Illinois-class battleship

Last updated

USS Illinois BB-7.jpg
USS Illinois, the lead ship of the class
Class overview
Operators US flag 45 stars.svg United States
Preceded by Kearsarge class
Succeeded by Maine class
Built1896–1901
In commission1900–1920
Completed3
Retired3
General characteristics
Type Pre-dreadnought battleship
Displacement
Length375 ft 4 in (114.40 m) loa
Beam72 ft 3 in (22.02 m)
Draft23 ft 6 in (7.16 m)
Installed power
Propulsion
Speed16 knots (30 km/h; 18 mph)
Crew536
Armament
Armor

The Illinois class was a group of three pre-dreadnought battleships of the United States Navy commissioned at the beginning of the 20th century. The three ships, Illinois, Alabama, and Wisconsin, were built between 1896 and 1901. They were transitional ships; they incorporated advances over preceding designs, including the first modern gun turrets for the main battery, and new rapid-firing secondary guns, but they were also the last American battleships to feature dated technologies like fire-tube boilers and Harvey armor. They were armed with a main battery of four 13-inch (330 mm) guns in two twin turrets, supported by a secondary battery of fourteen 6 in (150 mm) guns. The ships had a designed speed of 16 knots (30 km/h; 18 mph), though they exceeded that speed by a significant margin.

Contents

The three ships served in a variety of roles and locations throughout their career. Illinois served with the North Atlantic Squadron and the European Squadron early in her career, while Wisconsin served as the flagship of the Pacific Fleet and then in the Asiatic Fleet. Illinois and Alabama started the cruise of the Great White Fleet in December 1907 from the east coast of the United States, though by the time they had rounded South America and stopped in California, Alabama was forced to leave the fleet due to machinery problems. Wisconsin joined the fleet there and continued on with it to the conclusion of its tour in February 1909. All three ships were modernized in 1909 and served in the Atlantic Fleet for a short time.

By 1912, all three ships had been reduced to the reserve fleet and were primarily employed as training ships. They continued in this role during World War I, training men to operate the machinery of warships and transports for the war effort. They were all decommissioned by 1920. Illinois was loaned to the New York Naval Militia and was converted into a floating arsenal. Renamed Prairie State in 1941, she was eventually sold for scrapping in 1956. Wisconsin was broken up for scrap in 1922, while Alabama was expended as a target ship in September 1921 in bombing tests with the US Army Air Service.

Design

Design work on what became the Illinois class began on 25 March 1896, when Rear Admiral J. G. Walker convened a board to consider future battleship designs. At the time, the only modern battleship in service was the low-freeboard Indiana; the high-freeboard battleship Iowa and the low-freeboard Kearsarge class were under construction. As the Navy had little experience with modern battleships, the question settled on whether to repeat one of the low-freeboard designs, which were suitable for coast defense, to build another Iowa, or to request a new design altogether. The Walker Board determined that another coastal battleship design would be imprudent, since the United States had long coastlines and therefore the new ships would need to have better seakeeping qualities than the Indiana or Kearsarge designs. [1]

War games conducted by the fleet led the board to specify a draft of no more than 23 feet (7 m) to allow the ships to enter the comparatively shallow ports of the Gulf Coast. This limitation had a significant effect on the design; to meet it, weight would have to be kept to a minimum, which prevented copying the Iowa design outright, unless the main armament was reduced from 13-inch (330 mm) to 12 in (305 mm) guns. The board was unwilling to make that concession, and so a new design would be required. In addition, the board had determined that the 8 in (203 mm) secondary gun was unnecessary, since though it could penetrate the thinner casemate armor on enemy battleships, it could not deliver a high-explosive shell through the armor. Instead, the board decided that a new 6 in (152 mm) rapid-firing gun would be superior. It would also simplify the ammunition supply, since there would be only one secondary caliber. [1]

