![]() | |
Names | |
---|---|
Preferred IUPAC name Octachloropropane | |
Other names Propane octachloride, Perchloropropane | |
Identifiers | |
3D model (JSmol) | |
ChemSpider | |
PubChem CID | |
CompTox Dashboard (EPA) | |
| |
| |
Properties | |
C3Cl8 | |
Molar mass | 319.63 g·mol−1 |
Melting point | 160 °C (320 °F; 433 K) [1] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). |
Octachloropropane or perchloropropane is the chemical compound with elemental formula C3Cl8 and structural formula Cl3C−CCl2−CCl3. Its molecule has a simple chain of three carbon atoms connected by single bonds, with chlorine atoms filling their remaining bonds. It is a chlorocarbon, specifically the third simplest perchloroalkane (after carbon tetrachloride and hexachloroethane). It can be described as a derivative of propane C3H8, with all hydrogen atoms replaced by chlorine.
Octachloropropane is a clear white crystalline solid at room temperature, with hexagonal crystal structure. It is easily deformed by mechanical stress, without losing its crystal structure, like a metal. [2] [3] [1]
Synthesis and characterization of octachloropropane was reported in 1875 by Krafft and Merz. [4] Its remarkable crystal growth and deformation properties were noted by McCrone in 1949. [5] [6] [7] Its use as a model for crystal deformation of minerals was pioneered by Win D. Means, Marc W. Jessel and others in the 1980s. [8] [1]
Octachloropropane can be obtained by reacting partially chlorinated propane with iodine trichloride (as in the original synthesis by Krafft and Merz), or with chlorine at high pressure or with activation by light. The temperature must be close to but below 200 °C, since at higher temperatures further reaction with chlorine gives carbon tetrachloride and hexachloroethane instead. [4]
Octachloropropane treated with aluminium in diethyl ether affords several unsaturated perchlorocarbons, by way of hexachloropropene (C3Cl6, Cl3C−CCl=CH2). [9] For instance,
The products were identified as
with conjectured structures CCl≡C−CCl=CCl−CCl=CCl2 or CCl2=CCl−C≡C−CCl=CCl2, and
which were claimed to be cis/trans isomers and atropisomers of CCl2=CCl−CCl=CCl−CCl=CCl2 (octachloro(1,3,5)hexatriene). [9]
Octacholopropane is used by geologists and metallurgists as a model to study the plastic deformation of crystalline minerals and rocks under stress. The large individual crystalline grains (0.1-1.0 mm diameter) are distinguishable with a polarized light microscope at moderate magnification, and generally retain their size and approximate aspect ratio as the material undergoes shear strain. [3] [2] [10] The grains will spontaneously arise from the quenched solid, in minutes or hours, even at room temperature. [1]
The material's flow driven by stress can be followed by embedding in it small amounts of fine inert particles, such as grit 1000 abrasives; the particles apparently do not affect the grain evolution and deformation. [3] [2] [10] Camphor (with rhombohedral crystal structure) was previously proposed for this use. [11]
Octachlorpropane reacts with niobium pentoxide and tantalum pentoxide at atmospheric pressure yielding the corresponding chlorides. It also reacts with titanium dioxide, if the other two oxides are present. This reaction, followed with distillation of the titanium tetrachloride at about 225 °C, could be an effective way to remove TiO2 from mixtures of those oxides. [12]
Octachloropropane has been commercialized as a snail killer with the brand name HRS-1622, although it was not found to be very effective. [13]
Octachloropropane was found to be highly toxic to larvae of the housefly, with an efficiency comparable to decachlorobutane and hexachlorobenzene (BHC). Unlike the latter, it is somewhat volatile and thus effective even without physical contact with the solid. [14]
Octachloropropane was detected as a relatively minor item among dozens of highly chlorinated and perchlorinated hydrocarbons present as contaminants in the carbon tetrachloride produced from methanol by a plant in China, [15] and also in the condensed waste from etching aluminium films in an integrated circuit factory. [16]
In organic chemistry, a hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. Hydrocarbons are examples of group 14 hydrides. Hydrocarbons are generally colourless and hydrophobic; their odor is usually faint, and may be similar to that of gasoline or lighter fluid. They occur in a diverse range of molecular structures and phases: they can be gases, liquids, low melting solids or polymers.
Carbon tetrachloride, also known by many other names (such as carbon tet for short and tetrachloromethane, also recognised by the IUPAC) is a chemical compound with the chemical formula CCl4. It is a non-flammable, colourless liquid with a "sweet" chloroform-like smell that can be detected at low levels. It was formerly widely used in fire extinguishers, as a precursor to refrigerants and as a cleaning agent, but has since been phased out because of environmental and safety concerns. Exposure to high concentrations of carbon tetrachloride can affect the central nervous system and degenerate the liver and kidneys. Prolonged exposure can be fatal.
Tetrachloroethylene, also known under the systematic name tetrachloroethene, or perchloroethylene, and abbreviations such as "perc" (or "PERC"), and "PCE", is a chlorocarbon with the formula Cl2C=CCl2. It is a colorless liquid widely used for dry cleaning of fabrics, hence it is sometimes called "dry-cleaning fluid". It also has its uses as an effective automotive brake cleaner. It has a mild sweet odor, similar to the smell of chloroform, detectable by most people at a concentration of 1 part per million (1 ppm).
