Scissors

Last updated

A pair of standard scissors Standard household scissors.jpg
A pair of standard scissors

Scissors are hand-operated shearing tools. A pair of scissors consists of a pair of blades pivoted so that the sharpened edges slide against each other when the handles (bows) opposite to the pivot are closed. Scissors are used for cutting various thin materials, such as paper, cardboard, metal foil, cloth, rope, and wire. A large variety of scissors and shears all exist for specialized purposes. Hair-cutting shears and kitchen shears are functionally equivalent to scissors, but the larger implements tend to be called shears. Hair-cutting shears have specific blade angles ideal for cutting hair. Using the incorrect type of scissors to cut hair will result in increased damage or split ends, or both, by breaking the hair. Kitchen shears, also known as kitchen scissors, are intended for cutting and trimming foods such as meats.

Contents

Inexpensive, mass-produced modern scissors are often designed ergonomically with composite thermoplastic and rubber handles.

Terminology

The noun scissors is treated as a plural noun, and therefore takes a plural verb (e.g., these scissors are). [1] Alternatively, the tool is referred to by the singular phrase a pair of scissors. [2] The word shears is used to describe similar instruments that are larger in size and for heavier cutting. [3]

History

Han dynasty scissors Yi Dai Jian Dao .jpg
Han dynasty scissors
These shears are thought to date to the 2nd century AD and come from a Roman settlement in Trabzon, Turkey. The style of the "Egyptianizing" metal inlay designs suggests that they were made to imitate actual Egyptian art. When closed, the dog and cat figures at the tips come face to face. Shears MET 29I E08R4.jpg
These shears are thought to date to the 2nd century AD and come from a Roman settlement in Trabzon, Turkey. The style of the "Egyptianizing" metal inlay designs suggests that they were made to imitate actual Egyptian art. When closed, the dog and cat figures at the tips come face to face.

The earliest known scissors appeared in Mesopotamia 3,000 to 4,000 years ago. These were of the 'spring scissor' type comprising two bronze blades connected at the handles by a thin, flexible strip of curved bronze which served to hold the blades in alignment, to allow them to be squeezed together, and to pull them apart when released. [5]

Spring scissors continued to be used in Europe until the 16th century. However, pivoted scissors of bronze or iron, in which the blades were pivoted at a point between the tips and the handles, the direct ancestor of modern scissors, were invented by the Romans around 100 AD. [6] They entered common use in not only ancient Rome, but also China, Japan, and Korea, and the idea is still used in almost all modern scissors.

Early manufacture

During the Middle Ages and Renaissance, spring scissors were made by heating a bar of iron or steel, then flattening and shaping its ends into blades on an anvil. The center of the bar was heated, bent to form the spring, then cooled and reheated to make it flexible.

The Hangzhou Zhang Xiaoquan Company in Hangzhou, China, has been manufacturing scissors since 1663. [7]

William Whiteley & Sons (Sheffield) Ltd. was producing scissors by 1760, although it is believed the business began trading even earlier. The first trade-mark, 332, was granted in 1791. [8] The company is still manufacturing scissors today, and is the oldest company in the West to do so.

Pivoted scissors were not manufactured in large numbers until 1761, when Robert Hinchliffe of Sheffield produced the first pair of modern-day scissors made of hardened and polished cast steel. His major challenge was to form the bows; first, he made them solid, then drilled a hole, and then filed away metal to make this large enough to admit the user's fingers. This process was laborious, and apparently Hinchliffe improved upon it in order to increase production. Hinchliffe lived in Cheney Square (now the site of Sheffield Town Hall), and set up a sign identifying himself as a "fine scissor manufacturer". He achieved strong sales in London and elsewhere. [9]

During the 19th century, scissors were hand-forged with elaborately decorated handles. They were made by hammering steel on indented surfaces known as 'bosses' to form the blades. The rings in the handles, known as bows, were made by punching a hole in the steel and enlarging it with the pointed end of an anvil.

In 1649, in Swedish-ruled Finland, an ironworks was founded in the village of Fiskars between Helsinki and Turku. In 1830, a new owner started the first cutlery works in Finland, making, among other items, scissors with the Fiskars trademark.

Modern manufacturing regions

China

The vast majority of global scissor manufacturing takes place in China. As of 2019, China was responsible for 64.3% of worldwide scissors exports. When combined with Chinese Taipei exports, this rises to 68.3%. [10] The primary scissors producing region in China is in Guandong Province.

