USS Baltimore (C-3)

Last updated

Baltimore (Cruiser 3). Starboard bow, 1891 - NARA - 512896.jpg
Baltimore in 1891
History
US flag 48 stars.svgUnited States
NameBaltimore
Namesake Baltimore, Maryland
Builder William Cramp & Sons, Philadelphia
Cost$1,546,172.13 (hull and machinery)
Yard number254
Laid down5 May 1887
Launched6 October 1888
Sponsored byMrs. Theodore D. Wilson, wife of Chief Constructor Wilson
Commissioned7 January 1890
Decommissioned15 September 1922
ReclassifiedCM-1
Stricken14 October 1937
Identification
FateScuttled, 22 September 1944
General characteristics
Displacement4,413 long tons (4,484 t)
Length336 ft (102 m)
Beam48 ft 6 in (14.78 m)
Draft20 ft 6 in (6.25 m)
Installed power
Propulsion2 × screws
Speed19 knots (35 km/h; 22 mph)
Complement386 officers and men
Armament
Armor

The fourth USS Baltimore (C-3) (later CM-1) was a United States Navy cruiser, the fifth protected cruiser to be built by an American yard. Like the previous one, Charleston, the design was commissioned from the British company of W. Armstrong, Mitchell, and Company of Newcastle. Baltimore was an all-around improvement on Charleston, somewhat larger with more guns, thicker armor, and better machinery. [1] [2] [3]

Contents

Design

Baltimore was built to plans purchased from Armstrong, a British manufacturer, which were similar to an unsuccessful Armstrong bid for the Spanish cruiser Reina Regente. [1] [3] Unlike the preceding Charleston, these plans included a modern triple expansion engine designed by Humphrys, Tennant & Co. [2] Baltimore's initial cost for hull and machinery was $1,546,172.13. [4]

Baltimore was armed with four 8-inch (203 mm)/35 caliber Mark 4 guns in sponsons on either side of the bow and stern, and six 6-inch (152 mm)/30 caliber Mark 3 guns [5] in sponsons along the sides. Secondary armament was four 6-pounder (57 mm (2.2 in)) guns, two 3-pounder (47 mm (1.85 in)) Hotchkiss revolving cannon, two 1-pounder (37 mm (1.5 in)) Hotchkiss revolving cannon, and two .45 caliber (11.4 mm) Gatling guns. [1] [3] Four 14-inch (356 mm) torpedo tubes were included in the design but never mounted. [2]

Baltimore had 4.5 in (110 mm) gun shields and a 3 in (76 mm) thick armored conning tower. The armored deck was up to 4 in (100 mm) on its sloped sides and 2.5 in (64 mm) elsewhere. [1]

The as-built engineering plant included four coal-fired cylindrical boilers producing steam for two horizontal triple expansion engines totaling 10,750  ihp (8,020  kW ) for a designed speed of 19 knots (35 km/h; 22 mph), although 20 knots (37 km/h; 23 mph) was achieved on trials. [1] [3] Baltimore was among the first US Navy ships with the more powerful and efficient triple expansion engines. Unlike some contemporary designs, no sails were fitted. Baltimore carried 400 tons of coal for a range of 3,838  nmi (7,108  km ; 4,417  mi ) at 10 kn (19 km/h; 12 mph); this could be increased to 850 tons for 8,155  nmi (15,103  km ; 9,385  mi ). [3]

Refits

Baltimore was rebuilt between 1900 and 1903 with the armament replaced by 12 6-inch (152 mm)/40 caliber Mark 7 guns, [5] the 8-inch guns being removed. [1] The secondary armament was replaced (or augmented) by six 3-inch (76 mm)/50 caliber guns. [2] The boilers were replaced with eight Babcock & Wilcox boilers. [1] In 1913 and 1914 she was converted into a minelayer at the Charleston Navy Yard with four 6"/40 guns and a capacity of 180 mines. [2] In an armament upgrade for World War I, between 1917 and 1918, her guns were replaced with four 5-inch (127 mm)/51 caliber guns and two 3-inch (76 mm)/50 caliber anti-aircraft guns. [1] [2]

Construction and Service history

Drawing showing the side and top view of the Baltimore Baltimore (ship, 1890) - Brassey's 1887.png
Drawing showing the side and top view of the Baltimore

She was launched on 6 October 1888 by William Cramp & Sons Ship and Engine Building Company, in Philadelphia, sponsored by Mrs. Theodore D. Wilson, wife of Chief Constructor Theodore D. Wilson; and commissioned on 7 January 1890, with Captain W. S. Schley in command. [6]

Pre-Spanish–American War

Baltimore became the flagship of the North Atlantic Squadron on 24 May 1890, and, from 15 to 23 August, conveyed the remains of the late Captain John Ericsson from New York City to Filipstad in Värmland, Sweden.

