USS Montgomery (C-9) | |
Class overview | |
---|---|
Name | Montgomery class |
Builders |
|
Operators | United States Navy |
Preceded by | Cincinnati class |
Succeeded by | Columbia class |
Cost | $612,500–$675,000 each |
Built | 1890–1894 |
In commission | 1893–1919 |
Planned | 3 |
Completed | 3 |
Scrapped | 3 |
General characteristics | |
Type | Unprotected cruiser |
Displacement | 2,000 tons |
Length | 257 ft (78 m) |
Beam | 37 ft (11 m) |
Draft | 14 ft 6 in (4.42 m) |
Installed power |
|
Propulsion | 2 × screws |
Speed | 18 knots (33 km/h) |
Range | 3,280 nmi (6,070 km; 3,770 mi) at 10 kn (19 km/h; 12 mph) |
Complement | 20 officers, 228 enlisted men |
Armament |
|
Armor |
|
The Montgomery-class cruisers were three unprotected cruisers built for the United States Navy in the early 1890s. [1] They had a thin water-tight protective deck, and also relied for protection upon their coal bunkers, cellulose packing, and numerous compartments. Roomy accommodations were provided for officers and crew, these cruisers being mainly intended for long cruises on distant stations. [2]
Known initially as cruisers Nos. 9, 10, and 11, the Montgomery-class cruisers were authorized by an Act of Congress approved September 7, 1888. [2] [3] [4]
As the U.S. Navy began to rebuild its fleet with steel-hulled vessels to keep pace with the advance of naval technology in the 1880s, it explored a wide range of conceptual designs. One of these was the "peace cruiser," a barely-armored vessel that amounted to a large gunboat, and in the 1888 naval appropriations bill, Congress set aside money to build three such vessels. [1] [3]
In May 1889, the Department of the Navy invited proposals for the construction of three cruisers of about 2,000 tons displacement each, at a cost of not more than $700,000 each. When the bids were opened on August 22 of that year, Bath Iron Works and William Cramp & Sons submitted bids that were over the limit fixed by Congress in the act of September 1888, and it was decided to re-advertise for proposals. The revised terms reduced the required speed from 18 knots to 17 knots and set a premium for increased speed at $23,000 for each quarter-knot in excess of the required speed of 17 knots; a penalty of $25,000 was set for every quarter-knot short of the required speed and in case of failure to develop and maintain a speed of 16 knots for four hours straight, the vessels could be rejected. The time fixed for completion was also extended from two years to two years and six mouths. [2]
Bath resubmitted a bid, Cramp and Sons dropped out, and other bids were received from the Union Iron Works of San Francisco, N.F. Palmer, Jr. & Company of New York (representative of Delaware River Shipbuilding and of Quintard Iron Works, who made Marblehead's machinery), [5] Columbian Iron Works of Baltimore and Harrison Loring, owner of City Point Iron Works of Boston. [2] [6]
On October 28, 1889 the Department awarded contracts to the Columbian Iron Works and Dry Dock Company for the construction of two of these cruisers (Montgomery and Detroit) for the sum of $612,500 each, and on November 1 it awarded City Point Iron Works the contract for the construction of the other cruiser (Marblehead) for the sum of $674,000. The ships built by Columbian were laid down in February 1890 and Marblehead was laid down in October 1890; Detroit was launched first, in October 1891; Montgomery was launched in December of that year and Marblehead the next August. [2] [6]
These ships were designed with a main gun armament of two 6 in (152 mm)/35 caliber Mark 3 rapid fire (RF) guns [7] (one each fore and aft) and eight 4 in (102 mm)/40 caliber RF guns [8] along the sides. However, 5 in (127 mm)/40 caliber Mark 2 RF guns [9] were substituted for the 4-inch guns prior to construction. The class had poor stability as built due to the armored deck, [10] and only one ship (either Detroit or Montgomery) was actually completed with the 6-inch guns. [5] [11] References vary as to how the lack of 6-inch guns was compensated for. The Register of Ships of the US Navy states that Detroit was completed in 1893 with 6-inch guns, which were removed by 1894, and the other ships were completed with only eight 5-inch guns. [5] In 1895-96 Montgomery and Marblehead had a 5-inch gun added on the forward deck, and by 1897 all three ships had 10 5-inch guns, probably due to an additional gun on the aft deck. [5]
Secondary armament was six 6-pounder (57 mm (2.2 in)) RF guns, [12] two 1-pounder (37 mm (1.5 in)) RF guns, [13] along with one Gatling gun and three 18 inch (450 mm) torpedo tubes. [4] [11] Along with Olympia and the Cincinnati class, these were among the first US Navy ships to carry 5-inch guns.
