Vauxhall Slant-4 engine

Last updated

Vauxhall Slant-4 engine
Vauxhall viva 2300 (2).jpg
Overview
Manufacturer Vauxhall Motors
ProductionSeptember 1967 - July 1983 [1]
Layout
Configuration Naturally aspirated inline-four
Displacement
  • 1,599 cc (97.6 cu in)
  • 1,759 cc (107.3 cu in)
  • 1,979 cc (120.8 cu in)
  • 2,279 cc (139.1 cu in)
Cylinder bore
  • 85.73 mm (3.375 in)
  • 95.25 mm (3.750 in)
  • 97.4 mm (3.83 in)
Piston stroke
  • 69.24 mm (2.726 in)
  • 76.2 mm (3.00 in)
Cylinder block material Cast iron
Cylinder head materialCast iron
Valvetrain SOHC 2 or 4 valves x cyl.
Compression ratio 7.3:1, 8.5:1, 9.2:1
Combustion
Fuel system Carburettor
Fuel type Petrol
Oil system Wet sump
Cooling system Water-cooled
Output
Power output 69.2–135 bhp (51.6–100.7 kW)
Torque output 83–145.5 lb⋅ft (112.5–197.3 N⋅m)
Chronology
Successor Opel cam-in-head engine

The Vauxhall Slant-4 (or Slant Four) is an inline four-cylinder petrol car engine manufactured by Vauxhall Motors. Unveiled in 1966, it was one of the first production overhead camshaft designs to use a timing belt to drive the camshaft. The Slant-4 block was used as a development mule for the Lotus 900 series of engines. [2] Vauxhall used the engine in a variety of models until production ended in 1983. [1]

Contents

History

Design

The Slant-4 gets its name from the fact that its cylinders are inclined at an angle of approximately 45° from vertical. [1] This layout came about because Vauxhall had originally planned to develop a whole family of engines all built on the same production line. There were to be slant-4s and V8s in both petrol and diesel versions, designed under the guidance of Vauxhall's then chief engineer, John Alden. Although a V8 petrol prototype and several 4-cylinder diesel prototypes were built only the 4-cylinder petrol engine made it to series production.

The engine has a single overhead camshaft driven by a timing belt. The Slant-4 was one of three engines using this method of driving the camshaft released the same year, the others being the Fiat Twin Cam engine and the Pontiac straight-6 OHC. Prior to 1966, belt-driven camshafts had only appeared in the Glas 1004 series starting in 1962 and in the few Devin-Panhard cars built starting in 1956. The camshaft operated two valves per cylinder. An ingenious valve train design incorporating an inclined socket head cap screw allowed valve clearances to be adjusted with a feeler gauge and an Allen key. The block and crossflow head are both of cast iron. The layout lowers the overall height of the engine, which allowed for more aerodynamic vehicle bodies to be achieved by lowering the bonnet line. It also means most of the engine is very easy to access for maintenance, with the exception of the exhaust manifold and spark plugs, which are "underneath" the slanted cylinders.

Applications

Prototype engines were fitted to the FC Victor, and the engine also appeared in the Vauxhall XVR concept car. [3] The first production car to use the engine was the 1967 FD Victor. The original engine capacities were 1,599 cc (97.6 cu in) and 1,975 cc (120.5 cu in). For the 1972 launch of the FE Victor, the smaller engine was increased to 1,759 cc (107.3 cu in), and the larger to 2,279 cc (139.1 cu in). Blydenstein Racing developed a long stroke version with a capacity of 2,600 cc (158.7 cu in) capable of producing almost 250 hp (186 kW). Having been designed to withstand the stresses of diesel compression ignition, the block is immensely strong and able to handle large increases in power without modification. The crank was also designed to be shared with the diesel version, which meant its strength was assured for the petrol version. The larger displacement versions are known for their immense torque, but also as not very smooth running or high-revving. A fuel-injected version of the 2.3-litre engine was planned for both the HP Firenza and VX4/90. Running prototypes were tested before the project was abandoned due to cost and the impending merger of Vauxhall's design and engineering pool with that of Opel in Germany.