The board determined that the armor layout of the Kearsarge design was sufficient and adopted it without change for the new ships. They discarded the superposed turrets of the Kearsarges, though, by mounting most of the secondary guns in a battery amidships. A new turret design for the main battery was adopted; instead of the old, round Monitor-style turrets of earlier ships, the Illinois' design featured a balanced turret with sloped armor on the face. Since it was balanced, it would prevent the ship from listing when the battery was trained to either broadside, as was the case with the Indianas. [2] The US Congress authorized three new battleships on 10 June 1896; the Bureau of Construction and Repair issued its requests for tenders from the various American shipbuilding companies twelve days later. Contracts for the new ships, to be named Illinois, Alabama, and Wisconsin, were awarded on 28 August. [1]

General characteristics and machinery

Plan and profile drawing of the Illinois class Illinois-class battleship plan and profile.jpg
Plan and profile drawing of the Illinois class

The ships of the Illinois class were 368 feet (112 m) long at the waterline and 374 ft (114 m) long overall. They had a beam of 72 ft 3 in (22.02 m) and a draft of 23 ft 6 in (7.16 m). They displaced 11,565 long tons (11,751  t ) as designed and up to 12,250 long tons (12,450 t) at full load. As built, they were fitted with heavy military masts, but these were replaced by cage masts in 1909. They had a crew of 40 officers and 496 enlisted men. The crew increased to 690713 later in her career. Steering was controlled with a single rudder, and the ships had a turning radius of 362 yards (331 m) at a speed of 12 knots (22 km/h; 14 mph). The ships' transverse metacentric height was 2.7 feet (0.82 m). [3] [4]

The ships were powered by two-shaft triple-expansion steam engines rated at 16,000 indicated horsepower (12,000 kW). Steam was provided by eight coal-fired fire-tube boilers that were trunked into a pair of funnels that were arranged side-by-side. They were the last ships of the US Navy to use fire-tube boilers; subsequent designs changed to more efficient and lighter water-tube boilers. The engines generating a top speed of 16 knots (30 km/h; 18 mph), though they exceeded their rated performance on trials, with Illinois reaching 17.45 knots (32.32 km/h; 20.08 mph) on 12,757 ihp (9,513 kW). The ships could store up to 1,270 long tons (1,290 t) of coal, which allowed them to steam for 4,190 nautical miles (7,760 km; 4,820 mi) at a cruising speed of 10 knots (19 km/h; 12 mph). [3] [5] [4]

Armament

The ships were armed with a main battery of four 13 in (330 mm)/35 caliber guns [lower-alpha 1] guns in two twin gun turrets on the centerline, one forward and aft. [3] These guns fired a 1,130-pound (510 kg) shell with a 500 lb (230 kg) brown powder charge, though this was replaced with a 180 lb (82 kg) smokeless powder charge, which produced a muzzle velocity of 2,000 feet per second (610 m/s). [6] The gun had a range of 12,500 yards (11,400 m), though Navy regulations prescribed opening fire at 8,000 yards (7,300 m); even this was beyond the range at which gunners at the time could reliably hit. At a range of 2,000 yards (1,800 m), the shells could penetrate 20 inches (510 mm) of steel. The gun was slow-firing, requiring 320 seconds between shots. [7] The guns were mounted in Mark IV turrets, which had a range of elevation of 15 degrees to -5 degrees. The turrets required the guns to return to 2 degrees for loading. Ammunition storage was 60 shells per gun. [8]

The secondary battery consisted of fourteen 6 in (152 mm)/40 caliber Mark IV guns, which were placed in casemates in the hull. They fired a 105 lb (48 kg) shell at a muzzle velocity of 2,150 ft/s (660 m/s). [3] [9] For close-range defense against torpedo boats, they carried sixteen 57 mm (2.2 in) 6-pounder guns mounted in casemates along the side of the hull and six 37 mm (1.5 in) 1-pounder guns. These guns fired 6.03 lb (2.74 kg) and 1.088 lb (0.494 kg) shells, respectively. [3] [10] As was standard for capital ships of the period, the Illinois class carried four 18 in (457 mm) torpedo tubes in above-water, hull mounted torpedo launchers. [3] They were initially equipped with the Mark II Whitehead design, which carried a 140-pound (64 kg) warhead and had a range of 800 yards (730 m) at a speed of 27 knots (50 km/h; 31 mph). [11]

