| Caproni Ca.165 | |
|---|---|
 | |
| Caproni Ca.165 in its initial form, c. 1938 | |
| Role | Fighter |
| Manufacturer | Caproni |
| Designer | Raffaele Conflenti |
| First flight | 16 February 1938 |
| Retired | 1939 |
| Primary user | Regia Aeronautica (intended) |
| Number built | 1 |
The Caproni Ca.165 was an Italian biplane fighter developed just before World War II, but produced only as a prototype, as the competing Fiat CR.42 Falco was selected for series production.
Although known for three-engine heavy bombers, Caproni had a long history with fighters, starting in 1914 with an interceptor monoplane with a single machine gun, and a monoplane. This was innovative for its time, but it had also no success, as had almost all the fighters proposed in the next decades.
Many types of machines were developed by Italian industries prior to World War II, and some were produced at least in limited numbers, but this would not be the case with the Ca.165, a biplane fighter proposed for a fighter contest. In February 1938, it flew for the first time as a prototype.
The Ca.165 had a mixed construction. The fuselage was framed in steel with a skin of light alloys, while the wing was built out of wood with fabric skin. Finally, the tail was metallic, also covered in fabric.
The Ca.165 had a narrow fuselage featuring an enclosed cockpit. The undercarriage was fixed with spatted wheels. A unique feature of the Ca.165 was the retractable radiator, which the pilot could deploy for optimum performance, or retract depending on the flight conditions: completely open in climbs, or closed in level flight and dives. In this way, it was similar to the Morane-Saulnier M.S.406. When deployed, the radiator significantly increased the drag on the aircraft, but increased engine performance and reliability.
The engine was a V-12 671 kW (900 hp) Isotta Fraschini L.121 R.C.40 driving a three-bladed Alfa Romeo electric propeller. Top speed was around 465 km/h (289 mph) at 5,350 m (17,550 ft) with a 10,000 m (32,810 ft) ceiling. The range was relatively small, around 672 km (418 mi). Dimensions were 8.1 m (26.6 ft) length, 9.3 m (30.5 ft) height, 2.8 m (9.2 ft) wingspan, 21.4 m2 (230.3 ft2) wing surface. The weight was 1,855/2,435 kg (4,090/5,368 lb), with 570 kg ( lb) of payload.
After several modifications, the Ca.165 had the tail surface augmented and the aft fuselage lowered to fit a canopy with 360° visibility.
At Guidonia, the aircraft was tested like the many other fighters present for evaluation. However, it was only tested against the Fiat CR.42 Falco, the only other biplane. In mock fights the Ca.165 outperformed the CR.42, thanks to the superior aerodynamics and available power. Despite this, the aircraft was rated inferior as the CR. 42 was more maneuverable and employed a reliable powerplant while the Caproni engine was experimental and had poor reliability. However, the Ca.165 was declared the "winner" of the mock fights, so General Valle ordered 12 examples on 2 September 1939, although the order was cancelled on 11 October 1939 and changed to 12 Caproni F.5s. This production shift was made even though it involved the payment of a penalty.
The Ca.165 was comparable in useful load (570 kg/1,257 lb vs. 575 kg/1,268 lb) and weapons (2 × 12.7 mm/0.5 in, 1 × 7.7 mm/0.303 in) to the CR.42, but it was 200 kg (441 lb) heavier with less wing surface, so it had wing loading of 113 kg/m compared to 99 for the CR.42; and that, coupled with the less effective controls, made the Ca.165 less agile. Despite these shortcomings, the Ca. 165's minimum speed was lower (114 km/h/71 mph vs 122 km/h/76 mph), allowing for shorter takeoff runs and slightly better low-speed performance.
The Ca.165 had a very slim and small fuselage, but was heavier than the CR.42, which was due, arguably, to the different engine and construction. The Caproni was not really a 'turning fighter', but given the limits of biplanes, was more of an 'energy fighter' with more pronounced capabilities in speed than turning (as was emphasized by the test pilots). An improved version was designed to address the maneuverability limitations, but the development was interrupted. It was built with non-strategic materials (steel and wood mainly), so it could have been at an advantage in the war in terms of strain on the materials industry, but given the type of engine, it is unclear if it was an economically practical aircraft.