The Hangzhou Zhang Xiaoquan Company, founded in 1663, is one of the oldest continuously operating scissor manufacturers in the world. The company was nationalized in 1958 and now employs 1500 people who annually mass-produce an estimated seven million pairs of inexpensive scissors that retail for an average of US$4 each. [11]

France

In the late 14th century, the English word "scissors" came into usage. It was derived from the Old French word cisoires, which referred to shears. [12]

There are several historically important scissor-producing regions in France: Haute-Marne in Nogent-en Bassigny, Châtellereault, Thiers and Rouen. [13] These towns, like many other scissor-producing communities, began with sabre, sword and bayonet production, which transitioned to scissors and other blades in the late 18th and early 19th centuries. [14]

Thiers, in the Puy-de-Dôme department of Auvergne, remains an important centre of scissor and cutlery production. It is home to both the Musée de la Coutellerie, which showcases the town's 800-year history of blade-making, [15] as well as Coutellia, an industry tradeshow that advertises itself as one of the largest annual gatherings of artisanal blade-makers in the world.

Germany

Germany was responsible for manufacturing just under 7% of global scissors exports in 2019. [16] Often called "The City of Blades", Solingen, in North Rhine-Westphalia, has been a center for the manufacturing of scissors since medieval times. At the end of the 18th century it's estimated that there were over 300 scissorsmiths in Solingen. [17]

In 1995 the City of Solingen passed The Solingen Ordinance, an update to a 1930s law that decreed "Made in Solingen" stamps could only be applied to products almost entirely manufactured in the old industrial area of Solingen. In 2019 this applied to approximately 150 companies making high-quality blades of all kinds, including scissors. [18]

Friedrich Herder, founded in Solingen in 1727, is one of the oldest scissors manufacturers still operating in Germany. [19]

Italy

Classic Italian-style kitchen scissors, often used to cut food. The two halves can be detached in order to be cleaned. Detatchable kitchen.jpg
Classic Italian-style kitchen scissors, often used to cut food. The two halves can be detached in order to be cleaned.

Premana, in Lecco Province, has its origins in ironworks and knife manufacturing beginning in the 16th century. In 1900 there were ten scissor manufacturing workshops, 20 in 1952 and 48 by 1960. [20] Today, Consorzio Premax, an industrial partnership, organizes over 60 local companies involved in the manufacture of scissors for global markets. [21] In 2019 Italy exported 3.5% of scissors manufactured globally. [22]

One of the oldest Premanese scissor manufacturing firms still in operation is Sanelli Ambrogio, which was founded in 1869. [23]

Japan

Scissormaking in Japan evolved from sword making in the 14th century. [24] Seki, in Gifu Prefecture, was a renowned center of swordmaking beginning in the 1200s. After citizens were no longer permitted to carry swords, the city's blacksmiths turned to making scissors and knives. [25] There are many specialized types of Japanese scissors, but sewing scissors were introduced by American Commodore Matthew Perry from the United States in 1854. [26]

The Sasuke workshop in Sakai City south of Osaka is run by Yasuhiro Hirakawa, a 5th generation scissorsmith. The company has been in operation since 1867. [27] Yasuhiro Hirakawa is the last traditional scissormaker in Japan, making scissors in the traditional style where the blades are believed to be thinner, lighter and sharper than European scissors. [28] In 2018 he was profiled in a documentary that featured a pair of his bonsai snips which retailed for US$35,000. [29]

Spain

In Solsona, Spain, scissor manufacturing began in the 16th century. At the industry's peak in the 18th century there were 24 workshops, organized as the Guild of Saint Eligius, the patron saint of knife makers. [30] By the mid-1980s there were only two, and by 2021, Pallarès Solsona, founded in 1917 by Lluìs and Carles Pallarès Canal, and still family-operated, was the town's sole remaining artisanal scissor manufacturer. [31]

United Kingdom

Sheffield was home to the first mass production of scissors beginning in 1761. By the 19th century there were an estimated 60 steel scissor companies in Sheffield. However, since the 1980s, industry globalization and a shift towards cheaper, mass-produced scissors created price deflation that many artisanal manufacturers could not compete with. The Sheffield scissor industry consisted of just two local companies in 2021. [32]

