Caproni Ca.7 | |
---|---|
![]() | |
Side view of Caproni Ca.7 | |
Role | Pioneering aircraft |
Manufacturer | Caproni |
First flight | Never flew |
Status | Paper project only |
Number built | 0 |
The Caproni Ca.7 was a proposed biplane designed by Caproni in the early 1910s.
The Ca.7 was an all-wood biplane equipped with a double horizontal fletching system, mounted respectively at the front and rear ends of the fuselage . The project involved the installation of two "tandem" engines inside the fuselage, which would have to accommodate, in addition to the pilot (housed at the front end, just behind the bow landing), two passengers (seated behind the engines). [1]
The aircraft had two pushing propellers, driven by chain drive devices from the engines housed in the fuselage; the two engines were connected by friction clutches, so that they could work together or separately. Precisely because of the design difficulties involved in the use of two engines, both housed in the fuselage, one at a time should have been turned off, even in flight, for cooling needs, but prevented the construction of the airplane, which therefore he remained at the project stage. [2]
Although, the Ca.7 never left the drawing board, its design contributed to the development of the multiengine Caproni bombers of World War I.
Data from Aeroplani Caproni – Gianni Caproni ideatore e costruttore di ali italiane [1]
General characteristics
Performance
The Caproni Ca.60 Transaereo, often referred to as the Noviplano (nine-wing) or Capronissimo, was the prototype of a large nine-wing flying boat intended to become a 100-passenger transatlantic airliner. It featured eight engines and three sets of triple wings.
The Caproni Ca.1 was an experimental biplane built in Italy in 1910. It was the first aircraft to be designed and built by aviation pioneer Gianni Caproni, although he had previously collaborated with Henri Coandă on sailplane designs.
The Caproni Ca.125 was a single-engine, tandem two-seat, touring biplane built in Italy in 1933. It could be operated either as a landplane or seaplane.
The Caproni Ca.16 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.10 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.9 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.6 was a single-engine biplane designed and built by Caproni in the early 1910s.
The Caproni Ca.8 was a single-seat monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.22 was a single-engine monoplane made by the Italian company Aeronautica Caproni in 1913.
The Caproni Ca.25 was a single-engine monoplane made by the Italian company Aeronautica Caproni in 1914.
The Caproni Ca.11 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.12 was a two-seater single-engine monoplane built by Caproni in the early 1910s.
The Caproni Ca.13 was a two-seater single-engine monoplane built by Caproni in the early 1910s.
The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.
The Caproni Ca.103 was a biplane twin-engine bomber developed by the Italian company Aeronautica Caproni in the late 1920s.
The Caproni Ca.120 was a three-engine monoplane bomber built by Caproni in the 1930s.
The Caproni Ca.127 was a single-engine reconnaissance monoplane built by Caproni in the mid-1930s.
The Caproni Ca.142 was a three-engined multirole aircraft built by Caproni in the mid-1930s.
The Caproni Ca.53 was an Italian prototype light bomber built in the last months of World War I.
The Caproni Ca.14 was an early biplane developed by Giovanni Battista Caproni in the early 1910s.