General Electric LM1500

Last updated
LM1500
Type Gas turbine
National origin United States
Manufacturer General Electric
Developed from General Electric J79

The General Electric LM1500 is an industrial and marine gas turbine produced by GE Aviation. The LM1500 is a derivative of the General Electric J79 aircraft engine series. [1]

Contents

The LM1500 delivers up to 15,000 shaft horsepower (11,000 kW). [2]

History

The LM1500 was derived from the J79 engine in 1960. [3] Its first application was for the first US sea-going research hydrofoil, HS Denison. [1] Conversion as a marinised turboshaft engine involved two major changes: the addition of a free power turbine, and corrosion-protection by the addition of internal coatings and a maintenance scheme of freshwater rinsing to prevent salt damage. Naval fuels could also include diesel fuels with higher sulphur content than aviation-grade JP-5 fuel, but this was avoided in these early engines by keeping to JP fuels. [1]

Its first commercial use was as a catapult for launching aircraft. [4] Over time, its commercial applications widened to include marine propulsion [5] and its use at oil and gas pipeline compressor stations. [6]

Related Research Articles

Gas turbine Type of internal combustion engine

A gas turbine, also called a combustion turbine, is a type of continuous and internal combustion engine. The main elements common to all gas turbine engines are:

General Electric GE90

The General Electric GE90 is a family of high-bypass turbofan aircraft engines built by GE Aviation for the Boeing 777, with thrust ratings from 81,000 to 115,000 lbf. It entered service with British Airways in November 1995. It is one of three options for the 777-200, -200ER, and -300 versions, and the exclusive engine of the -200LR, -300ER, and 777F. It is the most powerful and was the largest jet engine, until its 6 in (15 cm) wider fan successor, the 110,000 lbf (490 kN) GE9X, powered the Boeing 777X first flight in January 2020.

GE Aviation, a subsidiary of General Electric, is headquartered in Evendale, Ohio, outside Cincinnati. GE Aviation is among the top aircraft engine suppliers, and offers engines for the majority of commercial aircraft. GE Aviation is part of the General Electric conglomerate, which is one of the world's largest corporations. The division operated under the name of General Electric Aircraft Engines (GEAE) until September 2005. GE Aviation's main competitors in the engine market are Rolls-Royce and Pratt & Whitney. GE operates two joint ventures with Safran Aircraft Engines of France, CFM International and CFM Materials.

General Electric TF39 Turbofan aircraft engine

The General Electric TF39 was a high-bypass turbofan engine that was developed to power the Lockheed C-5 Galaxy. The TF39 was the first high-power, high-bypass jet engine developed. The TF39 was further developed into the CF6 series of engines, and formed the basis of the General Electric LM2500 marine and industrial gas turbine. On September 7, 2017, the last active C-5A powered with TF39 engines made its final flight to Davis-Monthan Air Force Base for retirement. The TF39 was effectively retired, and all remaining active C-5 Galaxys are now powered by General Electric F138-GE-100 (CF6) engines.

IHI Corporation

IHI Corporation, formerly known as Ishikawajima-Harima Heavy Industries Co., Ltd., is a Japanese engineering company headquartered in Tokyo, Japan that produces and offers ships, space launch vehicles, aircraft engines, marine diesel engines, gas turbines, railway systems, turbochargers for automobiles, plant engineering, industrial machinery, power station boilers and other facilities, suspension bridges and other structures.

General Electric LM2500 Industrial and marine gas turbine produced by GE Aviation

The General Electric LM2500 is an industrial and marine gas turbine produced by GE Aviation. The LM2500 is a derivative of the General Electric CF6 aircraft engine.

General Electric LM6000

The General Electric LM6000 is a turboshaft aeroderivative gas turbine engine. The LM6000 is derived from the CF6-80C2 aircraft turbofan. It has additions and modifications designed to make it more suitable for marine propulsion, industrial power generation, and marine power generation use. These include an expanded turbine section to convert thrust into shaft power, supports and struts for mounting on a steel or concrete deck, and reworked controls packages for power generation. It has found wide use including peaking power plants, fast ferries and high speed cargo ship applications.

General Electric J79

The General Electric J79 is an axial-flow turbojet engine built for use in a variety of fighter and bomber aircraft and a supersonic cruise missile. The J79 was produced by General Electric Aircraft Engines in the United States, and under license by several other companies worldwide.

Jet fuel Type of aviation fuel

Jet fuel or aviation turbine fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.

