N-Methylaniline

Last updated
N-Methylaniline
N-Methylaniline.svg
Names
Preferred IUPAC name
N-Methylaniline
Other names
N-methylbenzenamine
N-Monomethylaniline
Anilinomethane
N-phenylmethylamine
Monomethylaniline
N-methylaminobenzene
Methylbenzeneamine
N-Methyl-phenylamine
(methylamino) benzene
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.002.610 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 249-927-4
KEGG
PubChem CID
RTECS number
  • BY4550000
UNII
UN number 2294
  • InChI=1S/C7H9N/c1-8-7-5-3-2-4-6-7/h2-6,8H,1H3
    Key: AFBPFSWMIHJQDM-UHFFFAOYSA-N
  • CNC1=CC=CC=C1
Properties
C7H9N
Molar mass 107.156 g·mol−1
Appearancecolorless liquid
Odor weak, ammonia-like [1]
Density 0.99 g/mL
Melting point −57 °C (−71 °F; 216 K)
Boiling point 194 to 196 °C (381 to 385 °F; 467 to 469 K)
Insoluble
Vapor pressure 0.3 mmHg (20 °C) [1]
-82.74·10−6 cm3/mol
Hazards
GHS labelling:
GHS-pictogram-skull.svg GHS-pictogram-silhouette.svg GHS-pictogram-pollu.svg
Danger
H301, H311, H331, H373, H410
P260, P261, P264, P270, P271, P273, P280, P301+P310, P302+P352, P304+P340, P311, P312, P314, P321, P322, P330, P361, P363, P391, P403+P233, P405, P501
Flash point 79 °C; 175 °F; 353 K [1]
Lethal dose or concentration (LD, LC):
280 mg/kg (rabbit, oral)
1200 mg/kg (guinea pig, oral) [2]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 2 ppm (9 mg/m3) [skin] [1]
REL (Recommended)
TWA 0.5 ppm (2 mg/m3) [skin] [1]
IDLH (Immediate danger)
100 ppm [1]
Related compounds
Aniline
Dimethylaniline
Related compounds
Toluidines
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Yes check.svgY  verify  (what is  Yes check.svgYX mark.svgN ?)

N-Methylaniline (NMA) is an aniline derivative. It is an organic compound with the chemical formula C6H5NH(CH3). The substance is a colorless viscous liquid, Samples turn brown when exposed to air. The chemical is insoluble in water. It is used as a latent and coupling solvent and is also used as an intermediate for dyes, agrochemicals and other organic products manufacturing. NMA is toxic and exposure can cause damage to the central nervous system and can also cause liver and kidney failure. [3]

Contents

Use as a fuel additive

N-Methylaniline is a principal component of NMA (monomethylaniline), a non-traditional antiknock agent increasingly used by petroleum refiners and fuel distributors around the world to increase the octane number of gasoline petrol. It is usually added to gasoline in concentration of around 1.3% volume to avoid high gum levels that can cause increased carbon deposits in engine parts [ citation needed ]. Higher concentrations are permitted by most regulatory agencies if a detergent and a fuel combustion modifier are added to the component to keep gum formation from happening. NMA blended in those concentrations to gasoline / petrol is not more toxic than the hundreds of chemicals that compose this fuel.

Policies on blending NMA in gasoline

China

China has banned the use of most chemical gasoline additives, including NMA, in gasoline standard directive GB17930-2013 [4] dated Dec. 18 2013, which states that “Additives used in gasoline for motor vehicles should not contain recognised harmful substances and should be used by following up with the recommended safe dosage. Chemicals, such as methylal, aniline-type compounds, halogens and those containing phosphorus and silicon, etc. should not intentionally be added in gasoline.” [5]

United States

N-Methylaniline as is (neat) does not appear on the U.S. Environmental Protection Agency’s (EPA) List of Registered Gasoline Additives. However, registration can be obtained at higher concentration which maximum authorized dosage depends on a suitable detergent and an effective fuel combustion modifier added to this component.

