Waste Management Licensing Regulations 1994

Last updated

Waste Management Licensing Regulations 1994
Statutory Instrument
Royal Coat of Arms of the United Kingdom (variant 1, 1952-2022).svg
Citation SI 1994/1056
Text of the Waste Management Licensing Regulations 1994 as in force today (including any amendments) within the United Kingdom, from legislation.gov.uk.

The Waste Management Licensing Regulations 1994 (SI 1994/1056) formerly applied in Great Britain (England, Scotland and Wales) to those persons involved in the collection, storage, treatment and disposal of controlled wastes. The regulations dictate the licensing of persons or businesses involved in the management of waste and relate directly to the licensing of a site or activity to carry out the management, processing and disposal of wastes. (Note: The regulations were superseded in 2007 after the formation of the "permitting regulations".) These activities were previously covered by provisions contained within the Control of Pollution Act 1974 (COPA). The regulations implement certain provisions of European Directive 91/156/EEC and are enacted under the Environmental Protection Act 1990.

Contents

A licence is required to authorise the:

Licensing

On 6 April 2008 the Waste Management Licensing Regulations were replaced for England and Wales by the Environmental Permitting Regulations 2007. There are no longer separate regulation regimes for waste management and PPC (Pollution Prevention Control) activities, with both being regulated by way of Environmental Permits. [1]

In order to obtain a licence certain conditions must be met. These fall into 3 categories which are aimed to ensure that waste management is in the hands of "fit and proper persons".

This generally requires involvement of the Waste management training board WAMITAB.
there is a requirement that managers of the facilities have obtained the relevant Certificate of Technical Competence (CoTC) in which there are a number of levels.

That the company, or persons acting for the company, should not have any summary convictions relating to provisions of regulations affecting the industry. A licence can be subsequently revoked if a licence holder has ceased to be fit and proper by reason of his having been convicted of a relevant offence.

The applicant would not be regarded as fit and proper if it appears to the waste regulation authority (WRA) that:

He has not made financial provision adequate to discharge the obligations arising from the licence
he either has no intention of making it, or is in no position to make it

As the provision is based on licence conditions, which are variable depending upon the operation, financial provision will be variable. In the case of landfill operations these funds will also be expected to cover the post-closure period where continuing expenditure might be expected for: monitoring replacement of pollution control equipment, and site restoration.

Security (usually in the form of insurance) must also be provided to cover eventualities that would be likely to have higher costs than those planned for in the ordinary course of business, e.g. failure of a landfill containment causing pollution of water courses.

The issues of risk are discussed between all parties involved in the application, i.e. the applicant, WRA and the provider of the cover to decide:

What event would trigger payment
What specific works or other measures are to be covered
The amount of the appropriate cover

Ultimately the WRA needs to be satisfied that adequate cover for risks has been provided; to reinforce this it may be included as part of the licence condition.

Facility

The location of the proposed waste management facility must be such that it is not located within 2 kilometers of a SSSI (Site of Special Scientific Interest).

Permitting (Licensing) requires that for certain installations (notably WEEE and Hazardous Waste treatment facilities), they are of such construction as to prevent the contamination of groundwater and the local environment. The facility must be contained within a building, with impermeable floor (concrete) and no activities may be carried out outside of the demise of the treatment facility.

Planning applications have to be granted prior to the commencement of a waste management application being submitted. This includes a "change of use" planning application. Planning must be granted for the category "Waste" in order to comply with waste management licensing regulations.

As part of the license application, a site layout has to be submitted, describing the various activities that are to be undertaken and the location that these activities will be carried out. A baseline assessment of the site is also required, documenting current pollution levels. This assessment defines the condition to which the site is to be returned, at the end of its useful working life,

For Scotland, the 1994 Regulations were replaced by the Waste Management Licensing (Scotland) Regulations 2011 (SSI 2011/228) with effect from 27 March 2011 [2]

See also

Related Research Articles

The Protocol on Environmental Protection to the Antarctic Treaty, also known as the Madrid Protocol, is a complementary legal instrument to the Antarctic Treaty signed in Madrid on October 4, 1991. It entered into force on January 14, 1998.

