STARS-II

Last updated
STARS-II
Mission typeTechnology
Operator Kagawa University
COSPAR ID 2014-009H OOjs UI icon edit-ltr-progressive.svg
SATCAT no. 39579
Website stars.eng.shizuoka.ac.jp/english.html
Mission duration2 months
Spacecraft properties
Manufacturer Kagawa University
Launch mass9 kilograms (20 lb)
Start of mission
Launch date27 February 2014, 18:37 (2014-02-27UTC18:37Z) UTC [1]
Rocket H-IIA 202
Launch site Tanegashima Yoshinobu 1
Contractor Mitsubishi
End of mission
Decay date26 April 2014 (2014-04-27)
Orbital parameters
Reference system Geocentric
Regime Low Earth
Semi-major axis 6,745.00 kilometres (4,191.15 mi)
Eccentricity 0.00103780
Perigee altitude 367 kilometres (228 mi)
Apogee altitude 381 kilometres (237 mi)
Inclination 65 degrees
Period 92.02 minutes
Epoch 28 February 2014 [2]

Space Tethered Autonomous Robotic Satellite II or STARS-II, was a nanosatellite built by Japan's Kagawa University to test an electrodynamic tether in low Earth orbit, a follow-on to the STARS mission.

Contents

STARS-II was launched by an H-IIA rocket, flying in the 202 configuration, as a secondary payload aboard the launch of the GPM Core Observatory on 27 February 2014. After two months in orbit, STARS-II reentered the atmosphere on 26 April 2014.

Flight Plan

The satellite split into two parts, connected by a 300-metre (980 ft) tether, to conduct its experiments which consisted of recording a video of tether deployment and using the tether to deorbit the satellite. The spacecraft consisted of a 5-kilogram (11 lb) base vehicle, with dimensions of 160 by 160 by 253 millimetres (6.3 in × 6.3 in × 10.0 in) and a 4-kilogram (8.8 lb) vehicle at the end of the tether measuring 160 by 160 by 158 millimetres (6.3 in × 6.3 in × 6.2 in). [3] The electrodynamic tether was made from ultra-thin wires of stainless steel and aluminium. [4]

One objective of this program was to demonstrate possible technology for de-orbiting space debris. [5]

Results

STARS-II was successfully launched at 3:37am (JST) on 28 February 2014 (27 February UTC), and amateur radio downlink showed that it successfully separated from the carrier vehicle, however, the experiment was only partially successful, and tether deployment could not be confirmed. [6]

Initial radio data suggested that the solar arrays and antennas were not deployed. The beacon from the daughter spacecraft became weak, and after several weeks was no longer received. It was inferred that solar battery power was low due to its small body. However, the beacon from the mother spacecraft later became strong, and it was inferred that the solar arrays and antennas were deployed by restarting. However, the Command and Data Handling subsystem did not work, possibly due to radiation. [7]

The orbit decayed from 350 km to 280 km in 50 days, considerably faster than the other cubesats launched on the same mission, which is indirect indication that the tether deployed, increasing the drag. However, telescopic photography of the satellite from the ground showed the satellite as a single point, rather than two objects. The experimenters suggest that this may have been due to the tether extending, but being tangled by rebound. [7]

Follow-on

A follow-on to the STARS and STARS-II satellites, STARS-C (Space Tethered Autonomous Robotic Satellite-Cube, COSPAR 1998-067KR, SATCAT 41895 [8] ) was announced as a satellite to be launched from the Japanese Experiment Module of the International Space Station. [9] [10]

STARS-C was a 2U cubesat consisting of a mother satellite and a daughter satellite, designed to deploy a 100-m aramid fiber tether. It was launched on 9 December 2016, from J-SSOD and re-entered on 3 March 2018. [8] However, the signal quality was intermittent, possibly due to failure of deployment of the solar panel, and data on tether deployment was not obtained. Estimates from orbital drag measurements suggest that the tether deployed to a length of about 30 meters. [11]

Also other Japanese STARS satellites have been launched, like STARS-ME, [12] Stars-AO [13] and STARS-EC. [14]

See also

Related Research Articles

<span class="mw-page-title-main">CubeSat</span> Miniature satellite in 10 cm cube modules

A CubeSat is a class of small satellite with a form factor of 10 cm (3.9 in) cubes. CubeSats have a mass of no more than 2 kg (4.4 lb) per unit, and often use commercial off-the-shelf (COTS) components for their electronics and structure. CubeSats are deployed into orbit from the International Space Station, or launched as secondary payloads on a launch vehicle. As of December 2023, more than 2,300 CubeSats have been launched.