Fuel additives in the United States are regulated under section 211 of the Clean Air Act (as amended in January 1995). The Environmental Protection Agency (EPA) requires the registration of all fuel additives which are commercially distributed for use in highway motor vehicles in the United States, and may require testing and ban harmful additives. The EPA also regularly reviews the health and net economic benefits of Clean Air Act policies. The act also requires deposit control additives (DCAs) be added to all gasolines. This type of additive is a detergent additive that acts as a cleansing agent in small passages in the carburetor or fuel injectors. This in turn serves to ensure a consistent air and fuel mixture that will contribute to better gas mileage.

Europe

It appears that only one NMA based product for use as an octane enhancer is registered with ECHA / REACH. Because it is not an oxygenate this component does not appear on the list of recommended oxygenates in European Union (EU) petrol standards. Referring to EU EN 228:2012 and Directive 2009/30/EC, Automotive Fuels of Unleaded Petrol. Requirements and Test Methods.

Worldwide Fuel Charter

Because it is not an oxygenate NMA does not appear on the list of recommended oxygenates under category 4 of the Worldwide Fuel Charter published by the European Automobile Manufacturers Association (ACEA), which refers to emission standards for unleaded gasoline for “markets with advanced requirements for emission control.” Under policies that are specific to those countries NMA is banned in China and Russia. Most other countries follow the environmental rules of registration of the United States and Europe for the use of this component as an octane enhancer in gasoline / petrol.

Other reactions

It maybe reacted with diglycidyl aniline to produce a complex mixture of cyclic products including 7 and 8 membered rings. [6]

See also

Related Research Articles

<span class="mw-page-title-main">Gasoline</span> Liquid fuel, also called petrol, derived from petroleum

The terms gasoline, or simply gas identify and describe the petrochemical product characterized as a transparent, yellowish, and flammable liquid normally used as a fuel for spark-ignited internal combustion engines. When formulated as a fuel for engines, gasoline is chemically composed of organic compounds derived from the fractional distillation of petroleum and later chemically enhanced with gasoline additives.

<span class="mw-page-title-main">Tetraethyllead</span> Organolead compound

Tetraethyllead (commonly styled tetraethyl lead), abbreviated TEL, is an organolead compound with the formula Pb(C2H5)4. It is a fuel additive, first being mixed with gasoline beginning in the 1920s as a patented octane rating booster that allowed engine compression to be raised substantially. This in turn increased vehicle performance and fuel economy. TEL was first synthesised by German chemist Carl Jacob Löwig in 1853. American chemical engineer Thomas Midgley Jr., who was working for General Motors, was the first to discover its effectiveness as an antiknock agent in 1921, after spending several years attempting to find an additive that was both highly effective and inexpensive.

<span class="mw-page-title-main">Octane</span> Hydrocarbon compound with the formula C8H18

Octane is a hydrocarbon and an alkane with the chemical formula C8H18, and the condensed structural formula CH3(CH2)6CH3. Octane has many structural isomers that differ by the amount and location of branching in the carbon chain. One of these isomers, 2,2,4-trimethylpentane is used as one of the standard values in the octane rating scale.

<span class="mw-page-title-main">Heptane</span> Chemical compound

Heptane or n-heptane is the straight-chain alkane with the chemical formula H3C(CH2)5CH3 or C7H16. When used as a test fuel component in anti-knock test engines, a 100% heptane fuel is the zero point of the octane rating scale (the 100 point is 100% iso-octane). Octane number equates to the anti-knock qualities of a comparison mixture of heptane and iso-octane which is expressed as the percentage of iso-octane in heptane, and is listed on pumps for gasoline (petrol) dispensed globally.

An octane rating, or octane number, is a standard measure of a fuel's ability to withstand compression in an internal combustion engine without detonating. The higher the octane number, the more compression the fuel can withstand before detonating. Octane rating does not relate directly to the power output or the energy content of the fuel per unit mass or volume, but simply indicates gasoline's capability against compression.

