Kirk Mill

Last updated

Kirk Mill
Delivery of wood, Kirk Mills - geograph.org.uk - 934071.jpg
Kirk Mills wood delivery
Location map United Kingdom Borough of Ribble Valley.svg
Red pog.svg
Location map United Kingdom Forest of Bowland.svg
Red pog.svg
Location in Forest of Bowland
Cotton
Alternative namesBerry's furniture mill
Chipping chair works
Arkwright-type mill
Architectural styleStone built three storey
Structural systemStone
Location Chipping, Lancashire, England
Coordinates 53°53′12″N2°34′43″W / 53.8868°N 2.5785°W / 53.8868; -2.5785
Construction
Completed1785
Floor count3
Water Power
Diameter / width of water wheel32 ft / 5 ft
Doublers1
Other EquipmentThrostles
Listed Building – Grade II
Official nameKirk Mill and its associated mill ponds retaining walls, outflow and stone-built leat
Designated13 May 2011
Reference no. 1401593

Kirk Mill is an early example of an Arkwright-type cotton mill and a grade II listed building in Chipping, Lancashire. Built in the 1780s on the site of a corn mill dating back to at least 1544, it operated as a cotton mill with water frames and then throstles until 1886 when it was sold and repurposed as H.J. Berry's chairmaking factory, powered by a 32 ft (9.8 m) waterwheel, which continued in use, generating electricity until the 1940s.

Contents

Historian Chris Aspin described the historical significance of Kirk Mill, stating, 'To anyone interested in the Lancashire cotton trade, the survival at Chipping of one of the world's first factories is a matter of no little wonder.' [1]

Chipping thrived during the Industrial Revolution when there were seven mills located along Chipping Brook. The last survivor was Kirk Mill, then operating as the chairmaking factory of H.J. Berry. However, in 2010, the company went into administration, the factory closed, [2] and on 7 March 2011, the works were bought by SCPi Bowland Ltd. [3]

Significant refurbishment works including a full re-roof, stone cleaning, re-pointing with lime mortar, removal of incongruous late additions and the introduction of structural steelwork were completed in spring 2017.

Location

Kirk Mill, its 1-acre mill pond behind an embankment, the mill masters mansion Kirk House, the mill manager's house Grove Cottage and the 1823 workhouse are clustered together on the Chipping Brook, a few hundred yards from Chipping Church. [4]

History

The original corn mill built on this site was operating in 1544. On the 2 February 1785, Richard Dilworth passed the corn mill to Richard Salisbury of Chipping a cotton manufacturer and William Barrow a merchant of Lancaster, the new mill was functioning by July. On 15 April 1788 the site was offered for sale, and in the advertisement details of its size and equipment were given. The advertised mill, described as 23 by 9 yards, featured a water-wheel of 19.5 by 5.5 feet and was claimed to be in full working condition. It housed 20 spinning frames with 1,032 spindles in operation and had provisions for six additional frames with 48 spindles each. Surrounding facilities included a smithy, barn, three inhabited cottages, one near completion, and four cottages built to the first floor. [5]

Kirk Mill was auctioned again on 25 June 1789 at Preston. The high-bidder was Ellis Houlgrave (1759-1793), the Liverpool-born (later London) clock and watchmaker. [6] On 25 March 1790, Houlgrave insured the mill with the Sun Fire Office for £400, covering the contents for an additional £600. [7] An advertisement in the Manchester Mercury of 6 April 1790, sought ‘about forty hands to work at the branches of carding, roving, spinning, and reeling’. [8] While Houlgrave held the official titles of proprietor and occupier, his father-in-law, the inventor and cotton machinery manufacturer Peter Atherton appears to have played a role in financing and equipping the mill. [9]

The water wheel at Kirk Mill was served by two streams, Chipping (formerly Wolfhouse) Brook [10] and Garstang (now Dobson’s) Brook; [11] however, even this proved insufficient. On 24 June 1792, Houlgrave entered into an agreement with Thomas Weld, owner of the Bowland-with-Leagram and Stonyhurst estates, to dam a third stream (Leagram Brook) and construct a weir and channel. This would divert water from Leagram Brook through one of Weld’s ditches into Dobson’s Brook and then to Kirk Mill. The agreement included the construction of a new corn mill in Chipping. The original corn mill depended on Leagram Brook, which had been damned to redirect water to Kirk Mill. Consequently, after supplying additional power to Kirk Mill, the water then proceeded to a newly established corn mill situated at the edge of the village. It is notable that Houlgrave’s additional water source was located more than a mile from his water wheel at Kirk Mill. [12]

