16-inch/45-caliber Mark 6 gun

Last updated

16"/45-caliber gun
USS South Dakota (BB-57) at Scapa Flow, 1943.jpg
Battleship armament: 16"/45-caliber guns aboard the battleship USS South Dakota (BB-57).
TypeNaval gun
Place of originUnited States
Service history
In service1941–1956
Used byUS Navy
Wars World War II
Production history
Designed1936
VariantsMod 0–2
Specifications
Mass192,310 lb (87,230 kg)
Length61 ft 4 in (18.69 m)
Barrel  length60 ft (18 m) bore (45 calibers)

Shell AP, HC
Shell weightAP:2,700 pounds (1,225 kg)
HC:1,900 pounds (862 kg)
Caliber 16 inch (40.6 cm)
Recoil 48-inch (120 cm)
Elevation -2° to +45°
Traverse -150° to 150°
Rate of fire 2 rpm
Muzzle velocity AP: 2,300 feet per second (701 m/s)
HC: 2,635 feet per second (803 m/s)
Maximum firing range33,741 m (20.966 mi) with AP

The 16"/45-caliber Mark 6 gun is a naval gun designed in 1936 by the United States Navy for their Treaty battleships. It was introduced in 1941 aboard their North Carolina-class battleships, replacing the originally intended 14"/50-caliber Mark B guns and was also used for the follow-up South Dakota class. These battleships carried nine guns in three three-gun turrets. The gun was an improvement to the 16"/45-caliber Mark 5 guns used aboard the Colorado class, and the predecessor to the 16"/50-caliber Mark 7 gun used aboard the Iowa class.

Contents

Description

The U.S. Navy had the 16"/50-caliber Mark 2 guns left over from the canceled Lexington-class battlecruisers and South Dakota-class battleships of the early 1920s. However it was already apparent that the Mark 2 too heavy to arm the North Carolina and new South Dakota (1939) battleship classes which had to adhere to the 35,000 ton standard displacement set by the Second London Naval Treaty. Indeed the Mark 6 45 caliber "three-gun" turret weighed some 400 long tons (410 t) less than the Mark 2 50-caliber did; also thanks to a decreased barbette size in the Mark 6 the total weight savings over the Mark 2 would be 2,000 long tons (2,000 t),

The Mark 6 16 in/45 guns were improved versions of the Mark 1 guns (upgraded to Marks 5 and 8 in the late 1930s) mounted on the Colorado-class battleships. The Mark 6 had a limit of a 2,240-pound (1,020 kg) shell with a maximum 35,000-yard (32,000 m) range and their turret limit of 30-degree elevation. [1] A considerable upgrade over its predecessor was the Mark 6's ability to fire a new 2,700-pound (1,200 kg) armor-piercing (AP) shell developed by the Bureau of Ordnance. At full charge with a brand-new gun, the heavy shell would be expelled at a muzzle velocity of 2,300 feet per second (700 m/s); at a reduced charge, the same shell would be fired at 1,800 f/s (550 m/s).

Barrel life—the approximate number of rounds a gun could fire before needing to be relined or replaced—was 395 shells when using AP, increasing to 2,860 for practice rounds. By comparison, the 12"/50-caliber Mark 8 gun of the Alaska-class large cruisers had a barrel life of 344 shots, while the 16"/50-caliber Mark 7 gun fitted in the Iowa-class battleships had a barrel life of 290 rounds. [2]

Turning at 4 degrees a second, each turret could train to 150 degrees on either side of the ship. The guns could be elevated to a maximum elevation of 45 degrees; turrets one and three could depress to −2 degrees, but due to its superfiring position, the guns on turret two could only depress to 0 degrees. [3]

