Chester-class cruiser

Last updated
USSChesterCL1.jpg
USS Chester
Class overview
NameChester class
Builders
OperatorsFlag of the United States.svg  United States Navy
Preceded by St. Louis class
Succeeded by Omaha class
Built1905–1908
In commission1908–1923
Planned3
Completed3
Scrapped3
Preserved0
General characteristics (as built) [1]
Type Scout cruiser
Displacement
  • 3,750 long tons (3,810  t) normal
  • 4,687 long tons (4,762 t) normal
Length423.1 ft (129.0 m)
Beam47.1 ft (14.4 m)
Draft16.8 ft (5.1 m)
Installed power
  • 12 × boilers
  • Engines and horsepower varied by ship
Propulsion
  • 4 × screws (Chester)
  • 2 × screws
Speed24  kn (44.4 km/h; 27.6 mph)
Boats & landing
craft carried
2 × lifeboats
Complement359
Armament
Armor
  • Belt: 2 in (51 mm)
  • Deck: 1 in (25 mm) over steering gear

The three Chester-class cruisers were the first United States Navy vessels to be designed and designated as fast "scout cruisers" for fleet reconnaissance. They had high speed but little armor or armament. [2] They were authorized in January 1904, ordered in fiscal year 1905, and completed in 1908. In 1920 all scout cruisers were redesignated as "light cruisers" (CL). [3]

Contents

Birmingham was the first ship in the world to launch an airplane, in 1910 with pilot Eugene Ely, who also performed the first landing on a ship the following year, on USS Pennsylvania. [4] The class patrolled the Caribbean prior to World War I, sometimes supporting military interventions, with Chester playing a key role at the start of the United States occupation of Veracruz in 1914. The ships escorted convoys in World War I. The class was decommissioned 1921-1923 and sold for scrap to comply with the limits of the London Naval Treaty in 1930. [3]

Design and construction

Ship type

The three Chesters were the US Navy's only ships to be commissioned with the "scout cruiser" (hull classification symbol non-standard at the time, CS or SCR are sometimes used) designation, and were characterized by high speed and little armor or armament. They were also the last cruisers of any type built for the US Navy until the first Omaha-class cruisers were laid down in 1917 (the Navy concentrated on building dreadnought battleships and destroyers in the interim). The first three Omaha-class ships were also designated "scout cruisers" (CS or SCR) when ordered, but before any were launched the Navy revised its classification system and they and the Chesters became "light cruisers" (CL). [2] [3]

Armament

The as-built armament included two 5 in (127 mm)/50 caliber Mark 6 guns, [5] six 3 in (76 mm)/50 caliber rapid fire (RF) guns, [6] and two 21 inch (533 mm) torpedo tubes. [1] The original design featured a uniform gun armament of twelve 3-inch guns, which was supported by the Navy's General Board as simplifying fire control and echoing the uniform main and secondary armaments of dreadnought battleships. However, two 5-inch guns were substituted for six of the 3-inch guns, apparently to enable the scout cruisers to fight foreign light cruisers. [2] Notably, for the first time in US cruiser design smaller caliber weapons (6-pounder and smaller) were not fitted.

Armor

The armor of these ships was very light. A 2 in (51 mm) belt extended 9.5 ft (2.9 m) above the waterline in the engine and generator room area, 6.5 ft (2.0 m) above the waterline in the boiler room area, and 3.25 ft (1 m) below the waterline for its entire length. [2] There was no protective deck, only a 1 in (25 mm) deck above the steering gear. [2]

Engineering

The three ships had different propulsion plants so they could be compared: Chester was the first major combatant in the USN to receive steam turbine propulsion of the Parsons type, Salem received Curtis turbines, and Birmingham traditional triple-expansion engines. The design speed was 24  kn (27.6 mph; 44.4 km/h) for the triple-expansion ship and up to 25 kn (28.8 mph; 46.3 km/h) for the turbine ships. [2]

Chester had twelve coal-fired Normand boilers and Parsons direct-drive steam turbines totaling 23,000  shp (17,000 kW) on four shafts. [1] She made 26.52  kn (30.5 mph; 49.1 km/h) on trials at an estimated 16,000 shp (12,000 kW). [2]

Birmingham had twelve coal-fired Fore River boilers supplying 275  psi (1,900  kPa ) steam to two four-cylinder vertical triple-expansion engines totaling 16,000  ihp (12,000  kW ) (design) on two shafts. [2] [7] She made 24.33  kn (28.0 mph; 45.1 km/h) on trials at 15,670  ihp (11,690  kW ). [2]