Armor

All three ships were protected with Harvey armor; they were the last ships of the US Navy to rely entirely on Harvey steel. The ships' main armored belt was 16.5 in (419 mm) thick over the magazines and the machinery spaces and reduced to 9.5 in (241 mm) on the lower edge. It gradually reduced to 4 in (102 mm) toward the bow. Transverse bulkheads that were 12 in (305 mm) thick connected both ends of the central belt and the main battery barbettes. The ships' armored deck was 2.75 in (70 mm) thick on the flat portion, with 3 in (76 mm) thick sloped sides forward; the sloped sides aft were 5 in (127 mm) thick. The conning tower had 10 in thick sides with a 2 in (51 mm) thick roof. [4]

The main battery gun turrets had 14-inch (356 mm) thick faces and 3 in (76 mm) thick roofs, and the supporting barbettes had 15 in (381 mm) of armor plating on their exposed sides. The portion of the barbettes that were behind the belt armor were reduced to 10 in (254 mm). Armor that was 6 in (152 mm) thick protected the secondary battery, and the lower half of the casemate armor was backed by coal bunkers, which increased the level of protection. Anti-splinter bulkheads that were 1.5 in (38 mm) thick were placed between each of the secondary guns to reduce the possibility of one shell from disabling multiple guns. [4]

Ships in class

Construction data
NameBuilder [3] Laid down [3] Launched [3] Commissioned [3]
USS Illinois (BB-7) Newport News Shipbuilding & Drydock Company 10 February 18974 October 189816 September 1901
USS Alabama (BB-8) William Cramp & Sons 2 December 189618 May 189816 October 1900
USS Wisconsin (BB-9) Union Iron Works 9 February 189726 November 18984 February 1901

Service history

Wisconsin c. 1909-10 after her modernization USS Wisconsin c. 1909-10.tiff
Wisconsin c. 190910 after her modernization

From their commissioning, Alabama and Illinois served with the North Atlantic Squadron. Both ships made visits to Europe during their early careers, and Illinois served as the flagship of the European Squadron for a short time in 1902. She accidentally ran aground outside Oslo, Norway, in 1902 and returned to the North Atlantic Squadron in January 1903. Wisconsin, having been built on the west coast of the United States, instead served in the Pacific Fleet as its flagship. In 1903, she was transferred to the Asiatic Fleet, and remained there until late 1906 when she returned to California. [lower-alpha 2]

Illinois and Alabama steamed with the Great White Fleet on its world cruise that started in December 1907. Wisconsin joined the fleet after it had rounded South America in July 1908; Alabama had to leave the fleet owing to engine damage that required repairs. [lower-alpha 2] Alabama was detached along with the battleship Maine; the two ships continued the journey independently and on a greatly shortened itinerary. The rest of the ships then crossed the Pacific and stopped in Australia, the Philippines, and Japan before continuing on through the Indian Ocean. They transited the Suez Canal and toured the Mediterranean before crossing the Atlantic, arriving bank in Hampton Roads on 22 February 1909 for a naval review with President Theodore Roosevelt. [15]

The three ships were modernized after their return in 1909; from 1912, they were placed in reserve commission and employed as training ships for midshipmen from the US Naval Academy and naval militia units. They continued in this role through World War I, which the United States entered on 6 April 1917. The ships trained engine room personnel, armed guards for merchant ships, and other specialties. [lower-alpha 2] Following the German surrender in November 1918, most of the battleships of the Atlantic Fleet were used as transports to ferry American soldiers back from France. The Illinois-class ships were not so employed, however, owing to their short range and small size, which would not permit sufficient additional accommodations. [16]

The Illinois-class ships served with the fleet only briefly after the war, still as training ships. By 1920, they had all been decommissioned. Wisconsin was sold for scrapping in January 1922 and broken up for scrap. Illinois was instead converted into a floating armory for the New York Naval Militia; renamed Prairie State in 1941, she served in this role until 1956, when she too was sold for scrap. Alabama met a more spectacular end as a target ship for bombing experiments conducted with the US Army Air Service in September 1921. [lower-alpha 2] She was hit with several bombs, including white phosphorus weapons and 2,000-pound (910 kg) armor-piercing bombs, before eventually foundering. [17]