Each gun barrel was 61 feet 4 inches (18.69 m) long overall, which is 45 bore diameters, hence the 16"/45-caliber; its bore length was 60 feet (18 m) and rifling length was 51.5 feet (15.7 m). Maximum range was obtained at an elevation of 45 degrees. With the heavy AP shell the maximum range was 36,900 yards (21.0 mi; 33.7 km), and with the lighter 1,900-pound (860 kg) high capacity (HC) shell, 40,180 yards (22.8 mi; 36.7 km). The guns weighed 192,310 lb (87,230 kg; 86 long tons) not including the breech; the turrets weighed slightly over 3,100,000 lb (1,410,000 kg; 1400 long tons). [3]

When firing the same shell, the 16 in/45 Mark 6 had a slight advantage over the 16 in/50 Mark 7 when hitting deck armor—a shell from a 45 cal gun would be slower, meaning that it would have a steeper trajectory as it descended. At 35,000 yards (20 mi; 32 km), a shell from a 45 cal would strike a ship at an angle of 45.2 degrees, as opposed to 36 degrees with the 50 cal. [3]

A cut-away diagram of the 16-inch turrets on board the North Carolina class 16in Gun Turret.jpg
A cut-away diagram of the 16-inch turrets on board the North Carolina class

Shell

The Mark 6 and 7 guns were originally intended to fire the relatively light 2,240-pound (1,020 kg) (1.00 long ton) Mark 5 armor-piercing shell. However, the shell-handling system for these guns was redesigned to use the "super-heavy" 2,700-pound (1,200 kg) APCBC (armor-piercing, capped, ballistic capped) Mark 8 shell before any of the Iowa-class battleships were laid down. The large-caliber guns were designed to fire two different 16-inch (406 mm) shells: an armor-piercing round for anti-ship and anti-structure work, and a high-explosive round designed for use against unarmored targets and shore bombardment.

The Mark 8 shells gave the North Carolina, South Dakota, and Iowa classes the second heaviest broadside of all battleship classes, despite the fact that the North Carolina and South Dakota ships were treaty battleships. Only the Yamato-class could throw more weight. The Mark 6's disadvantage relative to other contemporary battleship classes was its comparatively shorter range. [3] [4]

The propellant consists of small cylindrical grains of smokeless powder with an extremely high burning rate. A maximum charge consists of six silk bags, each filled with 110 pounds (50 kg) of propellant. [5]

Service history

The Mark 6 16-inch gun holds several distinctions relating to the United States' World War II combat history.

In the first instance, the battleship USS Massachusetts (BB-59) employed these 16"/45-caliber guns as her primary armament, and she is believed to have fired the United States' first and last 16-inch shells of World War II; [6] the first use occurring on 8 November 1942 during the Naval Battle of Casablanca (shortly before the Naval battle of Guadalcanal), [7] the last on 9 August 1945 off the coast of Hamamatsu, Japan. [6] Furthermore, their use at Casablanca was the only time that a fast battleship of the US Navy fired its guns in anger in the European theater, which was also one of the two engagements in World War II where the US Navy's fast battleship dueled an enemy battleship. Massachusetts' heavy 16-inch AP shells caused significant damage to the incomplete battleship Jean Bart although few of the shells actually exploded because they had been fitted with fuzes manufactured in 1918. One of Massachusetts' hits penetrated both of Jean Bart's armor decks and exploded in the empty magazines for the missing 152 mm guns, had this magazine been full of propellant charges the resulting explosion could have destroyed the vessel, while Massachusetts' fifth salvo jammed the rotating mechanism of Jean Bart's sole operational main battery turret. [8]

