Holden FE

Last updated

Holden FE
1956-58 FE Special Sedan Ascot Grey==.JPG
Holden Special Sedan
Overview
Manufacturer Holden (General Motors)
Also calledHolden Standard
Holden Business Sedan
Holden Special
Holden Utility
Holden Panel Van
ProductionJuly 1956 – April 1958
Body and chassis
Class Mid-size
Body style 4-door sedan
5-door station wagon
2-door coupé utility
2-door panel van
Layout FR layout
Powertrain
Engine 2.2 L (132.5 cu in) I6
Transmission 3-speed manual
Dimensions
Wheelbase 105.0 inches (2667mm) [1]
Length176.0 inches (4470mm) [1]
Width67.0 inches (1702mm) [1]
Height61.0 inches (1549mm) [1]
Curb weight 2380lb (1080kg) [1]
Chronology
Predecessor Holden FJ
Successor Holden FC

The Holden FE is an automobile produced by Holden in Australia from 1956 until 1958. It was also the first Holden to be assembled in New Zealand, where General Motors New Zealand built their first example on 31 January 1957. [2]

Contents

Overview

The FE models were built on a longer wheelbase than the FJ series Holdens which they replaced, and they featured totally different styling, the FJ models having used a body shape carried over from the original Holden 48-215 series introduced in 1948. A single piece windscreen was now fitted and other improvements included a 12-volt electrical system (replacing the previous 6-volt system), improved steering, a front stabiliser bar and wider wheel rims. All models used a 2262 cc in-line six cylinder engine, coupled with a 3-speed manual gearbox. Engine improvements over the FJ included the use of bigger valves and an increased compression ratio of 6.8:1, which increased the power output from 45 kW (60 hp) to 53 kW (71 hp). [3]

Model range

The seven Holden FE models series were marketed as follows:

When introduced in July 1956, the FE range consisted of the Holden Standard Sedan, Holden Business Sedan and Holden Special Sedan, the names designating different levels of equipment and interior trim. The existing FJ series Holden Utility and Holden Panel Van models continued alongside the new sedans, with the FE Utility replacing its FJ counterpart in February 1957. Two station wagon models, the Holden Standard Station Sedan and the Holden Special Station Sedan were released in March 1957, marking the first time that Holden had included a wagon in its range since the marque was introduced in 1948. The FE Panel Van replaced its FJ predecessor in May 1957, bringing the FE range up to its full complement of seven models. [1]

The FE was also the first Holden to be assembled locally in New Zealand, in 1957 and 1958.

Production and replacement

After a production run of 155,161 vehicles the entire FE range was replaced by the Holden FC series in May 1958. [6]

Related Research Articles

Holden Astra Motor vehicle

The Holden Astra is a small car formerly marketed by Holden. The first couple of generations of Astra were made only for Australia, and was a derivative of the locally produced Nissan Pulsar. With the Button car plan coming into effect, it was replaced by the Holden Nova, a rebadged Toyota Corolla.

Holden Kingswood Motor vehicle

The Holden Kingswood is a full-size car that was manufactured in Australia by Holden, from the beginning of the HK series in 1968 through to the conclusion of the WB series in 1984. Prior to 1968, the full-size Holden range of family cars comprised the Holden Standard, the Holden Special, and Holden Premier models. Initially, the HK range of models included the basic Holden Belmont, the Kingswood, and the luxury-oriented Holden Premier, all of which were manufactured in a choice of sedan and station wagon bodies. Commercial variants were offered in three types: coupé utility, panel van, and later from 1971, a heavy-duty Holden One Tonner cab chassis. The utility (ute) version was originally marketed in both Belmont and Kingswood configurations. However, after the Belmont name was deleted from commercials at the end of HQ in late 1974, the base model commercials were sold only with the "Holden" badge.

Holden Gemini Motor vehicle

The Holden Gemini is a compact car that was produced by Holden and sold in Australasia from 1975 to 1986. It was based on the Japanese Isuzu Gemini, one of the many models based on the GM T-car platform.

Panel van Cargo vehicle based on passenger car chassis

A panel van, also known as a blind van, car-derived van or sedan delivery, is a small cargo vehicle utilizing a passenger car chassis, typically with a single front bench seat and no side windows behind the B-pillar. Panel vans are smaller than panel trucks or cargo vans, both of which utilize body-on-frame truck chassis.