Salem had twelve coal-fired Fore River boilers and Curtis direct-drive steam turbines totaling 23,900  shp (17,800  kW ) (design) on two shafts. [2] [7] She made 25.95  kn (29.9 mph; 48.1 km/h) on trials at 22,242  shp (16,586  kW ). [2]

Normal coal capacity was 475 tons, which could be increased to 1,400 tons. [1]

Refits

All three ships were refitted in 1917 to prepare for service in World War I. Salem had her main engines replaced with a 20,000  shp (15,000  kW ) General Electric geared steam turbine installation due to high coal consumption. All three received an armament upgrade, with four new 5-inch (127 mm)/51 caliber guns replacing the 5-inch/50 caliber guns as well as two of the 3-inch/50 caliber , [8] two 3-inch/50 caliber single-purpose guns (four being removed), and two 3-inch/50 caliber anti-aircraft guns added. [9] The submerged torpedo tubes were retained. [1] [10]

Ships in class

The three ships of the Chester class were: [1] [3]

ShipShipyardLaid downLaunchedCommissionedDecommissionedFate
USS Chester (CS-1) Bath Iron Works, Bath, Maine 25 September 190526 June 190725 April 190810 June 1921Renamed York 10 July 1928, sold for scrap 13 May 1930
USS Birmingham (CS-2) Fore River Shipyard, Quincy, Massachusetts 14 August 190529 May 190711 April 19081 December 1923Sold for scrap 13 May 1930
USS Salem (CS-3) Fore River Shipyard, Quincy, Massachusetts 28 August 190527 July 19071 August 190816 August 1921Sold for scrap 11 February 1930

On 17 July 1920 these ships were reclassified with the new hull numbers CL-1 through CL-3 (light cruisers). On 10 July 1928 Chester was renamed York to free the name for USS Chester (CA-27). [3]

See also

Related Research Articles

USS <i>Boston</i> (1884) Early U.S. Navy "ABCD" ship

The fifth USS Boston was a protected cruiser and one of the first steel warships of the "New Navy" of the 1880s. In some references she is combined with Atlanta as the Atlanta class, in others as the Boston class.

USS <i>Chicago</i> (1885) Protected cruiser of the US Navy

The first USS Chicago was a protected cruiser of the United States Navy, the largest of the original three authorized by Congress for the "New Navy" and one of the U.S. Navy's first four steel ships.

<i>Florida</i>-class battleship Dreadnought battleship class of the United States Navy

The Florida-class battleships of the United States Navy comprised two ships: Florida and Utah. Launched in 1910 and 1909 respectively and commissioned in 1911, they were slightly larger than the preceding Delaware class design but were otherwise very similar. This was the first US battleship class in which all ships received steam turbine engines. In the previous Delaware-class, North Dakota received steam turbine propulsion as an experiment while Delaware retained triple-expansion engines.

<i>Benham</i>-class destroyer Destroyer class of the US Navy

The Benham class of ten destroyers was built for the United States Navy (USN). They were part of a series of USN destroyers limited to 1,500 tons standard displacement by the London Naval Treaty and built in the 1930s. The class was laid down in 1936-1937 and all were commissioned in 1939. Much of their design was based on the immediately preceding Gridley and Bagley-class destroyers. Like these classes, the Benhams were notable for including sixteen 21-inch (533 mm) torpedo tubes, the heaviest torpedo armament ever on US destroyers. They introduced a new high-pressure boiler that saved space and weight, as only three of the new boilers were required compared to four of the older designs. The class served extensively in World War II in the Atlantic, Mediterranean, and Pacific theaters, including Neutrality Patrols in the Atlantic 1940-1941. Sterett received the United States Presidential Unit Citation for the Battle of Guadalcanal and the Battle of Vella Gulf, and the Philippine Republic Presidential Unit Citation for her World War II service. Two of the class were lost during World War II, three were scrapped in 1947, while the remaining five ships were scuttled after being contaminated from the Operation Crossroads atomic bomb tests at Bikini Atoll in the Pacific.

<i>Pennsylvania</i>-class cruiser Class of American naval ships

The Pennsylvania class of six armored cruisers served in the United States Navy from 1905 to 1927. All six were renamed for cities 1912–1920, to make the state names available for the new battleships beginning with the Pennsylvania-class battleships. All of these served during World War I, with California being the only ship of the class to be lost. The remaining five armored cruisers were scrapped between 1930 and 1931 in accordance with the London Naval Treaty.