The protective deck, arranged similarly to that of a protected cruiser, was 7⁄16 in (11 mm) on the sloped sides and 5⁄16 in (7.9 mm) in the flat middle; even this meager protection proved detrimental to stability. [2] The conning tower was 2 in (51 mm) thick. [11] Coal bunkers and a cofferdam of "Woodite" (cellulose) were also part of the protection; this was called "coal-protected". [10] The "peace cruiser" concept implied that these ships were primarily for peacetime "show the flag" missions and not for combat against other cruisers, although they did engage in shore bombardment in the Spanish–American War. [14] Most of these cruisers were redesignated as gunboats (hull classification symbol PG) in 1920. [15]
The as-built engineering plant included six coal-fired cylindrical boilers, which produced steam for two vertical triple expansion engines totaling 5,400 ihp (4,000 kW ) for a contract speed of 17 knots (31 km/h; 20 mph). [4] [11] Speeds on trials ranged from 18.44 knots (34.15 km/h; 21.22 mph) to 19.05 knots (35.28 km/h; 21.92 mph); [5] the builders received their contract bonuses. [11] The ships normally carried 200 tons of coal for a designed range of 3,280 nmi (6,070 km ; 3,770 mi ) at 10 kn (19 km/h; 12 mph); this could be increased to 340 tons for a range of 8,952 nmi (16,579 km ; 10,302 mi ) at 10 kn (19 km/h; 12 mph). [4] [10] [11]
Montgomery was converted to a torpedo test ship in 1904–1908 and carried various types of torpedo tubes until 1914, [11] when she was further refitted as a training ship for the Maryland Naval Militia with four 4-inch (102 mm)/40 caliber guns and four torpedo tubes, two each 18 inch (450 mm) and 21-inch. [5] She was reboilered with six Almy boilers in 1918, [4] when she was reactivated for coastal patrol duty as USS Anniston. [16] The torpedo tubes were removed from Detroit and Marblehead in 1901–02. [5] Marblehead was refitted as a training ship for the Oregon Naval Militia in 1915 with eight 4-inch/40 caliber guns. [5]
Detroit was commissioned in July 1893, Marblehead in April 1894 and Montgomery in June 1894. In the years leading up to the Spanish–American War they spent the bulk of their service in Atlantic, Caribbean and European waters; Detroit protected American citizens and interests during unrest in Brazil, and later served two years on the Asiatic Station. [17]
During the Spanish–American War, Montgomery blockaded and bombarded Cuba, capturing two Spanish merchant vessels. [16] Detroit bombarded San Juan, Puerto Rico. [14] Marblehead bombarded Cuba and participated in the capture of Guantánamo Bay. [18]
After the war all three ships operated in Latin American waters, Marblehead on the Pacific side, showing the flag in peaceful ports and protecting American citizens and interests in the event of unrest. All were decommissioned in 1900 and recommissioned in 1902. [16] [17] [18] Detroit operated in the Caribbean, intervening diplomatically to resolve an insurgency in the Dominican Republic in 1904. [17] Montgomery operated in the Caribbean until she was converted to a torpedo test ship 1904–1908. [16] Marblehead operated in the Pacific until decommissioned in 1906. [18]
Detroit was decommissioned in August 1905 and sold for scrap in December 1910, but the other two continued in service through the First World War as Naval Militia training ships and on coastal patrols during the war. Montgomery was converted to a training ship in 1914; on 14 March 1918 she was renamed USS Anniston to free her name for USS Montgomery (DD-121), then struck in August 1919 and sold in November of that year; Marblehead was decommissioned in August 1919, reclassified as a gunboat (PG-27) in July 1920 and sold in August 1921. [2]
The three ships of the Montgomery class were: [5]
Ship | Shipyard | Laid down | Launched | Commissioned | Decommissioned | Fate |
---|---|---|---|---|---|---|
USS Montgomery (C-9) | Columbian Iron Works and Dry Dock, Baltimore, Maryland | February 1890 | 5 December 1891 | 21 June 1894 | 16 May 1918 | Renamed Anniston 14 March 1918, sold for scrap 14 November 1919 |