With Houlgrave in failing health, ownership of Kirk Mill passed to his father-in-law Peter Atherton. Short-lived agreements formalised in January 1793 between Atherton and various partners were ultimately superseded by the announcement that from 17 May 1793, Kirk Mill would be carried on by Peter Atherton,William Harrison, and John Rose of Chipping. [13]

Atherton and his partners extended Kirk Mill and turned their attention higher up the valley to Saunder Rake, where they planned a mule mill along with a residence for 150 apprentices. [14] On 11 December 1795, Atherton, Rose, and Harrison insured Kirk Mill. The policy indicated significant business growth since Houlgrave’s insurance more than five and a half years earlier. Although the building figure remained at £400, the millwright’s work and machinery increased from £600 to £4000. Stock was insured for £300. In neighbouring Grove Square, the partners constructed a new building, consisting of stables on the ground floor and a warehouse and reeling rooms above. [15] Grove House was built in the 1790s.

According to the London Gazette , the partnership between Atherton, Harrison, and Rose at Chipping was dissolved on 24 December 1796, and the succeeding partnership between Atherton and Harrison on 11 September 1797. This left Atherton as the sole owner of Kirk Mill until his death in 1799. [16]

It was sold again in 1802, and by then it also housed a 336 spindle mule and an outbuilding suitable for 3 further mules. Mules were more suitable to spinning the softer weft, while water frames of throstles produced a harder twist more suitable for the warp or sewing cotton. An adjoined house that was described as a residence for a genteel family, a further cottage was used as an apprentice house. It is probable that alterations that lengthened the mill were made then. In 1823 Grove Row was constructed as a workhouse, it closed in 1838 and was converted into 5 cottages. One of these cottages served as a shop until 1949. [17] In 1881 the census shows that 10 men, 7 boys and 24 women were employed in the mill. [17]

The cotton mill closed in 1886, and it was acquired by furniture manufacturers. The water wheel stopped being the prime mover in 1923 but drove an electricity generator proving power and light to adjoining houses. Electricity didn't reach the rest of Chipping until 1933. The wheel stopped turning in about 1940, and the top part was cut away to release more space to the mill. [17]

H.J. Berry into administration in 2010, the chair making factory closed. [2] On 7 March 2011 the works were bought by SCPi Bowland Ltd. [3] They are restoring the wheel and the factory and introducing new usages onto the rest of the site.

Arkwright-type mills

Richard Arkwright was a hard-nosed businessman from Preston. Arkwright produced a continuous spinning machine that was unlike Hargreaves' hand-operated spinning jenny. The jenny required two motions, one to draw and the other to spin and wind. Arkwrights frame spun and wound at the same time and was operated by turning a wheel. The prototype that was powered by hand, was patented in 1769. The process was particular suitable to the application of power which in those times meant a water wheel. Arkwright developed the principle into an industrial machine where a pair of frames would have 96 spindles. In searching for a reliable source of power Arkwright set up his first factory on Cromford, on the River Derwent in Derbyshire. In 1775, he filed a patents for powered preparatory machines that would card and scutch the roving needed by the waterframe. The lantern frame, to draw the roving, and development of the waterframe known as a throstle followed. [18]

Multiple machines were made and placed in one building or factory. The whole process was mechanised; this style of textile production was called the factory system, the operatives had no control on the speed of production or influence on the product, they served the needs of the machines. Arkwright protected his patent and had absolute control over the use of the system. He allowed others to manufacture under licence, but only if they purchased the complete range of machines. To do so they needed plenty of initial capital and a purpose built mill, built mainly to his dimensions with a suitable power source. [18] His patents were revoked in 1785. A watermill required a reliable steady supply of water; while this could be a river that ran at the same velocity throughout the year or a leat running from a river that provided a constant head, but more often a millpond would be built with sluices to regulate the head.

