Caproni Ca.331

Last updated
Caproni Ca.331 Raffica
Caproni Ca.331.jpg
The first Caproni Vizzola Ca.331, completed as the Ca.331 O.A. (Osservazione Area) reconnaissance aircraft prototype.
RoleReconnaissance Aircraft/Bomber/Night Fighter
National originItaly
Manufacturer Caproni
Designer Ing Cesare Pallavacino
First flightCa.331 O.A.: 31 August 1940
Ca331 C.N.: Summer 1942
Primary user Regia Aeronautica (Italian Royal Air Force)
Number built3 [1]

The Caproni Ca.331 Raffica ("Gust of Wind" or "Fire Burst") was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.

Contents

Development

Ca.331 O.A. (Ca.331A)

The Caproni Ca.331 O.A. prototype. Caproni Ca.331 O.A.jpg
The Caproni Ca.331 O.A. prototype.

In response to a 1938 Italian Air Ministry requirement for a new tactical reconnaissance aircraft with combat capability, Ing Cesare Pallavacino [2] of the Caproni company's Caproni Bergamaschi subsidiary began the design of the Ca.331 O.A. (O.A. standing for Osservazione Area, Italian for "Area Observation"), also designated Ca.331A, in October 1938. It was innovative for Caproni in being of all-metal construction. The Ca.331 O.A. prototype, a twin-engine low-wing monoplane with an unstepped cockpit and glazed nose, had duralumin stressed skin on both its fuselage and wings, and its wings were of an inverted gull-wing configuration. It had two Isotta Fraschini Delta RC.40 engines rated at 574 kilowatts (770 horsepower) each. The aircraft employed a three-man crew of pilot, observer/gunner, and radioman/gunner, and was armed with four 12.7-millimeter (0.5-inch) Breda-SAFAT machine guns—two of them in fixed mounts in the wing roots firing forward, one in a dorsal turret, and one in a ventral mount. The Ca.331 O.A. also had a bomb bay capable of carrying up to 1,000 kilograms (2,205 pounds) of bombs and four external bomb racks under its wings. [3] [ verification needed ]

The Ca.331 O.A. prototype first flew on 31 August 1940, at Ponte San Pietro with Caproni test pilot Ettore Wengi at the controls. Its original Piaggio propellers proved inadequate, but their replacement with Alfa Romeo-built propellers in 1941 resulted in the aircraft having improved performance which, in fact, exceeded expectations. In 1941, Caproni Bergamaschi delivered the prototype to the Regia Aeronautica (Italian Royal Air Force), which began official tests at Guidonia Montecelio with good results. However, the Regia Aeronautica handed the aircraft back to Caproni Bergamaschi without a production order. The German Air Force ( Luftwaffe ) then requested control of the aircraft for trials at its test center at Rechlin in Germany. Although the Luftwaffe was impressed with the aircraft—probably more so than the Italians—no German order for it resulted. [3] [ verification needed ]

The Ca.331 O.A. won widespread praise from both the Italian and German pilots—including German fighter ace Werner Mölders (1913–1941) -- who tested it, and the chief of the German Luftwaffe, Hermann Göring (1893–1946), was given a demonstration of its capabilities at Guidonia Montecelio in January 1942. The reasons for the lack of a production order by either Italy or Germany remain obscure and a matter of debate. Reasons given by various sources include a supposed overreliance on the use of materials in the Ca.331's construction that may have been in scarce supply (although this itself is controversial) in wartime Italy and Germany; the use of too many parts in the Ca.331, uncommon with other Italian aircraft (although it is not clear what specifically these may have been); political problems that Caproni company founder Gianni Caproni (1886–1957) may have had with the Italian Fascist government (which have not been identified clearly); an unwillingness of the Italian military to cooperate too closely with their German counterparts for fear of being dominated by Germany in the event of a German victory in World War II; or simply that the Ca.331 was under development for so long that the requirement for it disappeared before it could enter production, a common problem in the Italian aircraft industry during the World War II years. [4] The sole Ca.331 O.A. prototype was at the Caproni company airfield at Taliedo at the time the Italian armistice with the Allies took effect on 8 September 1943. Seized by German forces, it was disassembled, shipped to Germany, and later scrapped.[ citation needed ]

Ca.331 C.N. (Ca.331B)

The second Caproni Ca.331 prototype. Ordered as a second Ca.331 O.A. reconnaissance aircraft prototype, it was completed instead as the first prototype of the Ca.331 C.N. night fighter as seen here, probably during weapons testing at the Furbara firing range. Caproni Ca.331 C.N.jpg
The second Caproni Ca.331 prototype. Ordered as a second Ca.331 O.A. reconnaissance aircraft prototype, it was completed instead as the first prototype of the Ca.331 C.N. night fighter as seen here, probably during weapons testing at the Furbara firing range.