CUTE-1.7 + APD or CO-56 (Cubesat-Oscar-56) or just OSCAR 56 was an amateur radio satellite in the form of a double CubeSat. The satellite used commercial off-the-shelf components extensively, in particular, it used the Hitachi NPD-20JWL PDA as a control computer, and it used a USB hub for sensor communications. At the end of its mission, the satellite was supposed to deploy an electrodynamic tether to help it deorbit. The satellite failed early into its mission, so the electrodynamic tether experiment probably did not happen. It was launched on February 21, 2006 on board a Japanese launcher M-V.

The Space Test Program (STP) is the primary provider of spaceflight for the United States Department of Defense (DoD) space science and technology community. STP is managed by a group within the Advanced Systems and Development Directorate, a directorate of the Space and Missile Systems Center of the United States Space Force. STP provides spaceflight via the International Space Station (ISS), piggybacks, secondary payloads and dedicated launch services.

The Multi-Application Survivable Tether (MAST) experiment was an in-space investigation designed to use CubeSat spacecraft connected by tethers to better understand the survivability of tethers in space. It was launched as a secondary payload on a Dnepr rocket on 17 April 2007 into a 98°, 647 x 782 km orbit. The MAST payload incorporated three picosatellites, named "Ralph," "Ted," and "Gadget," which were intended to separate and deploy a 1 km (0.62 mi) tether. The experiment hardware was designed under a NASA Small Business Technology Transfer (STTR) collaboration between Tethers Unlimited, Inc. (TUI) and Stanford University, with TUI developing the tether, tether deployer, tether inspection subsystem, satellite avionics, and software, and Stanford students developing the satellite structures and assisting with the avionics design.

<span class="mw-page-title-main">Kagawa University</span> National university in Japan

Kagawa University is a national university in Takamatsu, Kagawa, Japan. The university was established in 1949 as a national university after the consolidation and reorganization of the Kagawa Normal School, the Kagawa Normal School for Youth and the Takamatsu College of Economics.

AeroCube-3 is a single-unit CubeSat which was built and is being operated by The Aerospace Corporation, at El Segundo, California. It is the third AeroCube picosatellite, following on from AeroCube-1, which was lost in a launch failure in 2006, and AeroCube-2 which was successfully launched in 2007 but failed immediately after launch. Compared to its predecessors it contains several improvements in its infrastructure, including a redesigned power system, replacing the older system which was responsible for the loss of AeroCube-2. Its development was funded by the United States Air Force Space and Missile Systems Center, at Los Angeles Air Force Base.

CP6, also known as CP6 CubeSat, CalPoly CP-6, PolySat-6 or PolySat CP6 is a single-unit CubeSat which was built and operated by the California Polytechnic State University (CalPoly). It was primarily intended to perform a technology demonstration mission. The main experiment consisted of sensors to determine the spacecraft's attitude. Cameras on the satellite will be used to verify the data returned by the attitude sensors.

<span class="mw-page-title-main">NanoSail-D2</span> Satellite designed to test concept of solar sails

NanoSail-D2 was a small satellite built by NASA's Marshall Space Flight Center and Ames Research Center to study the deployment of a solar sail in space. It was a three-unit CubeSat, measuring 30 cm × 10 cm × 10 cm with a mass of 4 kg (8.8 lb). Its solar sail had an area of 10 m2 (110 sq ft), and was deployed in around five seconds.

<span class="mw-page-title-main">Space tether missions</span> Space technology using tethers

A number of space tethers have been deployed in space missions. Tether satellites can be used for various purposes including research into tether propulsion, tidal stabilisation and orbital plasma dynamics.

Technology Education Satellite (TechEdSat) is a successful nano-sat flight series conducted from the NASA Ames Research Center in collaboration with numerous universities. While one of the principal aims has been to introduce young professionals and university students to the practical realm of developing space flight hardware, considerable innovations have been introduced. In addition, this evolving flight platform has tested concepts for Low Earth Orbit (LEO) sample return, as well as planetary nano-sat class mission concepts.

e-st@r

e-st@r was a miniaturised satellite built by the Politecnico di Torino. It was a 1U CubeSat design with a 10 cm side and a mass not exceeding 1.33 kg.

<span class="mw-page-title-main">ESTCube-1</span> Estonian nanosatellite

ESTCube-1 is the first Estonian satellite and first satellite in the world to attempt to use an electric solar wind sail (E-sail). It was launched on 7 May, 2013, aboard Vega VV02 carrier rocket and successfully deployed into the orbit. The CubeSat standard for nanosatellites was followed during the engineering of ESTCube-1, resulting in a 10×10×11.35 cm cube, with a volume of 1 liter and a mass of 1.048 kg.

iCube-1 was a miniaturised satellite built by the Institute of Space Technology in Pakistan. Its objective was to conduct a wide range of experiments in imaging, microgravity, biology, nanotechnology, space dynamics, chemistry, space physics and other fields. It also served as a testbed for developing satellite constellations for specific applications.

