The SPARS code is a three-position alphabetic classification system developed in the early 1980s by the Society of Professional Audio Recording Services (SPARS) for commercial compact disc releases to denote aspects of the sound recording and reproduction process, distinguishing between the use of analog equipment and digital equipment. The code's three positions refer to recording, mixing, and mastering respectively. The first two positions may be coded either "A" for analog or "D" for digital; the third position (mastering) is always "D" on digital CDs. The scheme was not originally intended to be limited to use on digital packaged media: it was also available for use in conjunction with analog releases such as vinyl or cassette (where the final character would always be "A"), but this was seldom done in practice.
The system was first implemented in 1984. Due to increasing complexity of recording and mixing processes developed over the code's first decade of use, SPARS decided to withdraw endorsement of the code in 1991 because they felt the code was overly simplistic and did not accurately reflect the complexity of typical recording and mixing processes in use at the time. However, many record labels continued to use the code and SPARS decided to re-endorse the SPARS code in 1995.
The three letters of the code have the following meanings:
Eight possible variants of the code exist:
As digital tape recorders only became widely available in the late 1970s, almost all recordings prior to this date that appear on CD will be AAD or ADD, having been digitally remastered. This means that the original analog master tape has been converted (transcribed) to digital. It does not always imply that there has been any additional editing or mixing, although this may have taken place.
In practice DAD was very rare, as many companies (especially the well-known classical music labels) used digital tape recorders (which were not prohibitively more expensive than analog tape recorders) during the editing or mixing stage.
The jewel box booklet and/or inlay of early compact discs included the SPARS code, typically DDD, ADD, or AAD. The typeface Combi Symbols CD includes the two common ways that the code was written on recordings.
Chris Stone and other members of the Society of Professional Audio Recording Services (SPARS) proposed the code with a set of guidelines for CD manufacturers to mark their product with an indication of exactly which parts of the recording process were analog and which were digital. [2]
The SPARS code was first introduced on commercial CD releases by PolyGram in 1984. [3]
SPARS withdrew endorsement of the code in 1991 due to confusion over analog and digital conversions and interfaces; many felt the SPARS code oversimplified and meaningless. [2] However, many labels continued to use it, and in 1995, the organization re-endorsed the code. [2]
The main limitation of the code is that it only covers the type of recorder used, not taking into account other equipment used in the production of the recording. For example, during the mixing stage (the middle letter in the code) many DDD recordings may have actually been converted from digital to analog, mixed on an analog mixing console, but converted back to digital and digitally recorded, thus earning it a D in the relevant part of the code. In addition to this, many recordings have effects or parts of different recordings added on to them, creating more confusion for the code.
Regardless of the quality of the recording, many DDD classical music compact discs typically sold for considerably more than their ADD counterparts of the same work, due to the so-called premium attached to the fledgling digital recording technology. For instance, Herbert von Karajan's and Berliner Philharmoniker's rendition of Beethoven's Symphony No. 3, an analogue recording from 1977 that won the Grand Prix du Disque, sold for considerably less than their 1984 digital recording of the same piece, though the newer recording was not particularly critically acclaimed.
These albums with common SPARS codes (AAD, ADD, DDD) are arranged by year of release on CD, where known:
Many older recordings previously issued on vinyl were reissued on CD, beginning with the format's commercial introduction in late 1982 (see Digital recording for a timeline). Reissue CDs often only have the original LP's copyright dates on them, so it's not obvious when the CDs were actually made. If they bear a SPARS code, though, the manufacture date was no earlier than 1984. Most of these older recordings were analog, so it's not unusual to see AAD and ADD codes, but occasional examples of digital-recording codes appear on later CD editions, such as these:
The compact disc (CD) is a digital optical disc data storage format that was co-developed by Philips and Sony to store and play digital audio recordings. It uses the Compact Disc Digital Audio format which typically provides 74 minutes of audio on a disc. In later years, the compact disc was adapted for non-audio computer data storage purposes as CD-ROM and its derivatives. First released in Japan in October 1982, the CD was the second optical disc technology to be invented, after the much larger LaserDisc (LD). By 2007, 200 billion CDs had been sold worldwide.
Compact Disc Digital Audio, also known as Digital Audio Compact Disc or simply as Audio CD, is the standard format for audio compact discs. The standard is defined in the Red Book technical specifications, which is why the format is also dubbed "Redbook audio" in some contexts. CDDA utilizes pulse-code modulation (PCM) and uses a 44,100 Hz sampling frequency and 16-bit resolution, and was originally specified to store up to 74 minutes of stereo audio per disc.
MiniDisc (MD) is an erasable magneto-optical disc-based data storage format offering a capacity of 60, 74, and later, 80 minutes of digitized audio.