By 1942, the war situation had changed to the point where Italy perceived a greater need for air defense capabilities. Accordingly, in May 1942 the Italian Air Ministry ordered the second Ca.331 prototype, originally planned as a second Ca.331 O.A., to be completed instead as the first prototype of a night fighter version of the aircraft. The night fighter prototype was designated Ca.331 C.N., with "C.N." standing for Caccia Notturna, Italian for "Night Fighter" [2] it also was known as the Ca.331B.[ citation needed ]

The Ca.331 C.N., which first flew in the summer of 1942, differed from the Ca.331 O.A. in having a stepped cockpit and less nose glazing. Its armament was installed in the spring of 1943 and consisted of four fixed forward-firing 20-millimeter Mauser MG 151 cannon and four 12.7-millimeter (0.5-inch) Breda-SAFAT machine guns—two of them forward-firing and fixed, one in a dorsal turret, and one in a ventral mount. Its original 596-kilowatt (800-horsepower) 12-cylinder air-cooled Isotta Fraschini Delta IV engines were replaced by the spring of 1943 with 633-kilowatt (850-horsepower) versions of the Delta IV with two-stage superchargers. [2] Like the Ca.331 O.A. prototype, it was at the Caproni company airfield at Taliedo when the Italian armistice with the Allies took effect on 8 September 1943, and it suffered the same fate: The Germans seized it there, disassembled it and shipped it to Germany.[ citation needed ]

A second Ca.331 C.N. prototype was constructed, differing from the first in having an armament of two 20-millimeter Ikaria cannon and four 12.7-millimeter Breda-SAFAT machine guns, all mounted in the nose. It was still being assembled when Italy surrendered to the Allies on 8 September 1943, was seized by the Germans and shipped to Germany, destined never to fly. [2] [ citation needed ]

Various modifications were proposed for production models of the Ca.331 C.N. Engines proposed for production models included the German 1,099-kilowatt (1,475-horsepower) Daimler-Benz DB 605, the Italian 931-kilowatt (1,250-horsepower) Isotta Fraschini Zeta R.C.42, and the Fiat RA-1050 RC.58 Tifone (Italian for "Typhoon"), an Italian copy of the DB 605 expected to give the Ca.331 C.N. a top speed of 644 kilometers (400 mi) per hour. Italian authorities also made various aggressive plans for production of Ca.331 C.N. aircraft, with as many as 100 built by May 1942 toward an eventual total production run of 1,000 aircraft. However, all production plans were cancelled in January 1943.[ citation needed ]

Other variants

Germany considered building a dual-control combat trainer version of the Ca.331 to be designated the Ca.331G. Nothing came of the proposal. An anti-tank version mounting a 37-millimeter cannon also was proposed, but none were built.[ citation needed ]

Operators

Flag of Italy (1861-1946) crowned.svg  Kingdom of Italy
Flag of Germany (1935-1945).svg  Germany

Variants

Caproni Ca.331 O.A. (or Caproni Ca.331A)
Tactical reconnaissance aircraft/light bomber prototype (one built)
Caproni Ca.331 C.N. (or Caproni Ca.331B)
Night fighter prototype (two built)
Caproni Ca.331G
Proposed German dual-control combat trainer (none built)
Caproni Ca.333
Proposed floatplane version

Specifications (Ca.331 C.N.)

Data fromItalian Civil & Military Aircraft 1930-1945 [5]

General characteristics

Performance

Armament

6 x 12.7 mm (0.5 in) Breda-SAFAT machine guns in the stepped "solid" nose.
2 x 12.7 mm (0.5 in) Breda-SAFAT machine guns machine guns in dorsal and ventral defensive positions.
or
2 x 12.7 mm (0.5 in) Breda-SAFAT machine guns machine guns and 4 x 20 mm (0.8 in) Mauser cannon.
or
6 x 20 mm (0.8 in) Ikaria cannon in a ventral bulge.
(In the bomb bay)
1,000 kg (2,205 lb) of small bombs.

Notes

  1. Caproni Ca.331
  2. 1 2 3 4 Green, William; Gordon Swanborough (1994). The Complete Book of Fighters: An Illustrated Encyclopedia of Every Fighter Aircraft Built and Flown. New York: SMITHMARK Publishers. p. 108. ISBN   0-8317-3939-8.
  3. 1 2 Aerofan Issue 76, January–March 2001
  4. For a discussion of these issues, see warbirdsform.com GOT: The Caproni Ca. 331.[ verification needed ]
  5. Thompson, Jonathan (1963). Italian Civil & Military Aircraft 1930-1945 (1st ed.). New York: Aero Publishers Inc. pp.  114–117. ISBN   0-8168-6500-0.

Related Research Articles

<span class="mw-page-title-main">Caproni Ca.5</span> Italian heavy bomber of World War I

The Caproni Ca.5 was an Italian heavy bomber of World War I and the postwar era. It was the final version of the series of aircraft that began with the Caproni Ca.1 in 1914.

