Indian locomotive class WDM-2G

Last updated
WDM-2G
Type and origin
Power typeDiesel-electric
Builder Patiala Locomotive Works, Patiala
Build date2013
Total produced2
Specifications
Configuration:
​
 •  UIC Co′Co′
 • Commonwealth Co-Co
Gauge 1,676 mm (5 ft 6 in)
Bogies ALCo high adhesion bogie
Wheel diameter1,092 mm (3 ft 7 in)
Axle load 19.5 t (21.5 short tons; 19.2 LT)
Loco weight117 t (129 short tons; 115 LT)
Fuel type Diesel
Prime mover 3 of Cummins QSK-19
Engine type3 engines; each of 4-Cycle 6-Cyl diesel engine
Aspiration Turbo-supercharged
Traction motors TM4907 DC traction motors (6; 3 on each bogie)
Cylinders 6 for each engine, 3 engines
Transmission Diesel-electric transmission
MU working possible
Loco brake Air, Dynamic brake, Parking brake
Train brakes Air (IRAB-1; Indian Railway Air Brake - 1)
Safety systemsVigilance Control device (VCD), emergency brake control valve, flasher (one both ends)
Performance figures
Maximum speed
  • mainline : 120 km/h (75 mph)
  • other : 105 km/h (65 mph)
Power output2,400 hp (1,800 kW)
Tractive effort 37.2 t (37,200 kg)
Factor of adh. 0.27
Brakeforce19 t (19,000 kg) for dynamic brakes
Career
Operators Indian Railways
Numbers80000 & 80001
Locale Western Railways
Delivered2013
First run2012
Dispositionactive
Sources: Speed certificate, final draft specifications

The WDM-2G is a class of diesel electric genset locomotive used in Indian Railways. It is one of the rarest locomotives in India with only two units being produced by Patiala Locomotive Works (PLW). The locomotives were produced with an intention of being fuel efficient and to be used for light to medium duties such as short passenger runs along with occasional shunting. They are one of the only two classes of locomotives in India to feature multiple prime movers, the other example being WDS-6G, which was designed solely for shunting. They have a rated power of 2,400  HP.

Contents

Development

Diesel locomotives had been the backbone of the Indian Railways. Within the diesel fleet, the ALCOs, WDM-2, later upgraded to WDM-3A and other variants, were, and to some extent even continue to be, the major workhorses. This was before the, relatively recent, push of the Railways for complete electrification of the network. Being the major user of diesel locomotives, naturally, a large chunk of railway money was spent to afford diesel fuel, of which the railways were the number one consumer. [1] Thus, with an aim to minimize pollution and fuel consumption, the development for WDM-2G, locos started. The specifications laid down by RDSO demanded the locomotive to be fuel efficient by using multiple engines (prime movers) which could be turned off or on depending on the load that the locomotive was pulling. [2]

It was planned that the initial two locomotives would be produced by Diesel-Loco Modernization Works, Patiala (DLMW) while the remaining units would be built at a factory in Sherpur of Sehore district. The factory was supposed to be a joint a venture between Daulat Ram Engineering Services, a railway component manufacturer, and US-based locomotive re-manufacturer National Railway Equipment Co. However, further reports about the plant have not been published and information has been scarce.

Performance and specifications

The WDM-2G are inspired by the hundreds of gensets in service over North America. Being the first locomotives to be built by Diesel-Loco Modernization Works, they have certain features which are not found on regular locomotives in Indian Railways such as extensive use of marker and indication lamps and a cab structure inspired by the ones found on American locomotives like EMD SD40-2. The locos, for the first time in India, featured a Nathan K5LA multi-chime horn, which proved to be a little quieter for Indian operations.