Apart from its use in passenger cars, the engine was also developed for marine applications. It grew popular with tuners due to its great strength, tunability and simplicity. A 2 L version of the Slant-4 powered the eight Costin Amigos that were built between 1970 and 1972. [4] :165 The engine remained in production well into the 1980s for the Bedford CF van.

Although arguably more technically advanced, the Slant-4 was considered less reliable than its continental GM counterpart, the Opel CIH (Cam In Head) engine. The Slant-4 was replaced by the CIH in the badge-engineered Vauxhall Cavalier Mk.1s from the mid 1970s onward, whilst the Bedford CF van lost the Slant-4 in favour of the CIH when revised in 1983.

Engine specifications

DisplacementBore x StrokeCompression ratioPower (net) [1] TorqueYear(s)Notes
1,599 cc (97.6 cu in)85.73 mm × 69.24 mm (3.375 in × 2.726 in)8.5:172 bhp (54 kW)
@ 5600 rpm
83 lb⋅ft (113 N⋅m)
@ 2200 rpm
1967 to 1972
69.2 bhp (51.6 kW)
@ 5100 rpm
90 lb⋅ft (122 N⋅m)
@ 2500 rpm
1970 to 1972Low-lift camshaft.
1,759 cc (107.3 cu in)85.73 mm × 76.2 mm (3.375 in × 3.000 in)8.5:177 bhp (57 kW)
@ 5100 rpm
97 lb⋅ft (132 N⋅m)
@ 3000 rpm
1972 to 1975
88 bhp (66 kW)
@ 5800 rpm
99 lb⋅ft (134 N⋅m)
@ 3500 rpm
1976 onwards
1,975 cc (120.5 cu in)95.25 mm × 69.24 mm (3.750 in × 2.726 in)8.5:188 bhp (66 kW)
@ 5500 rpm
102 lb⋅ft (138 N⋅m)
@ 3200 rpm
1967 to 1972
7.3:177.5 bhp (57.8 kW)
@ 5100 rpm
100.5 lb⋅ft (136 N⋅m)
@ 2800 rpm
1971 to 1972Canadian spec.
8.5:1104 bhp (78 kW)
@ 5600 rpm
117 lb⋅ft (159 N⋅m)
@ 3400 rpm
1968 to 1972Dual carburettors
2,279 cc (139.1 cu in)97.4 mm × 76.2 mm (3.83 in × 3.00 in)8.5:1100 bhp (75 kW)
@ 5200 rpm
139 lb⋅ft (188 N⋅m)
@ 3000 rpm
1972 to 1976
109 bhp (81 kW)
@ 5000 rpm
140 lb⋅ft (190 N⋅m)
@ 3000 rpm
1976 to 1978
112 bhp (84 kW)
@ 5400 rpm
140 lb⋅ft (190 N⋅m)
@ 3000 rpm
1972 to 1974Dual carburettors
116 bhp (87 kW)
@ 5000 rpm
145 lb⋅ft (197 N⋅m)
@ 3000 rpm
1974 to 1978Dual carburettors
9.2:1131 bhp (98 kW)
@ 5500 rpm
145.5 lb⋅ft (197.3 N⋅m)
@ 3500 rpm
1974 to 1975Dual carburettors, HPF
8.5:1135 bhp (101 kW)
@ 5500 rpm
134 lb⋅ft (182 N⋅m)
@ 4500 rpm
1978 to 1982Dual carburettors, 16-valve head, HS/HSR

Lotus 900 series engines

It is said that when Vauxhall unveiled its new slant-four engine at the 1966 Earls Court Motor Show its bore centers were exactly the same as those proposed by Lotus for their new all-alloy engine. Lotus boss Colin Chapman immediately negotiated a deal with Vauxhall to buy some of their cast-iron blocks so that development of Lotus’ own aluminum 907 engine could be sped up. For racing the hybrid engines were called LV220 and LV240, with LV standing for Lotus/Vauxhall and the numbers standing for the reported horsepower developed by each version. [5] Lotus tested the production intent hybrid engine in a Vauxhall Victor and a Vauxhall Viva GT (registration number RAH 713F), as well as in a converted Bedford CF van.

