This article needs additional citations for verification .(June 2008) |
Tweezers are small hand tools used for grasping objects too small to be easily handled with the human fingers. Tweezers are thumb-driven forceps most likely derived from tongs used to grab or hold hot objects since the dawn of recorded history. In a scientific or medical context, they are normally referred to as just "forceps", a name that is used together with other grasping surgical instruments that resemble pliers, pincers and scissors-like clamps.
Tweezers make use of two third-class levers connected at one fixed end (the fulcrum point of each lever), with the pincers at the others. When used, they are commonly held with one hand in a pen grip between the thumb and index finger (sometimes also the middle finger), with the top end resting on the first dorsal interosseous muscle at the webspace between the thumb and index finger. Spring tension holds the grasping ends apart until finger pressure is applied. This provides an extended pinch and allows the user to easily grasp, manipulate and quickly release small or delicate objects with readily variable pressure.
People commonly use tweezers for such tasks as plucking hair from the face or eyebrows, often using the term eyebrow tweezers. Other common uses for tweezers are as a tool to manipulate small objects, including for example small, particularly surface-mount, electronic parts, and small mechanical parts for models and precision mechanisms. Stamp collectors use tweezers (stamp tongs) to handle postage stamps which, while large enough to pick up by hand, could be damaged by handling; the jaws of stamp tongs are smooth. Another example of a specialized use is picking out the flakes of gold in gold panning. Tweezers are also used in kitchens for food presentation [1] to remove bones from fillets of fish in a process known as pin boning, and are as tongs used to serve pieces of cake to restaurant patrons.
Tweezers are known to have been used in predynastic Egypt. There are drawings of Egyptian craftsmen holding hot pots over ovens with a double-bow shaped tool. Asiatic tweezers, consisting of two strips of metal brazed together, were commonly used in Mesopotamia and India from about 3000 BC, perhaps for purposes such as catching lice. [2] During the Bronze Age, tweezers were manufactured in Kerma. [3]
The word tweezer comes from etwee which describes a small case that people would use to carry small objects (such as toothpicks) with them. Etwee takes its origin from French étui "small case" from the Old French verb estuier, "to hold or keep safe." Over time, the object now known as "tweezers" took on this name because the tool was commonly found in these tiny carrying cases. Eventually, the word "tweeze" was accepted as a verb in the English language.
There is evidence of Roman shipbuilders pulling nails out of construction with plier-type pincers.
Tweezers come in a variety of tip shapes and sizes. [4] Blunt tip tweezers have a rounded end which can be used when a pointed object may get entangled, when manipulating cotton swabs, for example. Flat tip tweezers, pictured at right, have an angled tip which may be used for removing splinters. Some tweezers have a long needle-like tip which may be useful for reaching into small crevices. Triangular tip tweezers have larger, wider tips useful for gripping larger objects. Tweezers with curved tips also exist, sometimes called bent forceps. Microtweezers have an extremely small, pointed tip used for manipulating tiny electronic components and the like.
There are two common forms of construction for tweezers: two fused, angled pieces of metal, or one piece of metal bent in half. The bent tweezer is cheaper to manufacture, but gives weaker grip. The fused tweezer is more expensive, but allows for a stronger grip. The width between the tips of the tweezers when no force is applied also affects how powerful the grip is.
Cross-locking tweezers (aka reverse-action tweezers or self-closing tweezers) work in the opposite way to normal tweezers. Cross-locking tweezers open when squeezed and close when released, gripping the item without any exertion of the user's fingers.
Applications:
The original tweezers for mechanical gripping have given rise to a number of tools with similar action or purpose but not dependent upon mechanical pressure, including
Other uses of the same principle are named tweezers; although such terms are not necessarily widely used their meaning is clear to people in the relevant field. E.g., Raman tweezers, which combine Raman spectroscopy with optical tweezers. [8]
A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces.
The thumb is the first digit of the hand, next to the index finger. When a person is standing in the medical anatomical position, the thumb is the outermost digit. The Medical Latin English noun for thumb is pollex, and the corresponding adjective for thumb is pollical.
Optical tweezers are scientific instruments that use a highly focused laser beam to hold and move microscopic and sub-microscopic objects like atoms, nanoparticles and droplets, in a manner similar to tweezers. If the object is held in air or vacuum without additional support, it can be called optical levitation.
