Ruth (sternwheeler 1895)

Last updated
Sternwheelers Ruth and Gypsy at Salem, Oregon.jpeg
Ruth moored at Salem, Oregon, during flood, sometime between 1895 and 1898, with smaller sternwheeler Gypsy alongside.
History
Name:Ruth
Owner: Oregon Railroad & Navigation Co.
Route: Willamette River
Builder: Oregon Railroad & Navigation Co.
Launched: 31 December 1895 [1]
Maiden voyage: 10 January 1896
Out of service: 1920 [2]
Identification: US Official Number 111103
General characteristics
Class and type: riverine steamboat, passenger/freighter
Tonnage:
Length: 156 ft 4 in (47.65 m) [3]
Beam: 34 ft 0 in (10.36 m) [3]
Depth: 4 ft 6 in (1.37 m) [3]
Installed power: Twin single-cylinder horizontally mounted steam engines, 14" bore by 54" stroke, 13 NHP [2]
Propulsion: stern wheeler
Crew: 20

The steamboat Ruth operated from 1896 to 1917 on the Willamette River in the U.S. state of Oregon. [2] Ruth played an important role in the transport of goods and agricultural products in Oregon, and was one of the fastest steamboats ever to operate on the upper Willamette. This vessel should not be confused with the sternwheeler Ruth built at Libby, Montana in 1896. [2]

Contents

The wheat trade

Farmers would grow wheat in the Willamette Valley, then bring it by wagon to river ports where it would be bagged and loaded onto steamboats bound downriver to Portland. One of the key centers to the wheat trade was the now-abandoned town of Lincoln, Oregon, in Polk County. Originally known as Doak's Ferry, Lincoln was about 6 miles (9.7 km) south of Salem, Oregon. [4] Lincoln, was once the most important wheat port on the Willamette, as historian Corning describes:

Farmers from a wide area hauled their grain to Lincoln: and at the height of its prosperity, when river shipping was at its best, the town had five large warehouses, a grist mill, saw mill, beehive factory, blacksmith shop, tin shop, shoe and harness shop, store, lodge hall, church, school, and several dwellings, as well as the ferry that had operated since the early forties. Essentially a place of commerce, Lincoln one year shipped 350,000 bushels of wheat from its warehouses -- a record never equalled by any shipping point in the Willamette Valley except Portland. [5]

Operations

By the 1890s, rail construction in the Willamette Valley had caused a sharp decline in steamboat traffic, as more and more freight was shipped by rail rather than water. Lincoln remained an exception, and well into the 1890s three steamboats a day called at the town. The vessels would leave Portland in the morning, pass through the Willamette Locks, and arrive at Lincoln at about 3:00 p.m. [4] Ruth, when newly launched, was able to beat this time, and under Captain Miles Bell, set what may have been a record time for the Lincoln run, as historian Corning describes:

Captain John Sprong, operator of the ferry, told of hearing a boat coming up the river while he was at lunch. Believing that his watch had failed him, he rushed out onto the bank, where the Ruth was just drawing in, and asked the crew for the time of day. Captain Bell answered: "12:25, Johnny, and don't forget that!" The standing record had been surpassed by more than two hours. [6]

In addition to the Willamette, Ruth was also worked on the Yamhill River up to Dayton, Oregon. [7]

Steamboat operation was hazardous during this time. The vessels were endangered by snags and other dangers in the rivers, and even when there was no overall threat to the vessel, the crewmen themselves were at risk. This was illustrated by an incident involving Ruth which occurred on February 16, 1901, which was investigated by the Portland local office of the Steamboat Inspection Service:

At about 4.30 a. m., while the steamer Ruth was en route from Portland to Corvallis. Oreg., she struck a piece of driftwood near the mouth of the Santiam River, Oregon, Willamette River. The watchman, Ira Bell, was sent into the hold to see if any damage had been done to the hull. He has not been seen since that time, and is supposed to have fallen overboard and drowned. [8]

During the fiscal year, there were three other instances in the local Portland District of the Steamboat Inspection Service of crewmen drowning as a result of falling overboard. [8]

Disposition

The Oregonian newspaper of March 31, 1917 reported that the Ruth was struck by the stern of the newly launched all-steel Vesterlide, the first ship produced by the Northwest Steel shipyard located at the foot of SW Sheridan Street. The Ruth sank as the result of this collision, and three were injured. [9]

Notes

  1. ↑ "Upper River Traffic". Statesman Journal. 3 January 1896. p. 3. Retrieved 6 July 2019– via Newspapers.com. Lock-green.svg
  2. 1 2 3 4 Affleck, Century of Paddlewheelers, at 24.
  3. 1 2 3 4 5 Merchant Vessels of the United States. Washington, DC: United States Government Printing Office. 1913–1914.
  4. 1 2 Corning, Willamette Landings, pp. 99-106.
  5. ↑ Corning, Willamette Landings, at 100.
  6. ↑ Corning, Willamette Landings, at 102.
  7. ↑ Timmen, Blow for the Landing, at 196.
  8. 1 2 Dept. Commerce and Labor, Annual Report for 1902, at 26.
  9. ↑ http://portland.daveknows.org/2011/03/31/march-31-1917-vesterlide-launched-first-all-steel-steamer-built-in-portland/

Related Research Articles

<i>Altona</i> (sternwheeler)

The steamship Altona operated from 1890 to 1907 on the Willamette River in the U.S. state of Oregon. In 1907, she was transferred to Alaska.