The Lotus 900 series engine block was cast in aluminium alloy instead of iron, which made it considerably lighter than the Slant-4. The Lotus engine also used a cylinder head of light alloy that featured double overhead camshafts and four valves per cylinder. With a few modifications the Lotus head could be fitted to the Vauxhall block. Engines with Lotus heads were used in Vauxhall's dealer team race and rally programmes until the late 1970s. [6]

Vauxhall 16-valve engines

After experimenting with an 8-valve twin cam cylinder head, Vauxhall began development of a 16-valve, twin cam head for the Slant-4 in the early 1970s. The first test engine, 'Old Number 1', was running by 1973. The cylinder head was similar to the Lotus head in principle, but different in detail; in particular the cam carriers on the Vauxhall engine were angled upwards so that the covers were both horizontal (those on the Lotus engine were equal about the cylinder centreline).

The 16-valve was announced for use in the Chevette 2300 HS, which was immediately homologated for racing by the RAC MSA. Vauxhall's own 16-valve head had passed beyond the design stage, but initially was in such short supply that the rally team continued to use the Lotus heads. [4] :248 To address the production shortfall Vauxhall approached Cosworth and had them produce the 400 cylinder heads needed for the racing homologation requirements. [7] :83,84 When the new Vauxhall heads appeared in the Chevette 2300 HST the other teams complained, which led to a homologation scandal. This in turn led to the cars being prevented from starting the 1978 Rally of Portugal. As a result, all cars competing in international rallies were forced to use the Vauxhall head.

Motorsports

Lotus raced the hybrid LV engine in two Lotus 62s for a single season.

While Vauxhall's General Motors parent company had a "no racing" policy, the Slant-4 was campaigned in various cars by the independent Dealer Team Vauxhall (DTV) organization. Development of the cars was handled by different groups, including Bill Blydenstein Racing, who ran the rally team and both raced the Lotus-head cars and improved the Vauxhall head to a point where it performed better than the Lotus head. Chris Coburn's Coburn Improvements also raced under the DTV banner. [4] :248

Related Research Articles

<span class="mw-page-title-main">Cosworth</span> British automotive engineering company

Cosworth is a British automotive engineering company founded in London in 1958, specialising in high-performance internal combustion engines, powertrain, and electronics for automobile racing (motorsport) and mainstream automotive industries. Cosworth is based in Northampton, England, with facilities in Cottenham, England, Silverstone, England, and Indianapolis, IN, US.

<span class="mw-page-title-main">Straight-four engine</span> Inline piston engine with four cylinders

A straight-four engine is a four-cylinder piston engine where cylinders are arranged in a line along a common crankshaft.

<span class="mw-page-title-main">Straight-six engine</span> Internal combustion engine

The inline-six engine is a piston engine with six cylinders arranged in a straight line along the crankshaft. A straight-six engine has perfect primary and secondary engine balance, resulting in fewer vibrations than other designs of six or fewer cylinders.

<span class="mw-page-title-main">Vauxhall Firenza</span> Motor vehicle

The Firenza is a model of car offered by Vauxhall from May 1971 until 1975. It was a development of the Viva, but had a distinctive coupé body style (fastback) and only two doors. In South Africa, it was sold as the Chevrolet Firenza until it was replaced by the Chevrolet 1300/1900 during 1975. Its name is derived from Firenze, the name of the Italian city known in English as Florence.

<span class="mw-page-title-main">Vauxhall Cavalier</span> Car model

The Vauxhall Cavalier is a large family car that was sold primarily in the United Kingdom by Vauxhall from 1975 to 1995. It was based on a succession of Opel designs throughout its production life, during which it was built in three incarnations. The first generation of Cavalier, launched in 1975 and produced until 1981, was Vauxhall's version of the General Motors 'U-Car' - essentially an Opel Ascona B/ Opel Manta with a few minor visual differences.

<span class="mw-page-title-main">Coventry Climax</span> British forklift truck, fire pump, and speciality engine manufacturer

Coventry Climax was a British forklift truck, fire pump, racing, and other speciality engine manufacturer.

