Colorado-class battleship

Last updated

USS Colorado (BB-45) New York 1932.jpg
Colorado steaming off New York City, c. 1932
Class overview
NameColorado-class battleship
Builders
OperatorsFlag of the United States (1912-1959).svg  United States Navy
Preceded by Tennessee class
Succeeded by
Built1917–1923
In commission1921–1947
Planned4
Completed3
Cancelled1
Retired3
General characteristics [1]
Type Super-dreadnought battleship
Displacement32,600 long tons (33,100 t)
Length624 ft 3 in (190.27 m)
Beam97 ft 4 in (29.67 m)
Draft30 ft 6 in (9.30 m)
Installed power
Propulsion
Speed21 kn (39 km/h; 24 mph)
Range8,000 nmi (15,000 km; 9,200 mi) at 10 kn (19 km/h; 12 mph) (design) [2]
Complement1,080
Sensors and
processing systems
Armament
Armor

The Colorado-class battleships [lower-alpha 1] were a group of four United States Navy super-dreadnoughts, the last of its pre-Treaty battleships. Designed during World War I, their construction overlapped the end of that conflict and continued in its immediate aftermath. Though all four keels were laid, only three ships entered service: Colorado, Maryland, and West Virginia. Washington was over 75% completed when she was canceled under the terms of the Washington Naval Treaty in 1922. As such, the 16" gun Colorado-class ships were the last and most powerful battleships built by the U.S. Navy until the North Carolina class entered service on the eve of World War II.

Contents

The Colorados were the final group of the Standard-type battleships, designed to have similar speed and handling to simplify maneuvers with the line of battle. The cancelled South Dakota class which was to follow would have in several ways been a departure from this practice. Apart from an upgrade in striking power with their eight 16-inch guns, the Colorados were essentially repeats of the earlier Tennessee class. The Colorados were also the last American capital ships built with four main armament turrets and twin-mounted guns.

All three ships had extensive careers during World War II. Maryland and West Virginia were both present during the attack on Pearl Harbor on 7 December 1941. While Maryland escaped relatively unscathed, West Virginia was sunk in the shallow waters of the harbor but subsequently raised and repaired. All three ships served as naval gunfire support ships during numerous amphibious operations. Maryland and West Virginia were present at the last surface action between battleships, the Battle of Surigao Strait during the Battle of Leyte Gulf in October 1944. All three ships were placed into the reserve fleet after the end of the war and were scrapped by the late 1950s.

Design

Hull of Maryland under construction c. 1917 USS Maryland BB-46 Laid Down.jpg
Hull of Maryland under construction c. 1917

The construction of battleships armed with 16-inch guns was envisioned by the General Board of the United States Navy and Bureau of Construction and Repair (C&R) as early as 1913, as the upgrade in gun caliber promised twice the kinetic energy of the 12-inch gun then in service and half again as much as the 14-inch gun then being introduced. The 14-inch gun dominated the design of battleships between 1913 and 1916, just as the 12-inch gun had dictated designs from 1908 to 1910. However, while the General Board approved the 16-inch gun as early as 1911, George von Lengerke Meyer, the Secretary of the Navy, felt that a move to the larger gun caliber would make capital ships still on the drawing board obsolete. For this reason, he restricted the Bureau of Ordnance to proceed no further than blueprints for the new gun as a hedge against foreign developments. He finally approved construction of this gun in October 1912 and the weapon was test-fired successfully in August 1914. This success, along with the unofficial news in several naval publications of 15- and 16-inch weapons being adopted by the United Kingdom, Italy, Germany and Japan, led the Board to consider cancelling the construction of the Pennsylvania class in favor of an up-gunned design. Such a move meant an increase of 8,000 tons per ship, twice as much as the jump from the Nevadas to the Pennsylvanias. Debate continued for the next three years. Each year, President Woodrow Wilson's Secretary of the Navy, Josephus Daniels, balked at the potential increase in cost and ordered instead that the design features of the Standard Class be continued, but eventually compromised with the 1917 design battleships by allowing their armament to be upgraded. However, this was the only substantial change permitted. [3]

The design of the Colorado class was therefore adapted from the preceding Tennessee class; other than the significant improvement of eight 16 in (406 mm)/45 caliber guns in four dual turrets taking the place of the Tennessee-class's twelve 14 in (356 mm)/50 caliber guns in four triple turrets, there was no major difference between the two designs. Likewise, the Tennessees were the results of modifications to the New Mexico class, which had been the most modern U.S. Navy capital ships to see service in World War I and had attracted the attention of British constructors both serving with and outside C&R. This similarity would carry over into the Lexington and South Dakota classes as the U.S. Navy further standardized its capital ship designs. This was partly the result of wartime experience, when over 250 destroyers and more than 450 submarine chasers had to be built quickly for service in the North Atlantic. The U.S. Navy had done this by a process almost akin to the assembly line, sticking to one basic design per class with a maximum amount of standardization and rationalization. Since the Naval Act of 1916 meant the imminent construction of 16 battleships and six battlecruisers, it was necessary to streamline production to save time and labor. [1] [4] [5] [6]

Nevertheless, while U.S. battleships were standardized as much as possible, design improvements were incorporated whenever practicable. Most of the changes in the Colorados were incorporated prior to any of their keels being laid. However, plans for the underwater protection—the ships' main defense against torpedoes and shells that fell short of the ship but traveled through the water to hit underneath the waterline—could not be worked out in time. The problem was that tests in caissons—experiments that would eventually prove that a series of compartments divided between being filled with liquid and being left empty would be a very effective defense against torpedoes—were not yet complete. In order to commence construction of the ships as soon as possible, proposals sent to shipbuilding corporations noted that if they were selected to build the ships, alterations to the design of the ships three months after their keels were laid must be allowed. [7] [8]

