicle (AFV) is an armed combat vehicle protected by armour, generally combining operational mobility with offensive and defensive capabilities. AFVs can be wheeled or tracked. Examples of AFVs are tanks, armoured cars, assault guns, self-propelled artilleries, infantry fighting vehicles (IFV), and armoured personnel carriers (APC).
The Tank, Infantry, Mk III, Valentine was an infantry tank produced in the United Kingdom during World War II. More than 8,000 Valentines were produced in eleven marks, plus specialised variants, accounting for about a quarter of wartime British tank production. The variants included riveted and welded construction, petrol and diesel engines and increases in armament. It was supplied in large numbers to the USSR and built under licence in Canada. It was used by the British in the North African campaign. Developed by Vickers, it proved to be strong and reliable.
The AC1 Sentinel was a cruiser tank designed in Australia in World War II in response to the war in Europe, and to the threat of Japan expanding the war to the Pacific or even a feared Japanese invasion of Australia. It was the first tank to be built with a hull cast as a single piece, and the only tank to be produced in quantity in Australia. The few Sentinels that were built never saw action as Australia's armoured divisions had been equipped by that time with British and American tanks.
Crusader, in full "Tank, Cruiser Mk VI, Crusader", also known by its General Staff number A.15, was one of the primary British cruiser tanks during the early part of the Second World War. Over 5,000 tanks were manufactured and they made important contributions to the British victories during the North African campaign. The Crusader only saw active service in Africa but the chassis of the tank was modified to create anti-aircraft, fire support, observation, communication, bulldozer and recovery vehicle variants.
The Cruiser tank Mk V or A13 Mk III Covenanter was a British cruiser tank of the Second World War. The Covenanter was the first cruiser tank design to be given a name. Designed by the London, Midland and Scottish Railway as a better-armoured replacement for the Cruiser Mark IV, it was ordered into production in 1939 before pilot models were built. Problems with the design became apparent only after production was under way.
The Universal carrier, also known as the Bren gun carrier and sometimes simply the Bren carrier from the light machine gun armament, is a family of light armoured tracked vehicles built by Vickers-Armstrongs and other companies.
The Mark IX tank was a British armoured fighting vehicle from the First World War. It was the world's first specialised armoured personnel carrier (APC).
The Humber armoured car was one of the most widely produced British armoured cars of the Second World War. It supplemented the Humber Light Reconnaissance Car and remained in service until the end of the war.
The Tank, Cruiser, Ram was a cruiser tank designed and built by Canada in the Second World War, based on the U.S. M3 Medium tank chassis. Due to standardization on the American Sherman tank for frontline units, it was used exclusively for training purposes and was never used in combat as a gun tank. The chassis was used for several other combat roles however, such as a flamethrower tank, observation post and armoured personnel carrier.
The Marmon–Herrington armoured car was a series of armoured vehicles that were produced in South Africa and adopted by the British Army during World War II. They were also issued to RAF armoured car companies, which seem never to have used them in action, making greater use of Rolls-Royce Armoured Cars and other types.
The KhTZ-16 was a Soviet improvised fighting vehicle of the Second World War, built on the chassis of an STZ-3 tractor. The vehicles were built in Kharkiv until the factory was evacuated to the east, at which time production moved to Stalingrad. No less than 809 vehicles were planned, but no more than about 60-90 were actually built. Some vehicles were used in the fighting around Kharkiv in October 1941, but were quickly lost in battle against Axis forces.
The NI tank also known as the Odessa tank, was a Soviet improvised fighting vehicle, based on an STZ-5 agricultural tractor, manufactured in Odessa during the Siege of Odessa in World War II.
The Schofield tank, named after its designer, was a New Zealand tank design of the Second World War. Developed in 1940 when it seemed that the Pacific War might reach New Zealand and with little likelihood of weapons coming from Britain, it did not enter service. It was designed to run on either tracks or wheels.
An artillery tractor, also referred to as a gun tractor, is a specialized heavy-duty form of tractor unit used to tow artillery pieces of varying weights and calibres. It may be wheeled, tracked, or half-tracked.
Standard Car 4x2, or Car Armoured Light Standard, better known as the Beaverette, was a British improvised armoured car produced during the Second World War.
This article lists British armoured fighting vehicle production during the Second World War. The United Kingdom produced 27,528 tanks and self-propelled guns from July 1939 to May 1945, as well as 26,191 armoured cars and 69,071 armoured personnel carriers.
The British Army made extensive use of a variety of combat vehicles during the Second World War. This article is a summary of those vehicles.
The Grizzly I was a Canadian-built M4A1 Sherman tank with relatively minor modifications, primarily to stowage and pioneer tool location and adding accommodations for a Number 19 radio set. They used the same General Steel hull castings as late Pressed Steel-built M4A1(75)s, to include both the standard hull and the later ones with the armour thickened over the ammo bins. Grizzlies were originally built with US style tracks and sprockets. It was only later that they were refitted with Canadian Dry Pin (CDP) tracks, which did not require rubber.
The New Zealand Army use of tanks from after the First World War, through the interwar period, the Second World War, the Cold War and to the present day has been limited, but there is some history. The New Zealand armed forces developed in the early twentieth century but served alongside the British and other Empire and Commonwealth nations in World War I and World War II.
The Disston Tractor Tank, also called the Six-Ton Tractor Tank, was an American light tank of the mid 1930s. It was cheap to make, but few were sold as it was primitive and markedly inferior to the other light tanks of the era.