Witch of the Wave

Last updated
Witchofthewave.jpg
History
US flag 31 stars.svgUnited States
NameWitch of the Wave
Owner Glidden & Williams, Hunt & Peabody, Boston, MA
BuilderGeorge Raynes, Portsmouth, NH
Cost$80,000
LaunchedApril 5, 1851
FateSold to the Netherlands, 1855
Flag of the Netherlands.svgNetherlands
OwnerVan Eighen & Co., 1871
Acquired1855
RenamedElectra
FateListed in 1886 RAFS; not listed in 1887
General characteristics
Class and type Extreme clipper
Tons burthen1498 tons OM
Length220 ft. LOA
Beam40 ft.
Draft21 ft.
Notes Full-rigged ship, listed as barque in 1882 RAFS [1] [2]

Witch of the Wave was a long-lived extreme clipper in the California trade, with a sailing life of over 34 years. [1] In 1851, she sailed from Calcutta to Boston in 81 days, setting a record. It was renamed the Electra in 1871. [2]

Contents

Construction

Her figurehead was a young woman in a flowing white gossamer dress, with gold. One arm was extended, and she stood atop the crest of a wave in bare feet. The stern ornament was a seashell with a child, being drawn by dolphins. Both decorations were designed by John W. Mason, of Boston.

The cabins and staterooms featured luxurious finish work, "the wainscot of the main cabin being of rosewood, birdseye maple, satin and zebra wood, exquisitely polished, with cornices and mouldings of white and gold." [3]

Clark describes a party of two hundred people greeting the arrival of the Witch of the Wave in Salem, Massachusetts.

At about eleven o'clock, everything being ready, the Witch of the Wave, with colors flying and the Boston Cadet Band on board playing "The Star Spangled Banner," was towed out into the stream amid the shouts and cheers of a multitude of people, who thronged the wharves and shipyards along the river. After passing through the Narrows and rounding New Castle Point, the R. B. Forbes , which had been towing alongside, took her hawser out ahead and shaped a course for Cape Ann, which brought the wind well over the starboard quarter. The breeze had freshened, though the sea was still quite smooth, and this, with the clear, blue sky and bright sunshine, made a day altogether too fine to be spent on shore.

Many of those on board were interested to see what effect some canvas would have on the new clipper, so Mr. Raynes said to Captain Bertram that he thought it might perhaps be a good plan to set some sail, "just to assist the tow-boat a little." Captain Bertram, with a twinkle in his eye, said he thought so, too, and gave orders to loose the topsails, jib, and foretopmast staysail. The Witch of the Wave had a crew of Portsmouth riggers ... and it did not take them long to put the topsails on her. As soon as the yards were braced, she began to dart through the water like a fish, and soon ranged up on the weather beam of the R. B. Forbes, the hawser towing between them with the bight skipping along among the blue waves in showers of sparkling spray. On board the R. B. Forbes the safety valve was lifting, with steam at thirty pounds pressure ... There was great joy on board the Witch of the Wave, with clapping of hands and waving of handkerchiefs, while the band struck up "A Life on the Ocean Wave." The log was hove, and she took nine and one half knots off the reel. The topsail yards were then lowered on the caps, and the reef tackles hauled out, yet with only this small canvas, the R. B. Forbes did not have much towing to do ... [3]

Career

Clipper ship sailing card WITCH OF THE WAVE Clipper ship sailing card.jpg
Clipper ship sailing card

Witch of the Wave set the record for the passage from Sand Heads, Calcutta, to Boston—81 days, in 1853. During this passage, Witch of the Wave also tied a record set by the clipper Typhoon—37 days from Calcutta to the Cape of Good Hope.

On January 23, 1853, Witch of the Wave put into Singapore, just nine days out from Hong Kong. She had sustained damage to her rudder as the result of a collision with the barque Spartan.

On August 16, 1853, Witch of the Wave left Boston bound for San Francisco as a participant in a race with six other ships. She sailed the voyage under Capt. Lewis F. Miller and arrived in San Francisco after 117 days, beating the Raven, the Comet , and the Trade Wind. [4] Six clippers in all arrived in San Francisco within 30 hours of Witch of the Wave, the other two being Mandarin and Hurricane. [5]

In 1855, Witch of the Wave was renamed the Electra by new owners in Amsterdam. She was still listed in Amsterdam in 1871, with Van Eeghen & Co. as owners. [2]

Voyages

Related Research Articles

<i>Flying Cloud</i> (clipper) Clipper

Flying Cloud was a clipper ship that set the world's sailing record for the fastest passage between New York and San Francisco, 89 days 8 hours. The ship held this record for over 130 years, from 1854 to 1989.

<span class="mw-page-title-main">Robert Bennet Forbes</span> American diplomat

Captain Robert Bennet Forbes, was an American sea captain, China merchant and ship owner. He was active in ship construction, maritime safety, the opium trade, and charitable activities, including food aid to Ireland, which became known as America's first major disaster relief effort.

<span class="mw-page-title-main">Donald McKay</span> American shipbuilder

Donald McKay was a Canadian-born American designer and builder of sailing ships, famed for his record-setting extreme clippers.