General characteristics

USS Maryland in March 1944 USS Maryland bow view 1944.jpg
USS Maryland in March 1944

The Colorados were very similar overall to the Tennessees, with a 624-foot (190 m) overall length and a beam at the waterline of 97 feet (30 m). They displaced 32,600 long tons (33,100 t) at normal load and 33,590 long tons (34,130 t) at deep load and had a draft of 30.5 feet (9.3 m). As in the New Mexico and Tennessee classes, they were designed with a clipper bow to help keep the ships dryer in heavy seas, and also kept the secondary armament in the superstructure rather than in the upper hull (Pennsylvania and earlier classes), where the guns had proved to be excessively wet in heavy seas and thus were frequently unusable. [9] [7]

Propulsion

Turbo-electric transmission, which had been used in the prior class, was retained here. Advantages included the ability for the turbines to run at optimum speed without regard to propeller speed, which led to greater fuel economy and range, and an easier sub-division of machinery, which increased the ships' ability to withstand torpedo hits. Each of the four propeller shafts was powered by a 5,424 kilowatt electric motor, fed by two two-phase turbo generators (General Electric for Maryland, Westinghouse for Colorado and West Virginia) rated at 5,000 volts). Eight oil-fired Babcock & Wilcox water-tube boilers, each in its individual compartment, provided steam for the generators. Altogether, the ships' power plant was rated at 28,900 electrical horsepower (EHP) to provide a flank speed of 21 knots (39 km/h; 24 mph). With a maximum bunker capacity of 4570 tons, the Colorados' range without refueling at sea was 10,000 nautical miles (19,000 km; 12,000 mi). [10]

Armament

Main guns

The Colorado class was armed with eight 16-inch (406 mm)/45 caliber Mark 1 guns, which fired a 2,110-pound (960 kg) armor-piercing (AP) shell at a muzzle velocity of 2,600 feet per second (792 m/s) and a rate of about 1.5 rounds per minute to a range of 34,300 yards (31,400 m) at a maximum turret elevation of 30 degrees. Development of this weapon had begun in August 1913, using a bored-out and relined 13-inch (330 mm) Mark 2 gun, with the promise of twice the muzzle energy of the 12-inch (305 mm)/50 caliber Mark 7 guns and 50 percent more than the 14-inch /45 caliber weapon used on the New York-class battleships. After an initial proof firing in July 1914 and minor changes, the 16-inch Mark 1 was re-proved in May 1916 and production approved in January 1917. When the Colorados were modernized in the 1930s, these guns were rebuilt per standard navy practice and redesignated 16-inch/45 (40.6 cm) Mark 5 and Mark 8. [5]

Secondary guns

Fourteen 5-inch (127 mm)/51 caliber Mark 15 guns were installed to defend against enemy destroyers. This was reduced to 12 in 1922. The Mark 15 fired a 50-pound (23 kg) shell at a velocity of 3,150 feet per second (960 m/s) to a maximum range of 15,850 yards (9.0 statute miles or 14.5 kilometres) at 20 degrees [11] at a rate of seven rounds per minute and was extremely accurate, with a danger space longer than the range to the target for distances less than 3,000 yards (2,700 m). As in the New Mexico and Tennessee classes, these were mounted in unarmored casemates on the main deck, one deck higher than in previous classes, to allow them to be manned in heavy weather if necessary. [12] [11]

Heavily damaged at Pearl Harbour, in 1942 West Virginia began a major reconstruction that saw her Mark 15 guns removed and replaced with sixteen 5-inch (127 mm)/38 caliber Mark 12 dual-purpose guns in twin turrets. Urgently needed in the Pacific, Maryland and Colorado retained 8 of the prewar Mark 15s, in Colorado's case until the end of the war; [13] the twin turrets planned and later installed were at that time in short supply, and it was only in May 1945 that Maryland would be refitted with 16 5in/38 in 8 twin mountings as in West Virginia. The Mark 12 fired a 55.18-pound (25.03 kg) shell to a maximum range of 17,392 yards (15,903 m) and a maximum elevation of 37,200 feet (11,300 m) at an elevation of 45 degrees. [14] They had a high rate of fire due to their being hand-loaded but power-rammed and their capability for easy loading at any angle of elevation. The introduction of proximity-fused anti-aircraft shells in 1943 made the 5 in/38 even more potent in this capacity. [15]

Anti-aircraft guns

USS West Virginia in her final configuration, June 1944. Note 5 in/38 twin turrets and number of AA guns USS West Virginia 1944.jpg
USS West Virginia in her final configuration, June 1944. Note 5 in/38 twin turrets and number of AA guns

Four 3-inch (76 mm)/23 caliber guns were mounted initially for anti-aircraft (AA) defense. This was increased to eight guns in 1922. These guns fired a 3-inch (76 mm) shell at a muzzle velocity of 1,650 feet per second (500 m/s) to a maximum range of 8,800 yards (8,000 m) and ceiling of 18,000 feet (5,500 m) at an elevation of 45.3 degrees and a rate of between eight and nine rounds per minute. [16] These weapons were replaced in 1928–1929 with the same number of 5-inch (127 mm)/25 caliber guns, the first Navy gun designed specifically for AA use. They fired a 54-pound (24 kg) shell at a muzzle velocity of 2,155 feet per second (657 m/s) at a rate of between 15 and 20 rounds per minute to a maximum range of 14,500 yards (13,300 m) at an elevation of 45 degrees and a ceiling of 27,400 feet (8,400 m) at a maximum elevation of 85 degrees. [17] These weapons were supplemented with quadruple-mount (quad) 1.1-inch/75-caliber guns in 1937–1938. [18]