<span class="mw-page-title-main">Kounotori 6</span> 2016 Japanese resupply spaceflight to the ISS

Kounotori 6 (こうのとり6号機), also known as HTV-6, was the sixth flight of the H-II Transfer Vehicle, an uncrewed cargo spacecraft launched to resupply the International Space Station. It was launched at 13:26:47 UTC on 9 December 2016 aboard H-IIB launch vehicle from Tanegashima Space Center.

<span class="mw-page-title-main">Mars Cube One</span> 2018 Mars flyby mission

Mars Cube One was a Mars flyby mission launched on 5 May 2018 alongside NASA's InSight Mars lander. It consisted of two nanospacecraft, MarCO-A and MarCO-B, that provided real-time communications to Earth for InSight during its entry, descent, and landing (EDL) on 26 November 2018 - when InSight was out of line of sight from the Earth. Both spacecraft were 6U CubeSats designed to test miniaturized communications and navigation technologies. These were the first CubeSats to operate beyond Earth orbit, and aside from telecommunications they also tested CubeSats' endurance in deep space. On 5 February 2019, NASA reported that both the CubeSats had gone silent by 5 January 2019, and are unlikely to be heard from again. In August 2019, the CubeSats were honored for their role in the successful landing of the InSight lander on Mars.

<span class="mw-page-title-main">RemoveDEBRIS</span> Project to demonstrate various space debris removal technologies

RemoveDEBRIS was a satellite research project intending to demonstrate various space debris removal technologies. The mission was led by the Surrey Space Centre from the University of Surrey with the satellite's platform manufactured by Surrey Satellite Technology Ltd (SSTL). Partners on the project included Airbus, ArianeGroup, Swiss Center for Electronics and Microtechnology, Inria, Innovative Solutions In Space, Surrey Space Centre, and Stellenbosch University.

<span class="mw-page-title-main">Repair Satellite Prototype</span> 2018 microsatellite with two robotic arms

RSat-P is a microsatellite built by the United States Naval Academy (USNA) in Annapolis, Maryland. The small spacecraft is a 3U CubeSat intended to demonstrate capabilities for minor in-orbit repair of a much larger, conventional spacecraft.

STARS-EC was a nanosatellite developed by Shizuoka University, for the purpose of demonstrating space elevator tether technology. It was a 3U-size CubeSat, and could split into three separate satellites, connected via tethers. STARS-EC was launched on 20 February 2021, and was deployed from the International Space Station (ISS). The deployment service of STARS-EC was provided by Mitsui Bussan Aerospace.

References

  1. ↑ McDowell, Jonathan. "Launch Log". Jonathan's Space Page. Retrieved 1 January 2015.
  2. ↑ McDowell, Jonathan. "Satellite Catalog". Jonathan's Space Page. Retrieved 1 January 2015.
  3. ↑ Herbert J. Kramer, STARS-II, eoPortal (accessed 7 July 2016)
  4. ↑ Justin McCurry, Scientists in Japan to put Stars-2 satellite into orbit to trial space cleanup, The Guardian, 27 February 2014 (accessed 7 July 2016)
  5. ↑ Messier, Doug (20 January 2014). "JAXA Develops Electrodynamic Tether to De-orbit Space Debris". Parabolic Arc. Retrieved 21 January 2014.
  6. ↑ Alexander J. Boisvert. Attitude Dynamics of a Tethered CubeSat-Inflatable System in Low Earth Orbit (PDF) (Report). Georgia Institute of Technology. p. 5. Retrieved 14 May 2023.
  7. 1 2 M. Nohmi, "Initial Orbital Performance Result of Nano-Satellite STARS-II", International Symposium on Artificial Intelligence, Robotics and Automation in Space (I-SAIRAS), Montreal, Canada, 17–19 June 2014(accessed 7 July 2016)
  8. 1 2 "STARS-C". N2YO.com. 15 June 2022. Retrieved 15 June 2022.
  9. ↑ University orbiter set to lift space elevator technology THE ASAHI SHIMBUN, 6 July 2016 (accessed 7 July 2016)
  10. ↑ Alyssa Navarro, Japan's Space Elevator Technology Will Be Put To Test Soon, 7 July 2016, Tech Times (accessed 7 July 2016)
  11. ↑ Yamagiwa, Y., et al. (Dec. 2020). "Space experimental results of STARS-C CubeSat to verify tether deployment in orbit," Acta Astronautica, Vol. 177, pp. 759-770. https://doi.org/10.1016/j.actaastro.2019.12.035
  12. ↑ "STARS-ME". N2YO.com. 15 June 2022. Retrieved 15 June 2022.
  13. ↑ "STARS-AO". N2YO.com. 15 June 2022. Retrieved 15 June 2022.
  14. ↑ Krebs, Gunter D. "STARS 1, 2 (Kukai, Gennai)". Gunter's Space Page. Retrieved 15 May 2023.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.