WAP-4 | |||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
|
The Indian locomotive class WAP-4 is a class of 25 kV AC electric locomotives that was developed in 1993 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Passenger traffic (P) locomotive, 4th generation (4). They entered service in late 1994. A total of 778 WAP-4 were built at CLW between 1993 and 2015, which made them the most numerous class of mainline electric passenger locomotive until the WAP-7.
The WAP-4 is one of the most successful locomotives of Indian Railways[ peacock prose ] serving passenger trains for over 29 years. This class provided the basic design for other locomotives like the WAP-6. Despite the introduction of more modern types of locomotives like WAP-7, a significant number are still in use, both in mainline duties. Production of this class was halted in December 2015 with locomotive number 25051 being the last unit to be rolled out.
As of September 2022, all locomotives except those lost in accidents still retain "operational status" on the mainline as WAP-4, with further examples having been converted from WAP-6.
The WAP-4 class was developed after its predecessor, the WAP-1, was found inadequate to haul the longer, heavier express trains (24-26 coaches) that were becoming the mainstay of the Indian Railways network. IR/RDSO had realized that the reason for the WAP-1’s performance problems were the low-powered 770 hp Alstom TAO 659 traction motors. These were previously used with for the WAM-4 and WAG-5 classes but were too underpowered for modern requirements. At that time, new 840 hp Hitachi 15250 traction motors which had been adopted for use on newer WAG-5s was showing promise. So, these traction motors were adopted on to WAP-1s Flex-icoil Mark I fabricated bogies, and with a new indigenously designed 5400 kVA transformer and silicon rectifiers. [1]
It also was among the first locomotives to get a microprocessor-based control and fault diagnostics system. To accommodate the heavier Hitachi motors without increasing its 112t overall weight, the WAP-4 was made substantially lighter by the widespread use of aluminum materials in construction. The underframe of WAP-4 is narrower and lighter and also completely different from that of the WAP-1 to enable it to handle higher loads. [2] [ page needed ] [3] [ page needed ]
The loco has a streamlined twin cab carbody design, with top-mounted headlamps. The first 150 or so units had the headlamp mounted at waist level, with the lights being mounted in a protruding nacelle. Later on the headlamps were placed in a recessed nacelle, and from road # 22573 onward, the headlamps were moved to the top. Newer locos also feature larger windshields, more spacious driver cabin with bucket type seats and ergonomic controls. The control panel also features a mix of digital and analog displays in newer units (all analog display in older versions). [4] [ page needed ]
The first WAP-4 unit, #22201 rolled out from CLW on April 25, 1994. They looked exactly like the WAP-1, even sporting the same livery. From 2000, newer versions with many WAP-5 design cues like square type windscreens ,twin-beam headlights, speed recorders and some changes to the control electronics had been rolled out recently.[ citation needed ]
However, in the face of the advent of three-phase AC traction motors, IGBT-controlled AC drives, and full computer controls, the DC traction motors was getting increasingly outdated. As a result, after over 20 years, production of the WAP-4 locomotives ceased on November 1, 2015, with the 776th unit, #25051, being rolled out. [5] [ page needed ]
The WAP-4s were developed at the same time IR gave procurement orders for WAP-5 locomotives, as they were meant for more general duties of hauling 24-coach expresses while WAP-5 were specially meant for high-speed operations.[ citation needed ]
Recently[ when? ] as per directive received from Railway Board,[ which? ] all the loco sheds holding WAP-4 type locomotives have started multiple unit (MU) operations. This configuration of MU-fitted WAP-4 locos are being used to haul medium tonnage faster freight trains across IR. The different locomotive sheds of WAP-4 are Arakkonam, Santragachi, Erode, Mughalsarai, Howrah and Bhusaval. [6]
All WAP-4s are painted in the same red-black with a yellow/cream band livery, though the shade of the red will differ from shed to shed, from the blazing crimson red of Santragachi SRC/SER to the orange of Erode ED/SR.BZA/SCR painted with navy blue livery recently
Zone | Shed Name | Code | Quantity |
---|---|---|---|
Central Railway | Bhusaval | BSLL | 71 |
Eastern Railway | Howrah | HWHE | 42 |
HWHD | 39 | ||
East Central Railway | Pt. Deen Dayal Upadhyaya | DDUE | 41 |
Samastipur | SPJD | 43 | |
Northern Railway | Tughlakabad | TKDD | 47 |
Alambagh | AMVD | 2 | |
North Central Railway | Jhansi | JHSE | 38 |
North Eastern Railway | Gorakhpur | GKPL | 42 |
Izzatnagar | IZND | 45 | |
Southern Railway | Arakkonam | AJJE | 98 |
Erode | EDE | 30 | |
Erode | EDDX | 41 | |
South Central Railway | Vijayawada | BZAE | 63 |
South Eastern Railway | Santragachi | SRCE | 60 |
Western Railway | Valsad | BLEE | 21 |
Vatva | VTAD | 40 | |
Ratlam | RTMD | 10 | |
Total locomotives active as of November 2024 [7] | 773 |
The Indian locomotive class WAG-9 is a class of 25 kV AC electric locomotives that was developed in 1995 by ABB for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G), 9th generation (9) locomotive. They entered service in 1996. A total of 5140 WAG-9 have been built at Chittaranjan Locomotive Works (CLW), with more units being built at Banaras Locomotive Works (BLW), Bharat Heavy Electricals Limited (BHEL) and Patiala Locomotive Works (PLW). It was the most powerful freight locomotive in the Indian Railways fleet until the introduction of the WAG-12.