<span class="mw-page-title-main">Rover V8 engine</span> Reciprocating internal combustion engine

The Rover V8 engine is a compact V8 internal combustion engine with aluminium cylinder block and cylinder heads, originally designed by General Motors and later re-designed and produced by Rover in the United Kingdom. It has been used in a wide range of vehicles from Rover and other manufacturers since its British debut in 1967.

<span class="mw-page-title-main">Vauxhall Carlton</span> Motor vehicle

The Vauxhall Carlton is a series of large family car/executive car sold in two distinct generations by the Vauxhall division of GM Europe between 1978 and 1994. The Carlton was based on the Opel Rekord E (Mk.1) and Omega A (Mk.2).

<span class="mw-page-title-main">Triumph slant-four engine</span> Inline four-cylinder petrol car engine

The Triumph slant-four is an inline four-cylinder petrol car engine developed by the Triumph Motor Company. It first appeared in 1968 in the Saab 99. The first Triumph model to use the engine did not appear until 1972. With an original capacity of 1.7 L, displacement grew over time to 2.0 L. Triumph production ended in 1981.

<span class="mw-page-title-main">Multi-valve</span> Type of car engine

In automotive engineering a multi-valve or multivalve engine is one where each cylinder has more than two valves. A multi-valve engine has better breathing and may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, delivering more power.

<span class="mw-page-title-main">BMC A-series engine</span> Reciprocating internal combustion engine

The Austin Motor Company A-series is a British small straight-4 automobile engine. Launched in 1951 with the Austin A30, production lasted until 2000 in the Mini. It used a cast-iron block and cylinder head, and a steel crankshaft with three main bearings. The camshaft ran in the cylinder block, driven by a single-row chain for most applications, and with tappets sliding in the block, accessible through pressed steel side covers for most applications, and with overhead valves operated through rockers. The cylinder blocks are not interchangeable between versions intended for conventional end-on mounted gearboxes and the 'in-sump' transaxle used on British Motor Corporation/British Leyland front wheel drive models such as the Mini. The cylinder head for the overhead-valve version of the A-series engine was designed by Harry Weslake – a cylinder head specialist famed for his involvement in SS (Jaguar) engines and several Formula One-title winning engines. Although a "clean sheet" design, the A-series owed much to established Austin engine design practise, resembling in general design and overall appearance a scaled-down version of the 1200cc overhead-valve engine first seen in the Austin A40 Devon which would form the basis of the later B-series engine.

<span class="mw-page-title-main">Lotus 900 series</span> Series of engines developed by Lotus

The Lotus 900 series is a family of internal combustion engines designed and built by Lotus Cars of United Kingdom. Successor to the Lotus-Ford Twin Cam, the 900 was the first complete engine developed by Lotus. The engine was built from 1972 to 1999.

<span class="mw-page-title-main">GM Family 1 engine</span> Reciprocating internal combustion engine

The GM Family I is a straight-four piston engine that was developed by Opel, a former subsidiary of General Motors and now a subsidiary of PSA Group, to replace the Vauxhall OHV, Opel OHV and the smaller capacity Opel CIH engines for use on small to mid-range cars from Opel/Vauxhall. The engine first appeared in the Opel Kadett D in 1979, and shortly afterwards in its Vauxhall badged sister - the Vauxhall Astra Mk.1 in 1980. Despite this, the previous Opel OHV engine continued to be sold in entry level versions of the Opel Kadett/Astra and Corsa throughout the 1980s.

<span class="mw-page-title-main">Alfa Romeo Twin Cam engine</span> Reciprocating internal combustion engine

The Alfa Romeo Twin Cam engine is an all-alloy inline-four engine series produced by Alfa Romeo from 1954 to 1994. In Italian it is known as the "bialbero" ("twin-shaft"), and has also been nicknamed the "Nord" (North) engine in reference to its being built in Portello, Milan, in the North of Italy and to distinguish it from the Alfa Romeo Boxer engine built in the South (Sud) for the Alfasud.