In 1942, the air defense system on these ships was overhauled completely. In addition to their 5 in/25s, they carried sixteen Bofors 40 mm guns in quad mounts and up to thirty-two Oerlikon 20 mm cannons in single mounts. The quad 40 mm Bofors fired a 1.985-pound (0.900 kg) shell at a rate of 120 rounds per minute per barrel nominal, 140 to 160 rounds per minute when horizontal (gravity assist), to a maximum range of 11,133 yards (10,180 m) at 45 degrees and a ceiling of 22,299 feet (6,797 m). The 20 mm Oerlikons fired a 0.271-pound (0.123 kg) shell at an average muzzle velocity of 2,725 feet per second (831 m/s) and a practical rate of between 250 and 320 rounds per minute to a maximum range of 4,800 yards (4,400 m) at 45 degrees and a ceiling of 10,000 feet (3,000 m). [19] [20] [21]

A second overhaul of AA defense was made between 1944 and 1945, as the Navy had found 20 mm shells too light to stop Japanese kamikaze planes; this plus the higher approach speeds of these planes made these manually-controlled guns obsolete. In their place, more quad 40 mm Bofors mounts were fitted. Maryland eventually carried 40 [22] 40 mm in 10 quad mountings and 36 20mm in 18 twin mountings [22] (a different source has her with forty-four 40mm in 11 quad mounts and forty-four 20mm in 20 twin and 1 quad mountings. [13] ) Colorado had either 32 [13] or 40 [19] 40mm in quad mountings but with 39 single, 8 twin and 1 quad 20mm. [13] West Virginia carried forty 40 mm in quad mountings and 64 20 mm guns in 58 single, one twin and one quad mounting [13] . [19] [20] [21]

Armor and underwater protection

The "all or nothing" armor scheme introduced in the Nevada-class battleships was continued here, as throughout the Standard-type warships, with armor suite virtually identical to the preceding Tennessee class. The exception was an increase in belt armor near vital machinery to 16 inches (406 mm) to correspond with the increased main gun caliber. Otherwise, the minimum thickness along the belt remained 14 inches. Upper deck armor was 3.6 inches (91 mm) initially and was later increased to 4.1 inches (104 mm). Lower deck armor ranged between 2.25 and 1.5 inches (57 and 38 mm) and was also presumably strengthened during conversion. [18]

As with the Tennessees, the Colorados were modernized in the 1930s to improve their staying power. A new underwater protection scheme featured five compartments separated by armored bulkheads 0.75 inches (19 mm) thick on either side of the ship: an outer empty one, three filled, and an empty inner one. In addition, the eight boilers were moved from their location in previous designs and placed in separate spaces to port and starboard of the turboelectric power plant. This arrangement formed another line of defense, which would allow the ship to sail if one or even an entire side of boilers was incapacitated. A consequence was the chief aesthetic change between the New Mexicos and Tennessees: the single large funnel of the former was replaced by two smaller funnels in the latter. [8] [23] Turret armor was 5" on the roofs, 8 on the sides and rears, and 18 on the faces. [24]

Other improvements imported from the Tennessee class included an attempt to move the forward torpedo room away from the 16-inch gun magazines, as the room was viewed as vulnerable. Also, the design called for the use of external, rather than internal, belt armor so that a "break in the continuity of the side structure" would not exist, which would minimize drag in the water and any corresponding waste of power. [8] [25]

Modifications

Illustration of the Colorado-class design, created in 1917 Colorado illustration.png
Illustration of the Colorado-class design, created in 1917

With fiscal year 1917 appropriations, bids on the four Colorados were opened on 18 October 1916; though Maryland's keel was laid on 24 April 1917, the other three battleships were not until 1919–1920. With the cancellation of the first South Dakota class, the Colorados were the last U.S. battleships to enter service for nearly two decades. They were also the final U.S. battleships to use twin gun turrets—the North Carolinas and second South Dakota classes had nine 16-inch/45 caliber guns and the Iowas used nine 16 in/50 caliber [1] [26] [27] in three triple turrets.

Inter-war modernization

Plans for modernization of the Tennessee and Colorado classes were made in October 1931, in part to take advantage of loopholes in the Washington Naval Treaty. While reconstruction under this treaty was allowed only to increase protection from air and underwater attack, it could include improvements in fire control and increased elevation for main armament as these items were not listed in the treaty. Also, any changes made inside the hull could be justified as meant to increase protection, even if the outcome meant increased speed or longer operational range, since the term "blister" had been specified to limit changes only outside the hull, such as main armor belt thickness and main gun caliber. Modifications to the secondary battery were also outside the purview of the Washington Treaty. [28]