A typical Arkwright type mill was 27 feet (8.2 m) wide internally, which provided space for two 48 spindle frames, while being narrow enough to support the wooden floor beams without the need of a central pillar. The pairs of frames would be placed one per window bay as natural light was the means of illumination. An overhead shaft running the length of the building turned wooded drums at floor level, which by means of leather belts powered the frames. They were built under the supervision of specialist such as Thomas Lowe of Nottingham and John Sutcliffe of Halifax. [19]

The buildings

Kirk Mill in 1788 was 9 yards (8.2 m) by 23 yards (21 m) with a water wheel 19.5 feet (5.9 m) by 5.5 feet (1.7 m). It had 26 spinning frames. By the mill were a smithy, a barn and eight cottages. This was a three-storey fireproof mill: first floor had a height of 8.75 feet (2.67 m), the second of 7.82 feet (2.38 m). [17]

The reservoir holds 1,300,000 imperial gallons (5,900 m3) and is fed by 3 brooks: Wolfhouse (Chipping) Brook, Garstang (Dobson's) Brook and Leagram Brook. The total catchment area is 7.84 km2 (3.03 sq mi). [20] The reservoir was built in 1785, and water passed through a cast iron launder into the mill.

Later use

The mill continued to spin cotton using throstles until 1886, when it became a furniture making factory. In 2010 HJ Berry, the furniture manufacturer went into administration and the factory closed. The site was bought by SCPi Bowland Ltd. who have put in detailed planning permission, which includes restoration of the 1785 mill and the waterwheel. [21]

See also

Related Research Articles

James Hargreaves was an English weaver, carpenter and inventor who lived and worked in Lancashire, England. Hargreaves is credited with inventing the spinning jenny in 1764.

<span class="mw-page-title-main">Spinning jenny</span> Multi-spool spinning frame

The spinning jenny is a multi-spindle spinning frame, and was one of the key developments in the industrialisation of textile manufacturing during the early Industrial Revolution. It was invented in 1764-1765 by James Hargreaves in Stan hill, Oswaldtwistle, Lancashire in England.

<span class="mw-page-title-main">Cotton mill</span> Building producing yarn or cloth from cotton

A cotton mill is a building that houses spinning or weaving machinery for the production of yarn or cloth from cotton, an important product during the Industrial Revolution in the development of the factory system.

<span class="mw-page-title-main">Water frame</span> Water-powered spinning frame

The water frame is a spinning frame that is powered by a water-wheel.

<span class="mw-page-title-main">Textile manufacture during the British Industrial Revolution</span> Early textile production via automated means

Textile manufacture during the British Industrial Revolution was centred in south Lancashire and the towns on both sides of the Pennines in the United Kingdom. The main drivers of the Industrial Revolution were textile manufacturing, iron founding, steam power, oil drilling, the discovery of electricity and its many industrial applications, the telegraph and many others. Railroads, steamboats, the telegraph and other innovations massively increased worker productivity and raised standards of living by greatly reducing time spent during travel, transportation and communications.

<span class="mw-page-title-main">Spinning mule</span> Machine used to spin cotton and other fibres

The spinning mule is a machine used to spin cotton and other fibres. They were used extensively from the late 18th to the early 20th century in the mills of Lancashire and elsewhere. Mules were worked in pairs by a minder, with the help of two boys: the little piecer and the big or side piecer. The carriage carried up to 1,320 spindles and could be 150 feet (46 m) long, and would move forward and back a distance of 5 feet (1.5 m) four times a minute.

<span class="mw-page-title-main">Bowland-with-Leagram</span> Human settlement in England

Bowland-with-Leagram is a civil parish in the Ribble Valley district of Lancashire, England, covering part of the Forest of Bowland. According to the census, the parish had a population of 181 in 1951, 128 in 2001 and 169 at the Census 2011.

<span class="mw-page-title-main">Cotton-spinning machinery</span> Machinery used to spin cotton

Cotton-spinning machinery is machines which process prepared cotton roving into workable yarn or thread. Such machinery can be dated back centuries. During the 18th and 19th centuries, as part of the Industrial Revolution cotton-spinning machinery was developed to bring mass production to the cotton industry. Cotton spinning machinery was installed in large factories, commonly known as cotton mills.