The two remaining Sheffield scissor manufacturers are William Whiteley, founded in 1760, [33] and Ernest Wright, which was established in 1902. Both now focus on high-end/niche crafting of "products for life" rather than mass production. [34] Between these two firms it is estimated that there are no more than ten "putter-togetherers" or "putters" who are the master-trained craftspeople responsible for high quality Sheffield scissor assembly. [35] In 2020, Ernest Wright was recognized with the Award for Endangered Crafts by the British Heritage Crafts Association. [36]

Description and operation

A pair of scissors consists of two pivoted blades. In lower-quality scissors, the cutting edges are not particularly sharp; it is primarily the shearing action between the two blades that cuts the material. In high-quality scissors, the blades can be both extremely sharp, and tension sprung – to increase the cutting and shearing tension only at the exact point where the blades meet. The hand movement (pushing with the thumb, pulling with the fingers) can add to this tension. An ideal example is in high-quality tailor's scissors or shears, which need to be able to perfectly cut (and not simply tear apart) delicate cloths such as chiffon and silk.

Children's scissors are usually not particularly sharp, and the tips of the blades are often blunted or 'rounded' for safety.

Mechanically, scissors are a first-class double-lever with the pivot acting as the fulcrum. For cutting thick or heavy material, the mechanical advantage of a lever can be exploited by placing the material to be cut as close to the fulcrum as possible. For example, if the applied force (at the handles) is twice as far away from the fulcrum as the cutting location (i.e., the point of contact between the blades), the force at the cutting location is twice that of the applied force at the handles. Scissors cut material by applying at the cutting location a local shear stress which exceeds the material's shear strength.

Some scissors have an appendage, called a finger brace or finger tang, below the index finger hole for the middle finger to rest on to provide for better control and more power in precision cutting. A finger tang can be found on many quality scissors (including inexpensive ones) and especially on scissors for cutting hair (see hair scissors pictured below). In hair cutting, some claim the ring finger is inserted where some place their index finger, and the little finger rests on the finger tang.

For people who do not have the use of their hands, there are specially designed foot-operated scissors. Some quadriplegics can use a motorized mouth-operated style of scissor.

Right-handed and left-handed scissors

Left-handed (left) and right-handed (right) sidebent scissors RH-LH sidebents.jpg
Left-handed (left) and right-handed (right) sidebent scissors

Most scissors are best suited for use with the right hand, but left-handed scissors are designed for use with the left hand. Because scissors have overlapping blades, they are not symmetric. This asymmetry is true regardless of the orientation and shape of the handles and blades: the blade that is on top always forms the same diagonal regardless of orientation. Human hands are asymmetric, and when closing the scissors the thumb and fingers do not close vertically, but have a lateral component to the motion. Specifically, the thumb pushes out from the palm and the fingers pull inwards. For right-handed scissors held in the right hand, the thumb blade is closer to the user's body, so that the natural tendency of the right hand is to push the cutting blades together. Conversely, if right-handed scissors are held in the left hand, the natural tendency of the left hand would be to push the cutting blades apart. Furthermore, with right-handed scissors held by the right hand, the shearing edge is visible, but when they are used with the left hand, the cutting edge of the scissors is behind the top blade, and the cutter cannot see what is being cut.

There are two varieties of left-handed scissors. Many common left-handed scissors (often called "semi"-left-handed scissors) simply have reversed finger grips. The blades open and close as with right-handed scissors, so that users tend to pull the blades apart as they are cutting. This can be challenging for craftspeople as the blades still obscure the cut. "True" left-handed scissors have both reversed finger grips and reversed blade layout, like mirror images of right-handed scissors. [37] A left-handed person accustomed to using semi-left handed scissors may find using true left-handed scissors difficult at first, as they may have learned to rely heavily on the strength of their thumb to pull the blades apart vs. pushing the blades together in order to cut. [38]

Some scissors are marketed as ambidextrous. These have symmetric handles so there is no distinction between the thumb and finger handles, and have very strong pivots so that the blades rotate without any lateral give. However, most "ambidextrous" scissors are in fact still right-handed in that the upper blade is on the right, and hence is on the outside when held in the right hand. Even if they cut successfully, the blade orientation will block the view of the cutting line for a left-handed person. True ambidextrous scissors are possible if the blades are double-edged and one handle is swung all the way around (to almost 360 degrees) so that what were the backs of the blades become the new cutting edges. U.S. patent 3,978,584 was awarded for true ambidextrous scissors.

