| L&YR Class 32 | |||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
The Lancashire and Yorkshire Railway Class 32 was a small class of 0-8-2T steam locomotives, intended for heavy shunting and banking duties. [3]
| L&YR Class 32 | |||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
The Lancashire and Yorkshire Railway Class 32 was a small class of 0-8-2T steam locomotives, intended for heavy shunting and banking duties. [3]
From 1903 with the introduction of Henry Ivatt's Class L1, [2] several of the UK railway companies introduced extremely large tank engines that were eight- or even ten-coupled, [lower-roman 1] with few carrying axles, so as to achieve the maximum adhesive weight over their driving wheels. Although limited in their maximum speed by the lack of any pilot truck, their size was the maximum permitted by the loading gauge and their axle loading specifications, and so they could achieve a high tractive effort. On some lines this was put to use for accelerating suburban passenger services, in competition with the new electric railways. Other railways required heavy shunters, to cope with the increasing weight of freight trains. These were particularly needed for the new technology of hump shunting. Although the tank engine layout restricted the coal and water capacity that could be provided (their large boilers left little space for side tanks), all of these uses were relatively short ranged, and so the engines did not require long endurance.
In 1908, Hughes produced a locomotive of this type for the Lancashire and Yorkshire. These tank engines were based on the previous Aspinall Class 30 0-8-0 tender engines, although their similarities have often been over-emphasised. [1] Their coupled wheelbase was extended by two feet to 24 feet 6 inches (7.47 m), requiring the two centre drivers to be flangeless, with widened tyre treads, to allow them to negotiate a tight radius curve within a marshalling yard. [3] [4] This was more successful than similar flangeless drivers had been with Hoy's Class 26 2-6-2Ts, where they had shown a tendency for the centre drivers to drop between the rails if track in a siding wasn't maintained as well as main-line track. The two inside cylinders were 21+1⁄2 by 26 inches (546 mm × 660 mm) and were the largest in size of any non-compound engine in the country. [2]
The type 'L' boiler was again substantially different to any other class. It was 5 feet 9.5 inches in diameter (6 ft 1 in over the outer wrapper), a foot larger than the 'J' boiler of the previous engines. A Belpaire firebox and Ramsbottom safety valves were used. A similar boiler was fitted to Hughes' 1910 large-boilered Class 9, a development of the Class 30. Although this was another feature often described as being in common with the 0-8-0s, they were actually longer than the L boiler. The L boiler was unique to the Class 32, although they were made on the same flanging plates as Hughes' Dreadnought class. This unique boiler would eventually lead to the class' early withdrawal, when the boilers were due for replacement at twenty years old. [1]
Superheating was an innovation at this time and not yet firmly established, mostly owing to difficulties in providing adequate cylinder lubrication. Hughes was an advocate of superheating and used it when rebuilding the 7 ft 3 in Class 4 express 4-4-0s, fitting Schmidt superheaters and piston valves, along with Walschaerts valve gear. Despite this, he recognised that an intermittently worked shunting engine such as the 0-8-2Ts would not allow the superheater elements to reach their optimum working temperature, and so retained a simpler saturated boiler. [1] [5]
Other detail fittings included vacuum brakes and oval buffers, to avoid locking of buffer heads when working around tight curves with the engine's long overhang at each end. [1]
All five engines were ordered from Horwich Works in one batch as Lot 59 on 28 November 1907. [3] They were delivered between March and April 1908. They carried the full 'passenger' livery of the L&YR, in black with single red and double white lining. [1]
The original intention had been to employ these engines in the hump shunting yards at Aintree. However, problems with the spring hangers fouling the electric third rail system on the lines from Liverpool to Ormskirk between the engine shed and the sidings led to their withdrawal from this service. [1]
Nos. 1501 and 1502 were then allocated to Accrington for working the 1 in 38 Baxenden bank. [1]
1505 was first allocated to Agecroft for the Manchester Ship Canal sidings at New Barnes junction. Nos. 1503 and 1504 were later allocated here, upon which 1505 joined the other engines at Accrington, as a spare. [1]
The class were nicknamed either Egberts or Little Egberts. This has been described as being after a troupe of circus elephants, [1] although there is no obvious record of such a troupe. Another explanation could be The Egbert Brothers, a music hall double act of this time, known for their routine 'The Happy Dustmen'. [6]
| L&YR Nº | Works Nº | Service Date | Allocation | LMS Nº | Withdrawn |
|---|---|---|---|---|---|
| 1501 | 1004 | 31 March 1908 | Accrington | 11800 | August 1925 |
| 1502 | 1005 | 18 March 1908 | Accrington | 11801 | June 1927 |
| 1503 | 1006 | 27 March 1908 | Agecroft | 11802 | June 1926 |
| 1504 | 1007 | 10 April 1908 | Agecroft | 11803 | October 1929 |
| 1505 | 1008 | 27 April 1908 | Agecroft, later Accrington | 11804 | February 1927 |
Despite the urgency for their building, there appears to have been little need for the class in service, especially in their later years. Soon after the Grouping in 1923, LMS policy for weeding out non-standard types made the class superfluous. Their boiler's eventual need for replacement, and their unique design, led to the whole class' withdrawal between 1927 and 1929. All were allocated LMS numbers, but only 1504 was repainted in LMS black livery with its new number of 11803 painted on and losing its original cast numberplate. [1]
The BR Standard Class 3 2-6-2T was a class of steam locomotive designed by Robert Riddles for British Railways. It was essentially a hybrid design, the chassis being closely based on and sharing a number of parts with the LMS Ivatt Class 4, and having a boiler derived from a GWR No.2 boiler as fitted to the GWR Large Prairie 2-6-2T and 5600 Class 0-6-2T tank engines.