<span class="mw-page-title-main">Industrial waste</span> Waste produced by industrial activity or manufacturing processes

Industrial waste is the waste produced by industrial activity which includes any material that is rendered useless during a manufacturing process such as that of factories, mills, and mining operations. Types of industrial waste include dirt and gravel, masonry and concrete, scrap metal, oil, solvents, chemicals, scrap lumber, even vegetable matter from restaurants. Industrial waste may be solid, semi-solid or liquid in form. It may be hazardous waste or non-hazardous waste. Industrial waste may pollute the nearby soil or adjacent water bodies, and can contaminate groundwater, lakes, streams, rivers or coastal waters. Industrial waste is often mixed into municipal waste, making accurate assessments difficult. An estimate for the US goes as high as 7.6 billion tons of industrial waste produced annually, as of 2017. Most countries have enacted legislation to deal with the problem of industrial waste, but strictness and compliance regimes vary. Enforcement is always an issue.

<span class="mw-page-title-main">Resource Conservation and Recovery Act</span>

The Resource Conservation and Recovery Act (RCRA), enacted in 1976, is the principal federal law in the United States governing the disposal of solid waste and hazardous waste.

<span class="mw-page-title-main">Clean Water Act</span> 1972 U.S. federal law regulating water pollution

The Clean Water Act (CWA) is the primary federal law in the United States governing water pollution. Its objective is to restore and maintain the chemical, physical, and biological integrity of the nation's waters; recognizing the responsibilities of the states in addressing pollution and providing assistance to states to do so, including funding for publicly owned treatment works for the improvement of wastewater treatment; and maintaining the integrity of wetlands.

<span class="mw-page-title-main">Blue Flag beach</span> Certification for high quality beaches

The Blue Flag is a certification by the Foundation for Environmental Education (FEE) that a beach, marina, or sustainable boating tourism operator meets its standards. The Blue Flag is a trademark owned by FEE, which is a not-for-profit non-governmental organisation consisting of 65 organisations in 77 member countries.

<span class="mw-page-title-main">Environmental Protection Department</span>

Environmental Protection Department (EPD) is a department of Hong Kong Government concerning the issues of environmental protection in Hong Kong.The EPD is responsible for developing policies covering environmental protection, nature conservation; enforcing environmental legislation; monitoring environmental quality; providing collection, transfer, treatment and disposal facilities for many types of waste; advising on the environmental implications of town planning and new policies; handling pollution complaints and incidents; and raising awareness and support in the community for environmental initiatives.

<span class="mw-page-title-main">Environmental Protection Act 1990</span> United Kingdom legislation

The Environmental Protection Act 1990 is an Act of the Parliament of the United Kingdom that as of 2008 defines, within England and Wales and Scotland, the fundamental structure and authority for waste management and control of emissions into the environment.

<span class="mw-page-title-main">Landfills in the United Kingdom</span>

Landfills in the United Kingdom were historically the most commonly used option for waste disposal. Up until the 1980s, policies of successive governments had endorsed the "dilute and disperse" approach. Britain has since adopted the appropriate European legislation and landfill sites are generally operated as full containment facilities. However, many dilute and disperse sites remain throughout Britain.

Title 40 is a part of the United States Code of Federal Regulations. Title 40 arranges mainly environmental regulations that were promulgated by the US Environmental Protection Agency (EPA), based on the provisions of United States laws. Parts of the regulation may be updated annually on July 1.

<span class="mw-page-title-main">Biomedical waste</span> Waste containing infectious material

Biomedical waste or hospital waste is any kind of waste containing infectious materials generated during the treatment of humans or animals as well as during research involving biologics. It may also include waste associated with the generation of biomedical waste that visually appears to be of medical or laboratory origin, as well research laboratory waste containing biomolecules or organisms that are mainly restricted from environmental release. As detailed below, discarded sharps are considered biomedical waste whether they are contaminated or not, due to the possibility of being contaminated with blood and their propensity to cause injury when not properly contained and disposed. Biomedical waste is a type of biowaste.

<span class="mw-page-title-main">Landfills in the United States</span> American landfills

Municipal solid waste (MSW) – more commonly known as trash or garbage – consists of everyday items people use and then throw away, such as product packaging, grass clippings, furniture, clothing, bottles, food scraps and papers. In 2018, Americans generated about 265.3 million tonnes of waste. In the United States, landfills are regulated by the Environmental Protection Agency (EPA) and the states' environmental agencies. Municipal solid waste landfills (MSWLF) are required to be designed to protect the environment from contaminants that may be present in the solid waste stream.