In the second instance, as the primary armament of USS Washington (BB-56) these guns were employed against the Imperial Japanese Navy's Kirishima (a much older and less powerful ship, armed with 8 × 14-inch guns and originally built as a battlecruiser during World War I) during the Naval battle of Guadalcanal; this has been cited by historians as the only instance in World War II in which one American battleship actually sank an enemy battleship. [9] (While there was a battleship-versus-battleship engagement at Leyte Gulf, torpedoes rather than gunfire were largely regarded as being responsible for sinking the enemy battleships.) The Washington had the aid of a naval fire control computer—in this case the Ford Instrument Company Mark 8 Range Keeper analog computer used to direct the fire from the battleship's guns, taking into account several factors such as the speed of the targeted ship, the time it takes for a projectile to travel, and air resistance to the shells fired at a target. This gave the US Navy a major advantage in the Pacific War, as the Japanese did not develop radar or automated fire control to a comparable level (although they did have complex mechanical ballistics computers, which had been in use since World War I). [10] Washington was able to track and fire at targets at a greater range and with increased accuracy, as was demonstrated in November 1942, when she engaged Kirishima at a range of 8,400 yards (7,700 m) at night. Using her nine 16"/45-caliber Mark 6 guns, Washington fired 75 rounds of 16-inch AP shells and scored an incredible twenty heavy-caliber hits that critically damaged the Kirishima, which eventually sank. [10] [11] [12] During the same battle, South Dakota also fired off several salvos from her 16"/45 guns before she had to withdraw for repairs due to a faulty circuit breaker.

Successor

The next US Navy battleship class, the Iowa class, did not fall under Treaty weight restrictions and allowed for additional displacement. However, in their original design, the General Board was incredulous that a tonnage increase of 10,000 long tons (10,000 t) would only allow the addition of 6 knots (11 km/h; 6.9 mph)s over the South Dakotas. Rather than retaining the 16"/45-caliber Mark 6 gun used in the South Dakotas, they ordered that future studies would have to include the more powerful (but heavier) 16"/50-caliber Mark 2 guns left over from the canceled Lexington-class battlecruisers and South Dakota-class battleships of the early 1920s. It also allowed the draft of the ships to be increased, meaning that the ships could be shortened (lowering weight) and the power reduced (since a narrower beam reduces drag). [13]

The Mark 2 50-caliber gun turret weighed some 400 long tons (410 t) more than the Mark 6 45 caliber did; the barbette size also had to be increased so the total weight gain was about 2,000 long tons (2,000 t), putting the ship at a total of 46,551 long tons (47,298 t)—well over the 45,000 long ton limit. An apparent savior appeared in a Bureau of Ordnance preliminary design for a turret that could carry the 50-caliber guns in a smaller barbette. This breakthrough was shown to the General Board as part of a series of designs on 2 June 1938. [14] Nonetheless, the Mark 7 gun still weighed about 239,000 pounds (108 000 kg) without the breech, or 267,900 pounds with the breech, considerably heavier than the Mark 6, which weighed 192,310 pounds (87,230 kg). [2]

The Mark 7 had a greater maximum range over the Mark 6: 23.64 miles (38.04 km) vs 22.829 miles (36.740 km). When firing the same conventional shell, the 16"/45-caliber Mark 6 gun used by the treaty battleships of the North Carolina and South Dakota classes had a slight advantage over the 16"/50-caliber Mark 7 gun on the Iowa class, when hitting deck armor—a shell from a 45 cal gun would be slower, meaning that it would have a steeper trajectory as it descended. At 35,000 yards (20 mi; 32 km), a shell from a 45 cal would strike a ship at an angle of 45.2 degrees, as opposed to 36 degrees with the 50 cal. [2] [3] [4]

Barrel life—the approximate number of rounds a gun could fire before needing to be relined or replaced—was 395 shells when using AP, increasing to 2,860 for practice rounds. By comparison, the 12"/50-caliber Mark 8 gun of the Alaska-class large cruisers had a barrel life of 344 shots, while the 16"/50-caliber Mark 7 gun fitted in the Iowa-class battleships had a barrel life of 290 rounds. [2]

Most World War II large scale naval battles involving the US Navy were fought by carrier-based aircraft in the Pacific, and so the chief use of the US Navy's battleship guns was shore bombardment. Nonetheless, the Mark 6 guns saw ship-to-ship combat in the Pacific and European theaters. This was attributed to the fact that ships mounting the Mark 7 batteries, the Iowa class, were commissioned later than the Mark 6-equipped North Carolina and South Dakota classes, so they missed the Naval Battles of Casablanca and Guadalcanal, two of the few instances where the US Navy's battleships were deployed to fight other battleships. Operation Hailstone was the only instance when the Mark 7 guns were fired purely at surface ships, against two light cruisers and three destroyers, in a somewhat controversial surface action as US Navy carrier aircraft were available and could have achieved similar results. [15]