On the inside, the locomotive features 3 prime movers, each of Cummins QSK-19 type which is a 6 cylinder four stroke engine producing a power of 800 HP. The locomotive retained the ALCO high adhesion bogie from the WDM-2/3 locomotives but was moving by TM4907 for each axle which are a type of direct current traction motor. The locomotive has a weight of 117 tons distributed over 6 axles making an axle load of 19.5 tons/axle. The low weight limited the tractive effort to 37.2 tons force while allowing a speed up to 120kmph. Apart from that, the locomotives have dynamic braking, conventional braking and vigilance control device for driver alertness and safety. [3]

The major advantage of these locomotives operationally offer is the reduced fuel consumption and lower emission. They reportedly consume 20% lesser fuel than locomotives of same specifications and power in the Railways. This also means that the resultant nitrous oxides emission is lesser in these locos making them more environmentally friendly than the previous diesel locomotives of Indian Railways. [4]

Service and future

Two locomotives numbered 80000 and 80001 entered service in 2013 after RDSO oscillation trials which certified them to be fit for 120 kilometres per hour (75 mph) on mainline tracks and 105 kilometres per hour (65 mph) on regular tracks. [3] The locomotives were initially allocated to Itarsi (ET) loco shed of West Central Railway, however, in 2019, they were moved to Diesel loco shed Vatva (VTA) of Western Railway where they are currently used for shunting purposes.

Despite the initial fanfare within the media, the locomotive did not enter serial production for Indian Railways. The major reasons for its failure can be attributed to the fact that the requirement of low powered locomotives has become quite low due to the long and heavy trains run in the country, the exception being shunting duties, for which plenty locos are available. The chief reason why production was not continued was due to the persuasion of route electrification in Indian Railways. Due to this the Indian Railways was not very keen on adding a whole new fleet of diesel locomotives, which even after being fuel efficient for a diesel, were still inferior to the electric locomotives, both in efficiency and power.

Locomotive shed

The only two units ever built were allocated to Itarsi locomotive shed before being transferred to Vatva shed, Western Railway.

ZoneNameShed CodeQuantity
Western Railway SabarmatiSBI2
Total Locomotives Active as of April 2023 [5] 2

See also

Related Research Articles

Indian Railways operates India's railway system and comes under the purview of the Ministry of Railways of Government of India. As of 2023, it maintains over 108,706 km (67,547 mi) of tracks and operates over 13,000 trains daily with a fleet of 14,800 locomotives. The railways primarily operates a fleet of electric and diesel locomotives along with a few compressed natural gas (CNG) locomotives. Steam locomotives are operated on mountain railways and on heritage trains.

<span class="mw-page-title-main">Indian locomotive class WDM-2</span> Broad gauge Indian diesel-electric locomotive

The Indian locomotive class WDM-2 is a class of diesel-electric locomotive that was developed in 1962 by American Locomotive Company (ALCO) for Indian Railways. The model name stands for broad gauge (W), Diesel (D), Mixed traffic (M) engine, 2nd generation (2). They entered service in 1962. A total of more than 2,700 WDM-2 was built at ALCO and Banaras Locomotive Works, Varanasi between 1962 and 1998, which made them the most numerous class of mainline diesel locomotive until its successor the WDM-3A.

<span class="mw-page-title-main">Indian locomotive class WAM-4</span> Indian Railway class electric locomotive

The Indian locomotive class WAM-4 is a class of 25 kV AC electric locomotives that was developed in 1970 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), alternating current (A), mixed traffic (M) locomotive, 4th generation (4). They entered service in March 1971. A total of 500 WAM-4 were built at CLW between 1970 and 1983, which made them the most numerous class of mainline electric locomotive till its successor the WAG-5.

<span class="mw-page-title-main">Indian locomotive class WDP-4</span> Indian Railways passenger class diesel locomotive

The Indian locomotive class WDP-4 is a passenger-hauling diesel-electric locomotive with AC electric transmission designed by General Motors Electro-Motive Division and built by both GM-EMD and under license by Banaras Locomotive Works (BLW) of Varanasi, India for Indian Railways as the classes WDP4, WDP4B and WDP4D. The GT46PAC is a passenger version of the previous Indian Railways EMD GT46MAC freight locomotive. The locomotive has a 16-cylinder 710G3B diesel engine and is one of the fastest diesel-electric locomotives in service in Indian Railways.