The BR Standard Class 2 2-6-0 is a class of steam locomotive, one of the British Railways Standard classes of the 1950s. They were physically the smallest of the Standard classes; 65 were built.
The London, Midland and Scottish Railway (LMS) Hughes Crab or Horwich Mogul is a class of mixed-traffic 2-6-0 steam locomotive built between 1926 and 1932. They are noted for their appearance with large steeply-angled cylinders to accommodate a restricted loading gauge.
The Lancashire and Yorkshire Railway Class 5 were 2-4-2T steam locomotives designed by Chief Mechanical Engineer (CME) John Aspinall and introduced from 1889 for local passenger work. Later batches included progressive modifications such as extended coal bunkers and Belpaire fireboxes. The final batch built from 1911 to 1914 under George Hughes incorporating superheated boilers gave increased tractive effort, others were also rebuilt to this standard. When Hughes introduced his classification system in 1919, the more powerful superheated locomotives were designated Class 6. The final examples were withdrawn in 1961.
The L&YR Class 21 is a class of small 0-4-0ST steam locomotive built by the Lancashire and Yorkshire Railway for shunting duties. They were nicknamed Pugs.
The Lancashire and Yorkshire Railway Class 27 is a class of 0-6-0 steam locomotive designed for freight work on the Lancashire and Yorkshire Railway (L&YR).
The Midland Railway 483 Class 4-4-0 was a class of steam-driven locomotive designed by Henry Fowler for passenger work on the Midland Railway. The class were nominally "rebuilds" of various earlier classes designed by Samuel W. Johnson, although the '483' class engines were, unquestionably, 'accountancy rebuilds'
. This design formed the basis for the later LMS Class 2P 4-4-0.
The Lancashire and Yorkshire Railway (L&YR) Class 8 was a four-cylinder 4-6-0 express passenger locomotive designed by George Hughes introduced in 1908.
The London and North Western Railway (LNWR) "Precursor" Class was a type of 4-4-0 ("American") steam locomotive designed by the company's Chief Mechanical Engineer, George Whale. Introduced in 1904, it should not be confused with the LNWR 2-4-0 "Precursor" Class of 1874 designed by Francis Webb, the last example of which was scrapped in 1895. In 1906, a 4-4-2T ("Atlantic") tank variant of Webb's engine, the "Precursor Tank" Class, also entered service.
The Lancashire and Yorkshire Railway (L&YR) Class 7 was a class of Atlantic passenger steam locomotives to the design of John Aspinall. Forty were built between 1899 and 1902. They were known as "High-Flyers" as a result of having a high-pitched boiler that was supposed to increase stability at speed. All passed into London, Midland and Scottish Railway (LMS) ownership on the grouping of 1923, becoming the LMS's only Atlantic tender engine class. The LMS gave them the power classification 2P. Withdrawals started in 1926, and the last was withdrawn in 1934. None were preserved.
The Great Central Railway (GCR) Class 8A was a class of 0-8-0 steam locomotive built between 1902 and 1911 for handling heavy coal trains over the Pennines. They all passed to the LNER in 1923, who redesignated them Class Q4. They were withdrawn from service between 1934 and 1951.
Although overshadowed by the later and more famous steam locomotives that John G. Robinson would go on to design, the Great Central Railway Class 11B 4-4-0 Express Passenger engines were a successful class which totalled 40. Built from 1901 to 1903, in later rebuilt form as 11D, some 11Bs would last in service until 1950. Railwaymen continued to refer to the class as "11B" even after all were rebuilt to 11D. Being contemporary with and to some extent the 4-4-0 version of Robinson's much more numerous 0-6-0 goods class 9J, which were known as "Pom-Poms", the 11Bs acquired the nickname "Pom-Pom Bogies". The London & North Eastern Railway classified the 11Bs, along with their 11C and 11D rebuilds, as Class D9.
The South African Railways Class 14B 4-8-2 of 1915 was a steam locomotive.
The L&YR Class 26 was a class of 20 2-6-2T passenger steam locomotives of the Lancashire and Yorkshire Railway designed by Henry Hoy and introduced in 1903. Most passed to the London, Midland and Scottish Railway (LMS) at the grouping in 1923 though they were withdrawn soon afterwards with none remaining in service after 1926.
The L&YR Class 24 was a class of short-wheelbase 0-6-0T steam locomotives of the Lancashire and Yorkshire Railway (L&YR). It was designed by Aspinall and introduced in 1897 for shunting duties. Twenty locomotives were built, but six were withdrawn between 1917 and 1922.
The L&YR Class 3 was a class of 4-4-0 steam locomotives of the Lancashire and Yorkshire Railway introduced in 1891 with forty being built. George Hughes rebuilt six locomotives with superheaters between 1908 and 1909, they were later designated L&YR Class 4. All passed to the London, Midland and Scottish Railway at the grouping in 1923 but were withdrawn by 1930.
The G&SWR 45 Class were 0-6-2T steam locomotives designed by Peter Drummond for the Glasgow and South Western Railway (G&SWR) of which 18 were built in 1915-1917, followed by a further 10 of a slightly modified design in 1919 after Robert Whitelegg took over as Chief Mechanical Engineer.
GCR Class 8G was a class of 10 two-cylinder steam locomotives of the 4-6-0 wheel arrangement built in 1906 for the Great Central Railway.
The L&YR 2-10-0 was a prospective design for a class of 2-10-0 steam locomotives on the Lancashire and Yorkshire Railway. Initial designs were made by George Hughes between 1913 and 1914, but none of the class were built. If they had been, these would have been the UK's first 10-coupled locomotives in regular service.
The NER Class Z was an Atlantic class of locomotives designed by Vincent Raven. It was introduced in 1911.