See also

Related Research Articles

<i>Montana</i>-class battleship Proposed class of American super-battleships

The Montana-class battleships were planned as successors of the Iowa class for the United States Navy, to be slower but larger, better armored, and with superior firepower. Five were approved for construction during World War II, but changes in wartime building priorities resulted in their cancellation in favor of continuing production of Essex-class aircraft carriers and Iowa-class battleships before any Montana-class keels were laid.

USS <i>Washington</i> (BB-47) Cancelled dreadnought battleship of the United States Navy

USS Washington (BB-47), a Colorado-class battleship, was the second ship of the United States Navy named in honor of the 42nd state. Her keel was laid down on 30 June 1919, at Camden, New Jersey, by the New York Shipbuilding Corporation. She was launched on 1 September 1921, sponsored by Miss Jean Summers, the daughter of Congressman John W. Summers of Washington.

<i>Iowa</i>-class battleship Fast battleship class of the United States Navy

The Iowa class was a class of six fast battleships ordered by the United States Navy in 1939 and 1940. They were initially intended to intercept fast capital ships such as the Japanese Kongō class and serve as the "fast wing" of the U.S. battle line. The Iowa class was designed to meet the Second London Naval Treaty's "escalator clause" limit of 45,000-long-ton (45,700 t) standard displacement. Beginning in August 1942, four vessels, Iowa, New Jersey, Missouri, and Wisconsin, were completed; two more, Illinois and Kentucky, were laid down but canceled in 1945 and 1958, respectively, before completion, and both hulls were scrapped in 1958–1959.

<span class="mw-page-title-main">16-inch/50-caliber Mark 7 gun</span> Naval gun

The 16"/50 caliber Mark 7 – United States Naval Gun is the main armament of the Iowa-class battleships and was the planned main armament of the cancelled Montana-class battleship.

<i>North Carolina</i>-class battleship US Navy fast battleship class (1937–1947)

The North Carolina class were a pair of fast battleships, North Carolina and Washington, built for the United States Navy in the late 1930s and early 1940s.

<i>Colorado</i>-class battleship Dreadnought battleship class of the United States Navy

The Colorado-class battleships were a group of four United States Navy super-dreadnoughts, the last of its pre-Treaty battleships. Designed during World War I, their construction overlapped the end of that conflict and continued in its immediate aftermath. Though all four keels were laid, only three ships entered service: Colorado, Maryland, and West Virginia. Washington was over 75% completed when she was canceled under the terms of the Washington Naval Treaty in 1922. As such, the 16" gun Colorado-class ships were the last and most powerful battleships built by the U.S. Navy until the North Carolina class entered service on the eve of World War II.

<i>Alaska</i>-class cruiser Late WWII-era class of "large cruisers" of the U.S. Navy

The Alaska-class were six large cruisers ordered before World War II for the United States Navy (USN), of which only two were completed and saw service late in the war. The USN designation for the ships of this class was 'large cruiser' (CB), a designation unique to the Alaska-class, and the majority of leading reference works consider them as such. However, various other works have alternately described these ships as battlecruisers despite the USN having never classified them as such, and having actively discouraged the use of the term in describing the class. The Alaskas were all named after territories or insular areas of the United States, signifying their intermediate status between larger battleships and smaller heavy and light cruisers.

<i>Florida</i>-class battleship Dreadnought battleship class of the United States Navy

The Florida-class battleships of the United States Navy comprised two ships: Florida and Utah. Launched in 1910 and 1909 respectively and commissioned in 1911, they were slightly larger than the preceding Delaware class design but were otherwise very similar. This was the first US battleship class in which all ships received steam turbine engines. In the previous Delaware-class, North Dakota received steam turbine propulsion as an experiment while Delaware retained triple-expansion engines.