<i>Stag Hound</i>

Stag Hound was launched on December 7, 1850 in East Boston, Massachusetts. Designed by shipbuilder Donald McKay for the California trade, she was briefly the largest merchant ship in the world. She was in active service from 1851 until her total loss in 1861.

<i>Surprise</i> (clipper)

Surprise was a California clipper built in East Boston in 1850. It initially rounded Cape Horn to California, but the vessel's owners, A. A. Low & Brother, soon found that the vessel performed well in Far Eastern waters. From that point onward the vessel spent much of her working life in the China trade, although the vessel also made three trips from the East Coast of the United States to California.

<i>Witchcraft</i> (clipper)

Witchcraft was a clipper built in 1850 for the California and China trade. She made record passages from Rio de Janeiro to San Francisco, and from San Francisco to Callao, Peru.

<i>Sea Serpent</i> (clipper) Extreme clipper launched in 1850

Sea Serpent was an 1850 extreme clipper that sailed in the San Francisco trade, the China trade, and the transatlantic lumber trade. She was one of the longest lived clippers, with a service life of 36 years and 5 months.

Harriet Hoxie was an 1851 clipper in the California trade. She was known for carrying cargoes of whale oil from Honolulu, and for importing the first Brown Leghorn chickens to the United States.

<i>Herald of the Morning</i> (clipper)

Herald of the Morning was one of the few clipper ships with a passage to San Francisco in less than 100 days.

<i>Memnon</i> (clipper)

The Memnon was the first clipper ship to arrive in San Francisco after the Gold Rush, and the only clipper to arrive in San Francisco before 1850. Built in 1848, she made record passages to San Francisco and to China, and sailed in the first clipper race around Cape Horn.

Race Horse

Race Horse was an 1850 clipper barque. She set a record of 109 days from New York to San Francisco during the first Clipper Race around the Horn.

Antelope was a medium clipper built in 1851 in Medford, near Boston, Massachusetts. She sailed in the San Francisco, China, and Far East trades, and was known for her fine finish work and for her crew's escape from pirates. She is often called Antelope of Boston to distinguish her from the extreme clipper Antelope of New York launched in 1852.

<i>John Gilpin</i> (clipper)

John Gilpin was an 1852 clipper in the California trade, named after the literary character John Gilpin. The ship was known for its 1852 race against the clipper Flying Fish, and for its collision with an iceberg.

<i>Golden West</i> (clipper)

Golden West was an 1852 extreme clipper built by Paul Curtis. The ship had a very active career in the California trade, the guano trade, the coolie trade, the Far East, and Australia. She made a record passage between Japan and San Francisco in 1856.

<i>Syren</i> (clipper)

Syren was the longest lived of all the clipper ships, with a sailing life of 68 years 7 months. She sailed in the San Francisco trade, in the Far East, and transported whaling products from Hawaii and the Arctic to New Bedford.

The schooner Anglona was the first American opium clipper. She sailed in the Chinese coastal trade in the 1840s, and had a famous race with the schooner Ariel around Lintin Island.

<i>Shooting Star</i> (clipper)

Shooting Star was an extreme clipper built in 1851 near Boston, in Medford, Massachusetts. She was the first "real clipper" to be built in Medford, and sailed in the San Francisco, China, and Far East trades. According to Howe and Matthews, she was known as "one of the fastest of the small clippers".

<i>Golden State</i> (clipper) 1852 American clipper ship

Golden State was an extreme clipper ship built by Jacob Aaron Westervelt in 1852 in New York City and launched on January 10, 1853. In 1883 she was renamed Anne C. Maguire.

<i>Hurricane</i> (clipper) American sailing ship, built 1851

Hurricane was a large extreme clipper of 1608 tons burthen built in Hoboken, New Jersey, United States in 1851. Reputedly the most extreme clipper ever built, Hurricane proved a very fast vessel, reportedly capable of speeds of up to 18 knots (33 km/h) in ideal conditions, and establishing a number of record passages in the early years of her career.

References

  1. 1 2 Crothers, William L. (1997). The American-Built Clipper Ship, 1850-1856: Characteristics, Construction, Details. Camden, ME: International Marine. pp. xv, etc. ISBN   0-07-014501-6.
  2. 1 2 3 4 Bruzelius, Lars (1997-08-13). "Clipper Ships: "Witch of the Wave" (1851)". The Maritime History Virtual Archives. Retrieved Sep 13, 2010.
  3. 1 2 Clark, Arthur H. (1910). The Clipper Ship Era, An Epitome of Famous American and British Clipper Ships, Their Owners, Builders, Commanders, and Crews, 1843-1869. Camden, ME: G.P. Putnam’s Sons. pp. 166–169.
  4. Walton Advertising and Printing Company, Boston. (1913). Some ships of the clipper ship era, Their builders, owners, and captains. Boston, MA: Printed for the State Street Trust Company. p. 25. ISBN   9781444607550.
  5. 1 2 Howe, Octavius T; Matthews, Frederick C. (1927). American Clipper Ships 1833-1858. Volume 2, Malay-Young Mechanic. Salem, MA: Marine Research Society. p. 730.