Holden 48-215

Last updated

Holden 48-215
Holden 50-2106
1949 Holden 48-215 sedan 01.jpg
Overview
Manufacturer Holden
Also calledHolden, Holden FX (unofficial)
ProductionNovember 1948–September 1953
Assembly Pagewood, New South Wales [1]
Fortitude Valley, Queensland [1]
Birkenhead, South Australia [1]
Mosman Park, Western Australia [1]
Woodville, South Australia [1]
Fishermans Bend, Victoria
Designer Frank Mathwin
Body and chassis
Class Mid-size
Body style 4-door sedan (48-215)
2-door coupe utility (50-2106)
Layout Front-engine, rear-wheel drive
Powertrain
Engine 132 cu in (2,171 cc) GMH '132' I6
Transmission 3-speed manual
Dimensions
Wheelbase 103 in (2,620 mm)
Length172 in (4,370 mm)
Width66.9 in (1,699 mm)
Height61.8 in (1,570 mm)
Curb weight 2,230 lb (1,010 kg)
Chronology
Successor Holden FJ

The Holden 48-215 is a mid-size sedan which was produced by the Australian automaker Holden between November 1948 and October 1953. A coupe utility derivative, coded as the 50-2106 and marketed as the Holden Coupe Utility, was produced from January 1951. The name reflects the year of introduction ('48) and the size of the engine, at 2.15 liters. [2]

Contents

The 48-215 was the first model from General Motors in Australia to bear the Holden name. [3] In mainstream parlance, the official name of "Holden 48-215" was eschewed in favour of the shortened "Holden" designation. Following the replacement of the first Holden, the 48-215 gained the unofficial nickname of Holden FX. This designation was first used in the Drawing Office at GM-H in 1952 as an unofficial means of distinguishing between early 48-215 vehicles with front suspension using lever-action shock absorbers, and those with the new telescopic shock absorber front suspension introduced in 1953 - the term "FX" was pencilled onto a parts list for the new suspension components. [4] The title "FX" later came into use in used car advertisements to describe models with the later suspension, first being used by Melbourne dealer Reg Smith Motors in two advertisements in the 10 February 1960 issue of The Age . [5] Use of the term "FX" gradually spread to cover all 48-215 and 50-2106 vehicles, although the term has never been used by Holden in any official manner.

The design was originally conceived in the United States by Chevrolet, [6] but was not used because it was deemed too small for the U.S. market as it developed after the war. Instead the design became the basis of only the 48-215 model. Its American origins are quite apparent, as it closely resembles Chevrolets of the period that did make it to production, particularly the Fleetline Aerosedan and the second generation Deluxe. Development of the 48-215 began in 1944.

Five prototypes

Holden 48-215 sedan 1951 Holden 48-215 (FX) sedan (6102032141).jpg
Holden 48-215 sedan

Three prototypes were built by hand in 1946 by American and Australian engineers at the General Motors workshop in Detroit. Months of durability and performance testing were undergone in the US before the three prototypes were shipped to Australia. Prototype number one was first registered (as a Chevrolet) in Victoria as JP-480 on 12 February 1947. [7] It survives as part of the National Museum of Australia collection. Prototypes two and three were registered at the same time as JP-481 and JP-482.

A further two prototypes were built in Australia; the first was registered as KJ-400. Owned by Australian businessman Peter Briggs between 1980 and 2013, the car's value was estimated to be worth over A$1 million when it was put up for auction in the Motorclassica auction Melbourne, in October 2013. [8] The second Australian-built prototype was registered as KY-442. All five prototypes were registered as Chevrolets.

Only two were used for photographic purposes. They were: [7]

In the absence of an established supplier base in Australia for auto-making, new forging facilities had to be set up for producing crankshafts and a new foundry was set up for major castings. [9] In order to hasten the project to production some simplifications were incorporated. [9] There were no direction indicators, there was no provision for heating or demisting, and at the rear there was only a single, centrally positioned, tail lamp. [9] Because of the mild climate in most of the populated areas of the country, it was found possible to save weight and cost by using a relatively small 6-volt 11-plate battery. [9] Interior trim was minimised: weight reduction was pursued "with great vigour" and, in view of the 2,247 lb (1,019 kg) weight in "running trim", a success. [9]

Ten pilot cars

1948 timeline

Production overview

All four Holden colours were represented: [7]