The Indian locomotive class WAG-7 is a class of 25 kV AC electric locomotives that was developed in 1990 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), alternating current (A), goods traffic (G) engine, 7th generation (7). They entered service in 1992. A total of 1974 WAG-7 were built at CLW and BHEL between 1990 and 2015 by CLW and 2009 and 2023 by BHEL which made them the most numerous class of mainline electric locomotive till its successor the WAG-9.
The Indian locomotive class WAG-5 is a class of 25 kV AC electric locomotives that was developed in 1978 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), alternating current (A), goods traffic (G) engine, 5th generation (5). They entered service in 1980. A total of 1196 WAG-5 were built at CLW and BHEL between 1978 and 1998, which made them the most numerous class of mainline electric locomotive until the introduction of its successor, the WAG-7.
The Indian locomotive class WAM-4 is a class of 25 kV AC electric locomotives that was developed in 1970 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), alternating current (A), mixed traffic (M) locomotive, 4th generation (4). They entered service in March 1971. A total of 500 WAM-4 were built at CLW between 1970 and 1983, which made them the most numerous class of mainline electric locomotive till its successor the WAG-5.
The Indian locomotive class WDP-4 is a passenger-hauling diesel–electric locomotive with AC electric transmission designed by General Motors Electro-Motive Division and built by both GM-EMD and under license by Banaras Locomotive Works (BLW) of Varanasi, India for Indian Railways as the classes WDP4, WDP4B and WDP4D. The GT46PAC is a passenger version of the previous Indian Railways EMD GT46MAC freight locomotive. The locomotive has a 16-cylinder 710G3B diesel engine and is one of the fastest diesel–electric locomotives in service in Indian Railways.
The Indian locomotive class WCAM-1 was a class of dual-voltage electric locomotives that was developed in 1973 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), DC Current (C), AC Current (A), Mixed traffic (M) locomotive, 1st generation (1). They entered service in March 1973. A total of 53 WCAM-1 were built at CLW between 1973 and 1979, which made them the most numerous class of mainline dual-power AC-DC electric locomotive.
The Indian locomotive class WCAM-2 is a class of dual-power AC/DC series electric locomotives that was developed in 1995 by Bharat Heavy Electricals Limited used in the Indian Railways system. They are the second locomotive from the WCAM class. The model name stands for broad gauge (W), DC Current (C), AC Current (A), Mixed traffic (M) locomotive, 2nd generation (2). They entered service in 1995. A total of 20 WCAM-2 were built at BHEL between 1995 and 1996, which made them the most numerous class of mainline dual-power AC-DC electric locomotive. They use the same motors as WCAM 1 but with different circuitry and gearing. They are operational in routes around Mumbai. MU operation was possible with 3 units. WCAM-2P was the passenger-oriented version of the WCAM-2 class. However, they perform better than the WCAM 1 series.
The Indian locomotive class WDM-3A is a class of diesel–electric locomotive that was developed in 1993 by Banaras Locomotive Works (BLW), Varanasi for Indian Railways. The model name stands for broad gauge (W), Diesel (D), Mixed traffic (M) engine, with 3300 horsepower (3A). The WDM-3A is a later classification of earlier WDM-2C. They entered service in 1994. A total of 143+ were built at ALCO and Banaras Locomotive Works between 1994 and 2003 with rest of the 1246 units being rebuilt from WDM-2 which made them the most numerous class of mainline diesel locomotive until the WDG-4.