After cruising in European and Mediterranean waters with the European Squadron, she arrived at Valparaíso, Chile on 7 April 1891 to join the Pacific Squadron. She protected American citizens during the Chile revolution and landing men at Valparaíso on 28 August. Her activities in Chile around this time became known as the Baltimore Crisis where two United States Navy sailors from its crew were stabbed in front of the True Blue Saloon on 16 October 1891. Arriving at the Mare Island Navy Yard on 5 January 1892, she cruised on the west coast of the U.S. until 7 October and then returned to the Atlantic. She took part in the naval rendezvous and review in Hampton Roads during March and April 1893, prior to the World's Columbian Exposition. Proceeding via the Suez Canal, she cruised as flagship of the Asiatic Station from 22 December 1893 to 3 December 1895, protecting American interests. Returning to Mare Island on 21 January 1896, she went out of commission on 17 February. [6]

Spanish–American War

Recommissioned on 12 October 1897, Baltimore sailed on 20 October for the Hawaiian Islands and remained there from 7 November 1897 to 25 March 1898. She then joined Commodore George Dewey's squadron at Hong Kong on 22 April. The squadron sailed from Mirs Bay, China on 27 April for the Philippines, and on the morning of 1 May entered Manila Bay and destroyed the Spanish fleet stationed there. Baltimore was second in line behind Olympia. In the Battle of Manila Bay, Baltimore was commanded by future Rear Admiral Nehemiah Dyer, who had served with Farragut at Mobile Bay. [6]

Baltimore remained in the Philippines on the Asiatic Station as the Spanish–American War transitioned into the Philippine–American War, convoying transports and protecting American interests until 23 May 1900, when she sailed for the United States, via the Suez Canal, arriving at New York on 8 September. In one instance, just before the outbreak of the Philippine–American War, the Baltimore sailed for Iloilo City accompanying troops whose mission was to occupy the city before General Martin Delgado's forces, loosely part of Emilio Aquinaldo's Philippine Revolutionary Army, could do so. [7] When the American forces arrived, General Delgado already occupied the city in the name of the Federal State of the Visayas. [7] After several weeks of a tense but peaceful stand-off, American troops and ships, including the Baltimore withdrew to Manila without landing on either Panay or Guimaras islands. [7]

Pre-World War I

Between 27 September 1900 and 6 May 1903, Baltimore was out of commission at New York Navy Yard. From 5 August to 23 December, she served with the Caribbean Squadron, North Atlantic Fleet, taking part in summer maneuvers off the coast of Maine, in the Presidential Review at Oyster Bay, New York (15–17 August), and in Santo Domingo waters. From 28 May to 26 August 1904, she was attached to the European Squadron and cruised in the Mediterranean. On 26 September, she sailed from Genoa, Italy, for the Asiatic Station and spent the next two years cruising in Asiatic, Philippine, and Australian waters. [6]

Baltimore returned to New York on 24 April 1907 and went out of commission at New York Navy Yard on 15 May. On 20 January 1911, she was placed in commission in reserve and served as a receiving ship at Charleston Navy Yard (30 January 1911 – 20 September 1912). From 1913 to 1914, she was converted to a minelayer at the Charleston Navy Yard and recommissioned on 8 March 1915. From 1915 to 1918, she carried out mining experiments and operations in the Chesapeake Bay and along the Atlantic coast. [6]

World War I

At the time of the American entry into World War I, Baltimore was training personnel. Early in March 1918, she was detailed to assist in laying a deep minefield off the north coast of Ireland in the North Channel. [6] She arrived at the Clyde on 8 March, and, from 13 April to 2 May, laid approximately 900 mines in the North Channel. On 2 June, she joined Mine Squadron 1 at Inverness, Scotland, and for four months participated in laying the North Sea Mine Barrage between the Orkney Islands and Norway by laying a total of 1,260 mines:

On 28 September, Baltimore sailed from Scapa Flow, Orkney Islands back to the U.S. She carried out mining experiments in the vicinity of the Virgin Islands until the end of the year. [6]

Inter-war period

USS Baltimore in partially salvaged condition being examined by Seabees of the 133rd Naval Construction Battalion at Naval Station Pearl Harbor USS Baltimore being examined by Seabees of the 133rd Naval Construction Battalion.jpg
USS Baltimore in partially salvaged condition being examined by Seabees of the 133rd Naval Construction Battalion at Naval Station Pearl Harbor
USS Baltimore being scuttled by Seabees. USS Baltimore sinking.jpg
USS Baltimore being scuttled by Seabees.