Allison J35

The General Electric/Allison J35 was originally developed by General Electric in parallel with the Whittle-based centrifugal-flow J33, and was the United States Air Force's first axial-flow compressor engine. The J35 was fairly simple, consisting of an eleven-stage axial-flow compressor and a single-stage turbine. With the afterburner, which most models carried, it produced a thrust of 7,400 lbf (32.92 kN).

General Electric CF6 Turbofan aircraft engine family

The General Electric CF6, US military designation F103, is a family of high-bypass turbofan engines produced by GE Aviation. Based on the TF39, the first high-power high-bypass jet engine, the CF6 powers a wide variety of civilian airliners. The basic engine core also powers the LM2500, LM5000, and LM6000 marine and power generation turboshafts. It is gradually being replaced by the newer GEnx family.

General Electric CJ805

The General Electric CJ805 is a jet engine which was developed by GE Aviation in the late 1950s. It was a civilian version of the J79 and differed only in detail. It was developed in two versions. The basic CJ805-3 was a turbojet and powered the Convair 880, while CJ805-23, a turbofan derivative, powered the Convair 990 airliners.

Marine propulsion Systems for generating thrust for ships and boats on water

Marine propulsion is the mechanism or system used to generate thrust to move a ship or boat across water. While paddles and sails are still used on some smaller boats, most modern ships are propelled by mechanical systems consisting of an electric motor or engine turning a propeller, or less frequently, in pump-jets, an impeller. Marine engineering is the discipline concerned with the engineering design process of marine propulsion systems.

General Electric GE38

The General Electric GE38 is a gas turbine developed by GE Aviation for turboprop and turboshaft applications. It powers the Sikorsky CH-53K King Stallion as the T408.

General Electric T700

The General Electric T700 and CT7 are a family of turboshaft and turboprop engines in the 1,500–3,000 shp (1,100–2,200 kW) class.

General Electric T64 Turboshaft engine

The General Electric T64 is a free-turbine turboshaft engine that was originally developed for use on helicopters, but which was later used on fixed-wing aircraft as well. General Electric introduced the engine in 1964. The original engine design included technical innovations such as corrosion resistant and high-temperature coatings. The engine features a high overall pressure ratio, yielding a low specific fuel consumption for its time. Although the compressor is all-axial, like the earlier General Electric T58, the power turbine shaft is coaxial with the HP shaft and delivers power to the front of the engine, not rearwards. Fourteen compressor stages are required to deliver the required overall pressure ratio. Compressor handling is facilitated by 4 rows of variable stators. Unlike the T58, the power turbine has 2 stages.

The General Electric LMS100 is an aero derivative gas turbine produced by GE Distributed Power.

The General Electric LM500 is an industrial and marine gas turbine produced by GE Aviation. The LM500 is a derivative of the General Electric TF34 aircraft engine. Current versions of the LM500 deliver 6,000 shaft horsepower with a thermal efficiency of 31 percent at ISO conditions. It has been used in various applications such as in the Royal Danish Navy's Flyvefisken class patrol vessels, and in fast ferries.

The General Electric LM1600 is an industrial and marine gas turbine produced by GE Aviation. The LM1600 is a derivative of the General Electric F404 aircraft engine series. The LM1600 delivers 20,000 shaft horsepower (shp) (14,920 kW) with a thermal efficiency of 37 percent at ISO conditions.

Free-turbine turboshaft

A free-turbine turboshaft is a form of turboshaft or turboprop gas turbine engine where the power is extracted from the exhaust stream of a gas turbine by an independent turbine, downstream of the gas turbine and is not connected to the gas turbine. This is opposed to the power being extracted from the power spool via a gear box.

References

  1. 1 2 3 E. E. Stoeckly (28 February 1965). Marinization of The General Electric LM 1500 Gas Turbine. Gas Turbine Conference and Products Show. Washington, D. C.: ASME. doi: 10.1115/65-GTP-20 .
  2. Liang Yun; Alan Bliault (18 March 2012). High Performance Marine Vessels. Springer Science & Business Media. pp. 184–. ISBN   978-1-4614-0868-0.
  3. National Aeronautics. 1963.
  4. Gas & Oil Power. Whitehall Technical Press. 1964.
  5. Bureau of Ships Journal. Bureau of Ships, Department of the Navy. 1963.
  6. Fuel Flexibility in GE LM Engines, by Mark Lipton, GE Energy on 12 Oct 2005. Retrieved February 16th, 2010.