<span class="mw-page-title-main">Chipping, Lancashire</span> Human settlement in England

Chipping is a village and civil parish in the borough of Ribble Valley, Lancashire, England, within the Forest of Bowland Area of Outstanding Natural Beauty. Its grid reference is SD6243, and the nearest substantial settlement is Longridge, nearly 4 mi (6.4 km) to the south. In the 2001 census, the parish had a population of 1,046, falling slightly to 1,043 at the 2011 census. The village has won several best-kept village competitions over the years. The village also won the village section of the Royal Horticultural Society Britain in Bloom competition in 2009, picking up RHS Tourism and Gold achievement awards in the process.

<span class="mw-page-title-main">Helmshore</span> Human settlement in England

Helmshore is a village in the Rossendale Valley, Lancashire, England, south of Haslingden between the A56 and the B6235, 16 miles (26 km) north of Manchester. The population at the 2011 census was 5,805. The housing in Helmshore is mixed, with some two-up, two-down terraces, top-and-bottom houses and a few surviving back-to-back cottages. Between the 1970s and 2020 new housing estates have proliferated.

<span class="mw-page-title-main">Thomas Highs</span>

Thomas Highs (1718–1803), of Leigh, Lancashire, was a reed-maker and manufacturer of cotton carding and spinning engines in the 1780s, during the Industrial Revolution. He is known for claiming patents on a spinning jenny, a carding machine and the throstle.

<span class="mw-page-title-main">Helmshore Mills Textile Museum</span> Wool and cotton mills in Lancashire, England

Helmshore Mills are two mills built on the River Ogden in Helmshore, Lancashire. Higher Mill was built in 1796 for William Turner, and Whitaker's Mill was built in the 1820s by the Turner family. In their early life they alternated between working wool and cotton. By 1920 they were working shoddy as condensor mule mills; and equipment has been preserved and is still used. The mills closed in 1967 and they were taken over by the Higher Mills Trust, whose trustees included historian and author Chris Aspin and politician Dr Rhodes Boyson, who maintained it as a museum. The mills are said to the most original and best-preserved examples of both cotton spinning and woollen fulling left in the country that are still operational.

<span class="mw-page-title-main">Howard & Bullough</span> Textile machine manufacturer in Accrington, Lancashire, England

Howard & Bullough was a firm of textile machine manufacturers in Accrington, Lancashire. The company was the world's major manufacturer of power looms in the 1860s.

<span class="mw-page-title-main">Cromford Mill</span> Grade I listed mill in Derbyshire, England

Cromford Mill is the world's first water-powered cotton spinning mill, developed by Richard Arkwright in 1771 in Cromford, Derbyshire, England. The mill structure is classified as a Grade I listed building. It is now the centrepiece of the Derwent Valley Mills UNESCO World Heritage Site, and is a multi-use visitor centre with shops, galleries, restaurants and cafes.

<span class="mw-page-title-main">Greenfield Valley Heritage Park</span> Country park in Flintshire, Wales

Greenfield Valley Heritage Park is a 70-acre (28 ha) country park in the United Kingdom. It is located in Greenfield, near the town of Holywell in North Wales. It is well known for its woodland, reservoirs, ancient monuments, rich industrial past and its factories which played a part in the Industrial Revolution.

<span class="mw-page-title-main">Ring spinning</span> Method of spinning fibres

Ring spinning is a spindle-based method of spinning fibres, such as cotton, flax or wool, to make a yarn. The ring frame developed from the throstle frame, which in its turn was a descendant of Arkwright's water frame. Ring spinning is a continuous process, unlike mule spinning which uses an intermittent action. In ring spinning, the roving is first attenuated by using drawing rollers, then spun and wound around a rotating spindle which in its turn is contained within an independently rotating ring flyer. Traditionally ring frames could only be used for the coarser counts, but they could be attended by semi-skilled labour.

<span class="mw-page-title-main">Arkwright Mill, Rochdale</span> Cotton mill in Greater Manchester, England

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was located next to Dale Mill on Roch Street. The ring and doubling frames were made by Howard & Bullough, Accrington. The mill closed in 1980, was demolished in 2007 and the land redeveloped for housing.