Specialized scissors and shears

Specialized scissors and shears include:

Gardening, agriculture and animal husbandry

TypeImageDescription/purpose
Hedge trimmers Taille haie.jpg for trimming hedges
Grass shears Gardena-Grasschere klassisch.jpg for trimming grass
Averruncators Averruncator.png for trimming high branches
Pruning shears or secateurs Secateur ouvert.jpg for trimming small branches
Loppers Astschere.jpg for cutting through large branches
Blade shears BladeShears.jpg for cutting an animal's fleece to harvest wool

Food and drug

TypeImageDescription/purpose
Kitchen scissors or kitchen shears Kitchen scissors.jpg For food preparation and other purposes. Usually made from stainless steel for hygiene and rust-resistance. May have additional kitchen functionality in the handles, such as bottle-cap remover, fish scaler, nutcracker.
Poultry shears Gefligelscheier.jpg to cut poultry
Cigar cutter Cigar cutter.JPG specialized scissors with concave blade edges to cut cigars

Grooming

TypeImageDescription/purpose
Hair-cutting shears Hair Cutting Scissors.jpg for trimming hair
Thinning shears Modellierschere.jpg for thinning thick hair to avoid a bushy look
Hair clippers Manual hair clippers.JPG Used by barbers, hairdressers, and pet groomers for cutting hair
Nail scissors Nagelschere.jpg for cutting finger- and toenails
Moustache scissorsfor trimming moustaches
Nose scissors Nose scissors.jpg small scissors for nostril and ear hair, blunt-ended to protect the sensitive interior of the nose and ears

Metalwork

TypeImageDescription/purpose
Snips Combination snips.png for cutting through sheet metal
Tin, or tinner, snips Tin snips.jpg
Compound action snips Cortachapa.png
Pipe and duct snips
Hydraulic cutters Extrication cutter 1.jpg for cutting heavy sheet metal, often in traffic collisions. Sometimes referred to by the genericized trademark "Jaws of Life".
Throatless shears ThroatlessShear.jpg for cutting complex shapes in sheet metal

Medical

TypeImageDescription/purpose
Trauma shears, or "tuff cuts" Aa trauma shears.jpg for use in emergency medical response and rescue to cut off clothing. The rounded tips are designed to slide across skin without causing injury.
Dissection scissorsfor cutting flesh in dissection
Surgical scissors Mayo scissors 02.jpg for cutting flesh in surgery
Suture scissors Suture scissors on gray.png for cutting sutures, the hook lifts the suture
Iris scissors for ophthalmic surgery
Metzenbaum scissors Metzenbaum scissors.jpg for delicate surgery
Tenotomy scissors Tenotomy scissors.jpg for delicate surgery
Mayo scissors Mayo surgical scissors.jpg often for cutting fascia
Bandage scissors Bandage Scissors.JPG for cutting bandages

Ceremonial

TypeImageDescription/purpose
Ceremonial scissors Joshua Kent, with the help of Col. Jay Silveria cut the ribbon and Carlos Mencia Kid Rock and Jessie James cut the ribbon to open new fitness stations at RAF Lakenheath.jpg giant scissors used for ceremonial ribbon-cutting events

Sewing and clothes-making

TypeImageDescription/purpose
All purpose, or Crafting scissors Paper trimmers.jpg With long blades and pointed tips, designed to cut long, straight, smooth cuts in a variety of materials, and to get into small areas with the tips. In sewing applications they are primarily used for non-fabric cutting applications, such as cutting out paper patterns.
Applique scissors An offset handle and paddle-shaped blade pushes away the bottom layer of fabric, for controlled cuts close the stitching. Designed to cut/trim close to the fabric while protecting it from damage, and used for appliqué work and rug-making.
Button hole scissors Forbici da occhielli.jpg Adjustable, short-bladed, heavy-duty scissors for opening button holes.
Dress-maker's shears Tailors shears LH.jpg Dressmaker's shears have a long blade, typically 7–10 in (18–25 cm), for cutting out fabric. Blades are tapered, with one pointed and one rounded tip; the blunt tip prevents fabric from snagging on seams and threads. Blades have a "knife edge": the top blade is set at an acute angle which allows the scissors to cut through fabric easily. Heavier-duty than general scissors, the bottom blade sits flush on the table, making it easier to cut accurately through fabric. This photo is of a left-handed pair of shears.
Embroidery scissors Embroidery scissors2022.jpg Small scissors which have fine sharp pointed tips, designed to get close to the fabric to effectively snip threads without damaging the material. Embroidery scissors may be elaborately decorated.
Pinking shears Zackenschere.jpg for cutting cloth leaving a sawtooth edge, so that the fabric does not fray.
Sewing chatelaine scissors Chatelaine is a French term meaning 'mistress of a castle, chateau or stately home' that dates back to the Middle Ages. It became used in English to refer to an ornamental clasp or hook from which chains were hung from the waist, holding perhaps, a purse, watch, keys, scissors or thimble case. The sewing chatelaine became a popular ornamental appendage worn by Victorian ladies at their waist, but disappeared when fashion changed and skirts were no longer full and long. Sewing chatelaines are now produced and worn as pendants around the neck.
Tailor's scissors Schere 18-19 Jh.jpg Designed to cut through heavy-duty materials such as leather, or multiple layers of fabric. Typically with thick blades about 5 in (13 cm) long, with precision-ground knife-edges which cut all the way to the tip.