<span class="mw-page-title-main">Waste management law</span>

Waste management laws govern the transport, treatment, storage, and disposal of all manner of waste, including municipal solid waste, hazardous waste, and nuclear waste, among many other types. Waste laws are generally designed to minimize or eliminate the uncontrolled dispersal of waste materials into the environment in a manner that may cause ecological or biological harm, and include laws designed to reduce the generation of waste and promote or mandate waste recycling. Regulatory efforts include identifying and categorizing waste types and mandating transport, treatment, storage, and disposal practices.

Waste Control Specialists LLC (WCS) is a treatment, storage, & disposal company dealing in radioactive, hazardous, and mixed wastes. Developed and controlled by Texas billionaire investor Harold Simmons until his death at the end of 2013, the company was founded in Dallas, Texas in 1989 as a landfill operator, and awarded a unique license for disposal of low level radioactive waste in 2009. Its main operations are in Andrews County, Texas.

Solid waste policy in the United States is aimed at developing and implementing proper mechanisms to effectively manage solid waste. For solid waste policy to be effective, inputs should come from stakeholders, including citizens, businesses, community-based organizations, non-governmental organizations, government agencies, universities, and other research organizations. These inputs form the basis of policy frameworks that influence solid waste management decisions. In the United States, the Environmental Protection Agency (EPA) regulates household, industrial, manufacturing, and commercial solid and hazardous wastes under the 1976 Resource Conservation and Recovery Act (RCRA). Effective solid waste management is a cooperative effort involving federal, state, regional, and local entities. Thus, the RCRA's Solid Waste program section D encourages the environmental departments of each state to develop comprehensive plans to manage nonhazardous industrial and municipal solid waste.

Radioactive waste is generated from the nuclear weapons program, commercial nuclear power, medical applications, and corporate and university-based research programs. Some of the materials LLW consists of are: "gloves and other protective clothing, glass and plastic laboratory supplies, machine parts and tools, and disposable medical items that have come in contact with radioactive materials". Waste is generally categorized as high level waste (HLW) and low-level waste (LLW). LLW contains materials such as irradiated tools, lab clothing, ion exchanger resins, animal carcasses, and trash from defense, commercial nuclear power, medical, and research activities. These materials usually have radioactivity that have short half lives—from ranges of multiple days to several hundred years. In 1990, 1.1 million cubic feet of LLW was produced. Currently, U.S. reactors generate about 40,000 cubic meters of low-level radioactive waste per year, including contaminated components and materials resulting from reactor decommissioning.

<span class="mw-page-title-main">United States regulation of point source water pollution</span> Overview of the regulation of point source water pollution in the United States of America

Point source water pollution comes from discrete conveyances and alters the chemical, biological, and physical characteristics of water. In the United States, it is largely regulated by the Clean Water Act (CWA). Among other things, the Act requires dischargers to obtain a National Pollutant Discharge Elimination System (NPDES) permit to legally discharge pollutants into a water body. However, point source pollution remains an issue in some water bodies, due to some limitations of the Act. Consequently, other regulatory approaches have emerged, such as water quality trading and voluntary community-level efforts.

<span class="mw-page-title-main">New Brunswick environmental legislation</span>

The province of New Brunswick has created and implemented various Acts, such as the Clean Environment Act, Clean Air Act, and the Clean Water Act, throughout history to ensure that the environment is considered and protected throughout various project. These acts describe the process that will be undertaken to assess the impact of projects, and the steps to be taken when certain situations arise.

Water in Arkansas is an important issue encompassing the conservation, protection, management, distribution and use of the water resource in the state. Arkansas contains a mixture of groundwater and surface water, with a variety of state and federal agencies responsible for the regulation of the water resource. In accordance with agency rules, state, and federal law, the state's water treatment facilities utilize engineering, chemistry, science and technology to treat raw water from the environment to potable water standards and distribute it through water mains to homes, farms, business and industrial customers. Following use, wastewater is collected in collection and conveyance systems, decentralized sewer systems or septic tanks and treated in accordance with regulations at publicly owned treatment works (POTWs) before being discharged to the environment.

Industrial stormwater is runoff from precipitation that lands on industrial sites. This runoff is often polluted by materials that are handled or stored on the sites, and the facilities are subject to regulations to control the discharges.

References

  1. "Defra, UK - Environmental Protection - Recycling and waste". Archived from the original on 2 May 2009. Retrieved 20 April 2009.
  2. "The Waste Management Licensing (Scotland) Regulations 2011" . Retrieved 26 December 2016.