<i>Leona</i> (sternwheeler)

The steamship Leona operated from 1899 to 1912 on the Willamette River in the U.S. state of Oregon. This vessel was original launched under the name McMinnville in 1899, and should not be confused with an earlier vessel named McMinnville, which ran on the Willamette River from 1877 to 1881.

Willamette Chief

Willamette Chief was a sternwheel steamboat built in 1874 for the Willamette River Navigation Company.

<i>Echo</i> (sternwheeler 1865)

Echo was a sternwheel steamboat that operated on the Willamette River from about 1865 to 1873 and was one of the first steamboats to carry what was then considered a large cargo out of Eugene, Oregon.

<i>Ramona</i> (sternwheeler 1892)

The river sternwheeler Ramona operated from 1892 to 1908 on the Willamette River in Oregon, on the Stikine River running from Wrangell, Alaska into British Columbia, and the Fraser River, in British Columbia. This vessel should not be confused with the coastal steamship Ramona which also ran in Alaskan waters.

<i>Canemah</i> (sidewheeler)

Canemah was one of the first steamboats to run on the Willamette River above Willamette Falls. Canemah was the first steamboat to load grain at Corvallis, the first to carry the mail on the Willamette River, and the first steamboat in Oregon to suffer a fatal boiler explosion.

<i>Multnomah</i> (sidewheeler 1851)

The Multnomah was one of the first steamboats to operate on the Willamette and Yamhill rivers. This vessel should not be confused with the Multnomah, a steamboat built in Portland, Oregon in 1885, which was larger and of a much different design.

<i>Shoalwater</i> (sidewheeler 1852)

The steamboat Shoalwater was the sixth steamer to operate on the upper Willamette River, which refers to the part of the river above Willamette Falls at Oregon City. In a short career of six years, Shoalwater was renamedFenix, Franklin, and Minnie Holmes. Shoalwater was the first steamboat in Oregon to suffer a boiler explosion, although no fatalities resulted.

<i>Rival</i> (sternwheeler)

Rival was a sternwheel steamboat that ran on the Willamette River between Oregon City and Portland, Oregon from 1860 to 1868. Rival was intended to be a boat which would promise low fares in an effort to beat a steamboat monopoly which was then in formation.

<i>Governor Grover</i> (sternwheeler)

Governor Grover was a sternwheel steamboat that ran on the Willamette River during the 1870s. Because of the completion of the Willamette Locks in late 1872, it was possible for vessels such as Governor Grover to be built in Portland, Oregon and then readily navigate the Willamette above Willamette Falls.

<i>Elk</i> (sternwheeler 1857)

Elk was a stern-wheel driven steamboat built on the Willamette River in 1857 at Canemah, Oregon. This steamboat is chiefly remembered for its destruction by a boiler explosion in which by good fortune no one was seriously hurt. A folklore tale later arose about this disaster.

<i>Oregona</i> (sternwheeler)

The steamboat Oregona operated on the Willamette River, the Columbia River and the Yamhill River from 1904 to 1936. From 1924 to 1936 this vessel was known as the Interstate.

<i>Grey Eagle</i> (sternwheeler)

Grey Eagle was a wooden sternwheel-driven steamboat that operated on the Willamette and Yamhill rivers in the United States from 1894 to 1930. In 1903 Grey Eagle became the last commercial steamboat to run upriver to Junction City, Oregon.

<i>Elwood</i> (sternwheeler)

Elwood was a sternwheel steamboat which was built to operate on the Willamette River, in Oregon, but which later operated on the Lewis River in Washington, the Stikine River in Canada, and on Puget Sound. The name of this vessel is sometimes seen spelled "Ellwood". Elwood is probably best known for an incident in 1893, when it was approaching the Madison Street Bridge over the Willamette River in Portland, Oregon. The bridge swung open to allow the steamer to pass. However, a streetcar coming in from the east end of the bridge failed to notice the bridge was open, and ran off into the river in the Madison Street Bridge disaster.

Upper Willamette Transportation Line

The Upper Willamette Transportation Line was a line of four inland steamboats that operated from the fall of 1859 to the summer of 1860 on the upper Willamette River in the state of Oregon.

<i>Oregon</i> (sidewheeler 1852)

Oregon was a side-wheel driven steamboat that operated on the Willamette River in the state of Oregon from 1852 to 1854. The steamer was not economically successful and became a total loss by sinking after a short career.

<i>Minnehaha</i> (sternwheeler)

Minnehaha was a sternwheel-driven steamboat which was built in 1866 on Oswego Lake, then known as Sucker Lake, in Oregon, United States. Minnehaha was later transferred to the Willamette and Columbia rivers where it operated for the first part of the 1870s.

<i>Albany</i> (sternwheeler 1868)

Albany was a stern-wheel driven steamboat that operated on the Willamette River from 1868 to 1875. This vessel should not be confused with the later sternwheeler Albany, which ran, also on the Willamette River, from 1896 to 1906, when it was rebuilt and renamed Georgie Burton.

<i>Occident</i> (sternwheeler)

Occident was a steamer that operated on the Willamette River and occasionally its tributary, the Santiam River from 1875 to about 1890. Occident was designed primarily for freight work, and did not have passenger accommodations. This Occident should not be confused with the smaller steam launch Occident, apparently propeller-driven, which operated out of Astoria, Oregon in the 1890s.

<i>Surprise</i> (sternwheeler)

Surprise was a steamboat which operated on the upper Willamette River from 1857 to 1864.

References

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.