USS Detroit (C-10) | Columbian Iron Works and Dry Dock | February 1890 | 28 October 1891 | 20 July 1893 | 1 August 1905 | Sold for scrap 22 December 1910 |
USS Marblehead (C-11) | City Point Iron Works, Boston, Massachusetts | October 1890 | 11 August 1892 | 2 April 1894 | 21 August 1919 | Sold for scrap 5 August 1921 |
USS Texas was a pre-dreadnought battleship built by the United States in the early 1890s. The first American battleship commissioned, she was built in reaction to the acquisition of modern armored warships by several South American countries, and meant to incorporate the latest developments in naval tactics and design. This includes the mounting of her main armament en echelon to allow maximum end-on fire and a heavily-armored citadel amidships to ensure defensive strength. However, due to the state of U.S. industry at the time, Texas's building time was lengthy, and by the time she was commissioned, she was already out of date. Nevertheless, she and the armored cruiser USS Maine were considered advancements in American naval design.
USS Brooklyn (ACR-3/CA-3) was the third United States Navy armored cruiser, the only one to be named at commissioning for a city rather than a state.
USS New York (ACR-2/CA-2) was the second United States Navy armored cruiser so designated; the first was the ill-fated Maine, which was soon redesignated a second-class battleship. Due to the unusually protracted construction of Maine, New York was actually the first armored cruiser to enter U.S. Navy service. The fourth Navy ship to be named in honor of the state of New York, she was later renamed Saratoga and then Rochester. With six 8-inch guns, she was the most heavily armed cruiser in the US Navy when commissioned.
The first USS Chicago was a protected cruiser of the United States Navy, the largest of the original three authorized by Congress for the "New Navy" and one of the U.S. Navy's first four steel ships.
The Colorado-class battleships were a group of four United States Navy super-dreadnoughts, the last of its pre-Treaty battleships. Designed during World War I, their construction overlapped the end of that conflict and continued in its immediate aftermath. Though all four keels were laid, only three ships entered service: Colorado, Maryland, and West Virginia. Washington was over 75% completed when she was canceled under the terms of the Washington Naval Treaty in 1922. As such, the 16" gun Colorado-class ships were the last and most powerful battleships built by the U.S. Navy until the North Carolina class entered service on the eve of World War II.
The Clemson class was a series of 156 destroyers which served with the United States Navy from after World War I through World War II.
USS Marblehead (CL-12) was an Omaha-class light cruiser, originally classified as a scout cruiser, of the United States Navy. She was the third Navy ship named for the town of Marblehead, Massachusetts.
The Pennsylvania class of six armored cruisers served in the United States Navy from 1905 to 1927. All six were renamed for cities 1912–1920, to make the state names available for the new battleships beginning with the Pennsylvania-class battleships. All of these served during World War I, with California being the only ship of the class to be lost. The remaining five armored cruisers were scrapped between 1930 and 1931 in accordance with the London Naval Treaty.
The New Orleans class of protected cruisers of the United States Navy consisted of two ships which were building for the Brazilian Navy at Elswick, near Newcastle Upon Tyne, England, by Armstrong Whitworth. The Brazilian Navy had ordered four Elswick cruisers, but had already sold the first ship during construction to Chile as Ministro Zenteno. One ship was delivered to Brazil, named Almirante Barroso. The third ship was fitting out as Amazonas, and the fourth was on order as Almirante Abreu.
Tone was a protected cruiser of the Imperial Japanese Navy. The ship was named after the Tone River in Tokyo.