<i>Delaware</i>-class battleship Dreadnought battleship class of the United States Navy

The Delaware-class battleships of the United States Navy were the second class of American dreadnoughts; the class comprised two ships: Delaware and North Dakota. With this class, the 16,000 long tons (16,257 t) limit imposed on capital ships by the United States Congress was waived, which allowed designers at the Navy's Bureau of Construction and Repair to correct what they considered flaws in the preceding South Carolina class and produce ships not only more powerful but also more effective and rounded overall. Launched in 1909, these ships became the first in US naval history to exceed 20,000 long tons (20,321 t).

The N3 class was a dreadnought battleship class designed for the Royal Navy after World War I, incorporating lessons learned from that conflict. They were similar in design to the G3-class battlecruiser, but had larger guns and thicker armour. They were never ordered due to signing of the Washington Naval Treaty in 1922, which limited the size and armament of battleships to 35,000 long tons (36,000 t) and guns no bigger than 16 inches (406 mm).

<i>South Dakota</i>-class battleship (1939) Fast battleship class of the United States Navy

The South Dakota class was a group of four fast battleships built by the United States Navy. They were the second class of battleships to be named after the 40th state; the first were designed in the 1920s and canceled under the terms of the Washington Naval Treaty. Four ships comprised the class: South Dakota, Indiana, Massachusetts, and Alabama. They were designed to the same treaty standard displacement limit of 35,000 long tons (35,600 t) as the preceding North Carolina class and had the same main battery of nine 16"/45 caliber Mark 6 guns in three-gun turrets, but were more compact and better protected. The ships can be visually distinguished from the earlier vessels by their single funnel, compared to twin funnels in the North Carolinas.

<i>South Dakota</i>-class battleship (1920) Cancelled dreadnought battleship class of the United States Navy

The first South Dakota class was a group of six battleships that were laid down in 1920 for the U.S. Navy, but were never completed; designed to achieve 23 knots, they represented an attempt to catch up with the increasing fleet speeds of its main rivals, the British Royal Navy and Imperial Japanese Navy.

<span class="mw-page-title-main">BL 14-inch Mk VII naval gun</span> Naval gun

The BL 14-inch Mk VII naval gun was a breech loading (BL) gun designed for the battleships of the Royal Navy in the late 1930s. This gun armed the King George V-class battleships during the Second World War.

Armament of the <i>Iowa</i>-class battleship Armament of WWII battleship

The Iowa-class battleships are the most heavily armed warships the United States Navy has ever put to sea, due to the continual development of their onboard weaponry. The first Iowa-class ship was laid down in June 1940; in their World War II configuration, each of the Iowa-class battleships had a main battery of 16-inch (406 mm) guns that could hit targets nearly 20 statute miles (32 km) away with a variety of artillery shells designed for anti-ship or bombardment work. The secondary battery of 5-inch (127 mm) guns could hit targets nearly 9 statute miles (14 km) away with solid projectiles or proximity fuzed shells, and was effective in an anti-aircraft role as well. Each of the four battleships carried a wide array of 20 mm and 40 mm anti-aircraft guns for defense against enemy aircraft.

<span class="mw-page-title-main">6-inch/47-caliber gun</span> Naval gun

The 6-inch/47-caliber Mark 16 gun was used in the main batteries of several pre-war and World War II US Navy light cruisers. They were primarily mounted in triple turrets and used against surface targets. The Mark 16DP gun was a dual-purpose fitting of the Mark 16 for use against aircraft as well as surface ships. It was installed in the postwar Worcester-class light cruisers and the anti-aircraft gunnery training ship Mississippi.

<span class="mw-page-title-main">14-inch/45-caliber gun</span> Large-caliber naval gun

The 14-inch/45-caliber gun,, whose variations were known initially as the Mark 1, 2, 3, and 5, and, when upgraded in the 1930s, were redesignated as the Mark 8, 9, 10, and 12. They were the first 14-inch (356 mm) guns to be employed by the United States Navy. The 14-inch/45-caliber guns were installed as the primary armament aboard all of the United States Navy's New York-class, Nevada-class, and Pennsylvania-class battleships. The gun also saw service in the British Royal Navy, where it was designated BL 14-inch gun Mk II.