Due to their ubiquity across cultures and classes, scissors have numerous representations across world culture.

Art

Numerous art forms worldwide enlist scissors as a tool/material with which to accomplish the art. For cases where scissors appear in or are represented by the final art product, see Commons:Category:Scissors in art .

Film

Games

Literature

Heinrich Hoffmann's 1845 children's book Struwwelpeter includes Die Geschichte vom Daumenlutscher ("The Story of the Thumb-Sucker") in which a child continues to suck his thumbs despite his mother's warnings about The Great Tall Scissorman.

Augusten Burroughs' 2002 memoir Running with Scissors spent eight weeks on the New York Times best seller list. The book was later adapted into a film.

Music

Proverbs

Proverbs about scissors are found in many language communities.

Sport

The term 'scissor kick' may be found in several sports, including:

Superstition

Scissors have a widespread place in cultural superstitions. In many cases, the details of the superstition may be specific to a given country, region, tribe, religion or even situation.

Science

Scissors have been used in the sciences for various purposes, including descriptions of animals or natural features.

Nature

Animals named after scissors include:

See also

Related Research Articles

<span class="mw-page-title-main">Pinking shears</span> Scissors that produce a zigzag pattern

Pinking shears are scissors with saw-toothed instead of straight blades. They produce a zigzag pattern instead of a straight edge.

<span class="mw-page-title-main">Scalpel</span> Sharp bladed instrument used for surgery

A scalpel, lancet, or bistoury is a small and extremely sharp bladed instrument used for surgery, anatomical dissection, podiatry and various handicrafts. A lancet is a double-edged scalpel.

<span class="mw-page-title-main">Pliers</span> Hand tool

Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe. They are also useful for bending and physically compressing a wide range of materials. Generally, pliers consist of a pair of metal first-class levers joined at a fulcrum positioned closer to one end of the levers, creating short jaws on one side of the fulcrum, and longer handles on the other side. This arrangement creates a mechanical advantage, allowing the force of the grip strength to be amplified and focused on an object with precision. The jaws can also be used to manipulate objects too small or unwieldy to be manipulated with the fingers.

<span class="mw-page-title-main">Forceps</span> Handheld, hinged instrument used for grasping and holding objects

Forceps are a handheld, hinged instrument used for grasping and holding objects. Forceps are used when fingers are too large to grasp small objects or when many objects need to be held at one time while the hands are used to perform a task. The term "forceps" is used almost exclusively in the fields of biology and medicine. Outside biology and medicine, people usually refer to forceps as tweezers, tongs, pliers, clips or clamps.

<span class="mw-page-title-main">Pocketknife</span> Knife that can be carried in a pocket

A pocketknife is a knife with one or more blades that fold into the handle. They are also known as jackknives (jack-knife), folding knives, EDC knife, or may be referred to as a penknife, though a penknife may also be a specific kind of pocketknife. A typical blade length is 5 to 15 centimetres.

<span class="mw-page-title-main">Cardistry</span> Performance art

Cardistry is the performance art of card flourishing. Unlike card magic, cardistry is meant to be visually impressive and appear very hard to execute.

<span class="mw-page-title-main">Surgical instrument</span> Tools designed for use during surgery

A surgical instrument is a medical device for performing specific actions or carrying out desired effects during a surgery or operation, such as modifying biological tissue, or to provide access for viewing it. Over time, many different kinds of surgical instruments and tools have been invented. Some surgical instruments are designed for general use in all sorts of surgeries, while others are designed for only certain specialties or specific procedures.