Pilot car No.ColourSerial No.Engine No.Registration No.
1Gawler Cream (Body No. six)8-1001-M1001MG-501
2Black8-1002-M1002MG-502
3Black8-1003-M1003MG-503
4Black8-1004-M1004MG-504
5Black8-1005-M1005MG-505
6Seine Blue8-1006-M1006MG-506
7Convoy Grey8-1007-M1007MG-507
8Black8-1008-M1008MG-508
9Black8-1009-M1009MG-509
10Black8-1010-M1010MG-510

These ten cars were used for testing. Three of them went to the Engineering Department, five went to Manufacturing, one went to the General Sales Manager, and one went to the managing director, H.E. Bettle. [7]

Volume production

When all departments were satisfied with the car, volume production began. The race was now on to ensure Holden dealers in all states had cars on their showroom floors before unveiling day. Black bodies dominated the early roll-out but GMH made sure that each capital city also received examples of cream, blue, and grey. Ultimately, 68 Holdens were distributed to the capital cities before unveiling day. [10]

On Sunday, 21 November, an Open Day was held to exhibit the entire factory (including the high-security design rooms) and the car itself. But this special preview was not for the public or the dealers—it was for the Fishermans Bend employees and their families (GMH estimated that 12,000 guests attended). There were partly assembled cars at various stages along the assembly line as well as finished cars for the guests to inspect. [10]

The official launch for Victorian dealers was held at the Oriental Hotel in Melbourne on Friday, 26 November. [10]

Unveiling

Ben Chifley at the launching of the Holden 48-215 on 29 November 1948. NAA A1200 L84254 Ben Chifley at the launching of the first mass-produced Australian car 1948.jpg
Ben Chifley at the launching of the Holden 48-215 on 29 November 1948.

The official unveiling by Prime Minister Ben Chifley commenced at 2:30 pm on Monday, 29 November 1948, in the Fishermans Bend Social Hall. The 400 guests applauded when silver curtains parted to reveal a cream Holden, in a black velvet setting and sparkling under spotlights, as an orchestra played Brahms' Waltz in A-flat. The celebrations at the plant were attended by 1,200 official guests. [10] The Holden was released for sale to the public at Port Melbourne, Victoria. The car was marketed simply as the Holden, without a model name. [11] It had a 132.5 cu in (2,171 cc) cast-iron straight six engine which produced 60 hp (45 kW), connected to a three-speed manual transmission. It managed the 0–60 mph (0–97 km/h) sprint in 18.7 or 27.7 seconds. [6] [12] Sources differ. It also had a dust proof body, and a small 37 ft (11.3 m) turning circle. [12] [13]

The 50-2106 coupe utility, based on the 48-215 sedan, was released in January 1951 [14] and in July 1953 the Holden "Business Sedan", essentially a taxi version of the 48-215, was added to the range. [15] Originally referred to as the 48-215-257, the Business Sedan was renamed 48-217. [16] The 48-215 and 50-2106 models were replaced by the Holden FJ series in 1953. [17]

Related Research Articles

<span class="mw-page-title-main">Holden</span> Defunct Australian automobile manufacturer

Holden, formerly known as General Motors-Holden, was an Australian subsidiary company of General Motors. Founded in Adelaide, South Australia, it was an automobile manufacturer, importer, and exporter that sold cars under its own marque in Australia. In its last three years, it switched entirely to importing cars. It was headquartered in Port Melbourne, with major industrial operations in the states of South Australia and Victoria. The 164-year-old company ceased trading at the end of 2020.

<span class="mw-page-title-main">Holden Monaro</span> Motor vehicle

The Holden Monaro is a car that was manufactured by General Motors' Australian division Holden. It has a front-engine, rear-wheel-drive layout and was produced with a two-door coupé body from 1968 to 1975 and again from 2001 to 2006 and with a 4-door sedan body from 1973 to 1977.

<span class="mw-page-title-main">Holden Special Vehicles</span> Division of Holden

Holden Special Vehicles (HSV) was the officially designated performance vehicle division for Holden. Established in 1987 and based in Clayton, Victoria, the privately owned company modified Holden models such as the standard wheelbase Commodore, long wheelbase Caprice and Statesman, and commercial Ute for domestic and export sale. HSV also modified other non-Holden cars within the General Motors lineup in low volumes.