Footnotes

Notes

  1. /35 refers to the length of the gun in terms of calibers. A /35 gun is 35 times long as it is in bore diameter.
  2. 1 2 3 4 See the DANFS entries for Illinois, [12] Alabama, [13] and Wisconsin, [14]

Citations

Related Research Articles

<i>Montana</i>-class battleship Proposed class of American super battleships

The Montana-class battleships were planned as successors of the Iowa class for the United States Navy, to be slower but larger, better armored, and with superior firepower. Five were approved for construction during World War II, but changes in wartime building priorities resulted in their cancellation in favor of continuing production of Essex-class aircraft carriers and Iowa-class battleships before any Montana-class keels were laid.

USS <i>Iowa</i> (BB-4) Pre-dreadnought battleship of the United States Navy

USS Iowa was a pre-dreadnought battleship built for the United States Navy in the mid-1890s. The ship was a marked improvement over the previous Indiana-class battleships, correcting many of the defects in the design of those vessels. Among the most important improvements were significantly better seaworthiness owing to her greater freeboard and a more efficient arrangement of the armament. Iowa was designed to operate on the high seas, which had been the impetus to increase the freeboard. She was armed with a battery of four 12-inch (305 mm) guns in two twin-gun turrets, supported by a secondary battery of eight 8-inch (203 mm) guns.

USS <i>Alabama</i> (BB-8) Pre-dreadnought battleship of the United States Navy

USS Alabama (BB-8) was an Illinois-class pre-dreadnought battleship built for the United States Navy. She was the second ship of her class, and the second to carry her name. Her keel was laid down in December 1896 at the William Cramp & Sons shipyard, and she was launched in May 1898. She was commissioned into the fleet in October 1900. The ship was armed with a main battery of four 13-inch (330 mm) guns and she had a top speed of 16 knots.

USS <i>Kearsarge</i> (BB-5) Kearsarge-class pre-dreadnought battleship

USS Kearsarge (BB-5), was a pre-dreadnought battleship of the United States Navy and lead ship of her class of battleships. She was named after the sloop-of-war Kearsarge, famous for sinking the CSS Alabama, and was the only United States Navy battleship not named after a state.

USS <i>New Jersey</i> (BB-16) Pre-dreadnought battleship of the United States Navy

USS New Jersey (BB-16) was the fourth of five Virginia-class battleships of the United States Navy, and the first ship to carry her name. She was laid down at the Fore River Shipbuilding Company in Quincy, Massachusetts, in May 1902, launched in November 1904, and commissioned into the fleet in May 1906. The ship was armed with an offensive battery of four 12-inch (305 mm) guns and eight 8-inch (203 mm) guns, and she was capable of a top speed of 19 knots.

USS <i>Illinois</i> (BB-7) Pre-dreadnought battleship of the United States Navy

USS Illinois (BB-7) was a pre-dreadnought battleship built for the United States Navy. She was the lead ship of the Illinois class, and was the second ship of the U.S. Navy to be named for the 21st state. Her keel was laid down in February 1897 at the Newport News Shipbuilding & Dry Dock Company, and she was launched in October 1898. She was commissioned in September 1901. The ship was armed with a main battery of four 13-inch (330 mm) guns and she had a top speed of 16 knots.

USS <i>Illinois</i> (BB-65) Iowa-class fast battleship

USS Illinois (BB-65) was the fifth Iowa-class fast battleship that was laid down for the United States Navy during World War II in the 1940s, although she would not be completed. The Navy had initially planned on building four of the Iowas and then developing a new, more powerful ship for what was to be BB-65. The pressing need for more warships at the outbreak of World War II in Europe led the Navy to conclude that new designs would have to be placed on hold to allow the shipbuilding industry to standardize on a small number of designs. As a result, BB-65 was ordered to the Iowa design in 1940. Illinois was laid down in December 1942, but work was given a low priority, and was still under construction at the end of World War II. She was canceled in August 1945, but her hull remained as a parts hulk until she was broken up in 1958.