<span class="mw-page-title-main">Straight razor</span> Knife used to remove body hair

A straight razor is a razor with a blade that can fold into its handle. They are also called open razors and cut-throat razors. The predecessors of the modern straight razors include bronze razors, with cutting edges and fixed handles, produced by craftsmen from Ancient Egypt during the New Kingdom. Solid gold and copper razors were also found in Ancient Egyptian tombs dating back to the 4th millennium BC.

<span class="mw-page-title-main">Hair clipper</span> Personal grooming tool

A hair clipper, often individually called the apparent plurale tantumhair clippers, is a specialised tool used to cut human hair. Hair clippers work on the same principle as scissors, but are distinct from scissors themselves and razors. Similar but heavier-duty implements are used to shear sheep, but are called handpieces or machine shears.

<span class="mw-page-title-main">Paper cutter</span>

A paper cutter, also known as a paper guillotine or simply a guillotine, is a tool often found in offices and classrooms. It is designed to administer straight cuts to single sheets or large stacks of paper at once.

Snips, also known as shears, are hand tools used to cut sheet metal and other tough webs. It is a cutting tool. Workers use various types of snips, with the cutting edges being straight or curved to various degrees. The style of edge employed will depend if a straight sheer or some type of shapes cut is necessary. There are two broad categories: tinner's snips, which are similar to common scissors, and compound-action snips, which use a compound leverage handle system to increase the mechanical advantage.

<span class="mw-page-title-main">Loppers</span> Tool for pruning twigs and branches

Loppers are a type of scissors used for pruning twigs and small branches, like pruning shears with very long handles. They are the largest type of manual garden cutting tool.

<span class="mw-page-title-main">Pruning shears</span> Type of scissors for use with plants

Pruning shears, also called hand pruners, or secateurs, are a type of scissors used for plants. They are strong enough to prune hard branches of trees and shrubs, sometimes up to two centimetres thick. They are used in gardening, arboriculture, plant nursery works, farming, flower arranging, and nature conservation, where fine-scale habitat management is required. They are typically manually powered, although electric versions are available.

<span class="mw-page-title-main">Bandage scissors</span> Scissors that often have an angled tip with a blunt tip on the bottom blade

Bandage scissors, or bandage forceps, are scissors that often have an angled tip with a blunt tip on the bottom blade. This helps in cutting bandages without gouging the skin. Lister bandage scissors and utility bandage scissors exhibit the well known angle, while Knowles bandage scissors have blades that are either straight or curved.

There are many types of shears used to shear or cut sheet metal.

Surgical scissors are scissors specially manufactured as surgical instruments, typically used for cutting sutures, dressings, and cutting and dissecting biological tissue. Surgical scissors are usually made of surgical steel. Some have tungsten carbide reinforcements along their cutting edges, the hardness of which allows manufacturers to create sharper and more durable edges.

<span class="mw-page-title-main">Mayo scissors</span> Surgical instrument

Mayo scissors are a type of surgical scissor, often used in the cutting of fascia.

<span class="mw-page-title-main">Regular haircut</span> Simple hairstyle popular among males

A regularhaircut in Western fashion is a men's and boys' hairstyle featuring hair long enough to comb on top, with a defined or deconstructed side part, and back and sides that vary in length from short, semi-short, medium, long, to extra long. The style is also known by other names including taper cut, regular taper cut, side-part and standard haircut; as well as short back and sides, business-man cut and professional cut, subject to varying national, regional, and local interpretations of the specific taper for the back and sides.

<span class="mw-page-title-main">Hair-cutting shears</span>

Hair-cutting shears are scissors that are specifically designed for cutting hair. They are also known as barber shears, hairdressing shears, or hair shears. They range in size from about 5 to 7 inches long and commonly have an appendage, known as a finger brace or tang, attached to one of the finger rings. This gives the user additional control when cutting. A swiveling thumb ring is new technology in shear design. The swivel shear offers increased flexibility and the ability to keep the wrist straight and the elbow down in all cutting positions, creating more comfort and control.

<span class="mw-page-title-main">Blade shearing</span> Sheep husbandry practice

Blade shearing or hand shearing is the style of shearing sheep and other animals with fibrous coats with a set of specialized scissors. It is practiced in many parts of the world as both an occupation and a sport. Commercial blade shearers shear on average 140 sheep in an 8-hour working day, but some will shear over 200 sheep in a day.

