USS Ingraham (DD-111)

Last updated

USSIngrahamDD111.jpg
History
US flag 48 stars.svgUnited States
Namesake Duncan Nathaniel Ingraham
Builder Union Iron Works, San Francisco, California
Laid down12 January 1918
Launched4 July 1918
Commissioned15 May 1919
Decommissioned29 June 1922
Reclassified17 July 1920, DM-9
Stricken1 December 1936
FateSunk as target off Pearl Harbor 23 July 1937
General characteristics
Class and type Wickes-class destroyer
Displacement
  • 1,202–1,208 long tons (1,221–1,227 t) (standard)
  • 1,295–1,322 long tons (1,316–1,343 t) (deep load)
Length314 ft 4 in (95.8 m)
Beam30 ft 11 in (9.42 m)
Draught9 ft 10 in (3.0 m)
Installed power
Propulsion2 shafts, 2 steam turbines
Speed35 knots (65 km/h; 40 mph) (design)
Range2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph) (design)
Complement6 officers, 108 enlisted men
Armament

USS Ingraham (DD-111) was a Wickes-class destroyer built for the United States Navy during World War I.

Contents

Description

The Wickes class was an improved and faster version of the preceding Caldwell-class. Two different designs were prepared to the same specification that mainly differed in the turbines and boilers used. The ships built to the Bethlehem Steel design, built in the Fore River and Union Iron Works shipyards, mostly used Yarrow boilers that deteriorated badly during service and were mostly scrapped during the 1930s. [1] The ships displaced 1,202–1,208 long tons (1,221–1,227 t) at standard load and 1,295–1,322 long tons (1,316–1,343 t) at deep load. They had an overall length of 314 feet 4 inches (95.8 m), a beam of 30 feet 11 inches (9.4 m) and a draught of 9 feet 10 inches (3.0 m). They had a crew of 6 officers and 108 enlisted men. [2]

Performance differed radically between the ships of the class, often due to poor workmanship. The Wickes class was powered by two steam turbines, each driving one propeller shaft, using steam provided by four water-tube boilers. The turbines were designed to produce a total of 27,000 shaft horsepower (20,000 kW) intended to reach a speed of 35 knots (65 km/h; 40 mph). The ships carried 225 long tons (229 t) of fuel oil which was intended gave them a range of 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph). [3]

The ships were armed with four 4-inch (102 mm) guns in single mounts and were fitted with two 1-pounder guns for anti-aircraft defense. Their primary weapon, though, was their torpedo battery of a dozen 21 inch (533 mm) torpedo tubes in four triple mounts. In many ships a shortage of 1-pounders caused them to be replaced by 3-inch (76 mm) anti-aircraft (AA) guns. [1] They also carried a pair of depth charge rails. A "Y-gun" depth charge thrower was added to many ships. [4]

Construction and career

Ingraham, named for Duncan Nathaniel Ingraham, was launched 4 July 1918 by the Union Iron Works, San Francisco, California; sponsored by Mrs. Alfred S. Gann; and commissioned 15 May 1919. Ingraham departed 20 May for her shakedown cruise, transiting the Panama Canal and arriving Newport, Rhode Island 6 June. After repairs in New York, she sailed for a European tour of duty. While visiting Ostend, Belgium 22 September, she carried the King and Queen of Belgium to Calais, France. The destroyer returned to San Diego 8 January 1920 via New York and the Canal Zone to begin conversion to a minelayer.

Reclassified DM-9, Ingraham began minelaying exercises January 1921 along the California coast before departing Mare Island 7 June. She arrived at Pearl Harbor 18 June and engaged in operations there until she decommissioned at Pearl Harbor 29 June 1922. Her name was struck from the Navy List 1 December 1936 and she was sunk as target off Pearl Harbor on 23 July 1937.

Notes

  1. 1 2 Gardiner & Gray, p. 124
  2. Friedman, pp. 401–03
  3. Friedman, pp. 39–42, 401–03
  4. Friedman, p. 45

Related Research Articles

USS <i>Murray</i> (DD-97) Wickes-class destroyer

USS Murray (DD-97) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Kimberly</i> (DD-80) Wickes-class destroyer

USS Kimberly (DD-80) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Dyer</i> (DD-84) Wickes-class destroyer

USS Dyer (DD-84) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>McKee</i> (DD-87) Wickes-class destroyer

USS McKee (DD-87) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Bell</i> (DD-95) Wickes-class destroyer

USS Bell (DD-95) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Mugford</i> (DD-105) Wickes-class destroyer

USS Mugford (DD-105) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Hazelwood</i> (DD-107) Wickes-class destroyer

USS Hazelwood (DD-107) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Champlin</i> (DD-104) Wickes-class destroyer

USS Champlin (DD-104) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Hart</i> (DD-110) Wickes-class destroyer

USS Hart (DD-110) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Ludlow</i> (DD-112) Wickes-class destroyer

USS Ludlow (DD-112) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>DeLong</i> (DD-129) Wickes-class destroyer

USS DeLong (DD-129) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Meredith</i> (DD-165) Wickes-class destroyer

USS Meredith (DD-165) was a Wickes-class destroyer built for the United States Navy during World War I. She was the first destroyer in the United States Navy that named for a marine.

USS <i>Bush</i> (DD-166) Wickes-class destroyer

USS Bush (DD-166) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Burns</i> (DD-171) Wickes-class destroyer

USS Burns (DD-171) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Anthony</i> (DD-172) Wickes-class destroyer

USS Anthony (DD-172) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Sproston</i> (DD-173) Wickes-class destroyer of the United States Navy

USS Sproston (DD-173) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>OBannon</i> (DD-177) Wickes-class destroyer

USS O'Bannon (DD-177) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Doyen</i> (DD-280) Clemson-class destroyer

USS Doyen (DD-280) was a Clemson-class destroyer built for the United States Navy during World War I.

USS <i>Fuller</i> (DD-297) Clemson-class destroyer

USS Fuller (DD-297) was a Clemson-class destroyer built for the United States Navy during World War I.

<i>Gridley</i>-class destroyer Destroyer class of the US Navy

The Gridley-class destroyers were a class of four 1500-ton destroyers in the United States Navy. They were part of a series of USN destroyers limited to 1,500 tons standard displacement by the London Naval Treaty and built in the 1930s. The first two ships were laid down on 3 June 1935 and commissioned in 1937. The second two were laid down in March 1936 and commissioned in 1938. Based on the preceding Mahan-class destroyers with somewhat different machinery, they had the same hull but had only a single stack and mounted sixteen 21 inch (533 mm) torpedo tubes, an increase of four. To compensate for the increased torpedo armament weight, the gun armament was slightly reduced from five 5"/38 caliber guns (127 mm) to four. USS Maury (DD-401) made the highest trial speed ever recorded for a United States Navy destroyer, 42.8 knots. All four ships served extensively in World War II, notably in the Solomon Islands and the Battle of the Philippine Sea, with Maury receiving a Presidential Unit Citation.

References