The three Chester-class cruisers were the first United States Navy vessels to be designed and designated as fast "scout cruisers" for fleet reconnaissance. They had high speed but little armor or armament. They were authorized in January 1904, ordered in fiscal year 1905, and completed in 1908. In 1920 all scout cruisers were redesignated as "light cruisers" (CL).
The Derfflinger class was a class of three battlecruisers of the Imperial German Navy. The ships were ordered for the 1912–13 Naval Building Program of the German Imperial Navy as a reply to the Royal Navy's two new Lion-class battlecruisers that had been launched a few years earlier. The preceding Moltke class and the incrementally improved Seydlitz represented the end of the evolution of Germany's first generation of battlecruisers. The Derfflinger class had considerable improvements, including a larger primary armament, all of which was mounted on the centerline. The ships were also larger than the preceding classes. The Derfflinger class used a similar propulsion system, and as a result of the increased displacement were slightly slower.
The 6-inch/47-caliber Mark 16 gun was used in the main batteries of several pre-war and World War II US Navy light cruisers. They were primarily mounted in triple turrets and used against surface targets. The Mark 16DP gun was a dual-purpose fitting of the Mark 16 for use against aircraft as well as surface ships. It was installed in the postwar Worcester-class light cruisers and the anti-aircraft gunnery training ship Mississippi.
The St. Louis-class cruisers were a class of three cruisers that served in the United States Navy at the beginning of the 20th century. Authorized in fiscal year 1901 by an Act of Congress of 7 June 1900 as part of the naval buildup touched off by the Spanish–American War, the St. Louis-class cruiser initially began as an improved Olympia. However, during the design phase, decisions were made that increased the size of the vessel from 6,000 long tons (6,100 t) to 9,700 long tons (9,900 t), including adding protection that resulted in the designation "semi-armored cruiser". This led to a larger power plant, and other decisions were made to try to increase speed and range, such as using smaller 6-inch (152 mm) guns instead of 8-inch (203 mm) guns, and adding coal capacity. The completed ship at 9,700 long tons was the same displacement as a full armored cruiser without the same armor. One reference describes the class as "among the earliest well-documented examples of creeping growth in warship design".
The Columbia-class cruisers were two protected cruisers constructed in 1890 and 1891 and used by the United States Navy. They were lightly gunned ships with only moderate armor that were built for the speed needed to overtake and destroy the fast ocean liners of the day as commerce raiders. However, the light armament and armor left these ships over-specialized and outclassed by ordinary similar sized protected cruisers that they might encounter. Also, the engines were expensive to operate and at full power the ships' range was greatly decreased. Due to the ongoing size and speed race in ocean liners, by 1907 they were outclassed in speed by the ill-fated Lusitania and the German liner Kronprinzessin Cecilie.
The Denver-class cruisers were a group of six protected cruisers in service with the United States Navy from 1903 through 1929. Authorized by Congress in 1899 as part of the naval buildup touched off by the Spanish–American War, they were designed with peacetime duties on foreign stations and tropical service in mind, specifically patrolling Latin America and the Caribbean. However, they had insufficient armament, armor, and speed for combat with most other cruisers. Thus, they were also called "peace cruisers" and were effectively gunboats. They were intended to augment the Montgomery class in these roles.
The Lexington-class battlecruisers were officially the only class of battlecruiser to ever be ordered by the United States Navy. While these six vessels were requested in 1911 as a reaction to the building by Japan of the Kongō class, the potential use for them in the U.S. Navy came from a series of studies by the Naval War College which stretched over several years and predated the existence of the first battlecruiser, HMS Invincible. The fact they were not approved by Congress at the time of their initial request was due to political, not military considerations.
The Cincinnati-class cruisers were two small protected cruisers built for the United States Navy in the early 1890s. They were smaller and more lightly armed and protected than most previous US cruisers, and were intended for commerce raiding. They may also be referred to as Raleigh-class cruisers, as Raleigh was launched and commissioned prior to Cincinnati.
The Neptune class was a proposed class of cruisers planned for the British Royal Navy in the latter years of the Second World War. They were large ships which were to be armed with twelve 6-inch (152 mm) dual-purpose guns and with a heavy secondary armament. Although five ships of the class were planned in 1944, they were cancelled following the end of the war and before construction could begin.