References

  1. "Definition of SCISSORS". Merriam-Webster. Retrieved 2023-04-27.
  2. "Definition of SHEAR". Merriam-Webster. Retrieved 2023-04-27.
  3. "pair of scissors". Collins Dictionary . Retrieved April 27, 2023.
  4. "Shears: Roman Period". Metropolitan Museum . n.d. Archived from the original on 2018-07-18. Retrieved 2018-07-18.
  5. "History 101: Scissors". Daily Kos. Archived from the original on 2022-04-09. Retrieved 2022-02-28.
  6. Zoom Inventors and Inventions Archived 2017-09-10 at the Wayback Machine . Enchanted Learning. Retrieved 2010-11-05.
  7. Sudworth, John (2013-04-22). "The scissor-maker that has cut through Chinese history". BBC News. Archived from the original on 2018-05-05. Retrieved 2018-07-21.
  8. "History". William Whiteley & Sons. Archived from the original on 2014-12-08. Retrieved 2015-01-20.
  9. Leader, Robert Eadon (1901). [Reminiscences of] Sheffield in the Eighteenth Century. Sheffield: The Sheffield Independent Press Limited. pp. 69–70.
  10. The Observatory of Economy Complexity, trade data for scissors as of 2019 Archived 2022-01-06 at the Wayback Machine . Retrieved 11/29/21.
  11. Sudworth, John (2013-04-22) "The Scissor Maker that has cut through Chinese history" Archived 2018-05-05 at the Wayback Machine , BBC World. Retrieved 11/29/21
  12. (2014-11-03) "History 101: Scissors" Archived 2022-01-06 at the Wayback Machine , Daily KOS. Retrieved 12-04-21
  13. "Re-editions of Vintage Scissors" Archived 2022-01-06 at the Wayback Machine , Sajou Blog. Retrieved 01-06-22
  14. Official Website for Tourism in Champagne-Ardenne Archived 2022-01-06 at the Wayback Machine . Retrieved 01-06-22
  15. Alastair (2020-01-12) "Thiers: Cutlery Capital of France" Archived 2022-01-06 at the Wayback Machine . Mechtravller. Retrieved 01-06-22
  16. The Observatory of Economy Complexity, trade data for scissors as of 2019. Archived 2022-01-06 at the Wayback Machine Retrieved 12/04/21.
  17. Zautor, Capital (2019-04-13) "How the Knife Makers from Solingen Survived" Archived 2022-01-06 at the Wayback Machine . Retrieved 12/04/21
  18. Zautor, Capital (2019-04-13) "How the Knife Makers from Solingen Survived" Archived 2022-01-06 at the Wayback Machine . Retrieved 12/04/21
  19. Friedrich Herder: Company History. Archived 2022-01-06 at the Wayback Machine Retrieved 12/04/21
  20. Municipality of Premana: Economy. Archived 2022-01-07 at the Wayback Machine Retrieved 11/27/21.
  21. Ecco Lecco Tourist Guide to Lecco Province: Premana. Archived 2022-01-07 at the Wayback Machine Retrieved 11/27/21.
  22. The Observatory of Economy Complexity, trade data for scissors as of 2019. Archived 2022-01-06 at the Wayback Machine Retrieved 12/04/21.
  23. Ambrogio Sanelli: Company History. Archived 2021-05-10 at the Wayback Machine Retrieved 11/27/21.
  24. Sibert, Jake (2018-09-19) "See Why This Pair of Scissors Costs $35,000 USD" Archived 2022-01-06 at the Wayback Machine , HypeBeast Great Big Story. Retrieved 12-04-21.
  25. Visit Seki Official Guide, Gifu Prefecture. Archived 2022-01-06 at the Wayback Machine Retrieved 12/04/21
  26. Kitajima Y., Kito K., Migaki M., Matsumuro K., Murata Y., Hamada H. (2015) Process Analysis of Manufacturing of Sewing Scissors by All Forging Process and Understanding of Its Sharpness. In: Duffy V. (eds) Digital Human Modeling. Applications in Health, Safety, Ergonomics and Risk Management: Human Modeling. Archived 2022-04-09 at the Wayback Machine DHM 2015. Lecture Notes in Computer Science, vol 9184. Springer, Cham.