Included in initial plans was some protection against chemical shells which contained poisonous gas, although the General Board stated in the late 1920s that decontaminating a battleship hit with these shells would not be possible—the ship would have to be scuttled. Also, the deck armor was to be bolstered with 80 lb (36 kg)-special treatment steel (STS)—which would add 1,319 long tons (1,340 t; 1,477 short tons) to the displacement of the ships—the armor on the tops of the main turrets was to be made thicker, fire controls were to be improved with the latest technology, and new shells for the main guns were to be designed. Two (later four) quad 1.1-inch guns were to be added, and all of the machinery in place would be removed in favor of newer equipment so that the ships would not lose any speed with the great increase in weight.Anti-torpedo bulges were also to be installed to improve buoyancy but not to increase the ships' beams any greater than 106 feet (32 m) so they could still use the Panama Canal when transferring from the Atlantic to the Pacific and vice verse. These improvements were estimated to cost about $15,000,000 per ship ($71,723,000 total). However, with the country in the throes of the Great Depression, not much money was available for the Navy. Savings of $26,625,000 could be realized by reconditioning the propulsion machinery rather than replacing it, which would lower the ships' speed. Adding protection against chemical shells could be dropped, along with development of the new shells. Nevertheless, the cost-saving elements of the later proposal were later dropped. The Navy asked the Secretary of the Navy to request money in the fiscal year 1933 to modernize the two classes from Congress, but the depression worsened. Although proposals for modifications were still made, plans were put on hold and never carried out. [29]

West Virginia in October 1935 off Hawaii USS West Virginia Oct 1935.jpg
West Virginia in October 1935 off Hawaii

In the beginning of 1934, the Bureau of Construction and Repair proposed that the "Big Five"—the two Tennessees and three Colorados—be fitted with anti-torpedo bulges so that the ships could benefit from increased buoyancy; because of, among other factors, the normal procedure of leaving port with the maximum amount of fuel possible on board, the five ships were quite overweight and rode low in the water. For example, in June 1935, Tennessee had a normal operating displacement of 38,200 long tons (38,800 t; 42,800 short tons)—more than 2,000 long tons (2,032 t; 2,240 short tons) above the maximum emergency load her original design called for. This made her draft higher—meaning that the ship's waterline was down 5 ft 4 in (1,630 mm). Construction and Repair called for a bulge on the Colorados that would displace about 2,000 long tons (2,032 t; 2,240 short tons) and raise the ships' draft by 20 in (510 mm). Installing these would be a year's worth of work, with each ship spending six months of that in a dry dock—the first month docked so that the hull shape could be determined, the next six sailing while the bulge was built, and the last five back in the dock so it could be added to the ship. [30]

Three years later (1937), the various Navy bureaus held a joint meeting to discuss a possible partial modernization of the Tennessees and Colorados. They were much different than the changes proposed in 1933; there were no provisions for extra deck armor, but many additions and replacements. To gain space for newer fire control systems, the ships were to be reboilered. The main and secondary battery fire controls were to be replaced, including new rangefinders and plotting room instruments for the main, while new Mark 33 anti-aircraft fire control directors were planned. The mainmast and M2 Brownings would be removed, and studies of the feasibility of a torpedo bulge, the addition of which Construction and Repair believed to be paramount, which would increase the beam to 108 ft (33 m) and displacement to 39,600 long tons (40,200 t; 44,400 short tons). Varying plans for these were complete by October 1938. None was a full reconstruction; costs ranged from $8,094,000 to $38,369,000 per ship. However, as the money for the improvements would lessen the amount available for new battleship construction, and these would be better than any reconstructed old battleship, the Secretary of the Navy rejected these plans in November. Congress did appropriate $6,600,000 in 1939 for some of these improvements, including the bulges. [30]

World War II changes

With the beginning of World War II in Europe, the Navy began to apply lessons learned by the British to U.S. ships. The Board under Ernest J. King of 1940–1941 proposed sweeping changes to the secondary armament of the battleships to increase their defense against air attacks. These included the removal of all 5 in/25 caliber guns and 5 in/51 in favor of the dual-purpose 5 in/38, the addition of six quad 1.1-inch guns, and the cutting away of superstructure to clear arcs of fire for the new anti-aircraft weapons. An ultimate secondary battery of sixteen 5 in/38 in dual mounts, sixteen Bofors 40 mm in quadruple mounts and eight single Oerlikon 20 mm guns was called for by the board in 1941, although they were not certain the ships could handle the added weight and it would take a large amount of time in dry dock for these modifications to take place. With these concerns, an interim measure of four quad 1.1-inch guns was proposed by the board; however, the gun was not being produced in any great number very quickly, so a second interim solution was implemented. 3 in (76 mm)/50 caliber guns were added to all of the U.S. battleships except for Arizona and Nevada by June 1941; these were replaced on the three battleships in the Atlantic by the quad 1.1-inch guns by November—they received them first because they were closer to a war zone. [31]

As these modifications were carried out upon the various battleships, much additional weight was added onto the already overweight ships, forcing torpedo bulges to be added so that a decent freeboard could be maintained. These would cost $750,000 and around three or four months in a dry dock. The King Board suggested that the deck armor be bolstered and 5 in/38 dual-purpose guns be added, but the Chief of Naval Operations decreed that any major changes such as these had to wait due to the wars raging around the world at the time. The addition of bulges, however, was approved for the "Big Five", with each ship spending three months in dry dock at the Puget Sound Naval Shipyard. Maryland would be first (17 February 1941 to 20 May), followed by West Virginia (10 May to 8 August), Colorado (28 July to 28 October), Tennessee (19 January 1942 to 21 April) and California (16 March to 16 June). [lower-alpha 2] However, the estimates for how long the addition of bulges would take were too low; Puget Sound believed that they could complete work on Maryland in 123 calendar days (about four months)—if the work would be given a priority equal to that of Saratoga 's refit and higher than new construction. [30]

Only two of the ships had bulges added to them through this program, Maryland (completed 1 August 1941) and Colorado (26 February 1942); the attack on Pearl Harbor interrupted the refits intended for West Virginia and the two Tennessees. The surprise strike did not touch Colorado, which was at Puget Sound, and did not hurt Maryland very badly; however, West Virginia was severely damaged and needed a major refit at minimum. [32]