<span class="mw-page-title-main">Holden Kingswood</span> Motor vehicle

The Holden Kingswood is a full-size car that was developed and manufactured in Australia by Holden, from the beginning of the HK series in 1968 through to the conclusion of the WB series in 1985. Prior to 1968, the full-size Holden range of family cars comprised the Holden Standard, the Holden Special, and Holden Premier models. Initially, the HK range of models included the basic Holden Belmont, the Kingswood, and the luxury-oriented Holden Premier, all of which were manufactured in a choice of sedan and station wagon bodies. Commercial variants were offered in three types: coupé utility, panel van, and later from 1971, a heavy-duty Holden One Tonner cab chassis. The utility (ute) version was originally marketed in both Belmont and Kingswood configurations. However, after the Belmont name was deleted from commercials at the end of HQ in late 1974, the base model commercials were sold only with the "Holden" badge.

<span class="mw-page-title-main">Ute (vehicle)</span> Short for "utility" vehicle

A ute, originally an abbreviation for "utility" or "coupé utility", is a term used in Australia and New Zealand to describe vehicles with a tonneau behind the passenger compartment, that can be driven with a regular driver's licence.

<span class="mw-page-title-main">Holden Commodore (VN)</span> Full-size car produced by Holden from 1988 to 1991

The Holden Commodore (VN) is a full-size car that was produced by Holden from 1988 to 1991. It was the first iteration of the second generation of this Australian made model, which was previously a mid-size car, as well as the first Commodore available as a coupé utility. The new range included the luxury variants, Holden Berlina (VN) and Holden Calais (VN) and, from 1990, introduced the commercial Holden Utility (VG).

<span class="mw-page-title-main">Holden (automobile)</span> Motor vehicle

The Holden was a full-sized car produced by the company of the same name across 5 generations from 1948 until 1984. The Holden is also commonly referred to by their model designation and also the H Series. The Holden was introduced to be Australia's car, being the first full scale produced automobile exclusive to the country. Prior to which, General Motors Holden's Ltd. assembled imported CKD kits from overseas General Motors subsidiaries such as Chevrolet, Buick, Vauxhall and more. And the only other cars built in the country being Ford and Chrysler vehicle bodies fitted to imported chassis. The Holden was an instant success among Australians, being the first production car built solely for Australia's unique, rough roads.

<span class="mw-page-title-main">Holden Special</span> Motor vehicle

The Holden Special is a mid-size car that was manufactured by Holden for Australasia. Introduced as the top-level trim in the new Holden FJ range of 1953, the Special was complemented by the entry-level Holden Standard and the mid-range Holden Business. The Business was in fact already available, introduced in July 1953 in the 48 series first seen in 1948. Three months later, the FJ was introduced, therefore forming a three-model lineup based around one car. A "Standard"-type variant also existed in the 48 series, but had been marketed simply as the "Holden".

<span class="mw-page-title-main">Pontiac G8</span> Motor vehicle

The Pontiac G8 is a full-size sedan which was produced by Holden in Australia for export to the United States, where it was sold by Pontiac. The G8, a rebadged Holden Commodore, was released in early 2008 for the 2008 model year in the United States, and in 2008 for the 2009 model year in Canada. Production stopped in mid-2009, following the GM decision to suspend the Pontiac brand. While available, the G8 took the place in the Pontiac lineup of both the Pontiac Bonneville, which ceased production after the 2005 model year, and the Pontiac Grand Prix, which ceased production after the 2008 model year.

<span class="mw-page-title-main">Holden Commodore (VX)</span> Motor vehicle

The Holden Commodore (VX) is a full-size car that was produced by Holden from 2000 to 2002. It was the second iteration of the third generation of the Commodore. Its range included the luxury variants, Holden Berlina (VX) and Holden Calais (VX), and it formed the basis for a new generation Holden Ute (VU) coupé utility and Holden Monaro (V2) coupé.

<span class="mw-page-title-main">Holden FJ</span> Motor vehicle

The Holden FJ series is a range of motor vehicles which was produced in Australia by Holden from 1953 until 1956. The FJ was the second model of an "all Australian car" manufactured by Holden and was based upon the established 48-215 series, commonly referred to as the "FX".

<span class="mw-page-title-main">Statesman (automobile)</span> Automotive marque created in 1971 by General Motors Holden

Statesman is an automotive marque created in 1971 by the Australian General Motors subsidiary, Holden. Statesman vehicles were sold through Holden dealerships, and were initially based on the mainstream Holden HQ station wagon platform, thereby providing more interior room and generally more luxurious features than their Holden-branded sedan siblings. Production ceased with the last of the WB series cars in January 1985.