<span class="mw-page-title-main">Mellor Mill</span> Former six-story cotton mill in Marple, England

Mellor Mill, also known as Bottom's Mill, was a six-story cotton mill in Marple, Greater Manchester built by Samuel Oldknow in 1793. This was a six-storey, 42-foot (13 m) wide and 210-foot (64 m) long mill with additional three-storey wings making it 400 feet (120 m) in all. The mill was built for Samuel Oldknow and used to spin coarse counts. It was originally driven by the Wellington water wheel. The River Goyt, and with it the then county boundary between Derbyshire and Cheshire was diverted and a weir built, the leat fed a millpond that in later times was named the Roman Lakes. This in turn fed a second mill pond along with water from reservoir in Linnet Clough. Supplementary power was provided by a second exterior wheel known as the Waterloo wheel. The Mill reached its peak production in 1804, when 10,080 spindles were operating and around 550 people were employed. It was destroyed by fire in 1892.

<span class="mw-page-title-main">Chris Aspin</span> English author and historian (1933–2024)

Christopher Aspin was an English author, historian, and journalist. Among his published works are a biography of James Hargreaves, inventor of the spinning jenny, and The First Industrial Society: Social History of Lancashire, 1750–1850, a study of the social aspects of the industrial revolution. Aspin had a lifelong interest in local history and the history of the Lancashire textile industry in particular.

Peter Atherton was a British inventor and cotton mill proprietor, renowned for his pioneering work as a designer and manufacturer of textile machinery during the early Industrial Revolution. Atherton invested in a number of enterprises. One of his companies, Atherton & Co. became a leading manufacturer of cotton spinners, with locations in Warrington, Manchester and Liverpool.

References

  1. ↑ Aspin, Chris (2003). The Water-Spinners. West Yorkshire: Helmshore Local History Society. p. 133. ISBN   0906881110.
  2. 1 2 Coates, David (16 February 2010). "'Phoenix' hope for HJ Berry factory". Lancashire Evening Post . Johnston Press . Retrieved 1 March 2010.
  3. 1 2 Kirk Mill, accessed 10 March 2011
  4. ↑ The Water Spinners, Chris Aspin, 2003
  5. ↑ Aspin, Chris (2003). The Water-Spinners. West Yorkshire: Helmshore Local History Society. p. 135. ISBN   0906881110.
  6. ↑ Davies, Ken (2010). "Peter Atherton, Cotton Machinery Manufacturer, 1741-1799". Transactions of the Lancashire and Cheshire Antiquarian Society. 106: 85.
  7. ↑ Aspin, Chris (2002). The Water-Spinners. West Yorkshire: Helmshore Local History Society. p. 135. ISBN   0906881110.
  8. ↑ "Chipping Mill". Manchester Mercury. 6 April 1790.
  9. ↑ Davies, Ken (2010). "Peter Atherton, Cotton Machinery Manufacturer, 1741-1799". Transactions of the Lancashire and Cheshire Antiquarian Society. 106: 85–86.
  10. ↑ Aspin, Chris (2003). The Water-Spinners. West Yorkshire: Helmshore Local History Society. p. 132. ISBN   0906881110.
  11. ↑ Aspin, Chris (2003). The Water-Spinners. West Yorkshire: Helmshore Local History Society. p. 134. ISBN   0906881110.
  12. ↑ Aspin, Chris (2003). The Water-Spinners. West Yorkshire: Helmshore Local History Society. p. 137. ISBN   0906881110.
  13. ↑ Davies, Ken (2010). "Peter Atherton, Cotton Machinery Manufacturer, 1741-1799". Transactions of the Lancashire and Cheshire Antiquarian Society. 106: 86.
  14. ↑ Aspin, Chris (2003). The Water-Spinners. West Yorkshire: Helmshore Local History Society. pp. 137–138. ISBN   0906881110.
  15. ↑ Aspin, Chris (2003). The Water-Spinners. West Yorkshire: Helmshore Local History Society. p. 138. ISBN   0906881110.
  16. ↑ Davies, Ken (2010). "Peter Atherton, Cotton Machinery Manufacturer, 1741-1799". Transactions of the Lancashire and Cheshire Antiquarian Society. 106: 86–87.
  17. 1 2 3 4 Dowd, Adrian (4 February 2010). "Proposed Kirk Mill Conservation Area" (PDF). Ribble Valley Borough Council. Retrieved 3 April 2013.
  18. 1 2 Benson pp 13-14
  19. ↑ Aspin, The Water Spinners, p25
  20. ↑ Inter Hydro Technology Forest of Bowland AONB Hydro Feasibility Study
  21. ↑ Presentation to Parish Council Archived 2012-04-25 at the Wayback Machine , 11 May 2010
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.