Maryland on 9 February 1942, little changed from her pre-war configuration USS Maryland 9 Feb 1942.jpg
Maryland on 9 February 1942, little changed from her pre-war configuration

Little to no major modifications were made to the two active Colorados in the opening months of the U.S.'s entry into the war; all of the battleships in the Pacific Fleet had a constant order to be ready to sail within 48 hours in case of a Japanese attempt to invade Hawaii or the West Coast and could not be spared for any major yard work. Colorado was hurried through the rest of her refit with the addition of essential items like radar, splinter protection, fourteen Oerlikon 20 mm and four quad 1.1-in guns; Maryland received a similar treatment later, the only difference being sixteen 20 mm guns and no 1.1-in guns. Although tower masts were constructed for Colorado and Maryland and a majority of their aft cage masts were cut down by the ships' crews in the beginning of 1942, the ships could not be spared the time needed to install the new masts. The tower masts were placed into storage and not used until early 1944. [33]

Colorado and Maryland were greatly needed in the war zone, and as such did not undergo a major refit until 1944, although minor additions and removals, mainly to the anti-aircraft weaponry, were made in-between. Throughout the war, both ships saw their anti-aircraft battery changed constantly. Beginning in 1942, they carried eight 5 in/25, four quad 1.1-in guns, a greatly varying number of 20 mm guns, and eight .50 caliber machine guns. In June 1942, Colorado had fourteen 20 mm guns; just five months later, this was upped to twenty-two, with thirty-six temporarily approved for a later time. By February 1943, both Colorado and Maryland had two more quad 1.1-in guns added (for a total of six mounts) and forty-eight total 20 mm guns; a month later she was given an additional ten .50 caliber machine guns. November 1943 saw the removal of two of the single-purpose 5 in/51, the six quad 1.1-in guns, and a small number of 20 mm guns (six on Colorado and eight on Maryland) in favor of thirty-two Bofors 40 mm guns – six quad and two twin. [34]

Both ships finally underwent major refits in 1944. Here their remaining aft cage masts were taken off in favor of the tower masts, the two twin 40 mm replaced by quads, a quadruple 20 mm added, and a new radar fitted. Although more extensive refits were proposed by Admiral Ernest J. King, including the addition of eight twin 5 in/38, more advanced fire control systems, and a second protective deck plating, the Bureau of Ships, after demonstrating what would have to be removed as compensation for the weight added for King's ideas, counter-proposed that a smaller reconstruction, like the ones given to the New Mexico class, would be more desirable. However, no action was taken until Maryland was struck by a kamikaze aircraft. While undergoing repair, eight twin 5 in/38 were added, but nothing else; her conning tower was removed and replaced by a 50 lb (23 kg) special-treated steel structure to balance the additional weight of the 5 in guns. [35]

Ships in class

Construction data
Ship nameHull no.BuilderLaid downLaunchedCommissionedDecommissionedFate
Colorado BB-45 New York Shipbuilding Corporation, Camden, New Jersey 29 May 191922 March 192130 August 19237 January 1947Struck 1 March 1959; Sold for scrap, 23 July 1959
Maryland BB-46 Newport News Shipbuilding Company, Newport News, Virginia 24 April 191720 March 192021 July 19213 April 1947Struck 1 March 1959; Sold for scrap, 8 July 1959
Washington BB-47New York Shipbuilding Corporation, Camden, New Jersey30 June 19191 September 1921Cancelled after signing of Washington Naval Treaty; Sunk as target, 25 November 1924
West Virginia BB-48Newport News Shipbuilding Company, Newport News, Virginia12 April 192017 November 19211 December 19239 January 1947Struck 1 March 1959; Sold for scrap, 24 August 1959

USS Colorado

USS Colorado USS Colorado (BB-45) - NH 64516.jpg
USS Colorado

USS Colorado (BB-45) was the third ship of the United States Navy named in honor of the 38th state. Her keel was laid down on 29 May 1919 by the New York Shipbuilding Corporation of Camden, New Jersey. She was launched on 22 March 1921 and commissioned on 30 August 1923, Captain R. R. Belknap in command. During her career, Colorado was involved in various ceremonies and fleet exercises, and assisted residents of Long Beach, California following the 1933 earthquake. In 1937, she was one of several ships that searched for Amelia Earhart after she and her plane went missing. Colorado was at Puget Sound undergoing overhaul at the time of the attack on Pearl Harbor on 7 December 1941. [36]

After extensive training maneuvers along the West Coast, Colorado returned to Pearl Harbor in April 1942. From November 1942 to September 1943 she was stationed in the South West Pacific. [36] In November 1943, she participated in operations against the Japanese during both the Gilbert and Marshall Islands campaign and Mariana and Palau Islands campaign, and shelled Luzon and Okinawa in advance of the planned amphibious assaults there. Following the end of World War II Colorado participated in Operation Magic Carpet before being decommissioned in 1947. She was sold for scrap in 1957. [37]

USS Maryland

USS Maryland Uss maryland bb.jpg
USS Maryland

USS Maryland (BB-46) was the third ship of the United States Navy to be named in honor of the seventh state. Her keel was laid down on 24 April 1917 by the Newport News Shipbuilding Company of Newport News, Virginia. She was launched on 20 March 1920 and commissioned on 21 July 1921, Captain C.F. Preston in command. During her career she made a goodwill voyage to Australia and New Zealand in 1925, and transported President-elect Herbert Hoover on the Pacific leg of his tour of Latin America in 1928. Throughout the 1920s and 1930s, she served as a mainstay of fleet readiness through multiple training exercises. [38]