In September 1919, she joined the Pacific Fleet, received the designation CM-1 (cruiser minelayer), and remained on the West Coast until January 1921. She then proceeded to Pearl Harbor, where she was subsequently placed out of commission on 15 September 1922. She then served as a receiving ship at Pearl Harbor, and was present during the Japanese attack there on 7 December 1941. She was sold for scrapping on 16 February 1942, [6] but she was eventually towed out to sea and scuttled by Seabee demolition men on 22 September 1944. [2] In August 2017, the wreck was discovered by Hawaii Undersea Research Laboratory (HURL) off the south shore of Oahu. In September 2017, the Baltimore was revisited by the Okeanos Explorer and surveyed in detail for photogrammetry.

Related Research Articles

USS <i>Brooklyn</i> (ACR-3) United States Navy armored cruiser

USS Brooklyn (ACR-3/CA-3) was the third United States Navy armored cruiser, the only one to be named at commissioning for a city rather than a state.

USS <i>New Orleans</i> (CL-22) United States Navy warship

USS New Orleans was a United States Navy protected cruiser of the New Orleans class.

USS <i>Newark</i> (C-1) Protected cruiser

The first USS Newark (C-1) was a United States Navy protected cruiser, the eighth protected cruiser launched by the United States. In design, she succeeded the "ABC" cruisers Atlanta, Boston, and Chicago with better protection, higher speed, and a uniform 6-inch gun armament. Four additional protected cruisers were launched for the USN prior to Newark.

USS <i>New York</i> (ACR-2) Second United States Navy armored cruiser so designated

USS New York (ACR-2/CA-2) was the second United States Navy armored cruiser so designated; the first was the ill-fated Maine, which was soon redesignated a second-class battleship. Due to the unusually protracted construction of Maine, New York was actually the first armored cruiser to enter U.S. Navy service. The fourth Navy ship to be named in honor of the state of New York, she was later renamed Saratoga and then Rochester. With six 8-inch guns, she was the most heavily armed cruiser in the US Navy when commissioned.

USS <i>Boston</i> (1884) Early U.S. Navy "ABCD" ship

The fifth USS Boston was a protected cruiser and one of the first steel warships of the "New Navy" of the 1880s. In some references she is combined with Atlanta as the Atlanta class, in others as the Boston class.

USS <i>Chicago</i> (1885) Protected cruiser of the US Navy

The first USS Chicago was a protected cruiser of the United States Navy, the largest of the original three authorized by Congress for the "New Navy" and one of the U.S. Navy's first four steel ships.

USS <i>Charleston</i> (C-2)

The second USS Charleston (C-2) was a United States Navy protected cruiser — the fourth US protected cruiser to be built. Lacking experience in building steel cruisers, the design was purchased from the British company Armstrong, Mitchell and Co. of Newcastle, the construction to be by an American shipyard. In design, she succeeded the "ABC" cruisers Atlanta, Boston, and Chicago with better protection, higher speed, and similar armament.

USS <i>Dolphin</i> (PG-24) Gunboat of the United States Navy

USS Dolphin (PG-24) was a gunboat/dispatch vessel; the fourth ship of the United States Navy to share the name. Dolphin was the first U.S. Navy ship to fly the flag of the president of the United States during President Chester A. Arthur's administration, and the second Navy ship to serve as a presidential yacht.

USS <i>Philadelphia</i> (C-4)

The fourth USS Philadelphia (C-4) was the sixth protected cruiser of the United States Navy. Although designed by the Navy Department, her hull was similar to the preceding British-designed Baltimore, but Philadelphia had a uniform main armament of twelve 6-inch guns.

USS <i>Atlanta</i> (1884)

USS Atlanta was a protected cruiser and one of the first steel warships of the "New Navy" of the 1880s. In some references she is combined with Boston as the Atlanta class, in others as the Boston class.

