A clipper was a type of mid-19th-century merchant sailing vessel, designed for speed. Clippers were generally narrow for their length, small by later 19th-century standards, could carry limited bulk freight, and had a large total sail area. "Clipper" does not refer to a specific sailplan; clippers may be schooners, brigs, brigantines, etc., as well as full-rigged ships. Clippers were mostly constructed in British and American shipyards, although France, Brazil, the Netherlands, and other nations also produced some. Clippers sailed all over the world, primarily on the trade routes between the United Kingdom and China, in transatlantic trade, and on the New York-to-San Francisco route around Cape Horn during the California Gold Rush. Dutch clippers were built beginning in the 1850s for the tea trade and passenger service to Java.
Cutty Sark is a British clipper ship. Built on the River Leven, Dumbarton, Scotland in 1869 for the Jock Willis Shipping Line, she was one of the last tea clippers to be built and one of the fastest, coming at the end of a long period of design development for this type of vessel, which halted as steamships took over their routes. She was named after the short shirt of the fictional witch in Robert Burns' poem Tam o' Shanter, first published in 1791.
Thermopylae was an extreme composite clipper ship built in 1868 by Walter Hood & Co of Aberdeen, to the design of Bernard Waymouth of London. Designed for the China tea trade, she set a speed record on her maiden voyage to Melbourne of 63 days, still the fastest trip under sail.
Ariel was a clipper ship famous for making fast voyages between China and England in the late 1860s. She is most famous for almost winning The Great Tea Race of 1866, an unofficial race between Fuzhou, China and London with the first tea crop of the 1866 season.
Blackadder was a clipper, a sister ship to Hallowe'en, built in 1870 by Maudslay, Sons & Field at Greenwich for Jock Willis & Sons.
Norman Court was a composite built clipper ship, designed by William Rennie, measuring 197.4 ft x 33 ft x 20 ft, of 833.87 tons net. The ship was built in 1869 by A. & J. Inglis of Glasgow. On the night of 29 March 1883 in a strong gale she was driven ashore and wrecked in Cymyran Bay, between Rhoscolyn and Rhosneigr, Anglesey. All bar two of the crew were saved by lifeboats from nearby Holyhead. Andrew Shewan was captain of the Norman Court from her launch until he retired in ill-health in 1873, following an extraordinarily difficult passage from China. His son, also Andrew Shewan, who had previously sailed as first mate, became captain. It was this son Andrew Shewan who recounted many tales of the ship and of the clipper ships in his book Great Days Of Sail: Reminiscences of a Tea Clipper Captain, published in 1926 when he could plausibly claim to be the last surviving tea clipper captain. He died in December 1927.
Taitsing was a famous British tea clipper.
Sir Lancelot was a clipper ship which sailed in the China trade and the India-Mauritius trade.
Lammermuir, named for the Lammermuir Hills, was a tea clipper designed by William Pile. She was the first clipper owned by Jock Willis Shipping Line. She was a fast sailer, being the second ship home in the 1858-59 tea season. She was a favourite of John Willis senior.
In the middle third of the 19th century, the clippers which carried cargoes of tea from China to Britain would compete in informal races to be first ship to dock in London with the new crop of each season. The Great Tea Race of 1866 was keenly followed in the press, with an extremely close finish. Taeping docked 28 minutes before Ariel - after a passage of more than 14,000 miles. Ariel had been ahead when the ships were taken in tow by steam tugs off Deal, but after waiting for the tide at Gravesend the deciding factor was the height of tide at which one could enter the different docks used by each ship. The third finisher, Serica, docked an hour and 15 minutes after Ariel. These three ships had left China on the same tide and arrived at London 99 days later to dock on the same tide. The next to arrive, 28 hours later, was Fiery Cross, followed, the next day, by Taitsing.
The Memnon was the first clipper ship to arrive in San Francisco after the Gold Rush, and the only clipper to arrive in San Francisco before 1850. Built in 1848, she made record passages to San Francisco and to China, and sailed in the first clipper race around Cape Horn.
Cimba was a British-built clipper in the Australian wool trade. She sailed between London and Sydney for 20 years, from 1878 to 1898. In 1905, Cimba set the sailing ship record for a passage from Callao to Iquique, of 14 days.
Lahloo was a British tea clipper known for winning the Tea Race of 1870, and finishing second in the Tea Race of 1871. She sailed from Fuzhou to London with over a million pounds of tea in 1868.
The SS Erl King was built at A and J Inglis, Pointhouse, Glasgow and launched in 1865 and owned by Robertson & Co London. She was designed as an Auxiliary Steam Ship - steam power would be used to supplement the propulsion from the sails, when there was no wind or if there was a light head wind. She was fitted with a propeller that could be lifted up when sailing, so as to reduce drag. The engine was not powerful enough to push the ship, with all the windage of standing rigging, directly into a strong headwind. Auxiliary steam power had the advantage of allowing this vessel to use the Suez Canal when it opened in 1869 - something which was not possible for sailing vessels.
Lord of the Isles was the first iron-hulled tea clipper, built in Greenock in 1853. She served in the tea trade until 1862, and also made voyages to Australia. She is known for a record passage between Greenock and Shanghai, and for her close finish in the 1856 Tea Race from China to England, docking in London just ten minutes before Maury. This race was the basis for the plot of a 1927 movie by Cecil B. DeMille The Yankee Clipper.
Stornoway was a British tea clipper built by Alexander Hall and Sons in Aberdeen, Scotland in 1850. She was a further development by Hall on the clippers built in Aberdeen in 1848, being larger and more obviously suited to deep sea service. She was ordered by Jardine Matheson specifically for the tea trade. In the late 1840s, tea was available earlier in the season in China, so the first ships to load had to beat to windward against the north-east monsoon to get across the China Sea. The details of the hull shape designed by Hall had this requirement in mind.
Punjaub was a sail/paddle steamer frigate built for the Indian navy operated by the East India Company.
Windhover was a British tea clipper built in the closing years of construction of this sort of ship. She measured 847 tons NRT. Like the majority of the tea clippers built in the second half of the 1860s, she was of composite construction. She was built by Connell and Co, Glasgow, Scotland in 1868.
John Willis & Sons of London, also called the Jock Willis Shipping Line, was a nineteenth-century London-based ship-owning firm. It owned a number of clippers including the historic tea clipper Cutty Sark.
United Kingdom