<span class="mw-page-title-main">Breda Ba.88 Lince</span> Type of aircraft

The Breda Ba.88 Lince ("Lynx") was a ground-attack aircraft used by the Italian Regia Aeronautica during World War II. Its streamlined design and retractable undercarriage were advanced for the time, and after its debut in 1937 the aircraft established several world speed records. However, when military equipment was installed on production examples, problems of instability developed and the aeroplane's general performance deteriorated. Eventually its operational career was cut short, and the remaining Ba.88 airframes were used as fixed installations on airfields to mislead enemy reconnaissance. It represented, perhaps, the most remarkable failure of any operational aircraft to see service in World War II.

Breda-SAFAT was an Italian weapons manufacturer of the 1930s and 1940s that designed and produced a range of machine-guns and cannon primarily for use in aircraft. Based on the M1919 Browning machine gun, the Italian guns were chambered to fire indigenous ammunition with 7.7 mm (0.303 in) and 12.7 mm (0.500 in) calibres, predominantly ball, tracer for the 7.7mm, including high explosive incendiary tracer (HEI-T), or armour-piercing (AP) for the 12.7mm.

<span class="mw-page-title-main">Ambrosini SAI.207</span> Italian fighter aircraft

The Ambrosini SAI.207 was a light fighter interceptor built entirely from wood and developed in Italy during World War II. Powered by a single 750 hp Isotta Fraschini Delta, the SAI.207 enjoyed limited success during evaluation of the 12 pre-production aircraft.

<span class="mw-page-title-main">Ambrosini SAI.403</span> Type of aircraft

The Ambrosini SAI.403 Dardo ("Dart") was a light fighter aircraft built in Italy during World War II.

<span class="mw-page-title-main">Caproni Ca.314</span> Italian attack/torpedo bomber

The Caproni Ca.314 was an Italian twin-engine attack/torpedo bomber aircraft, used in World War II.

<span class="mw-page-title-main">Caproni Ca.135</span> Type of aircraft

The Caproni Ca.135 was an Italian medium bomber designed in Bergamo in Italy by Cesare Pallavicino. It flew for the first time in 1935, and entered service with the Peruvian Air Force in 1937, and with the Regia Aeronautica in January 1938.

<span class="mw-page-title-main">Caproni Ca.111</span> Type of aircraft

The Caproni Ca.111 was a long-range reconnaissance aircraft and light bomber produced in Italy during the 1930s. It was a derivative of the Ca.101.

<span class="mw-page-title-main">Breda Ba.201</span> Italian dive bomber prototype

The Breda Ba.201 was an Italian dive bomber designed during World War II, that never entered production.

<span class="mw-page-title-main">Caproni Ca.313</span> Reconnaissance bomber developed by Caproni in Italy prior to World War II

The Caproni Ca.313 was an Italian twin-engine reconnaissance bomber of the late-1930s. It was a development of the Ca.310. Its variants were exported to several other countries.

<span class="mw-page-title-main">Caproni Vizzola F.5</span> Italian fighter

The Caproni Vizzola F.5 was an Italian fighter aircraft that was built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.

The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.

<span class="mw-page-title-main">Caproni Ca.355</span> Italian WWII dive bomber

The Caproni Ca.355 Tuffo was a low-wing single-engine dive bomber, designed and built by the Italian Caproni company in 1941, which never proceeded beyond a single prototype. Derived from Ca.335 Mistral, the Ca.355 was proposed to equip the Regia Aeronautica, but it was found to offer little advantage over the German Junkers Ju 87 "Stuka" and the project was abandoned.

<span class="mw-page-title-main">Caproni Vizzola F.4</span> Type of aircraft

The Caproni Vizzola F.4 was an Italian fighter aircraft prototype that was designed in 1937 and built from 1939. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.

<span class="mw-page-title-main">Caproni Vizzola F.6</span> Type of aircraft

The Caproni Vizzola F.6 was a World War II-era Italian fighter aircraft built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear. Only two prototypes were built, one designated F.6M and the other designated F.6Z.

<span class="mw-page-title-main">Piaggio P.50</span> Type of aircraft

The Piaggio P.50 was an Italian prototype heavy bomber designed and built by Piaggio for the Regia Aeronautica.

<span class="mw-page-title-main">Macchi M.6</span> Type of aircraft

The Macchi M.6 was an Italian flying boat fighter prototype of 1917.

The Caproni Ca.350 was an Italian single-engined project for a two-seat fighter-bomber/reconnaissance aircraft of the 1930s. Designed by Cesare Pallavicino to meet a requirement of the Regia Aeronautica, it was an innovative and fast design, to have been powered by an Isotta Fraschini Zeta R.C.42, but no aircraft were built.

<span class="mw-page-title-main">Reggiane Re.2004</span> Italian proposed fighter-bomber aircraft

The Reggiane Re.2004 was an Italian single-engined monoplane made by Reggiane and designed by Roberto Longhi. The aircraft never passed the preliminary stages.

The Caproni Ca.134 was a biplane reconnaissance aircraft built by the Italian company Caproni in the 1930s.

References