<span class="mw-page-title-main">14-inch/50-caliber gun</span> Naval gun

The 14"/50 caliber gun was a naval gun mounted on New Mexico and Tennessee-class battleships. These ships also featured the first "three-gun" turrets, meaning that each gun in each turret could be "individually sleeved" to elevate separately. The 14"/50 caliber guns were designated as Mark 4 and 6, with later versions known as Mark 7, 11, and B. These guns were more powerful than the main gun mounted on the previous three classes of US battleships, the 14"/45 caliber gun.

<span class="mw-page-title-main">12-inch/50-caliber Mark 8 gun</span> Naval gun

The 12"/50 caliber gun Mark 8 was a US naval gun mounted on the Alaska-class cruiser. The gun, like the "large cruiser" that mounted it, was intended to fill the gap between US "heavy cruisers" (6-8") and US battleships (14-16"). The name describes the size of the shells, 12 inches in diameter, and the length of the bore in calibers.

<span class="mw-page-title-main">12-inch/45-caliber Mark 5 gun</span> Naval gun

The 12-inch/45-caliber Mark 5 gun was an American naval gun that first entered service in 1906. Initially designed for use with the Connecticut-class of pre-dreadnought battleships, the Mark 5 continued in service aboard the first generation of American dreadnoughts.

<span class="mw-page-title-main">16-inch/50-caliber Mark 2 gun</span> US Navy shipboard and coastal defence gun

The 16"/50 caliber Mark 2 gun and the near-identical Mark 3 were guns originally designed and built for the United States Navy as the main armament for the South Dakota-class battleships and Lexington-class battlecruisers. The successors to the 16"/45 caliber gun Mark I gun, they were at the time among the heaviest guns built for use as naval artillery.

References

  1. DiGiulian, Tony (11 July 2016). "United States of America 16"/45 (40.6 cm) Mark 5 and Mark 8". Navweaps.com. Retrieved 14 June 2017.
  2. 1 2 3 4 DiGiulian, Tony. "United States of America 16"/50 (40.6 cm) Mark 7". Navweaps.com. 11 June 2017. Web. 14 June 2017.
  3. 1 2 3 4 5 DiGiulian, Tony. "United States of America 16"/45 (40.6 cm) Mark 6". Navweaps.com. 11 July 2016. Web. 15 June 2017.
  4. 1 2 "Battleship comparison". Combinedfleet.com. Web. 7 August 2012.
  5. Trainor, Bernard E. "Iowa Blast Inquiry: Long Search Ahead". The New York Times , 23 April 1989. Accessed 12 July 2009.
  6. 1 2 "Massachusetts V (BB-59)". Dictionary of American Naval Fighting Ships . United States Navy. 6 August 2015. Retrieved 14 June 2017.
  7. Garzke & Dulin 1980 , pp. 103–107
  8. Atkinson (2002), p. 131
  9. "USS Enterprise – "Enterprise versus Japan"". Battle 360° . Season 1. Episode 5. The History Channel. Retrieved 23 April 2007..
  10. 1 2 Mindell, David (2002). Between Human and Machine . Baltimore: Johns Hopkins. pp.  262–263. ISBN   0-8018-8057-2.
  11. Clymer, A. Ben (1993). "The Mechanical Analog Computers of Hannibal Ford and William Newell" (PDF). IEEE Annals of the History of Computing. Massachusetts Institute of Technology. Archived from the original (PDF) on 9 September 2006. Retrieved 26 August 2006.
  12. Kirishima Damage Analysis by Robert Lundgren
  13. Friedman, pp. 310–311.
  14. Friedman, p. 311.
  15. USA 16"/45 (40.6 cm) Mark 6 – NavWeaps

Bibliography