<span class="mw-page-title-main">Holden HQ</span> Motor vehicle

The Holden HQ series is a range of automobiles that was produced by Holden in Australia from 1971 to 1974. The HQ was released on 15 July 1971, replacing the Holden HG series. It was the first ground-up redesign of the Holden line since its original release in 1948, and included an all-new body, chassis, and suspension. The HQ was later developed into a series of successor models, finally ending production when the WB series was discontinued in 1985.

<span class="mw-page-title-main">Vauxhall Wyvern</span> Motor vehicle

The Vauxhall Wyvern is a medium-sized family car introduced by Vauxhall in 1948 as a successor to the Vauxhall 12. The name comes from the mythical beast the wyvern, and may be due to a misidentification of the heraldic griffin on the Vauxhall badge.

<span class="mw-page-title-main">Holden HK</span> Motor vehicle

The Holden HK series is an automobile which was produced by Holden in Australia from 1968 to 1969. Introduced in January 1968, the HK range progressively replaced the Holden HR series which had been in production since 1966. HK models were both larger and heavier than their predecessors and the range would ultimately include thirteen different models against the eight of the HR range. The Holden HK was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names.

<span class="mw-page-title-main">Holden HD</span> Motor vehicle

The Holden HD series is a range of automobiles which were produced by Holden in Australia from 1965 to 1966.

<span class="mw-page-title-main">Holden HR</span> Motor vehicle

The Holden HR is an automobile that was produced by Holden in Australia from 1966 to 1968.

<span class="mw-page-title-main">Coupé utility</span> Automotive body style

A coupé utility is a vehicle with a passenger compartment at the front and an integrated cargo tray at the rear, with the front of the cargo bed doubling as the rear of the passenger compartment.

<span class="mw-page-title-main">Vauxhall 14-6</span> Motor vehicle

The Vauxhall 14-6 is an automobile produced by Vauxhall in the United Kingdom from 1939 until 1948.

The Holden Fishermans Bend Plant was an industrial park opened in 1936 in Fishermans Bend, Victoria, as Holden's headquarters. The new location was opened due to many issues with its previous City Road facility. The park was also intended to kickstart a Victorian leg of the General Motors subsidiaries Chevrolet and Vauxhall.

References

  1. 1 2 3 4 5 Ed's Eh Premier Build [ permanent dead link ]. Retrieved 23 August 2011
  2. "1949 Holden 48-215". Bunbury Motor Museum. Bunbury, WA.
  3. Davis, Tony; Kennedy, Alistair; Kennedy, Ewan (February 2007). "The Holden Heritage - 13th Edition (Part One)" (PDF). GM Holden. pp. 38–39. Archived from the original (PDF) on 26 September 2007.
  4. Bryce, Warwick. "The Real 'FX' Holden - Origin of the Nickname".
  5. "The Age". The Age. 10 February 1960. p. 34, column 5. Retrieved 17 February 2020 via Google_News_Archive.
  6. 1 2 Willson, Quentin (1995). The Ultimate Classic Car Book . DK Publishing, Inc. ISBN   0-7894-0159-2.
  7. 1 2 3 4 5 Magazine "Restored Cars Australia" Number 106 Sept-Oct 1994, Page 14, article "THE 48-215 HOLDEN PART ONE"
  8. Cockington, James (23 October 2013). "Australia's first Holden offered for sale at $1m". The Sydney Morning Herald. Archived from the original on 22 October 2013. Retrieved 6 December 2013.
  9. 1 2 3 4 5 "Holden Saloon (road test)". Autocar . 2 December 1948.
  10. 1 2 3 4 Magazine "Restored Cars Australia" Number 107 Nov-Dec 1994, Page 16, article "THE 48-215 HOLDEN PART TWO"
  11. Terry Bebbington & Michel A. Malk, 45 years of Holden, 1994, page 14
  12. 1 2 "Holden 48/215 FX Technical Specifications". Unique Cars & Parts. Retrieved 17 October 2011.
  13. Holden General Motors New Australian Car. Australia: General Motors. Retrieved 4 March 2019.
  14. The Holden Heritage, Eight Edition
  15. Tony Davis, Aussie Cars (1987), Page 64
  16. Loffler, Don (2010) [2002], The FJ Holden: a favourite Australian car (PDF) (Revised ed.), Kent Town, SA: Wakefield Press, p. 4, ISBN   9781862548916
  17. Darwin, Norm (2002), 100 Years of GM in Australia, H@nd Publishing, p. 225, ISBN   9780646414768