| GSWR 333/GSR 338/342 Class | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| Class 342 as built except where noted [1] : 113–115, 269–270 | |||||||||||||||||||||||||||
The Great Southern and Western Railway (GS&WR) Class 333 consistent of eight 4-4-0 mixed-traffic locomotives designed by Robert Coey and built by Inchicore railway works in 1907/8. In 1936, the successor company - the Great Southern Railways (GSR) - built five similar engines known as GSR Class 342. [1] : 113–115, 269–270
The design used the same taper boiler and 18 in x 20 in cylinders as Coey's express 4-4-0 express passenger engine 321; however, the smaller driving wheels and less than 16 long ton maximum axle load were suitable for go anywhere and secondary passenger and mixed duties. [2]
The later Class 342 locomotives were essentially modeled on the 1927 rebuild of locomotive No. 338 of the 333 Class. [1] : 113–115, 269–270
In practice, all members of these classed were treated interchangeably for operational purposes. A 16 long tons (16 t) maximum axle load allowed the class to be used almost anywhere. They were assessed in 1948 as quite powerful and fast and especially useful for passenger specials. [1] : 113–115, 269–270
In 1946, No. 346 (which was an oil burner at the time) was lent to the Great Northern Railway (GNRI) to operate the Dublin-Bundoran express as far as Dundalk. [1] : 270
Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.
Under the Whyte notation, a 2-8-4 is a steam locomotive that has two unpowered leading wheels, followed by eight coupled and powered driving wheels, and four trailing wheels. This locomotive type is most often referred to as a Berkshire, though the Chesapeake and Ohio Railway used the name Kanawha for their 2-8-4s. In Europe, this wheel arrangement was mostly seen in mainline passenger express locomotives and, in certain countries, in tank locomotives.
The Indian Railways primarily operates fleet of electric and diesel locomotives, along with several compressed natural gas (CNG) locomotives. Steam locomotives are operated on a few World Heritage Sites and also run occasionally as heritage trains. A locomotive is also known as a loco or more popularly as an engine. The country's first steam locomotive ran on the Red Hill Railway from Red Hills to the Chintadripet bridge in Madras in 1837.
The Great Southern Railways Class 800 steam locomotives were built principally for express passenger work on the Dublin to Cork main line of that company. These locomotives were designed under the supervision of E. C. Bredin with his Chief Draughtsman, H. J. A. Beaumont, preparing the drawings. They were the largest and most powerful engines ever to run in Ireland by quite a large margin, and the only three express passenger locomotives to be built in an independent Ireland.
The GS&WR Class 2 was a lightweight 4-4-0 steam locomotive used by the Great Southern and Western Railway in Ireland in the late 19th and in the first half of the 20th century. They were the first locomotives of type 4-4-0 in Ireland.
The GS&WR Class 101, classified as Class 101 or Class J15 by the Great Southern Railways, was a class of 0-6-0 steam locomotives designed for working goods traffic although they did, and were quite capable of, working branch and secondary passenger trains.
The Prussian S 6 was a class of German steam locomotive with a 4-4-0 wheel arrangement operated by the Prussian state railways for express train services.
The MGWR class E was a small 0-6-0T steam locomotive class designed in 1891 by Martin Atock, the then locomotive superintendent of the Midland Great Western Railway (MGWR) and twelve engines were built. After the MGWR was merged into Great Southern Railways (GSR) in 1925 they were designated Class 551 or J26. They were also known as the Irish Terrier class.
The South African Railways Class 16E 4-6-2 of 1935 was a steam locomotive.
The GS&WR 400 class or CIE class B2/B2a were a class of ten 4-6-0 steam locomotives built for the Great Southern & Western Railway (GS&WR) between 1916 and 1923 for express passenger duties on the Dublin to Cork main line. They proved initially unreliable but rebuilds from four to two cylinders between 1927 and 1937 for the seven survivors produced locomotives yielding satisfactory performance with the last two being withdrawn in 1961.
The Midland Great Western Railway (MGWR) A Class, later Inchicore Class D5, consisted of 6 4-4-0 express passenger locomotives built at Broadstone Works in the period 1902-1905. The largest express passenger locomotive in Ireland for a short while after introduction they were used on the MGWR's flagship services to Galway with most surviving until the 1950s albeit on less prestigious work.
The Great Southern and Western Railway (GS&WR) Class 341 consisted of a single 4-4-0 express passenger locomotive named Sir William Goulding introduced in 1913 for the Dublin—Cork route. Despite being an apparently capable design it was withdrawn in 1928.
The Great Southern and Western Railway (GS&WR) Class 362, also known as class B3, consisted of six locomotives designed by Robert Coey and built between 1905 and 1907 for goods traffic and was the first tender locomotive to utilise the 4-6-0 wheel arrangement in Ireland.
The Great Southern and Western Railway (GS&WR) Class 351 initially consisted of four 0-6-0 tender locomotives designed by Robert Coey for use on heavy freight trains on the main line. They were joined by four similar locomotives built in 1912 introduced by Richard Maunsell, these had detail differences such as larger cabs and higher running plates. They included an extended smokebox to which a Phoenix superheater was briefly trialed but abandoned. They were initially designated GS&WR Class 249 but were subsequently grouped into class 351.
The Great Southern and Western Railway (GS&WR) Class 368 consisted of four 2-6-0 tender locomotives designed by Robert Coey for use on heavy freight trains. on the main line.
The Great Southern and Western Railway (GS&WR) Classes 301. 305, 309 and 321 consisted of 26 4-4-0 tender locomotives designed by Robert Coey for passenger work and built between 1900 and 1907.
The DSER 20 class was a class of three 4-4-2T locomotives operated by the Dublin and South Eastern Railway and later the Great Southern Railways and CIÉ.
Dublin, Wicklow and Wexford Railway (DW&WR) 4 and 5 were a pair of 0-6-2T tank locomotives purchased from Kitson & Co. in 1897 and rebuilt as 0-6-0 tender Locomotives in 1908 due to a tendency to derail. Renumbered by Great Southern Railways to 448 and 449 they survived until 1940 and 1950 respectively.
The Great Southern and Western Railway (GS&WR) Class 37 consisted of six 4-4-2T tank engines. The first two built by locomotive superintendent Henry Ivatt (Snr.) were based on a previous 2-4-0T design by McDonnell, as were some 2-4-2Ts Ivatt produced two years earlier for the Kerry branches.
Robert Coey (1851–1934) was a locomotive superintendent of the Great Southern and Western Railway (GS&WR) of Ireland from 1896 until 1911.