<i>Delaware</i>-class battleship Dreadnought battleship class of the United States Navy

The Delaware-class battleships of the United States Navy were the second class of American dreadnoughts; the class comprised two ships: Delaware and North Dakota. With this class, the 16,000 long tons (16,257 t) limit imposed on capital ships by the United States Congress was waived, which allowed designers at the Navy's Bureau of Construction and Repair to correct what they considered flaws in the preceding South Carolina class and produce ships not only more powerful but also more effective and rounded overall. Launched in 1909, these ships became the first in US naval history to exceed 20,000 long tons (20,321 t).

USS <i>Atlanta</i> (1884)

USS Atlanta was a protected cruiser and one of the first steel warships of the "New Navy" of the 1880s. In some references she is combined with Boston as the Atlanta class, in others as the Boston class.

<i>Bainbridge</i>-class destroyer Destroyer class of the US Navy

The Bainbridge-class destroyers were a class of United States Navy Torpedo Boat Destroyers (TBDs) built between 1899 and 1903. The first class so designated, they comprised the first 13 of 16 TBDs authorized by Congress in 1898 following the Spanish–American War. One ship of the class was lost at sea during service in World War I: Chauncey, which collided with the British merchant ship SS Rose in 1917. The balance were decommissioned in 1919 and sold postwar in 1920, eleven to Joseph G. Hitner of Philadelphia, and the Hopkins to the Denton Shore Lumber Company in Tampa, Florida.

<i>Smith</i>-class destroyer Destroyer class of the US Navy

The Smith-class destroyers were the first ocean-going torpedo-boat destroyers in the United States Navy, and the first to be driven by steam turbines instead of the reciprocating engines fitted in the sixteen earlier and much smaller torpedo-boat destroyers ordered under the Act of 4 May 1898. Flusser and Reid are sometimes considered to be Flusser-class ships. Also, since Flusser was completed first, some period documentation refers to the entire class as Flussers.

<i>Paulding</i>-class destroyer Destroyer class of the US Navy

The Paulding-class destroyers were a series of United States Navy destroyers derived from the Smith class with the torpedo tubes increased from three to six via twin mounts. They were the first destroyers in the US Navy with oil-fired boilers. The 21 Pauldings doubled the number of destroyers in the US Navy. The Paulding class derived its name from the class's lead ship, Paulding, named for Rear Admiral Hiram Paulding (1797–1878). Like the Smiths, they were nicknamed "flivvers" after the small and shaky Model T Ford once the larger "thousand tonner" destroyers entered service.

<i>Cassin</i>-class destroyer Destroyer class of the US Navy

Four destroyers in the United States Navy comprised the Cassin class. All served as convoy escorts during World War I. The Cassins were the first of five "second-generation" 1000-ton four-stack destroyer classes that were front-line ships of the Navy until the 1930s. They were known as "thousand tonners" for their normal displacement, while the previous classes were nicknamed "flivvers" for their small size, after the Model T Ford.

<i>Aylwin</i>-class destroyer Destroyer class of the US Navy

The Aylwin class was a class of four destroyers in the United States Navy; all served as convoy escorts during World War I. The Aylwins were the second of five "second-generation" 1000-ton four-stack destroyer classes that were front-line ships of the Navy until the 1920s. They were known as "thousand tonners". All were scrapped in 1935 to comply with the London Naval Treaty.

<i>New Orleans</i>-class cruiser (1896) United States Navy protected cruiser class

The New Orleans class of protected cruisers of the United States Navy consisted of two ships which were building for the Brazilian Navy at Elswick, near Newcastle Upon Tyne, England, by Armstrong Whitworth. The Brazilian Navy had ordered four Elswick cruisers, but had already sold the first ship during construction to Chile as Ministro Zenteno. One ship was delivered to Brazil, named Almirante Barroso. The third ship was fitting out as Amazonas, and the fourth was on order as Almirante Abreu.

<i>Somers</i>-class destroyer Destroyer class of the US Navy

The Somers-class destroyer was a class of five 1850-ton United States Navy destroyers based on the Porter class. They were answers to the large destroyers that the Japanese navy was building at the time, and were initially intended to be flotilla leaders. They were laid down from 1935–1936 and commissioned from 1937–1939. They were built to round-out the thirteen destroyers of 1,850 tons standard displacement allowed by the tonnage limits of the London Naval Treaty, and were originally intended to be repeat Porters. However, new high-pressure, high-temperature boilers became available, allowing the use of a single stack. This combined with weight savings allowed an increase from two quadruple center-line torpedo tube mounts to three. However, the Somers class were still over-weight and top-heavy. This was the first US destroyer class to use 600 psi (4,100 kPa) steam superheated to 850 °F (454 °C), which became standard for US warships built in the late 1930s and World War II.