<span class="mw-page-title-main">GM Family II engine</span> Reciprocating internal combustion engine

The Family II is a straight-4 piston engine that was originally developed by Opel in the 1970s, debuting in 1981. Available in a wide range of cubic capacities ranging from 1598 to 2405 cc, it simultaneously replaced the Opel CIH and Vauxhall Slant-4 engines, and was GM Europe's core mid-sized powerplant design for much of the 1980s, and provided the basis for the later Ecotec series of engines in the 1990s.

<span class="mw-page-title-main">Lotus-Ford Twin Cam</span> Reciprocating internal combustion engine

The Lotus-Ford Twin Cam is an inline-four petrol engine developed by Lotus for the 1962 Lotus Elan. A few early examples displaced 1.5 litres, but the majority were 1.55-litre (1557ml) engines. It used a Ford 116E iron cylinder block and a new aluminium cylinder head with dual overhead camshafts. The Twin Cam was used in a variety of vehicles until Lotus stopped production in 1973. It was succeeded by the Lotus 907 engine.

<span class="mw-page-title-main">Bedford CF</span> Motor vehicle

The Bedford CF is a range of full-size panel vans produced by Bedford. The van was introduced in 1969 to replace the CA model, and was sized to compete directly with the Ford Transit, which had entered production four years earlier. Its design was similar to its American counterpart, the Chevrolet Van (1971–1995).

<span class="mw-page-title-main">Fiat 124 series engine</span> Reciprocating internal combustion engine

Designed by Aurelio Lampredi, the Fiat 124 engine first appeared in the all-new Fiat 124 in April 1966. The in-line four-cylinder engine comprised an iron block with an aluminium cylinder-head with pushrod actuated valves. The belt-driven design was ahead of its time when introduced. European production of the petrol versions ended with the Fiat 131 in 1984, but later diesel derivatives continued to be built until 1999. It did have a longer life in its twin-cam iteration, which continued in production until 2000. While originally of an overhead valve design, an overhead cam version was added to the facelifted 131 in 1981. The capacity was initially 1.2 L (1,197 cc), but eventually ranged between 1.2 and 1.9 L. There were also three SOHC diesel iterations of 1.4, 1.7, and 1.9 litres. The last versions of this engine to be built were the diesels. The 1.9 L (1,929 cc) direct-injected diesel version was the first direct-injection diesel to appear in a production passenger car, the Fiat Croma Turbo D i.d.

<span class="mw-page-title-main">Opel cam-in-head engine</span> Reciprocating internal combustion engine

The Opel cam-in-head engine (CIH) is a family of automobile engines built by former General Motors subsidiary Opel from 1965 until 1998, appearing extensively in Opel/Vauxhall badged cars during this period. Both four- and six-cylinder inline configurations were produced. The name derives from the location of the camshaft, which was neither cam-in-block nor a true overhead camshaft. In the CIH engine the camshaft is located in the cylinder head but sits alongside the valves rather than above them, so therefore effectively is still an overhead valve design. The valves are actuated through very short tappets and rocker arms. The engine first appeared in the Opel Rekord B in 1965, and was largely replaced in four-cylinder form by the GM Family II unit as Opel/Vauxhall's core mid-size engine in the 1980s, with the six-cylinder versions continuing until 1994 in the Omega A and Senator B. A large capacity 2.4L four-cylinder version continued until 1998.

References

  1. 1 2 3 4 "VAUXHALL - THE SLANT FOUR ENGINE STORY". vauxpedianet.uk2sitebuilder.com.
  2. Vale, Matthew (6 January 2016). Lotus Elite, Eclat and Excel: An Enthusiast's Guide. The Crowood Press Ltd. ISBN   978-1785000782.
  3. "1. Vauxhall XVR Concept - Background". vauxpedianet.uk2sitebuilder.com.
  4. 1 2 3 Coomber, Ian (5 December 2017). Vauxhall: Britain's Oldest Car Maker. Fonthill Media. ISBN   978-1781556405.
  5. "Lotus 62 Specification Sheet". gglotus.org.
  6. "The Slant Four engine". www.droopsnoot.co.uk.
  7. Robson, Graham (15 May 2017). Cosworth: The Search for Power - 6th Edition. Veloce Publishing. ISBN   978-1845848958.