USS <i>Hart</i> (DD-110) Wickes-class destroyer

USS Hart (DD-110) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Trenton</i> (CL-11) Omaha-class light cruiser

USS Trenton (CL-11) was an Omaha-class light cruiser, originally classified as a scout cruiser, of the United States Navy. She was the second Navy ship named for the city of Trenton, New Jersey. She spent most of her pre-war career moving between the Atlantic and the Pacific. Trenton joined the Special Service Squadron in 1934, for a good-will tour of Latin America. In May 1939, she would join Squadron 40-T in protecting American interests during the Spanish Civil War and not return to the US until July 1940, when she carried the royal family of Luxembourg, fleeing from the Nazi occupation of their country.

USS <i>Raleigh</i> (CL-7) Omaha-class light cruiser

USS Raleigh (CL-7) was the fourth Omaha-class light cruiser, originally classified as a scout cruiser, built for the United States Navy. She was the second Navy ship named for the city of Raleigh, North Carolina, the first being the protected cruiser Raleigh, commissioned in 1894, and decommissioned in 1919.

USS <i>Sicard</i> Clemson-class destroyer

USS Sicard (DD-346/DM-21/AG-100) was a United States Navy Clemson-class destroyer in commission from 1920 to 1945. She was service during World War II. She was named for Rear Admiral Montgomery Sicard.

USS <i>San Francisco</i> (C-5)

The first USS San Francisco (C-5) was a steel protected cruiser in the United States Navy. She was later named Tahoe and then Yosemite, becoming the third US Navy ship to bear the name Yosemite. She generally resembled her predecessor Newark, with a main armament of twelve 6-inch guns.

Russian cruiser <i>Rossia</i> Russian armored cruiser

Rossia was an armored cruiser of the Imperial Russian Navy built in the 1890s. She was designed as a long-range commerce raider and served as such during the Russo-Japanese War of 1904–05. She was based in Vladivostok when the war broke out and made a number of sorties in search of Japanese shipping in the early months of the war without much success.

Russian cruiser <i>Bayan</i> (1900) Imperial Russian Navys Bayan-class armoured cruiser

The Bayan was the name ship of the four Bayan-class armoured cruisers built for the Imperial Russian Navy in the first decade of the 20th century. The ship had to be built in France because there was no available capacity in Russia. Bayan was assigned to the First Pacific Squadron after completion and based at Port Arthur from the end of 1903. She suffered minor damage during the Battle of Port Arthur at the beginning of the Russo-Japanese War of 1904–05 and supported destroyers as they patrolled outside the harbour. After bombarding Japanese positions in July 1904, the ship struck a mine and was out of action for the next several months. Bayan was sunk during the Siege of Port Arthur and was then salvaged by the Japanese after the war.

USS <i>Canonicus</i> (ID-1696)

The second USS Canonicus was the Southern Pacific freighter El Cid temporarily converted for planting the World War I North Sea Mine Barrage. Newport News Shipbuilding and Dry Dock Company launched El Cid at Newport News, Virginia on 7 October 1899 for service between New York City and Gulf of Mexico seaports of New Orleans and Galveston, Texas. The United States Shipping Board took control of the ship from Southern Pacific Steamship Company in 1917.

<i>Yorktown</i>-class gunboat Class of American gunboats

The Yorktown class was a class of three steel-hulled, twin-screw gunboats built for the United States Navy beginning in 1887. All three ships of the class were named after cities near American Revolutionary War battles.

The Battle of Olongapo was fought September 18–23, 1899, during the Philippine–American War. The battle featured both land and sea fighting, of which the objective was the destruction of the single Filipino artillery gun in Olongapo, a menace to American ships crossing the nearby sea.

References

  1. 1 2 3 4 5 6 7 8 Gardiner and Chesneau, p. 151
  2. 1 2 3 4 5 6 7 Bauer and Roberts, p. 143
  3. 1 2 3 4 5 Friedman, pp. 25, 459
  4. ↑ "Table 21 - Ships on Navy List June 30, 1919". Congressional Serial Set. Washington, D.C.: U.S. Government Printing Office: 762. 1921.
  5. 1 2 DiGiulian, Tony, US 6"/30, 6"/35, and 6"/40 guns at Navweaps.com
  6. 1 2 3 4 5 6 7 8 "Baltimore IV (Cruiser No. 3)". Dictionary of American Naval Fighting Ships . Navy Department, Naval History and Heritage Command. 22 June 2015. Retrieved 23 January 2016.
  7. 1 2 3 Linn, pp. 37-41
  8. ↑ Belknap, p. 110

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.