<i>Derfflinger</i>-class battlecruiser Battlecruiser class of the German Imperial Navy

The Derfflinger class was a class of three battlecruisers of the Imperial German Navy. The ships were ordered for the 1912–13 Naval Building Program of the German Imperial Navy as a reply to the Royal Navy's two new Lion-class battlecruisers that had been launched a few years earlier. The preceding Moltke class and the incrementally improved Seydlitz represented the end of the evolution of Germany's first generation of battlecruisers. The Derfflinger class had considerable improvements, including a larger primary armament, all of which was mounted on the centerline. The ships were also larger than the preceding classes. The Derfflinger class used a similar propulsion system, and as a result of the increased displacement were slightly slower.

<i>St. Louis</i>-class cruiser Class of American naval ships

The St. Louis-class cruisers were a class of three cruisers that served in the United States Navy at the beginning of the 20th century. Authorized in fiscal year 1901 by an Act of Congress of 7 June 1900 as part of the naval buildup touched off by the Spanish–American War, the St. Louis-class cruiser initially began as an improved Olympia. However, during the design phase, decisions were made that increased the size of the vessel from 6,000 long tons (6,100 t) to 9,700 long tons (9,900 t), including adding protection that resulted in the designation "semi-armored cruiser". This led to a larger power plant, and other decisions were made to try to increase speed and range, such as using smaller 6-inch (152 mm) guns instead of 8-inch (203 mm) guns, and adding coal capacity. The completed ship at 9,700 long tons was the same displacement as a full armored cruiser without the same armor. One reference describes the class as "among the earliest well-documented examples of creeping growth in warship design".

<i>Columbia</i>-class cruiser Class of American naval ships

The Columbia-class cruisers were two protected cruisers constructed in 1890 and 1891 and used by the United States Navy. They were lightly gunned ships with only moderate armor that were built for the speed needed to overtake and destroy the fast ocean liners of the day as commerce raiders. However, the light armament and armor left these ships over-specialized and outclassed by ordinary similar sized protected cruisers that they might encounter. Also, the engines were expensive to operate and at full power the ships' range was greatly decreased. Due to the ongoing size and speed race in ocean liners, by 1907 they were outclassed in speed by the ill-fated Lusitania and the German liner Kronprinzessin Cecilie.

<i>Denver</i>-class cruiser Early 20th-century class of American naval ships

The Denver-class cruisers were a group of six protected cruisers in service with the United States Navy from 1903 through 1929. Authorized by Congress in 1899 as part of the naval buildup touched off by the Spanish–American War, they were designed with peacetime duties on foreign stations and tropical service in mind, specifically patrolling Latin America and the Caribbean. However, they had insufficient armament, armor, and speed for combat with most other cruisers. Thus, they were also called "peace cruisers" and were effectively gunboats. They were intended to augment the Montgomery class in these roles.

<i>Cincinnati</i>-class cruiser Class of American naval ships

The Cincinnati-class cruisers were two small protected cruisers built for the United States Navy in the early 1890s. They were smaller and more lightly armed and protected than most previous US cruisers, and were intended for commerce raiding. They may also be referred to as Raleigh-class cruisers, as Raleigh was launched and commissioned prior to Cincinnati.

<i>Montgomery</i>-class cruiser Class of American naval ships

The Montgomery-class cruisers were three unprotected cruisers built for the United States Navy in the early 1890s. They had a thin water-tight protective deck, and also relied for protection upon their coal bunkers, cellulose packing, and numerous compartments. Roomy accommodations were provided for officers and crew, these cruisers being mainly intended for long cruises on distant stations.

References

  1. 1 2 3 4 5 6 Gardiner and Chesneau, p. 155
  2. 1 2 3 4 5 6 7 8 9 10 11 Friedman, pp. 67-71, 468-469
  3. 1 2 3 4 5 Bauer and Roberts, p. 155
  4. "Birmingham I (Scout Cruiser No. 2)". Dictionary of American Naval Fighting Ships . Navy Department, Naval History and Heritage Command. 25 June 2015. Retrieved 21 February 2016.
  5. DiGiulian, Tony, 5"/50 Mark 5 and Mark 6 USN guns at NavWeaps.com
  6. DiGiulian, Tony, early 3"/50 USN guns at NavWeaps.com
  7. 1 2 "Ships' Data, U.S. Naval Vessels, 1911". US Navy Department. 1912. pp. 84–91. Retrieved 8 February 2016.
  8. DiGiulian, Tony, 5"/51 USN guns at NavWeaps.com
  9. DiGiulian, Tony, later 3"/50 USN guns at NavWeaps.com
  10. "Ships' Data, U.S. Naval Vessels". US Navy Department. 1 July 1921. pp. 60–67. Retrieved 10 February 2016.

Bibliography