USS <i>Wisconsin</i> (BB-9) Pre-dreadnought battleship of the United States Navy

USS Wisconsin (BB-9), an Illinois-class pre-dreadnought battleship, was the first ship of the United States Navy to be named for the 30th state. She was the third and final member of her class to be built. Her keel was laid down in February 1897 at the Union Iron Works in San Francisco, and she was launched in November 1898. The completed ship was commissioned into the fleet in February 1901. The ship was armed with a main battery of four 13-inch (330 mm) guns and she had a top speed of 16 knots.

<i>Tennessee</i>-class battleship Dreadnought battleship class of the United States Navy

The Tennessee class consisted of two super-dreadnought battleships—Tennessee and California—built for the United States Navy in the late 1910s, part of the "standard" series. The class was in most respects a repeat of the preceding New Mexico class, with the primary improvements being a significantly strengthened underwater protection system, and increased elevation of the main battery guns to allow them to fire at much greater ranges. They carried the same main battery of twelve 14-inch (356 mm) guns in four triple turrets, and had the same top speed of 21 knots. Both ships served in the Pacific Fleet for the duration of their careers, which included an extensive training program during the interwar period of the 1920s and 1930s.

<i>Wyoming</i>-class battleship Dreadnought battleship class of the United States Navy

The Wyoming class was a pair of dreadnought battleships built for the United States Navy. Wyoming and Arkansas were authorized in early 1909, and were built between 1910 and 1912. These were the fourth dreadnought design of the US Navy, but only an incremental improvement over the preceding Florida class, and the last US battleships to use 12-inch guns. The primary changes were the adoption of a more powerful 12 in (305 mm)/50 caliber Mark 7 gun, addition of a sixth twin-gun turret and improved armor protection, including the first use of a torpedo bulkhead on American battleships. The Navy considered using more powerful 14-inch (356 mm) guns, but this would have caused delays and required larger docks.

<i>Nevada</i>-class battleship Dreadnought battleship class of the United States Navy

The Nevada class comprised two dreadnought battleships—Nevada and Oklahoma—built for the United States Navy in the 1910s. They were significant developments in battleship design, being the first in the world to adopt "all or nothing" armor, a major step forward in armor protection because it emphasized protection optimized for long-range engagements before the Battle of Jutland demonstrated the need for such a layout. They also introduced three-gun turrets and oil-fired water-tube boilers to the US fleet. The two Nevadas were the progenitors of the standard-type battleship, a group that included the next four classes of broadly similar battleships that were intended to be tactically homogeneous.

<i>New Mexico</i>-class battleship Dreadnought battleship class of the United States Navy

The New Mexico class was a class of three super-dreadnought battleships built for the United States Navy in the late 1910s. The class comprised three ships: New Mexico, the lead ship, Mississippi, and Idaho. Part of the standard series, they were in most respects copies of the Pennsylvania-class battleships that immediately preceded them, carrying over the same main battery arrangement of twelve 14-inch (356 mm) guns, but now increased to 50-caliber. They incorporated several other improvements, including a better arrangement of the secondary battery that increased its usability, a clipper bow that improved seakeeping, and an experimental turbo-electric propulsion system adopted on New Mexico. Like the other standard-type battleships, they had a top speed of 21 knots that allowed the fleet to operate as a tactically homogeneous unit.

<i>Kearsarge</i>-class battleship Pre-dreadnought battleship class of the United States Navy

The Kearsarge-class was a group of two pre-dreadnought battleships built for the United States Navy in the 1890s. The two ships—USS Kearsarge and USS Kentucky—represented a compromise between two preceding battleship designs, the low-freeboard Indiana class and the high-freeboard USS Iowa, though their design also incorporated several improvements. Their primary advances over earlier designs consisted of new quick-firing guns and improved armor protection, but their most novel feature was their two-story gun turrets that consisted of a secondary 8-inch (203 mm) gun turret fixed to the top of their primary 13-inch (330 mm) turrets. The ships suffered from a number of problems, however, including a tertiary battery mounted too low in the hull and poorly-designed turrets, though the latter were attempted again with the Virginia class in the early 1900s, also with negative results.