Digital audio is a representation of sound recorded in, or converted into, digital form. In digital audio, the sound wave of the audio signal is typically encoded as numerical samples in a continuous sequence. For example, in CD audio, samples are taken 44,100 times per second, each with 16-bit resolution. Digital audio is also the name for the entire technology of sound recording and reproduction using audio signals that have been encoded in digital form. Following significant advances in digital audio technology during the 1970s and 1980s, it gradually replaced analog audio technology in many areas of audio engineering, record production and telecommunications in the 1990s and 2000s.
Digital Audio Tape is a signal recording and playback medium developed by Sony and introduced in 1987. In appearance it is similar to a Compact Cassette, using 3.81 mm / 0.15" magnetic tape enclosed in a protective shell, but is roughly half the size at 73 mm × 54 mm × 10.5 mm. The recording is digital rather than analog. DAT can record at sampling rates equal to, as well as higher and lower than a CD at 16 bits quantization. If a comparable digital source is copied without returning to the analogue domain, then the DAT will produce an exact clone, unlike other digital media such as Digital Compact Cassette or non-Hi-MD MiniDisc, both of which use a lossy data-reduction system.
Sound can be recorded and stored and played using either digital or analog techniques. Both techniques introduce errors and distortions in the sound, and these methods can be systematically compared. Musicians and listeners have argued over the superiority of digital versus analog sound recordings. Arguments for analog systems include the absence of fundamental error mechanisms which are present in digital audio systems, including aliasing and associated anti-aliasing filter implementation, jitter and quantization noise. Advocates of digital point to the high levels of performance possible with digital audio, including excellent linearity in the audible band and low levels of noise and distortion.
A CD player is an electronic device that plays audio compact discs, which are a digital optical disc data storage format. CD players were first sold to consumers in 1982. CDs typically contain recordings of audio material such as music or audiobooks. CD players may be part of home stereo systems, car audio systems, personal computers, or portable CD players such as CD boomboxes. Most CD players produce an output signal via a headphone jack or RCA jacks. To use a CD player in a home stereo system, the user connects an RCA cable from the RCA jacks to a hi-fi and loudspeakers for listening to music. To listen to music using a CD player with a headphone output jack, the user plugs headphones or earphones into the headphone jack.
A hard disk recorder (HDR) is a system that uses a high-capacity hard disk to record digital audio or digital video. Hard disk recording systems represent an alternative to reel-to-reel audio tape recording and video tape recorders, and provide non-linear editing capabilities unavailable using tape recorders. Audio HDR systems, which can be standalone or computer-based, are typically combined with provisions for digital mixing and processing of the audio signal to produce a digital audio workstation (DAW).
Mastering, a form of audio post production, is the process of preparing and transferring recorded audio from a source containing the final mix to a data storage device, the source from which all copies will be produced. In recent years, digital masters have become usual, although analog masters—such as audio tapes—are still being used by the manufacturing industry, particularly by a few engineers who specialize in analog mastering.
Digital Compact Cassette (DCC) is a magnetic tape sound recording format introduced by Philips and Matsushita Electric in late 1992 and marketed as the successor to the standard analog Compact Cassette. It was also a direct competitor to Sony's MiniDisc (MD), but neither format toppled the then-ubiquitous analog cassette despite their technical superiority, and DCC was discontinued in October 1996. Another competing format, the Digital Audio Tape (DAT), had by 1992 also failed to sell in large quantities to consumers, although it was popular as a professional digital audio storage format.
In digital recording, an audio or video signal is converted into a stream of discrete numbers representing the changes over time in air pressure for audio, or chroma and luminance values for video. This number stream is saved to a storage device. To play back a digital recording, the numbers are retrieved and converted back into their original analog audio or video forms so that they can be heard or seen.
The digital sound revolution refers to the widespread adoption of digital audio technology in the computer industry beginning in the 1980s.
A DVD recorder is an optical disc recorder that uses optical disc recording technologies to digitally record analog or digital signals onto blank writable DVD media. Such devices are available as either installable drives for computers or as standalone components for use in television studios or home theater systems.
A PCM adaptor is a device that encodes digital audio as video for recording on a videocassette recorder. The adapter also has the ability to decode a video signal back to digital audio for playback. This digital audio system was used for mastering early compact discs.
Digital audio cassette formats introduced to the professional audio and consumer markets:
Sound recording and reproduction is the electrical, mechanical, electronic, or digital inscription and re-creation of sound waves, such as spoken voice, singing, instrumental music, or sound effects. The two main classes of sound recording technology are analog recording and digital recording.
Soundstream Inc. was the first United States audiophile digital audio recording company, providing commercial services for recording and computer-based editing.
Flim & the BB's was a contemporary jazz band that was among the first bands to record albums digitally.
The history of sound recording - which has progressed in waves, driven by the invention and commercial introduction of new technologies — can be roughly divided into four main periods:
Multitrack recording of sound is the process in which sound and other electro-acoustic signals are captured on a recording medium such as magnetic tape, which is divided into two or more audio tracks that run parallel with each other. Because they are carried on the same medium, the tracks stay in perfect synchronization, while allowing multiple sound sources to be recorded at different times.