 | This article needs additional citations for verification .(June 2009) |
| Ca.1 (1914) | |
|---|---|
 | |
| Role | Heavy day bomber |
| National origin | Italy |
| Manufacturer | Caproni |
| First flight | Late 1914 [1] |
| Number built | 162 |
The Caproni Ca.1 was an Italian heavy bomber of the World War I era.
The Ca.1 was a three-engine biplane of fabric-covered wooden construction. It had four crew members in an open central nacelle: two pilots, a front gunner, and rear gunner-mechanic, who manned upper machine guns, standing upon the central engine in a protective cage, just in front of the rear propeller. The Ca.1 had a tricycle landing gear.
Italy and Russia were the first countries to start developing a heavy bomber capability before World War I. The first heavy bomber, designed by Gianni Caproni was a twin-boom biplane, featuring a layout that included three 67 kW (80 hp) Gnome rotary engines housed one behind the other in a central nacelle, the rearmost driving a pusher propeller, and the other two driving tractor propellers mounted on the fronts of the two booms. Referred to by Caproni as the Caproni 260 hp and retrospectively, after the war, as the Ca.30), this design flew in a slightly modified form (later called the Ca.31) in October 1914.
Test flights revealed the power to be insufficient and the engine layout unworkable. Caproni altered the aircraft, retaining the pusher engine in its original location and moving the other two engines to the front of the booms, directly driving the propellers. With more powerful inline engines, the air arm of the Italian Army became interested in purchasing the Caproni 300 hp (later known as the Ca.32), which they designated the Ca.1. A total of 166 aircraft were delivered between August 1915 and December 1916.
Some Ca.1s survived the war to be rebuilt as airliners, able to carry up to six passengers. This conversion became known as the Ca.56 in Caproni's postwar naming scheme.
There is some variation in published sources over early Caproni designations. The confusion stems, in part, from three separate schemes used to designate these aircraft – Caproni's in-house designations of the time, those used by the Italian Army, and designations created after the war by Caproni to refer to past designs.
The Ca.1 entered service with the Italian Army in the middle of 1915 and first saw action on August 20, 1915, attacking the Austrian air base at Aisovizza. Fifteen bomber squadrons (1-15 Squadriglia) were eventually equipped with Ca.1, Ca.2, and Ca.3 bombers, bombing mostly targets in Austria-Hungary. The 12th squadron operated in Libya. In 1918 three squadrons (3, 14 and 15) operated in France.
Kingdom of Italy Data from [1]
General characteristics
Performance
Armament
Related lists
The Caproni Ca.3 is an Italian heavy bomber of World War I and the postwar era. It was the most produced version of the series of aircraft that began with the 1914 Caproni Ca.1 and continued until the more powerful 1917 Caproni Ca.5 variant.
The Douglas Y1B-7 was a 1930s American bomber aircraft. It was the first US monoplane given the B- 'bomber' designation. The monoplane was more practical and less expensive than the biplane, and the United States Army Air Corps chose to experiment with monoplanes for this reason. At the time the XB-7 was ordered, it was being tested by Douglas Aircraft as an observational plane.
The Caproni Ca.4 was an Italian heavy bomber of the World War I era.
The Caproni Ca.2 was an Italian heavy bomber of the World War I era.
The Caproni Ca.5 was an Italian heavy bomber of World War I and the postwar era. It was the final version of the series of aircraft that began with the Caproni Ca.1 in 1914.
The Caproni Ca.37 was a ground attack aircraft designed and built in Italy by Caproni around 1916
Between 1911 and 1914, the Royal Aircraft Factory used the F.E.2 designation for three quite different aircraft that shared only a common "Farman" pusher biplane layout.
The Vickers F.B.5 was a British two-seat pusher military biplane of the First World War. Armed with a single .303 in (7.7 mm) Lewis gun operated by the observer in the front of the nacelle, it was the first aircraft purpose-built for air-to-air combat to see service, making it the world's first operational fighter aircraft.
The Zeppelin-Staaken R.VI was a four-engined German biplane strategic bomber of World War I, and the only Riesenflugzeug design built in any quantity.
The Maurice Farman MF.11 Shorthorn is a French aircraft developed before World War I by the Farman Aviation Works. It was used as a reconnaissance and light bomber during the early part of World War I, later being relegated to training duties.
The Friedrichshafen G.I was a prototype heavy bomber aircraft that was built in Germany by Flugzeugbau Friedrichshafen in 1915. It was Karl Gehlen's first design for the company, and although it was not produced in quantity, it provided the foundation for the later, highly successful bombers culminating in the G.III.
The Gotha G.II series was a heavy bomber used by the Luftstreitkräfte during World War I.
The Grahame-White Ganymede was a prototype British heavy night bomber intended to serve with the Royal Air Force in the First World War. A large, three-engined, twin-boom biplane, the sole prototype Ganymede did not fly until after the war had ended, and although an attempt was made to convert the aircraft to an airliner, it was unsuccessful.
The Zeppelin-Staaken Riesenflugzeuge were a series of very large bomber aircraft - Riesenflugzeuge, usually powered by four or more engines, designed and built in Germany from 1915 to 1919.
The LFG Roland G.I was a large prototype single-engine biplane bomber built in Germany in 1915, during World War I. It had a single engine buried in the fuselage driving pusher configuration propellers mounted on outriggers.
The Siemens-Schuckert L.I was a large, three-engined biplane bomber aircraft, built in Germany towards the end of World War I. It was a twin boom design, strongly influenced by the successful Caproni Ca.3. Three were built but not used operationally.
The Lloyd 40.08 Luftkreuzer was a three engine triplane bomber type built during World War I. The design was proven to be ineffective and development did not proceed past the prototype stage.
The Caproni Ca.61 was an Italian heavy day bomber aircraft of 1922. It was the final development of the Caproni three engine, twin boom biplane types developed during World War I, but it was not put into production.
The Caproni Ca.66 was an Italian night bomber designed to reequip the post-World War I Italian Air Force. Only two examples of the four-engined biplane were built.
The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.