In 1940, Maryland changed her base of operations to Pearl Harbor. She was moored at Battleship Row next to Ford Island during the Japanese attack on Pearl Harbor on 7 December 1941. Damaged during the attack, Maryland reported to Puget Sound, where she was repaired and modernized. Maryland supported the amphibious landings during the Battle of Tarawa, and thereafter participated in the Gilbert and Marshall Islands campaign, the Mariana and Palau Islands campaign, the Battle of Peleliu, the Philippines campaign, and the Battle of Okinawa. Following the end of World War II Maryland participated in Operation Magic Carpet before being decommissioned in 1947. She was sold for scrap in 1959. [38]

USS Washington

USS Washington USS Washington BB-47.jpg
USS Washington

USS Washington (BB-47) was the second ship of the United States Navy named in honor of the 42nd state. Her keel was laid down on 30 June 1919 by the New York Shipbuilding Corporation of Camden, New Jersey. She was launched on 1 September 1921, but on 8 February 1922, two days after the signing of the Washington Naval Treaty, all construction work ceased on the 75.9% completed dreadnought. [39] [40]

The ship was towed out to sea off the Virginia Capes in November 1924 to be used as a gunnery target. On the first day of testing, the ship was hit by two 400-pound (180 kg) torpedoes and three 1 short ton (0.91 t) near-miss bombs with minor damage and a list of three degrees. On that day, the ship had 400 pounds of TNT detonated on board, but she remained afloat. Two days later, the ship was hit by fourteen 14-inch (360 mm) shells dropped from 4,000 feet (1,200 m), but only one penetrated. The ship was finally sunk on 26 November 1924 by the battleships New York and Texas with fourteen 14-inch shell hits. After the test, it was determined that the existing deck armor on battleships was inadequate, and that future battleships should be fitted with triple bottoms. [41]

USS West Virginia

USS West Virginia Uss west virginia bb.jpg
USS West Virginia

USS West Virginia (BB-48) was the second ship of the United States Navy named in honor of the 35th state. Her keel was laid down on 12 April 1920 by the Newport News Shipbuilding Company of Newport News, Virginia. She was launched on 17 November 1921 and commissioned on 1 December 1923, Captain Thomas J. Senn in command. Despite a grounding incident early in her career West Virginia received high acclaim for gunnery and armor protection, and was involved in exercises to test the defenses of the Hawaiian Islands in the 1930s. On the morning of 7 December 1941, West Virginia was sunk at her berth in Battleship Row by multiple Japanese torpedo and bomb hits, but thanks in large part to counterflooding the battleship settled on an even keel, similar to California. Refloated on 17 May 1942, West Virginia received sufficient temporary repairs to sail to Puget Sound for reconstruction and modernization. [42]

In July 1944 she departed Puget Sound and rejoined the Pacific Fleet for combat operations on the eve of the Philippines campaign. There she participated in the Battle of Surigao Strait, the last battleship vs battleship duel of World War II, where her new Mk. 8 fire-control radar enabled her to hit the Yamashiro with her first salvo – in the dark – at 22,800 yards (20,800 m). In February 1945 West Virginia participated in the Battle of Iwo Jima, initially by preinvasion bombardment, and later by callfire support for the ground forces on the island. Her last combat operations were during the Battle of Okinawa; after the surrender of Japan, she participated in Operation Magic Carpet. Decommissioned in 1947, she was sold for scrap in 1959. [42]

See also

Related Research Articles

USS <i>Washington</i> (BB-47) Cancelled dreadnought battleship of the United States Navy

USS Washington (BB-47), a Colorado-class battleship, was the second ship of the United States Navy named in honor of the 42nd state. Her keel was laid down on 30 June 1919, at Camden, New Jersey, by the New York Shipbuilding Corporation. She was launched on 1 September 1921, sponsored by Miss Jean Summers, the daughter of Congressman John W. Summers of Washington.

USS <i>Colorado</i> (BB-45) Dreadnought battleship of the United States Navy

USS Colorado (BB-45) was a battleship of the United States Navy that was in service from 1923 to 1947. She was the lead ship of the Colorado class of battleships. Her keel was laid down on 29 May 1919, by the New York Shipbuilding Corporation. She was launched on 22 March 1921, and commissioned on 30 August 1923. She was armed with eight 16-inch (406 mm) guns and fourteen 5-inch (127 mm) deck guns; two 5-inch guns were removed in an overhaul.

<i>Tennessee</i>-class battleship Dreadnought battleship class of the United States Navy

The Tennessee class consisted of two super-dreadnought battleships—Tennessee and California—built for the United States Navy in the late 1910s, part of the "standard" series. The class was in most respects a repeat of the preceding New Mexico class, with the primary improvements being a significantly strengthened underwater protection system, and increased elevation of the main battery guns to allow them to fire at much greater ranges. They carried the same main battery of twelve 14-inch (356 mm) guns in four triple turrets, and had the same top speed of 21 knots. Both ships served in the Pacific Fleet for the duration of their careers, which included an extensive training program during the interwar period of the 1920s and 1930s.

USS <i>Maryland</i> (BB-46) Dreadnought battleship of the United States Navy

USS Maryland (BB-46), also known as "Old Mary" or "Fighting Mary" to her crewmates, was a Colorado-class battleship. She was the third ship of the United States Navy to be named in honor of the seventh state. She was commissioned in 1921, and serving as the flagship of the fleet, cruised to Australia, New Zealand, and Brazil.