Holden EH Automobile produced by General Motors-Holden in Australia from 1963 to 1965

The Holden EH is an automobile produced by General Motors-Holden in Australia from 1963 to 1965. The EH was released in August 1963 replacing the Holden EJ series and was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. A larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gearbox or the "Hydramatic" 4 stage automatic transmission with a .The Controlled Coupling Hydramatic used in the EH was actually a four stage although it effectively worked as a three speed unit except at full throttle. The 179 ci (2900cc) engine was initially only sold with the "Hydramatic". The first EH with a 179 ci engine and a manual gear box was called the "EH-S4", fitted with an upgraded manual gearbox, with stronger gears than the 149ci gear box and an upgraded clutch. The three-speed manual gearboxes had no synchromesh on first gear and only synchromesh on the second and third 'top gear'

Holden Special Motor vehicle

The Holden Special is a mid-size car that was manufactured by Holden for Australasia. Introduced as the top-level trim in the new Holden FJ range of 1953, the Special was complemented by the entry-level Holden Standard and the mid-range Holden Business. The Business was in fact already available, introduced in July 1953 in the 48 series first seen in 1948. Three months later, the FJ was introduced, therefore forming a three-model lineup based around one car. A "Standard"-type variant also existed in the 48 series, but had been marketed simply as the "Holden".

Holden Commodore (VX) Motor vehicle

The Holden Commodore (VX) is an executive car that was produced by Holden from 2000 to 2002. It was the second iteration of the third generation of the Commodore. Its range included the luxury variants, Holden Berlina (VX) and Holden Calais (VX), and it formed the basis for a new generation Holden Ute (VU) coupé utility and Holden Monaro (V2) coupé.

Holden FJ Motor vehicle

The Holden FJ series is a range of motor vehicles which was produced in Australia by Holden from 1953 until 1956. The FJ was the second model of an "all Australian car" manufactured by Holden and was based upon the established 48-215 series, commonly referred to as the "FX".

Ford Falcon (XP) Motor vehicle

The Ford Falcon (XP) is a mid-sized car produced by Ford Australia from 1965 to 1966. It was the fourth and last iteration of the first generation of the Falcon, and also included the Ford Fairmont (XP), the luxury-oriented version.

Ford Falcon (XY) Car produced by Ford Australia

The Ford Falcon (XY) is a full-size car that was produced by Ford Australia from 1970 to 1972. It was the fourth and last iteration of the second generation of the Falcon and also included the Ford Fairmont (XY)—the luxury-oriented version.

Holden HQ Motor vehicle

The Holden HQ series is a range of automobiles that was produced by Holden in Australia from 1971 to 1974. The HQ was released on 15 July 1971, replacing the Holden HG series. It was the first ground-up redesign of the Holden line since its original release in 1948, and included an all-new body, chassis, and suspension. The HQ was later developed into a series of successor models, finally ending production when the WB series was discontinued in 1984.

Holden HK Motor vehicle

The Holden HK series is an automobile which was produced by Holden in Australia from 1968 to 1969. Introduced in January 1968, the HK range progressively replaced the Holden HR series which had been in production since 1966. HK models were both larger and heavier than their predecessors and the range would ultimately include thirteen different models against the eight of the HR range. The Holden HK was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names.

Holden HJ Motor vehicle

The Holden HJ is a series of automobiles which were produced by Holden in Australia from 1974 to 1976. The HJ series was released on 4 October 1974 and was an improved and facelifted version of the superseded Holden HQ series which had been in production since 1971.

Holden EJ Motor vehicle

The Holden EJ is a motor vehicle produced by General Motors-Holden's in Australia from 1962 to 1963. Introduced in July 1962, the EJ replaced the Holden EK series.

Holden FC Motor vehicle

The Holden FC series is an automobile produced by Holden in Australia from 1958 to 1960. Introduced on 6 May 1958, the FC is a facelifted and improved version of the Holden FE series, which it replaced. Although it is exclusively an Australian design, the styling is reminiscent of a scaled-down North American 1955 Chevrolet.

Holden HZ Motor vehicle

Holden HZ is a full-sized automobile which was produced in Australia between October 1977 and April 1980 by Holden in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand.

Holden FB Motor vehicle

The Holden FB is an automobile produced by Holden in Australia from 1960 to 1961. Introduced on 14 January 1960, the FB series replaced the Holden FC range.

Holden EK Motor vehicle

The Holden EK series is a motor vehicle produced by Holden in Australia from 1961 to 1962. Introduced on 2 May 1961, the EK series was a facelifted version of the Holden FB, which it replaced.

Holden HD Motor vehicle

The Holden HD series is a range of automobiles which were produced by Holden in Australia from 1965 to 1966.

Holden HR Motor vehicle

The Holden HR is an automobile that was produced by Holden in Australia from 1966 to 1968.

References

  1. 1 2 3 4 5 6 7 8 Holden FE Specifications Retrieved from Unique Cars and Parts on 22 August 2008
  2. Webster, Mark (2002), Assembly: New Zealand Car Production 1921-98, Birkenhead, Auckland, New Zealand: Reed, p. 70, ISBN   0-7900-0846-7
  3. The Holden FE Retrieved from Unique Cars and Parts on 22 August 2008
  4. 1 2 3 Sales brochure for FE series Holden Sedans
  5. 1 2 Sales brochure for FE series Holden Utility & Panel Van
  6. Norm Darwin, 100 Years of GM in Australia, 2002, pages 228-229