| AMC Cavalier | |
|---|---|
 | |
| Overview | |
| Manufacturer | American Motors (AMC) |
| Production | 1965 (Concept car) |
| Designer | Dick Teague |
| Body and chassis | |
| Class | Compact car |
| Body style | 4-door sedan |
| Layout | FR layout |
| Powertrain | |
| Engine | 343 cu in (5.6 L) V8 |
| Dimensions | |
| Wheelbase | 108 in (2,743 mm) |
| Length | 175 in (4,445 mm) |
| Width | 65.5 in (1,664 mm) |
The AMC Cavalier was a compact concept presented by American Motors (AMC) in 1965, noted for symmetrical elements of its design and its interchangeable body parts.
The AMC Cavalier was one of four prototypes that hinted at AMC's future production vehicles. In 1966, the Cavalier became part of "Project IV" touring the auto show circuit. [1] This group of four show cars included the Vixen (a 4-seat coupe with "flying buttress" rear roof pillars), the AMX prototype (a 2-seat coupe that evolved into the real production car), and the AMX II (a notchback hardtop that was 8 inches (203 mm) longer than the AMX). At the time, none of the concept cars carried the Rambler nameplate, which AMC started phasing out in 1966 in favor of AMC.
Of the four, only the 4-door Cavalier sedan with four seats was designed by Dick Teague in AMC's advanced design studio. While the "Project IV" cars were shown to the public, the automaker prepared future production cars. Elements of the Cavalier's design were incorporated into the new 1970 model year AMC Hornet, which required tooling and final stampings by summer 1969. [2]
The Cavalier was a study in symmetry. [3] It was built to demonstrate the use of numerous interchangeable body panels. [4] For example, the fenders on opposite corners were identical. [5] Similarly, the doors were shared with opposite sides (an idea originated by Cord on its prototype 935 Saloon [6] ) since the rear doors were hinged in the back (suicide door). The hood and decklid were also interchangeable. The Nash Metropolitan, which was introduced in 1953 and sold by AMC until 1962, also had interchangeable inner panels, but their outer skins differed. [7] In addition to reducing tooling costs by thirty percent, the design objective of the AMC Cavalier was also to demonstrate ways to reduce the production costs. [7]
Another small independent automaker also sought to reduce manufacturing costs toward the end of its existence. Studebaker developed a concept car with a 113-inch (2,870 mm) wheelbase for potential launch in 1967–1969. The fiberglass construction of the "Familia" design study featured interchangeable hood and trunk, doors, bumpers, head-light, and taillight housings, windshield and back window, as well as side windows. [8] However, the Familia's concepts were not incorporated into Studebaker production cars.
The Cavalier also featured curved sides, as if a fuselage, punctuated by full wheel arches and riding on 13-inch (330 mm) "mag" wheels with whitewall tires. The rear roof pillars ("C" pillar) were a "flying buttress" design providing the profile view of the car with a sweptback roof style to what appears to be a short rear deck. [5] The rear window was recessed between the C pillars, making back area look similar to that of the General Motors' 1966–1967 "A" body platform two-door models, such as the Chevrolet Chevelle and Pontiac GTO. The swept-back panels and roof were covered in black vinyl to enhance the car's deep red metallic body finish. [9]
The Cavalier featured a minimal amount of ornamentation compared to contemporary production cars, but was comparable to popular foreign makes as AMC was interested in marketing the car overseas. [9] Utility was enhanced with dual-action scissor-type hinges on the deck lid so it could be opened like a normal trunk lid, or elevated to the height of the car's roof to accommodate tall, large, and bulky items in the trunk area. [9]
Safety was emphasized with wrap-around rear lights designed to illuminate alternate warning signals in green, yellow, and red. [9] A built-in roll bar reinforcement allowed for the thin pillar posts and roof panel. [10] Exterior door handles were replaced with flush, push-type door buttons. [9]
The dashboard of the Cavalier was a schematic layout of the car; the vehicle's profile and interior cavities were represented in the design of the dashboard. [11]
Under the innovative body panel structure, the concept vehicle had a conventional front-mounted 343 cu in (5.6 L)280 bhp (209 kW) AMC V8 engine with rear-wheel drive (FR layout). The compact-sized AMC Cavalier rode on a 108-inch (2,743 mm) wheelbase and offered seating capacity for six adults. [12]
According to Robert B. Evans, chairman of the automaker at the time, the Cavalier toured the auto show circuit to "help restore public confidence in AMC, where sales have sagged." [7]
"The styling of this car totally works when contrasted with the other similarly sized offerings" during the mid-1960s that included the Chevrolet Corvair and the Ford Falcon. [13]
Except for the short hood giving it equal-length front and rear decks, many of the Cavalier's styling touches found their way into the AMC Hornet that was introduced for the 1970 model year. [14] The Hornet was also designed under the direction of Richard A. Teague. "The Cavalier's strong horizontal lines, flat surfaces, minimal overhangs and blockish face were all visual hints to the 1970 AMC Hornet compact." [15] Although the production Hornets did not use interchangeable body parts, its front and rear bumpers were made from the same stamping. [16]
A coupe version of the Cavalier was also part of the "Project IV" concept tour, but was designed without parts swapping. This companion model, called the "Vixen" also forecast the 1970 Hornet appearance "in its simple blunt "face," dual headlamps, long-hood/short-deck profile, and flared wheel openings." [17]
Teague took the exact opposite of the Cavalier's symmetrical design for the 1973 "Hornet GT" concept car. [18] This car featured differently styled sides and pillars to test ways of improving both visibility and roof strength, as well as gaining more interior space. [18]
The Sharjah Post Office issued a 3 dirham (Dh) airmail stamp in January 1971 depicting a drawing of the AMC Cavalier (Michel catalog stamp number 783). It is part of a "Post Day" series of stamps illustrating a pair of early and modern automobiles. [19] The postage stamp shows a 1904 Rambler and the Cavalier is misidentified on the stamp as a 1970 car, probably because the concept vehicle looked so similar to the AMC Hornet that was introduced for the 1970 model year.
