| Caproni Ca.70 | |
|---|---|
 | |
| Role | Night fighter |
| National origin | Italy |
| Manufacturer | Caproni |
| First flight | 1925 |
| Number built | 1 |
| Variants | Caproni Ca.71 |
The Caproni Ca.70 was a two-seat night fighter and ground attack biplane produced in Italy in 1925. It was the only Italian aircraft designed from the outset as a night fighter.
The Caproni company designed the Ca.70 to ensure good low-speed handling and good visibility from both cockpits, without any of the aircraft's structural elements obstructing the view of either crewman. Its two wings were of unequal span, and it had tailskid landing gear, an unusual feature of which was an oleo-pneumatic shock absorber on the main landing gear which allowed the wheels to travel forward in their linkage while the plane was taxiing. The 9-cylinder, 313-kilowatt (420-horsepower) Bristol Jupiter radial engine gave the Ca.70 a top speed of 205 kilometers (127 mi) per hour. Armament consisted of two fixed forward-firing 7.7-millimeter Vickers machine guns and a flexible 7.7-millimeter Lewis machine gun on a Scarff ring in the rear cockpit. [1]
The Ca.70 first flew in 1925. After the Caproni company finished its tests, it turned the aircraft over to the Regia Aeronautica (Italian Royal Air Force), which tested it at Guidonia Montecelio in 1926, and the Ca.70 performed well, with good handling and performance. However, the Regia Aeronautica had little interest in procuring a two-seat night fighter, and no further examples were built. [1]
Caproni used the design of the Ca.70 for as the basis for a derivative, the Caproni Ca.71 prototype of 1927. [1]
Kingdom of Italy General characteristics
Performance
Armament
The Breda Ba.64 was an Italian single-engine ground-attack aircraft used by the Regia Aeronautica during the 1930s.
The Fiat CR.1 was an Italian biplane fighter aircraft of the 1920s. Of wood-and-fabric construction, it was designed by Celestino Rosatelli, from whom it gained the 'CR' designation. Its most distinctive feature was that the lower wings were longer than the upper ones.
The Caproni Vizzola F.5 was an Italian fighter aircraft that was built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.
The Caproni Ca.97 was a civil utility aircraft produced in Italy in the late 1920s and early 1930s. As originally designed, it was a high-wing braced trimotor monoplane of conventional configuration with one engine mounted on the nose and the other two carried on strut-mounted nacelles at the fuselage sides. Examples were also produced with only the nose engine or only the two nacelle-mounted engines.
The Caproni Ca.114 was a fighter biplane produced in Italy in the early 1930s which was flown operationally in Peru in the 1930s and 1940s.
The CANT 25 was an Italian shipboard single-seat sesquiplane flying boat fighter that entered service with the Regia Aeronautica in 1931.
The IMAM Ro.30 was a 1930s Italian observation biplane designed and built by Industrie Meccaniche e Aeronautiche Meridionali. It was only built in limited numbers before being replaced by the Ro.37.
The SIAI S.52 was an Italian fighter prototype of 1924.
The Caproni Ca.71, originally Ca.70L, was a two-seat biplane night fighter produced in Italy in 1927. It was derived from the Caproni Ca.70 of 1925.
The Caproni CH.1 was a single-seat biplane fighter, a single example of which was produced as a prototype in Italy in 1935.
The Caproni Vizzola F.4 was an Italian fighter aircraft prototype that was designed in 1937 and built from 1939. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.
The Piaggio P.2 was an Italian fighter prototype of advanced design built by Piaggio in 1923.
The Gabardini G.8 was an Italian single-seat aircraft produced in both fighter and trainer versions by Gabardini in 1923.
The Marchetti MVT, later renamed SIAI S.50, was an Italian fighter of 1919 and the early 1920s.
The SIAI S.58 or Savoia-Marchetti S.M.58 was an Italian flying boat fighter prototype of the 1920s designed and manufactured by SIAI.
The SIAI S.67 or Savoia Marchetti SM.67 was an Italian flying boat fighter of the early 1930s designed and manufactured by SIAI.
The Macchi M.26 was an Italian flying boat fighter prototype of 1924 designed and manufactured by Macchi.
The Dewoitine D.9 was a French monoplane fighter built by Dewoitine and built under licence in Italy as the Ansaldo AC.3.