<i>Maine</i>-class battleship Pre-dreadnought battleship class of the United States Navy

The three Maine-class battleships—Maine, Missouri, and Ohio—were built at the turn of the 20th century for the United States Navy. Based on the preceding Illinois class, they incorporated several significant technological advances over the earlier ships. They were the first American battleships to incorporate Krupp cemented armor, which was stronger than Harvey armor, smokeless powder, which allowed for higher-velocity guns and water-tube boilers, which were more efficient and lighter. The Maines were armed with four 12-inch (305 mm) guns and sixteen 6-inch (152 mm) guns, and they could steam at a speed of 18 knots, a significant increase over the Illinois class.

<i>Virginia</i>-class battleship Pre-dreadnought battleship class of the United States Navy

The Virginia class of pre-dreadnought battleships were built for the United States Navy in the early 1900s. The class comprised five ships: Virginia, Nebraska, Georgia, New Jersey, and Rhode Island. The ships carried a mixed-caliber offensive battery of four 12-inch (305 mm) and eight 8-inch (203 mm) guns; these were mounted in an uncommon arrangement, with four of the 8-inch guns placed atop the 12-inch turrets. The arrangement proved to be a failure, as the 8-inch guns could not be fired independently of the 12-inch guns without interfering with them. Additionally, by the time the Virginias entered service, the first "all-big-gun" battleships—including the British HMS Dreadnought—were nearing completion, which would render mixed battery ships like the Virginia class obsolete.

<i>Connecticut</i>-class battleship Pre-dreadnought battleship class of the United States Navy

The Connecticut class of pre-dreadnought battleships were the penultimate class of the type built for the United States Navy. The class comprised six ships: Connecticut, Louisiana, Vermont, Kansas, Minnesota, and New Hampshire, which were built between 1903 and 1908. The ships were armed with a mixed offensive battery of 12-inch (305 mm), 8-inch (203 mm), and 7-inch (178 mm) guns. This arrangement was rendered obsolete by the advent of all-big-gun battleships like the British HMS Dreadnought, which was completed before most of the Connecticuts entered service.

<i>Mississippi</i>-class battleship Class of American pre-dreadnoughts

The Mississippi class of battleships comprised two ships which were authorized in the 1903 naval budget: Mississippi and Idaho; these were named for the 20th and 43rd states, respectively. These were the last pre-dreadnought battleships to be designed for the United States Navy, but not the last to be built, because one more ship of a prior design was completed later under the 1904 naval budget. While the quality and technology of the weaponry and armor were first-rate, these ships included a variety of main, intermediate, secondary, and tertiary gun sizes in a predreadnought configuration which became obsolete before the ships were completed.

<i>South Dakota</i>-class battleship (1939) Fast battleship class of the United States Navy

The South Dakota class was a group of four fast battleships built by the United States Navy. They were the second class of battleships to be named after the 40th state; the first were designed in the 1920s and canceled under the terms of the Washington Naval Treaty. Four ships comprised the class: South Dakota, Indiana, Massachusetts, and Alabama. They were designed to the same treaty standard displacement limit of 35,000 long tons (35,600 t) as the preceding North Carolina class and had the same main battery of nine 16"/45 caliber Mark 6 guns in three-gun turrets, but were more compact and better protected. The ships can be visually distinguished from the earlier vessels by their single funnel, compared to twin funnels in the North Carolinas. According to naval historians William Garzke and Robert Dulin, the South Dakota design was the best "treaty battleship" ever built.

In the years before the outbreak of World War I in 1914, the French Navy considered several proposals for battlecruisers. The Navy issued specifications for a battlecruiser design to complete part of the 28 capital ships to be built by 1920. Three designs, one by P. Gille and two by Lieutenant Durand-Viel, were completed in 1913. All three designs were similar to contemporary battleship designs, specifically the Normandie class, which introduced a quadruple gun turret for the main battery, which was adopted for all three proposals. The first two called for the same 340 mm (13.4 in) gun used on all French super-dreadnoughts, though the third proposed a much more powerful 370 mm (14.6 in) gun. Though the design studies were complete, the French Navy did not authorize or begin construction of any battlecruisers before the start of the war.

References

Further reading