Caproni tried other ways to improve this powerful biplane, first with the 746 kW (1,000 hp) Piaggio P.XI radial engine, then with a 746 kW (1,000 hp) Isotta Fraschini L.170 liquid-cooled powerplant, and the redesigned sesquiplane wings as the Ca.173. None of these proposals were successful, at least not enough to pique the interest of the Regia Aeronautica . In any case, both engines were far from being sufficiently reliable and were never adopted in large numbers by the Italian air force.
Perhaps the influence of Fiat contributed to the selection of the CR.42 Falco over the Ca.165, although Caproni was an influential company itself at the time. Apparently the bottom line was that the Ca.165's engine was much less reliable and only 44 kW (60 hp) more powerful, while the aircraft itself was 200 kg (440 lb) heavier.
The Ca.165, despite being considered the winner in the mock fights, lost the final evaluation. Apparently, test pilots flying the Ca.165 managed to outperform the Falco but disliked the aircraft itself. The faster speed was a more modern concept for a new generation fighter (especially in the interception of fast bombers such as the Bristol Blenheim, which often proved too fast for the Falco), and speed was an increasingly important design consideration in World War II-era aircraft. The engine's poor reliability was also apparent, and when considering which aircraft to produce, this could have been a disadvantage as well.
In any case, the Ca.165 was produced in only a single prototype and so vanished from history; instead the Fiat CR.42 became the most produced Italian fighter, despite its overall obsolescence, with almost 1,800 examples built until 1944.
Data from [1]
General characteristics
Performance
Armament
The Caproni Ca.2 was an Italian heavy bomber of the World War I era.
The Caproni Ca.5 was an Italian heavy bomber of World War I and the postwar era. It was the final version of the series of aircraft that began with the Caproni Ca.1 in 1914.
The Fiat CR.20 was an Italian biplane fighter used during the 1920s and 1930s. Designed by Celestino Rosatelli, it represented an intermediate step from the early biplane CR.1 and the later, successful series CR.30, CR.32 and CR.42.
The Fiat CR.1 was an Italian biplane fighter aircraft of the 1920s. Of wood-and-fabric construction, it was designed by Celestino Rosatelli, from whom it gained the 'CR' designation. Its most distinctive feature was that the lower wings were longer than the upper ones.
The Caproni Ca.135 was an Italian medium bomber designed in Bergamo in Italy by Cesare Pallavicino. It flew for the first time in 1935, and entered service with the Peruvian Air Force in 1937, and with the Regia Aeronautica in January 1938.
The Breda Ba.201 was an Italian dive bomber designed during World War II, that never entered production.
The Caproni Vizzola F.5 was an Italian fighter aircraft that was built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.
The Caproni Ca.73 was an Italian airliner produced during the 1920s which went on to serve as a light bomber in the newly independent Regia Aeronautica.
The Caproni Ca.355 Tuffo was a low-wing single-engine dive bomber, designed and built by the Italian Caproni company in 1941, which never proceeded beyond a single prototype. Derived from Ca.335 Mistral, the Ca.355 was proposed to equip the Regia Aeronautica, but it was found to offer little advantage over the German Junkers Ju 87 "Stuka" and the project was abandoned.
The Caproni Ca.90 was a prototype Italian heavy bomber designed and built by Caproni. When it first flew in 1929 it was the largest land-based aircraft in the world.
The Caproni Ca.350 was an Italian single-engined project for a two-seat fighter-bomber/reconnaissance aircraft of the 1930s. Designed by Cesare Pallavicino to meet a requirement of the Regia Aeronautica, it was an innovative and fast design, to have been powered by an Isotta Fraschini Zeta R.C.42, but no aircraft were built.
The Reggiane Re.2004 was an Italian single-engined monoplane made by Reggiane and designed by Roberto Longhi. The aircraft never passed the preliminary stages.
The Caproni Ca.95 was a large, three engine, long range, heavy bomber prototype built in Italy in 1929. It could carry a 1,600 kg (3,500 lb) bomb load and had three defensive gun positions. Only one was built.
The Caproni Ca.61 was an Italian heavy day bomber aircraft of 1922. It was the final development of the Caproni three engine, twin boom biplane types developed during World War I, but it was not put into production.
The Caproni Ca.134 was a biplane reconnaissance aircraft built by the Italian company Caproni in the 1930s.
The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.
The Caproni Ca.79 was an Italian light bomber produced in the mid-1920s.
The Caproni Ca.120 was a three-engine monoplane bomber built by Caproni in the 1930s.
The Caproni Ca.127 was a single-engine reconnaissance monoplane built by Caproni in the mid-1930s.
