Type H | |
---|---|
FBA Type H flying boat on display at the Royal Museum of the Armed Forces and of Military History, Brussels, Belgium | |
Role | Reconnaissance flying boat |
Manufacturer | FBA |
Designer | Louis Schreck |
First flight | 1915 |
Introduction | 1916 |
Status | one example preserved |
Number built | ca. 2000 |
The FBA Type H was a French reconnaissance flying boat produced in large numbers in France and Italy during World War I by Franco-British Aviation. [1]
A development of the FBA Type A, the Type H shared the same basic pusher biplane configuration, but was a larger and heavier machine based on a Donnet-Lévêque design and powered by a water-cooled engine in place of the earlier type's rotary. Most French-built Type H aircraft had water-cooled V-8 Hispano-Suiza 8A variants with powers of 150 or 170 hp (110 or 130 kW), though a minority had 160 hp (120 kW) Lorraine 8Ns. [1] Some Italian built Type Hs also used the higher-power Hispano motor but more had 180 hp (130 kW) Isotta Fraschini V.4B or 150 hp (110 kW) engines of the same make, [1] both six-cylinder inlines. [2]
The aircraft was a two bay biplane with the smaller span lower wing positioned just above the central fuselage on four supporting struts. There was no stagger and simple parallel interplane struts separated the bays; an extra, outward leaning pair supported the overhanging upper plane on each side. Ailerons were mounted only on this upper wing. The single pusher engine was mounted on struts just below the upper wing, its two blade propeller turning in a cut-out in the wing trailing edges. [1] [3]
The hull of the Type H was, like that of its predecessors, a single step design. A pair of flat bottomed floats, mounted below the outer interplane struts, stabilized the aircraft on the water. Two flight crew members were accommodated side-by-side and a front gunner sat separately in the nose. [1] The rounded, finless rudder mounted above the high tailplane distinguished the Type H from earlier FBA flying boats, which had angular vertical tails. [3] [4]
Aside from its production in France, the type was also built extensively under licence in Italy by several firms, most importantly by SIAI.
The Type H was the major production version of the FBA series and was operated by several air arms during the latter part of the First World War. The great majority served with French and Italian forces. [1] The Escadrille des Hydroavions of the Belgian Air Force was also equipped with the type and one survives on display in the Royal Museum of the Armed Forces and of Military History in central Brussels. [8] Four ex-Italian, Isotta Fraschini powered Type Hs were used by the British Royal Navy as training machines. [9] [10]
From 1926 to at least 1929 twelve FBA Hs were used in Canada by the Compagnie Aerienne Franco Canadienne to make an aerial photographic survey of both cities and countryside. [11]
Data from French aircraft of the First World War [12]
General characteristics
Performance
Armament
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Nieuport 27 was a World War I French sesquiplane fighter aircraft designed by Gustave Delage. The 27 was the last of the line of Nieuport "V-strut" single seat fighters that began with the Nieuport 10 of 1914. Operational examples supplemented the very similar Nieuport 24 and 24bis in operational squadrons in late 1917 and many would also be used as advanced trainers.
The Nieuport 12 was a French sesquiplane reconnaissance, fighter aircraft and trainer used by France, Russia, Great Britain and the United States during World War I. Later production examples were built as trainers and served widely until the late 1920s.
The Caudron R.4 was a French World War I twin-engine biplane reconnaissance/artillery cooperation aircraft and the progenitor of a series of successful aircraft that filled a variety of roles with the French Aéronautique Militaire.
Aéroplanes Voisin was a French aircraft manufacturing company established in 1905 by Gabriel Voisin and his brother Charles, and was continued by Gabriel after Charles died in an automobile accident in 1912; the full official company name then became Société Anonyme des Aéroplanes G. Voisin. During World War I, it was a major producer of military aircraft, notably the Voisin III. After the war Gabriel Voisin abandoned the aviation industry, and set up a company to design and produce luxury automobiles, called Avions Voisin.
The Caudron R.11, was a French three-seat twin-engine long range escort fighter biplane developed and produced by Caudron during the First World War.
The Donnet-Denhaut flying boat was a maritime patrol and anti-submarine warfare aircraft produced in France during the First World War. Known at the time simply as "Donnet-Denhaut" or "DD" flying boats, the DD-2, DD-8, DD-9, and DD-10 designations were applied retrospectively to denote the various changes in configuration made during their service life.
The FBA Type A and the similar Type B and C were a family of reconnaissance flying boats produced in France prior to and during World War I.
The Letord Let.5 was probably the most numerous of a family of 3-seat reconnaissance bombers, designed and built in France from 1916, originally to an A3 specification from the STAé.
The B.A.J. IV C2 was a French two-seat fighter designed and built by Boncourt-Audenis-Jacob,, at Bron.
The Borel-Odier Bo-T was a French twin-engined float biplane designed by Borel but built by Antoine Odier for the French Navy.
The Adolphe Bernard AB was a twin-engined French biplane aircraft, built near the end of the First World War. Ten AB 1 BN2 bombers were produced for the Armée de l'Air but did not reach squadron service; post-war, two civil derivatives were considered but only one aircraft was built.
The Voisin Triplanes were large experimental bombers built by Voisin in 1915 and 1916. After unsuccessful trials of the 1915 prototype a modified version with more powerful engines was built in 1916, as the Voisin E.28, but the type did not enter production.
The CAMS 36 was a 1920s French flying boat designed and built by Chantiers Aéro-Maritimes de la Seine. It was originally conceived as a single-seat fighter but evolved as a racer to compete in the 1922 Schneider Trophy race. Lack of funds in 1922 and an accident in 1923 meant the two aircraft built failed to participate in a Schneider race.
The Tellier T.2 was a French two-seat patrol biplane flying-boat built by Société Alphonse Tellier et Cie à Neuilly (hull) and Voisin (wings). The wooden-hull flying boat used a 150 kW (200 hp) Hispano-Suiza 8Ba engine and was first flown in June 1916.
The Tellier T.3 was a French two-seat patrol biplane flying-boat designed and built by Société Alphonse Tellier et Cie à Neuilly (Tellier) and also produced by Société Anonyme des Établissements Nieuport (Nieuport).
The Morane-Saulnier S,also known as MoS-10, was a large twin-engined biplane bomber designed and built in France around 1916. Powered by two 250 hp (190 kW) Renault 12E V-12 water-cooled piston engines, with Hazet type side radiators, the 'S' was given the STAé designation MoS-10 and serial MS-625.
The de Marçay 2 C1 was a single seat biplane fighter designed in France and first flown in 1919. It did not go into production.
The Blériot 71 was a large First World War French heavy night bomber designed and built by Blériot to the BN3 specification. Only a single prototype was built, which was damaged beyond repair on 15 May 1918.
The Blériot 73 was a large First World War French heavy night bomber designed and built by Blériot to the BN3 specification. Only a single prototype was built, which crashed on landing from its first flight, killing the pilot. The Blériot 74, Blériot 75 and Blériot 76, respectively, a heavy bomber / airliner, airliner and heavy bomber, directly evolved mfrom the Blériot 71 / Blériot 73 bombers.
The Voisin XII was a prototype French two-seat four-engine biplane bomber built near the end of the First World War but which did not enter service.