The ALCO DL560C is a series of diesel-electric locomotive with AC electric transmission designed by the American Locomotive Company and produced under license by Banaras Locomotive Works (BLW) Varanasi, India for Indian Railways as their classes WDM-2, WDM-3A/2C, WDM-3D and WDG-3A for operation in India. The locomotive is fitted with a 16-cylinder ALCO 251 B, C diesel engine. In the early 1960s Indian Railways needed a reliable diesel workhorse to gradually replace its steam locomotive fleet. Equal numbers of ALCO's DL560C and EMD's G16 were chosen for trials. More locomotives of each of these were purchased for more trials. Indian Railways was keen on producing these locomotives in the country rather than depending on imports. EMD did not agree for a Transfer-of-Technology, while ALCO did. Thus ALCO DL560C was chosen for the job due to its easy maintenance, reliability and simple operation. And from then on vast numbers of this loco in different configurations have been produced and remain the main diesel traction power of Indian Railways.

<span class="mw-page-title-main">Indian locomotive class WDM-3A</span> Class of diesel–electric locomotive

The Indian locomotive class WDM-3A is a class of diesel–electric locomotive that was developed in 1993 by Banaras Locomotive Works (BLW), Varanasi for Indian Railways. The model name stands for broad gauge (W), Diesel (D), Mixed traffic (M) engine, with 3300 horsepower (3A). The WDM-3A is a later classification of earlier WDM-2C. They entered service in 1994. A total of 143+ were built at ALCO and Banaras Locomotive Works between 1994 and 2003 with rest of the 1246 units being rebuilt from WDM-2 which made them the most numerous class of mainline diesel locomotive until the WDG-4.

<span class="mw-page-title-main">Indian locomotive class YDM-4</span> Class of Indian diesel-electric locomotive

The YDM-4 is a class of diesel locomotives operating on Indian Railways. The first units were built by the American Locomotive Company (Alco) in 1961. Since 1968, members of the class have been manufactured in India by the Banaras Locomotive Works (BLW), Varanasi. The model name stands for metre gauge (Y), diesel (D), mixed traffic (M) engine. The YDM-4 has been the most successful metre gauge diesel locomotive in India. The YDM-4 locos have a maximum speed of 100 km/h (62 mph), restricted to 85 km/h (53 mph).

<span class="mw-page-title-main">Diesel Loco Shed, Vatva</span> Loco shed in Gujarat, India

Diesel Loco Shed, Vatva is an engine shed located in Vatva, Gujarat in India. It is located north-east of Vatva falling under Ahmedabad railway division. The shed caters to the need of freight as well as passenger trains.

<span class="mw-page-title-main">Diesel Loco Shed, Sabarmati</span> Loco shed in Gujarat, India

Diesel Loco Shed, Sabarmati is an locomotive maintenance shed located in Sabarmati, Ahmedabad, Gujarat in India. It is located east of Sabarmati falling under Ahmedabad railway division. The shed caters to the needs of freight as well as passenger trains.

<span class="mw-page-title-main">Indian locomotive class WDG-4G</span> Broad-gauge freight-hauling diesel-electric locomotive class of Indian Railways

The Indian locomotive class WDG-4G is a class of dual-cabin freight-hauling diesel-electric locomotive used by the Indian Railways (IR). The locomotive is designed by GE Transportation and is based on its Evolution Series, which are used in North America. The class is meant for freight hauling and replaces the older American Locomotive Company (ALCO)-designed locomotives, which have been the mainstay diesels of Indian Railways since 1962. Equipped with a 12-cylinder fully turbocharged GEVO engine, it is claimed to be 50% more environmentally friendly than its predecessors and is the first in the country to be compliant with level one of the emission norms set by the International Union of Railways (UIC-1). The locomotive has two cabs for easy reversal, both of which are air conditioned.

<span class="mw-page-title-main">Indian locomotive class WDM-3D</span> Indian Railway class diesel locomotive

The Indian locomotive class WDM-3D is a class of diesel-electric locomotive that was developed in 2003 by Banaras Locomotive Works (BLW), Varanasi for Indian Railways. The model name stands for broad gauge (W), Diesel (D), Mixed traffic (M) engine with 3300 horsepower (3D). The engine is classified WDM-3D though it outputs only 3300 hp and not 3400 hp as the name should suggest. They entered service in 2003. A total of 590+ WDM-3D were built at Banaras Locomotive Works (BLW), Varanasi between 2003 and 2016.

<span class="mw-page-title-main">Indian locomotive class WDP-1</span>

The Indian locomotive class WDP-1 is a class of diesel-electric locomotive that was developed in 1995 by Banaras Locomotive Works (BLW) for Indian Railways. The model name stands for broad gauge (W), Diesel (D), Passenger traffic (P) engine, 1st generation (1). They entered service in 1995. A total of 69 WDP-1 units were built at Banaras Locomotive Works (BLW), Varanasi between 1995 and 1999.