  27. Ken (2019-12-27), "Sasuke: Witness the Art of Japanese Blacksmithing in Osaka" Archived 2022-01-06 at the Wayback Machine , Matcha Japan. Retrieved 12/04/21.
  28. Kazue (2021-04-19) "Discovering Quality Japanese Scissors and Knives" Archived 2022-01-06 at the Wayback Machine . Retrieved 12-04-21
  29. Sibert, Jake (2018-09-19) "See Why This Pair of Scissors Costs $35,000 USD" Archived 2022-01-06 at the Wayback Machine , HypeBeast Great Big Story. Retrieved 12-04-21
  30. Pallarès Solsona: Company History. Archived 2022-01-06 at the Wayback Machine Retrieved 11/27/21.
  31. "The Makers: Carving a Place in History" Archived 2022-01-06 at the Wayback Machine , Reste Journal. Retrieved 11/27/21
  32. Scissor-Making: Red List of Endangered Crafts Archived 2022-01-06 at the Wayback Machine , British Heritage Crafts Association. Retrieved 11/27/21
  33. William Whiteley: Heritage. Archived 2022-01-06 at the Wayback Machine Retrieved 12/04/21
  34. Floyd, Charlie (2021-04-04) "Why Ernest Wright Scissors are so expensive" Archived 2022-01-07 at the Wayback Machine . Business Insider. Retrieved 11/27/21
  35. Scissor-Making: Red List of Endangered Crafts Archived 2022-01-06 at the Wayback Machine , British Heritage Crafts Association. Retrieved 11/27/21
  36. Carpenter, Daniel (2020-10-08), "Winners of the 2020 Heritage Crafts Awards" Archived 2022-01-06 at the Wayback Machine . Retrieved 11/27/21
  37. "What's the Difference Between Right- and Left-Handed Scissors?" Kim Griffin, Griffin Occupational Therapy Blog. https://www.griffinot.com/difference-left-handed-scissors/ Archived 2021-11-27 at the Wayback Machine , retrieved 11/27/21
  38. "Do You Know – Left-Handed Scissors" Olive Branch Educators, https://www.obeducators.com/reflections/do-you-know-left-handed-scissors Archived 2021-11-27 at the Wayback Machine , retrieved 11/27/21
  39. "Paper Mario: The Origami King Wiki Guide: Bowser's Castle". IGN . 2020-08-20. Archived from the original on 2022-03-10. Retrieved 2022-04-09.
  40. p. 527. Mieder, Wolfgang, Stewart Kingsbury, Kelsie Harder. 1992. A Dictionary of American Proverbs. Oxford University Press.
  41. p. 50. Christy, Robert. Proverbs, Maxims and Phrases of All Ages, Volume 1. Putnam. 1889.
  42. p. 28. Bărbulescu, Elena. "Constructing Gender in Romanian Proverbs." Studia Universitatis Babeş-Bolyai-Historia 57, no. Special (2012): 21-33.
  43. p. 22, Vargha, Katalin, and Anna T. Litovkina. "Punning in Hungarian anti-proverbs." The European Journal of Humour Research 1, no. 3 (2013): 15-25.
  44. p. 445. Carr, Mark William.Sanskrit Proverbs. Asian Educational Services, 1999.
  45. p. 333, Perangin-Angin, Dalan M., and Novita Dewi. "A study of Pagu proverbs: Saving an endangered language of North Halmahera." Indonesian Journal of Applied Linguistics 10, no. 2 (2020): 327-339.
  46. p. 56, Gabel, Marie. "Proverbs of Volga German settlers in Ellis County." Heritage of Kansas v.9 no.2-3:55-59, (2012).
  47. Radford, Edwin; Radford, Mona A. (October 2004). Encyclopedia of Superstitions 1949 – Edwin Radford, Mona A. Radford – Google Boeken. Kessinger. ISBN   9781417976553. Archived from the original on 2022-04-09. Retrieved 2012-02-28.
  48. Fairies and Elves By Shannon Knudsen p.27
  49. Hearn, Lafcadio (1886). "New Orleans Superstitions". Internet Sacred Text Archive. Archived from the original on 2012-01-27. Retrieved 2012-02-28.
  50. "Scissortail – Rasbora trilineata". Aquaticcommunity. Archived from the original on 2012-03-18. Retrieved 2012-02-28.
  51. Mike. "Scissor Tail Rasbora Care (Rasbora trilineata)". FishLore. Archived from the original on 2017-04-28. Retrieved 2012-02-28.