Tongs are a type of tool used to grip and lift objects instead of holding them directly with hands. There are many forms of tongs adapted to their specific use. Design variations include resting points so that the working end of the tongs does not come into contact with a bench surface.
Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe. They are also useful for bending and physically compressing a wide range of materials. Generally, pliers consist of a pair of metal first-class levers joined at a fulcrum positioned closer to one end of the levers, creating short jaws on one side of the fulcrum, and longer handles on the other side. This arrangement creates a mechanical advantage, allowing the force of the grip strength to be amplified and focused on an object with precision. The jaws can also be used to manipulate objects too small or unwieldy to be manipulated with the fingers.
Forceps are a handheld, hinged instrument used for grasping and holding objects. Forceps are used when fingers are too large to grasp small objects or when many objects need to be held at one time while the hands are used to perform a task. The term "forceps" is used almost exclusively in the fields of biology and medicine. Outside biology and medicine, people usually refer to forceps as tweezers, tongs, pliers, clips or clamps.
In electronics, desoldering is the removal of solder and components from a circuit board for troubleshooting, repair, replacement, and salvage.
A handle is a part of, or attachment to, an object that allows it to be grasped and manipulated by hand. The design of each type of handle involves substantial ergonomic issues, even where these are dealt with intuitively or by following tradition. Handles for tools are an important part of their function, enabling the user to exploit the tools to maximum effect. Package handles allow for convenient carrying of packages.
A surgical instrument is a medical device for performing specific actions or carrying out desired effects during a surgery or operation, such as modifying biological tissue, or to provide access for viewing it. Over time, many different kinds of surgical instruments and tools have been invented. Some surgical instruments are designed for general use in all sorts of surgeries, while others are designed for only certain specialties or specific procedures.
In cooking, a chef's knife, also known as a cook's knife, is a cutting tool used in food preparation. The chef's knife was originally designed primarily to slice and disjoint large cuts of beef. Today it is the primary general-utility knife for most Western cooks.
Stamp tongs are tweezers used to handle postage stamps. They are used by stamp collectors and philatelists, because they are a reliable way to hold and move stamps without damaging or getting skin oils on them. The jaws of stamp tongs are smooth in contrast to the striated jaws of the type of tweezers one might use to grasp and pull a thorn; such tweezers will damage stamps. They can also be an efficient way to handle a small stack of stamps.
Dental instruments are tools that dental professionals use to provide dental treatment. They include tools to examine, manipulate, treat, restore, and remove teeth and surrounding oral structures.
A needle holder, also called needle driver or needle forceps, is a surgical instrument similar to a hemostat, used by doctors and surgeons to hold and push a suturing needle when performing wound closure, ligation and other surgical procedures that require re-anastomosis.
A soldering station is a multipurpose power soldering device designed for electronic components soldering. This type of equipment is mostly used in electronics and electrical engineering. Soldering station consists of one or more soldering tools connected to the main unit, which includes the controls, means of indication, and may be equipped with an electric transformer. Soldering stations may include some accessories – holders and stands, soldering tip cleaners, etc.
In robotics, an end effector is the device at the end of a robotic arm, designed to interact with the environment. The exact nature of this device depends on the application of the robot.
Soldering is a process of joining two metal surfaces together using a filler metal called solder. The soldering process involves heating the surfaces to be joined and melting the solder, which is then allowed to cool and solidify, creating a strong and durable joint.
Fine motor skill is the coordination of small muscles in movement with the eyes, hands and fingers. The complex levels of manual dexterity that humans exhibit can be related to the nervous system. Fine motor skills aid in the growth of intelligence and develop continuously throughout the stages of human development.
Tony Jun Huang is the William Bevan Distinguished Professor of Mechanical Engineering and Materials Science at Duke University.
This glossary of nanotechnology is a list of definitions of terms and concepts relevant to nanotechnology, its sub-disciplines, and related fields.
The "Scope" soldering iron is a tool for soldering with lead-tin alloys, made in Australia since 1950, and intended for occasional or intermittent use. It has the virtue of quickly coming up to soldering temperature (~300C) and delivering considerable heat to a small area, but requires care to avoid overheating. It operates on low voltage and high current from a battery or suitable transformer, so is by design electrically safe, and as it cools down rapidly when it leaves the operator's hand, should not constitute a fire risk.