<i>Iowa</i>-class battleship Fast battleship class of the United States Navy

The Iowa class was a class of six fast battleships ordered by the United States Navy in 1939 and 1940. They were initially intended to intercept fast capital ships such as the Japanese Kongō class while also being capable of serving in a traditional battle line alongside slower battleships and act as its "fast wing". The Iowa class was designed to meet the Second London Naval Treaty's "escalator clause" limit of 45,000-long-ton (45,700 t) standard displacement. Beginning in August 1942, four vessels, Iowa, New Jersey, Missouri, and Wisconsin, were completed; two more, Illinois and Kentucky, were laid down but canceled in 1945 and 1958, respectively, before completion, and both hulls were scrapped in 1958–1959.

<i>North Carolina</i>-class battleship US Navy fast battleship class (1937–1947)

The North Carolina class were a pair of fast battleships, North Carolina and Washington, built for the United States Navy in the late 1930s and early 1940s.

<i>New Mexico</i>-class battleship Dreadnought battleship class of the United States Navy

The New Mexico class was a class of three super-dreadnought battleships built for the United States Navy in the late 1910s. The class comprised three ships: New Mexico, the lead ship, Mississippi, and Idaho. Part of the standard series, they were in most respects copies of the Pennsylvania-class battleships that immediately preceded them, carrying over the same main battery arrangement of twelve 14-inch (356 mm) guns, but now increased to 50-caliber. They incorporated several other improvements, including a better arrangement of the secondary battery that increased its usability, a clipper bow that improved seakeeping, and an experimental turbo-electric propulsion system adopted on New Mexico. Like the other standard-type battleships, they had a top speed of 21 knots that allowed the fleet to operate as a tactically homogeneous unit.

<i>Florida</i>-class battleship Dreadnought battleship class of the United States Navy

The Florida-class battleships of the United States Navy comprised two ships: Florida and Utah. Launched in 1910 and 1909 respectively and commissioned in 1911, they were slightly larger than the preceding Delaware class design but were otherwise very similar. This was the first US battleship class in which all ships received steam turbine engines. In the previous Delaware-class, North Dakota received steam turbine propulsion as an experiment while Delaware retained triple-expansion engines.

<i>Pennsylvania</i>-class cruiser Class of American naval ships

The Pennsylvania class of six armored cruisers served in the United States Navy from 1905 to 1927. All six were renamed for cities 1912–1920, to make the state names available for the new battleships beginning with the Pennsylvania-class battleships. All of these served during World War I, with California being the only ship of the class to be lost. The remaining five armored cruisers were scrapped between 1930 and 1931 in accordance with the London Naval Treaty.

<i>Delaware</i>-class battleship Dreadnought battleship class of the United States Navy

The Delaware-class battleships of the United States Navy were the second class of American dreadnoughts. With this class, the 16,000 long tons (16,257 t) limit imposed on capital ships by the United States Congress was waived, which allowed designers at the Navy's Bureau of Construction and Repair to correct what they considered flaws in the preceding South Carolina class and produce ships not only more powerful but also more effective and rounded overall. Launched in 1909, these ships became the first in US naval history to exceed 20,000 long tons (20,321 t).

<i>New York</i>-class battleship Dreadnought battleship class of the United States Navy

The New York class was a pair of super-dreadnought battleships built for the United States Navy between 1911 and 1914. The two ships of the class, New York and Texas, saw extensive service beginning in the occupation of Veracruz, World War I, and World War II.

<i>South Dakota</i>-class battleship (1939) Fast battleship class of the United States Navy

The South Dakota class was a group of four fast battleships built by the United States Navy. They were the second class of battleships to be named after the 40th state; the first were designed in the 1920s and canceled under the terms of the Washington Naval Treaty. Four ships comprised the class: South Dakota, Indiana, Massachusetts, and Alabama. They were designed to the same treaty standard displacement limit of 35,000 long tons (35,600 t) as the preceding North Carolina class and had the same main battery of nine 16"/45 caliber Mark 6 guns in three-gun turrets, but were more compact and better protected. The ships can be visually distinguished from the earlier vessels by their single funnel, compared to twin funnels in the North Carolinas.

<i>South Dakota</i>-class battleship (1920) Cancelled dreadnought battleship class of the United States Navy

The first South Dakota class was a group of six battleships that were laid down in 1920 for the U.S. Navy, but were never completed; designed to achieve 23 knots, they represented an attempt to catch up with the increasing fleet speeds of its main rivals, the British Royal Navy and Imperial Japanese Navy.

<span class="mw-page-title-main">3-inch/50-caliber gun</span> Naval gun

The 3"/50 caliber gun in United States naval gun terminology indicates the gun fired a projectile 3 inches (76 mm) in diameter, and the barrel was 50 calibers long. Different guns of this caliber were used by the U.S. Navy and U.S. Coast Guard from 1900 through to 1990 on a variety of combatant and transport ship classes.

<span class="mw-page-title-main">5-inch/51-caliber gun</span> * Naval gun * Coastal defence * Coast Guard gun

5"/51 caliber guns initially served as the secondary battery of United States Navy battleships built from 1907 through the 1920s, also serving on other vessels. United States naval gun terminology indicates the gun fired a projectile 5-inch (127 mm) in diameter, and the barrel was 51 calibers long.