<span class="mw-page-title-main">Avgas</span> Aviation fuel

Avgas is an aviation fuel used in aircraft with spark-ignited internal combustion engines. Avgas is distinguished from conventional gasoline (petrol) used in motor vehicles, which is termed mogas in an aviation context. Unlike motor gasoline, which has been formulated without lead since the 1970s to allow the use of catalytic converters for pollution reduction, the most commonly used grades of avgas still contain tetraethyl lead, a toxic substance used to prevent engine knocking. There are ongoing efforts to reduce or eliminate the use of lead in aviation gasoline.

<span class="mw-page-title-main">Dimethylaniline</span> Chemical compound

N,N-Dimethylaniline (DMA) is an organic chemical compound, a substituted derivative of aniline. It is a tertiary amine, featuring a dimethylamino group attached to a phenyl group. This oily liquid is colourless when pure, but commercial samples are often yellow. It is an important precursor to dyes such as crystal violet.

Methyl <i>tert</i>-butyl ether Chemical compound

Methyl tert-butyl ether (MTBE), also known as tert-butyl methyl ether, is an organic compound with a structural formula (CH3)3COCH3. MTBE is a volatile, flammable, and colorless liquid that is sparingly soluble in water. Primarily used as a fuel additive, MTBE is blended into gasoline to increase its octane rating and knock resistance, and reduce unwanted emissions.

<span class="mw-page-title-main">Liquid fuel</span> Liquids that can be used to create energy

Liquid fuels are combustible or energy-generating molecules that can be harnessed to create mechanical energy, usually producing kinetic energy; they also must take the shape of their container. It is the fumes of liquid fuels that are flammable instead of the fluid. Most liquid fuels in widespread use are derived from fossil fuels; however, there are several types, such as hydrogen fuel, ethanol, and biodiesel, which are also categorized as a liquid fuel. Many liquid fuels play a primary role in transportation and the economy.

Shell V-Power is the brand name given to Shell's enhanced high specification fuels for road motor vehicles including Shell V-Power Nitro+ and Shell V-Power Diesel. Introduced in Italy in 2001, Shell relaunched the fuel in March 2008, under the name Nitrogen-Enriched Shell V-Power, with nitrogen-containing detergents.

<span class="mw-page-title-main">Methylcyclopentadienyl manganese tricarbonyl</span> Chemical compound

Methylcyclopentadienyl manganese tricarbonyl (MMT or MCMT) is an organomanganese compound with the formula (C5H4CH3)Mn(CO)3. Initially marketed as a supplement for use in leaded gasoline, MMT was later used in unleaded gasoline to increase the octane rating. Following the implementation of the Clean Air Act (United States) (CAA) in 1970, MMT continued to be used alongside tetraethyl lead (TEL) in the US as leaded gasoline was phased out (prior to TEL finally being banned from US gasoline in 1995), and was also used in unleaded gasoline until 1977. Ethyl Corporation obtained a waiver from the U.S. EPA (Environmental Protection Agency) in 1995, which allows the use of MMT in US unleaded gasoline (not including reformulated gasoline) at a treat rate equivalent to 8.3 mg Mn/L (manganese per liter).

<span class="mw-page-title-main">Ethylbenzene</span> Hydrocarbon compound; precursor to styrene and polystyrene

Ethylbenzene is an organic compound with the formula C6H5CH2CH3. It is a highly flammable, colorless liquid with an odor similar to that of gasoline. This monocyclic aromatic hydrocarbon is important in the petrochemical industry as a reaction intermediate in the production of styrene, the precursor to polystyrene, a common plastic material. In 2012, more than 99% of ethylbenzene produced was consumed in the production of styrene.

<i>tert</i>-Butyl alcohol Chemical compound

tert-Butyl alcohol is the simplest tertiary alcohol, with a formula of (CH3)3COH (sometimes represented as t-BuOH). Its isomers are 1-butanol, isobutanol, and butan-2-ol. tert-Butyl alcohol is a colorless solid, which melts near room temperature and has a camphor-like odor. It is miscible with water, ethanol and diethyl ether.