<span class="mw-page-title-main">Indian locomotive class WDM-7</span>

The WDM-7 is a diesel-electric locomotive of Indian Railways. It has been manufactured by Banaras Locomotive Works (BLW), Varanasi. The model name stands for broad gauge (W), diesel (D), mixed traffic (M) engine. Today, these are found exclusively at Chennai Central and nearby area.

<span class="mw-page-title-main">Indian locomotive class WDG-2/3A</span> Indian Railway freight class diesel locomotive

The Indian locomotive class WDG-3A is a class of diesel-electric locomotive that was developed in 1994 by Banaras Locomotive Works (BLW),Varanasi for Indian Railways. The model name stands for broad-gauge (W), Diesel (D), Goods traffic (G) engine, 3,100 hp (3A) locomotive. They entered service on 18 July 1995. A total of 1,164 WDG-3A units were built between 1994 and 2015 at BLW, Varanasi with a few units being produced by Diesel Loco Modernisation Works (DLMW) and Parel Workshop.

<span class="mw-page-title-main">Indian locomotive class WDS-6</span> Indian Railway shunter class diesel locomotive

The Indian locomotive class WDS-6 is a diesel-electric locomotive used by the Indian Railways mainly for shunting and also for performing departmental duties. The model name stands for broad gauge (W), Diesel (D), Shunting (S) engine, 6th generation (6). As of April 2022, 375 units of this class are currently in use all over India.

The Indian locomotive class WDM-3 was a type of diesel-hydraulic locomotive that was developed by Henschel for Indian Railways in 1962. The model name "WDM-3" stood for broad gauge (W), Diesel (D), Mixed traffic (M) engine, 3rd generation (3). These locomotives were put into service between 1970 and 1971, and a total of eight were built between 1962 and 1970. However, they were decommissioned at Gooty in 1995 and are now retired from service.

<span class="mw-page-title-main">Indian locomotive class YDM-5</span>

The Indian locomotive class YDM-5 is a class of diesel-electric locomotive that was developed in 1964 by General Motors (GM-EMD) for Indian Railways. The model name stands for Metre gauge (Y), Diesel (D), Mixed traffic (M) engine, 5th generation (5). They entered service in 1964. A total of 25 YDM-5 locomotives was built between 1963 and 1964.

The Indian locomotive class YDM-3 is a class of diesel-electric locomotive that was developed in 1964 by GM-EMD for Indian Railways. The model name stands for Metre gauge (Y), Diesel (D), Mixed traffic (M) engine, 3rd generation (3). They entered service in 1962. A total of 30 YDM-3 locomotives was built between 1961 and 1962.

<span class="mw-page-title-main">Diesel Loco Shed, Tondiarpet</span> Loco shed in Tamilnadu, India

Diesel Loco Shed, Tondiarpet is a motive power depot performing locomotive maintenance and repair facility for diesel locomotives of the Indian Railways. It is located near Tondiarpet railway station (TNP) of the Southern Railway zone in the city of Chennai, Tamil Nadu and is one of the four diesel loco sheds of the Southern Railway, the others being at Ernakulam (ERS) at Kochi, Erode (ED) and Golden Rock (GOC) at Trichy.

The class WDS-3 was a diesel-hydraulic locomotive used by Indian Railways for shunting and doing departmental work. The model name stands for broad gauge (W), diesel (D), shunting (S) 3rd generation (3). The WDS-3 is used mostly in the Northern Railway Zone (NR). All these locomotives were withdrawn and scrapped by the late 1990s.

References

Notes

  1. ↑ Das, Mamuni (21 August 2013). "Railways to introduce fuel-efficient multi-genset locomotives". @businessline. Retrieved 2020-05-26.
  2. ↑ RDSO specifications for genset locomotive (PDF). RDSO.
  3. 1 2 RDSO speed certificate for WDM-2G (PDF). RDSO.
  4. ↑ "Railways introduce fuel-efficient multi-genset locomotives". Firstpost. 21 August 2013. Retrieved 2020-05-26.
  5. ↑ "IRFCA".

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.