<span class="mw-page-title-main">5-inch/25-caliber gun</span> Anti-aircraft gun

The 5"/25 caliber gun entered service as the standard heavy anti-aircraft (AA) gun for United States Washington Naval Treaty cruisers commissioned in the 1920s and 1930s. The goal of the 5"/25 design was to produce a heavy AA gun that was light enough to be rapidly trained manually. The gun was also mounted on pre-World War II battleships and aircraft carriers until replaced by the standard widespread dual-purpose 5"/38 caliber gun, which was derived from the 5"/25. Guns removed from battleships were probably converted for submarine use by late 1943, while a purpose-built variant for submarines was available in mid-1944, and was widely used by them. United States naval gun terminology indicates the gun fired a projectile 5 inches (127 mm) in diameter, and the barrel was 25 calibers long. It is referred to sometimes as a dual purpose gun and sometimes as an anti-aircraft gun, because of its comparative weakness against surface targets.

<i>Columbia</i>-class cruiser Class of American naval ships

The Columbia-class cruisers were two protected cruisers constructed in 1890 and 1891 and used by the United States Navy. They were lightly gunned ships with only moderate armor that were built for the speed needed to overtake and destroy the fast ocean liners of the day as commerce raiders. However, the light armament and armor left these ships over-specialized and outclassed by ordinary similar sized protected cruisers that they might encounter. Also, the engines were expensive to operate and at full power the ships' range was greatly decreased. Due to the ongoing size and speed race in ocean liners, by 1907 they were outclassed in speed by the ill-fated Lusitania and the German liner Kronprinzessin Cecilie.

<span class="mw-page-title-main">16-inch/50-caliber Mark 2 gun</span> *Naval gun *Coastal defense gun

The 16"/50 caliber Mark 2 gun and the near-identical Mark 3 were guns originally designed and built for the United States Navy as the main armament for the South Dakota-class battleships and Lexington-class battlecruisers. The successors to the 16"/45 caliber gun Mark I gun, they were at the time among the heaviest guns built for use as naval artillery.

<i>Lexington</i>-class battlecruiser US class of battlecruiser

The Lexington-class battlecruisers were officially the only class of battlecruiser to ever be ordered by the United States Navy. While these six vessels were requested in 1911 as a reaction to the building by Japan of the Kongō class, the potential use for them in the U.S. Navy came from a series of studies by the Naval War College which stretched over several years and predated the existence of the first battlecruiser, HMS Invincible. The fact they were not approved by Congress at the time of their initial request was due to political, not military considerations.

<span class="mw-page-title-main">16-inch/45-caliber Mark 6 gun</span> Naval gun

The 16"/45 caliber Mark 6 gun is a naval gun designed in 1936 by the United States Navy for their Treaty battleships. It was introduced in 1941 aboard their North Carolina-class battleships, replacing the originally intended 14"/50 caliber Mark B guns and was also used for the follow-up South Dakota class. These battleships carried nine guns in three three-gun turrets. The gun was an improvement to the 16"/45 caliber guns used aboard the Colorado class, and the predecessor to the 16"/50 caliber Mark 7 gun used aboard the Iowa class.

References

Notes

  1. The class is sometimes referred to as the Maryland class. European conventions name a class of ship after the first unit to be completed — in this case, Maryland was finished first.
  2. The Colorado's and West Virginia's refits were later swapped, explaining why the former was at Puget Sound and the latter was at Pearl Harbor on 7 December 1941.

Citations

  1. 1 2 3 Gardiner & Gray 1985, p. 118.
  2. Friedman 1985, p. 445.
  3. Friedman 1985, pp. 116, 118.
  4. Friedman 1985, pp. 128, 137.
  5. 1 2 DiGiulian 2008 (Mark 1).
  6. Breyer 1974, pp. 223, 226.
  7. 1 2 Friedman 1985, p. 134.
  8. 1 2 3 Gardiner & Gray 1985, p. 117.
  9. Breyer 1973, p. 193.
  10. Breyer 1973, pp. 193, 230.
  11. 1 2 DiGiulian 2012 (5"/51).
  12. Breyer 1973, p. 226.
  13. 1 2 3 4 5 Sturton 2008, p. 217.
  14. Breyer 1974, p. 189.
  15. DiGiulian 2012 (5"/38).
  16. DiGiulian 2011 (3"/23).
  17. DiGiulian 2011 (5"/25).
  18. 1 2 Breyer 1973, p. 230.
  19. 1 2 3 Breyer 1973, pp. 230–232.
  20. 1 2 DiGiulian 2011 (40mm).
  21. 1 2 DiGiulian 2012 (20mm).
  22. 1 2 McDonald 2023, p. 210.
  23. Friedman 1985, pp. 134, 137, 225.
  24. Lenton, Henry (1968). American Battleships, Carriers, and Cruisers. Garden City, NY: Doubleday & Company INC. p. 29. LCCN   68-14047.
  25. Friedman 1985, pp. 134, 137.
  26. Friedman 1985, pp. 137, 420–421.
  27. Gardiner & Chesneau 1980, pp. 97–100.
  28. Friedman 1985, p. 189.
  29. Friedman 1985, pp. 139, 203.
  30. 1 2 3 Friedman 1985, p. 207.
  31. Friedman 1985, pp. 207, 353.
  32. Friedman 1985, pp. 207, 345.
  33. Friedman 1985, p. 356.
  34. Friedman 1985, p. 364.
  35. Friedman 1985, pp. 364, 368.
  36. 1 2 Newhart 1995, p. 65.
  37. DANFS Colorado (BB-45).
  38. 1 2 DANFS Maryland (BB-46).
  39. DANFS Washington (BB-47).
  40. Ferguson 2007, p. 57.
  41. Friedman 1985, p. 186.
  42. 1 2 DANFS West Virginia (BB-48).

Bibliography

Online sources