The organic compound 1,1,1-trichloroethane, also known as methyl chloroform and chlorothene, is a chloroalkane with the chemical formula CH3CCl3. It is an isomer of 1,1,2-trichloroethane. This colorless, sweet-smelling liquid was once produced industrially in large quantities for use as a solvent. It is regulated by the Montreal Protocol as an ozone-depleting substance and its use is being rapidly phased out.
Silicon tetrachloride or tetrachlorosilane is the inorganic compound with the formula SiCl4. It is a colorless volatile liquid that fumes in air. It is used to produce high purity silicon and silica for commercial applications. It is a part of the chlorosilane family.
Tantalum(V) chloride, also known as tantalum pentachloride, is an inorganic compound with the formula TaCl5. It takes the form of a white powder and is commonly used as a starting material in tantalum chemistry. It readily hydrolyzes to form tantalum(V) oxychloride (TaOCl3) and eventually tantalum pentoxide (Ta2O5); this requires that it be synthesised and manipulated under anhydrous conditions, using air-free techniques.
Hafnium(IV) chloride is the inorganic compound with the formula HfCl4. This colourless solid is the precursor to most hafnium organometallic compounds. It has a variety of highly specialized applications, mainly in materials science and as a catalyst.
Chlorotoluene is a group of three isomeric chemical compounds. They consist of a disubstituted benzene ring with one chlorine atom and one methyl group.
Tungsten hexachloride is an inorganic chemical compound of tungsten and chlorine with the chemical formula WCl6. This dark violet blue compound exists as volatile crystals under standard conditions. It is an important starting reagent in the preparation of tungsten compounds. Other examples of charge-neutral hexachlorides are rhenium(VI) chloride and molybdenum(VI) chloride. The highly volatile tungsten hexafluoride is also known.
Tantalum(V) bromide is the inorganic compound with the formula Ta2Br10. Its name comes from the compound's empirical formula, TaBr5. It is a diamagnetic, orange solid that hydrolyses readily. The compound adopts an edge-shared bioctahedral structure, which means that two TaBr5 units are joined by a pair of bromide bridges. There is no bond between the Ta centres. Niobium(V) chloride, niobium(V) bromide, niobium(V) iodide, tantalum(V) chloride, and tantalum(V) iodide all share this structural motif.
Rhenium pentachloride is an inorganic compound of chlorine and rhenium. The compound has the formula Re2Cl10 but it is usually referred to as rhenium pentachloride. It is a red-brown solid.
Hexachlorobutadiene, (often abbreviated as "HCBD") Cl2C=C(Cl)C(Cl)=CCl2, is a colorless liquid at room temperature that has an odor similar to that of turpentine. It is a chlorinated aliphatic diene with niche applications but is most commonly used as a solvent for other chlorine-containing compounds. Structurally, it has a 1,3-butadiene core, but fully substituted with chlorine atoms.
Wendell Earl Dunn Jr. was an American chemical engineer, metallurgist, and inventor. His technologies for high temperature chlorination, gold, tantalum and titanium extraction are still widely used.
Niobium(IV) chloride, also known as niobium tetrachloride, is the chemical compound of formula NbCl4. This compound exists as dark violet crystals, is highly sensitive to air and moisture, and disproportiates into niobium(III) chloride and niobium(V) chloride when heated.
Niobium oxychloride is the inorganic compound with the formula NbOCl3. It is a white, crystalline, diamagnetic solid. It is often found as an impurity in samples of niobium pentachloride, a common reagent in niobium chemistry.
Sulfur tetrachloride is an inorganic compound with chemical formula SCl4. It has only been obtained as an unstable pale yellow solid. The corresponding SF4 is a stable, useful reagent.
Uranium pentachloride is an inorganic chemical compound composed of uranium in the +5 oxidation state and five chlorine atoms.
1,1,1,3,3,3-Hexachloropropane is a compound of chlorine, hydrogen, and carbon, with chemical formula C3Cl6H2, specifically Cl3C−CH2−CCl3. Its molecule can be described as that of propane with chlorine atoms substituted for the six hydrogen atoms on the extremal carbons.
Protactinium(IV) chloride is an inorganic compound. It is an actinide halide, composed of protactinium and chlorine. It is radioactive, and has the chemical formula of PaCl4. It is a chartreuse-coloured (yellowish-green) crystal of the tetragonal crystal system.
Hafnium compounds are compounds containing the element hafnium (Hf). Due to the lanthanide contraction, the ionic radius of hafnium(IV) (0.78 ångström) is almost the same as that of zirconium(IV) (0.79 angstroms). Consequently, compounds of hafnium(IV) and zirconium(IV) have very similar chemical and physical properties. Hafnium and zirconium tend to occur together in nature and the similarity of their ionic radii makes their chemical separation rather difficult. Hafnium tends to form inorganic compounds in the oxidation state of +4. Halogens react with it to form hafnium tetrahalides. At higher temperatures, hafnium reacts with oxygen, nitrogen, carbon, boron, sulfur, and silicon. Some compounds of hafnium in lower oxidation states are known.