The Indian locomotive class WAG-12B is a class of 25 kV AC electric locomotives that was developed in 2017 by Alstom with technological collaboration with Indian Railways. The model name stands for wide gauge (W), alternating current (A), goods traffic (G) locomotive-12. They entered trial service in 2019. A total of 480 WAG-12B have been built at Electric Locomotive Factory, Madhepura, Bihar, India.
The Indian locomotive class WCAM–3 is a class of dual-power AC/DC series electric locomotives That was developed in 1997 by Bharat Heavy Electricals Limited used in the Indian Railways system. They are the third locomotives from the WCAM class. The model name stands for broad gauge (W), DC Current (C), AC Current (A), Mixed traffic (M) locomotive, 3rd generation (3). They entered service in 1997. A total of 53 WCAM-3 were built at BHEL between 1997 and 1998, which made them the most numerous class of mainline dual-power AC-DC electric locomotive. They were specifically designed for use by Central Railways in the Ghat section towards Nashik and Pune.
The Indian locomotive class WAP-1 was a class of 25 kV AC electric locomotives that was developed in 1980 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Passenger traffic (P) locomotive, 1st generation (1). They entered service in late 1981. A total of 65 WAP-1 were built at CLW between 1980 and 1996, which made them the most numerous class of mainline electric passenger locomotive until its successor, the WAP-4.
The Indian locomotive class WDG-3A is a class of diesel–electric locomotive that was developed in 1994 by Banaras Locomotive Works (BLW),Varanasi for Indian Railways. The model name stands for broad-gauge (W), Diesel (D), Goods traffic (G) engine, 3,100 hp (3A) locomotive. They entered service on 18 July 1995. A total of 1,164 WDG-3A units were built between 1994 and 2015 at BLW, Varanasi with a few units being produced by Diesel Loco Modernisation Works (DLMW) and Parel Workshop.
The Indian locomotive class WCG-2 is a class of 1.5 kV DC electric locomotives that was developed in the late 1960s by Research Design and Standards Organisation (RDSO) and Chittaranjan Locomotive Works (CLW) for Indian Railways. The model name stands for broad gauge (W), DC Current (C), Goods traffic (G) engine, 2nd generation (2). They entered service in February 1971. A total of 57 WCG-2 were built at CLW between 1978 and 1983, which made them the most numerous class of DC electric locomotive.
The Indian locomotive classes WAM-2 and WAM-3 were 25 kV AC electric locomotives that were imported from Japan in the 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Mixed traffic (M) locomotive, 2nd generation (2). A total of 38 WAM-2/3 locomotives were built by the Japanese Group between 1960 and 1964. They entered service in 1960.
The Indian locomotive class WCAG–1 is a class of dual-power AC/DC series locomotives used in the Indian Railways system. They are the only class of the WCAG locomotives. They were specifically designed for use by Central Railways in the Ghat section towards Nashik and Pune.
The Indian locomotive class WAG-1 was a class of 25 kV AC electric locomotives that was imported from Europe in the 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G) locomotive, 1st generation (1). A total of 112 WAG-1 were built by The European Group 50 Hz Group/European Group/50 Cycles Group (consortium) between 1963 and 1966. They entered service in 1964.
The Indian locomotive class WAG-3 was a class of 25 kV AC electric locomotives that was imported from Europe in the mid 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G) engine, 3rd (3). A total of 10 WAG-3 locomotives were built by The European Group 50 Hz Group/European Group/50 Cycles Group (consortium) in 1965, and entering service in the same year.
The Indian locomotive class WAG-4 is a class of 25 kV AC electric locomotives that was manufactured by CLW in the late 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G) engine, 1st (1). A total of 186 WAG-4 locomotives were built by The European Group 50 Hz Group/European Group/50 Cycles Group (consortium) between 1967 and 1969. They entered service in 1967.
The Indian locomotive class WAP-3 was a class of 25 kV AC electric locomotives that was designed by Research Design and Standards Organisation (RDSO) and Chittaranjan Locomotive Works (CLW) for Indian Railways in 1987. The model name stands for Broad gauge (W), AC Current (A), Passenger traffic (P) locomotive, 3rd generation (3). They entered service in 1988. They were the faster variant of the previous WAP-1 class. A total of 9 WAP-3 were converted from existing WAP-1 units at CLW between 1987 and 1988, but were later reverted back to WAP-1 specifications.
Electric Loco Shed, Asansol is a motive power depot performing locomotive maintenance and repair facility for electric locomotives of the Indian Railways, located at Asansol of the Eastern Railway zone in West Bengal, India. It is one of the two electric locomotive sheds of the Eastern Railway, the others being at Howrah (HWH). As of November,2022, there are 142 locomotives in the shed.