| Caproni Ca.71 | |
|---|---|
 | |
| Role | Night fighter |
| National origin | Italy |
| Manufacturer | Caproni |
| First flight | 1927 |
| Number built | 1 |
| Variants | Caproni Ca.70 |
The Caproni Ca.71, originally Ca.70L, was a two-seat biplane night fighter produced in Italy in 1927. It was derived from the Caproni Ca.70 of 1925.
Undaunted by the lack of interest the Regia Aeronautica (Italian Royal Air Force) had displayed in the Caproni Ca.70 night fighter after official tests in 1926, the Caproni company designed a derivative. It was initially designated the Ca.70L and then redesignated the Ca.71. Like the Ca.70, the Ca.71 was designed to ensure good low-speed handling and good visibility from both cockpits, without any of the aircraft's structural elements obstructing the view of either crewman. Its two wings were of unequal span, and it had tailskid landing gear, an unusual feature of which was an oleo-pneumatic shock absorber on the main landing gear which allowed the wheels to travel forward in their linkage while the plane was taxiing. Armament consisted of two fixed forward-firing 7.7-millimeter Vickers machine guns and a flexible 7.7-millimeter Lewis machine gun on a Scarff ring in the rear cockpit. [1]
The Ca.71 differed from the Ca.70 in engine installation. The Ca.70's tractor-mounted Bristol Jupiter engine was replaced by a pusher configuration, and the Ca.71 was designed to operate with various engines ranging from 298 to 373 kilowatts (400 to 500 horsepower). The lone Ca.71 built had a 298-kW (400-hp) 12-cylinder Lorraine-Dietrich Vee-type engine and was slightly heavier than the Ca.70, but otherwise was identical to the Ca.70. [1]
The Ca.71 first flew in 1927. It was slightly slower and had a slightly lower rate of climb than the Ca.70, although its capacity to accommodate a more powerful engine may have allowed it to overcome this. At any rate, the Regia Aeronautica had no more interest in procuring the Ca.71 than it had in the Ca.70, and no further examples were built. [1]
Kingdom of Italy General characteristics
Performance
Armament
The Breda A.7 was a reconnaissance aircraft developed in Italy for use by the Regia Aeronautica in 1929. It was a braced parasol monoplane of conventional configuration with tailskid undercarriage. The pilot and observer sat in tandem, open cockpits. A single prototype of a long-range example, originally designated A.7 Raid and later A.16 was also constructed, but the air force showed no interest in it.
The Caproni Vizzola F.5 was an Italian fighter aircraft built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The Piaggio P.119 was an Italian experimental fighter of World War II. It had a relatively novel layout, with a "buried" radial engine mounted mid-fuselage. Only a single prototype was built before the Armistice between Italy and the allied armed forces, which ended the project.
The Caproni Ca.73 was an Italian airliner produced during the 1920s which went on to serve as a light bomber in the newly independent Regia Aeronautica. It was an inverted sesquiplane with a biplane tail and two engines mounted in a push-pull configuration within a common nacelle mounted on struts in the interplane gap above the fuselage. The two pilots sat in an open cockpit, while ten passengers could be accommodated within the fuselage.
The Caproni Ca.114 was a fighter biplane produced in Italy in the early 1930s which was flown operationally in Peru in the 1930s and 1940s.
The CANT 25 was an Italian shipboard single-seat biplane flying boat fighter that entered service with the Regia Aeronautica in 1931.
The Savoia-Marchetti S.59 was a 1920s Italian reconnaissance/bomber flying boat designed and built by Savoia-Marchetti for the Regia Aeronautica.
The SIAI S.52 was an Italian fighter prototype of 1924.
The Caproni Ca.355 Tuffo was a low-wing single-engine dive bomber, designed and built by the Italian Caproni company in 1941, which never proceeded beyond a single prototype. Derived from Ca.335 Mistral, the Ca.355 was proposed to equip the Regia Aeronautica, but it was found to offer little advantage over the German Junkers Ju 87 "Stuka" and the project was abandoned.
The Caproni Ca.70 was a two-seat night fighter and ground attack biplane produced in Italy in 1925. It was the only Italian aircraft designed from the outset as a night fighter.
The Caproni CH.1 was a single-seat biplane fighter, a single example of which was produced as a prototype in Italy in 1935.
The Caproni Vizzola F.4 was an Italian fighter aircraft prototype designed and built from 1939. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The Caproni Vizzola F.6 was a World War II-era Italian fighter aircraft built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear. Only two prototypes were built, one designated F.6M and the other designated F.6Z.
The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.
The Piaggio P.2 was an Italian fighter prototype of advanced design built by Piaggio in 1923.
The Gabardini G.8 was an Italian single-seat aircraft produced in both fighter and trainer versions by Gabardini in 1923.
The Marchetti MVT, later renamed SIAI S.50, was an Italian fighter of 1919 and the early 1920s.
The SIAI S.58 or Savoia-Marchetti S.M.58 was an Italian flying boat fighter prototype of the 1920s designed and manufactured by SIAI.
The Macchi M.26 was an Italian flying boat fighter prototype of 1924 designed and manufactured by Macchi.
The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.
 | Wikimedia Commons has media related to Caproni Ca.71 . |