<span class="mw-page-title-main">Common ethanol fuel mixtures</span> Mixtures of common ethanol fuel types

Several common ethanol fuel mixtures are in use around the world. The use of pure hydrous or anhydrous ethanol in internal combustion engines (ICEs) is only possible if the engines are designed or modified for that purpose, and used only in automobiles, light-duty trucks and motorcycles. Anhydrous ethanol can be blended with gasoline (petrol) for use in gasoline engines, but with high ethanol content only after engine modifications to meter increased fuel volume since pure ethanol contains only 2/3 of the BTUs of an equivalent volume of pure gasoline. High percentage ethanol mixtures are used in some racing engine applications as the very high octane rating of ethanol is compatible with very high compression ratios.

Oxygenated chemical compounds are hydrocarbons which contain at least one oxygen atom as a part of their chemical structure. The term often refers to oxygenated chemical compounds added to fuels. Oxygenates are usually employed as gasoline additives to reduce carbon monoxide and soot that is created during the burning of the fuel. Compounds related to soot, such as polyaromatic hydrocarbons (PAHs) and nitrated PAHs, are also reduced.

An antiknock agent is a gasoline additive used to reduce engine knocking and increase the fuel's octane rating by raising the temperature and pressure at which auto-ignition occurs. The mixture known as gasoline or petrol, when used in high compression internal combustion engines, has a tendency to knock and/or to ignite early before the correctly timed spark occurs.

<span class="mw-page-title-main">Top Tier Detergent Gasoline</span> Petroleum product

Top Tier Detergent Gasoline and Top Tier Diesel Fuel are performance specifications and trademarks designed and supported by several automakers. BMW, General Motors, Fiat Chrysler Automobiles, Ford, Acura/Honda, Toyota, Volkswagen, Mercedes-Benz, Navistar, and Audi support the gasoline standard, while General Motors, Volkswagen, Detroit Diesel, and Navistar support the diesel standard. Each of these automakers recommends the use of Top Tier Detergent Gasoline in their owner's manuals. Top Tier fuels must maintain levels of detergent additives that are believed to result in a higher standard of engine cleanliness and performance as compared to the United States Environmental Protection Agency (EPA) requirement. In addition, Top Tier fuels may not contain metallic additives, which can harm the vehicle emission system and create pollutants. As of 2018, Top Tier Detergent Gasoline is available from 61 licensed retail brands, and Top Tier Diesel Fuel is available from 5 licensed retail brands.

Methyl tert-butyl ether (MTBE) is a gasoline additive that replaced tetraethyllead. MTBE is an oxygenate and raises gasoline's octane number. Its use declined in the United States in response to environmental and health concerns. It has polluted groundwater due to MTBE-containing gasoline being spilled or leaked at gas stations. MTBE spreads more easily underground than other gasoline components due to its higher solubility in water. Cost estimates for removing MTBE from groundwater and contaminated soil range from $1 billion to $30 billion, including removing the compound from aquifers and municipal water supplies, and replacing leaky underground oil tanks. Who will pay for remediation is controversial. In one case, the cost to oil companies to clean up the MTBE in wells belonging to the city of Santa Monica, California is estimated to exceed $200 million.

Petroleum naphtha is an intermediate hydrocarbon liquid stream derived from the refining of crude oil with CAS-no 64742-48-9. It is most usually desulfurized and then catalytically reformed, which rearranges or restructures the hydrocarbon molecules in the naphtha as well as breaking some of the molecules into smaller molecules to produce a high-octane component of gasoline.

References

  1. 1 2 3 4 5 6 NIOSH Pocket Guide to Chemical Hazards. "#0436". National Institute for Occupational Safety and Health (NIOSH).
  2. "Monomethyl aniline". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. "TOXNET". toxnet.nlm.nih.gov. Archived from the original on 2018-09-20. Retrieved 2016-05-28.
  4. "GB17930-2013 Gasoline for Motor Vehicles" (PDF).
  5. "The Asian Clean Fuels Association: ACFA | Promotion of clean fuels in Asia". www.acfa.org.sg. Retrieved 2016-05-28.
  6. Matějka, L.; Tkaczyk, M.; Pokorný, S.; Dušek, K. (1986-05-01). "Cyclization in the reaction between diglycidylaniline and amine". Polymer Bulletin. 15 (5): 389–396. doi:10.1007/BF00265719. ISSN   1436-2449.