American Motors planned to use the "Cavalier" name for a new pony car model to debut in 1968. By that time, however, General Motors had secured the rights to the "Cavalier" name, which it would use fourteen years later on the Chevrolet Cavalier. The second choice was selected: Javelin. [20]
The AMC Gremlin is a subcompact automobile introduced in 1970, manufactured and marketed in a single, two-door body style (1970–1978) by American Motors Corporation (AMC), as well as in Mexico (1974–1983) by AMC's Vehículos Automotores Mexicanos (VAM) subsidiary.
A station wagon or estate car, is an automotive body-style variant of a sedan with its roof extended rearward over a shared passenger/cargo volume with access at the back via a third or fifth door, instead of a trunk/boot lid. The body style transforms a standard three-box design into a two-box design—to include an A, B, and C-pillar, as well as a D-pillar. Station wagons can flexibly reconfigure their interior volume via fold-down rear seats to prioritize either passenger or cargo volume.
American Motors Corporation was an American automobile manufacturing company formed by the merger of Nash-Kelvinator Corporation and Hudson Motor Car Company on May 1, 1954. At the time, it was the largest corporate merger in U.S. history.
Rambler is an automobile brand name that was first used by the Thomas B. Jeffery Company between 1900 and 1914.
The AMC Pacer is a two-door compact car produced in the United States by American Motors Corporation (AMC) from the 1975 through the 1980 model years. The Pacer was also made in Mexico by Vehículos Automotores Mexicanos (VAM) from 1976 until 1979 and positioned as a premium-priced luxury car.
The AMC Javelin is an American front-engine, rear-wheel-drive, two-door hardtop automobile manufactured by American Motors Corporation (AMC) across two generations, 1968 through 1970 and 1971 through 1974 model years. The car was positioned and marketed in the pony car market segment.
The AMC AMX is a two-seat GT-style muscle car produced by American Motors Corporation from 1968 through 1970. As one of just two American-built two-seaters, the AMX was in direct competition with the one-inch (2.5 cm) longer wheelbase Chevrolet Corvette, for substantially less money. It was based on the new-for-1968 Javelin, but with a shorter wheelbase and deletion of the rear seat. In addition, the AMX's rear quarter windows remained fixed, making it a coupe, while the Javelin was a true two-door hardtop.
The Ambassador is an automobile manufactured and marketed by American Motors Corporation (AMC) from 1957 through 1974 over eight generations, available in two- and four-door sedan, two-door hardtop, four-door station wagon as well as two-door convertible body styles. It was classified as a full-size car from 1957 through 1961, mid-size from 1962 until 1966, and again full-size from 1967 through 1974 model years.
The AMC Hornet is a compact automobile manufactured and marketed by American Motors Corporation (AMC) and made from 1970 through 1977—in two- and four-door sedan, station wagon, and hatchback coupe configurations. The Hornet replaced the compact Rambler American line, marking the end of the Rambler marque in the American and Canadian markets.
The AMC Spirit is a subcompact car sold by American Motors Corporation (AMC) from 1979 through 1983. Replacing the AMC Gremlin, the Spirit was available in two different body styles, both of which were two-door hatchbacks – but neither was marketed as such. Instead, AMC offered a restyled Gremlin either as a "Spirit Kammback" or "sedan", while an additional model with a more gently sloping rear was introduced as the Spirit liftback or "coupe". Due to budget constraints, the Spirit shared the Gremlin's platform – its floorpan, powertrains, and many other parts were carried over. AMC also offered a four-wheel drive cross-over version using the Spirit's bodywork, marketed from 1981 through 1983 model years as the AMC Eagle SX/4 and Eagle Kammback. Spirits were manufactured by AMC in both Wisconsin and Ontario, as well as under license by V.A.M. in Mexico where they retained the Gremlin name on the restyled models.
The AMC Concord is a compact car manufactured and marketed by the American Motors Corporation for model years 1978–1983. The Concord was essentially a revision of the AMC Hornet that was discontinued after 1977, but better equipped, quieter, and smoother-riding than the series it replaced. It was offered in four-door sedan, two-door coupé, three-door hatchback, and five-door station wagon configurations. The Concord was AMC's volume seller from the time it appeared until the introduction of the Renault Alliance.
The AMC Matador is a series of American automobiles that were manufactured and marketed by American Motors Corporation (AMC) across two generations, from 1971 through 1973 (mid-size) and 1974 until 1978 (full-size), in two-door hardtop and coupe versions, as well as in four-door sedan and station wagon body styles.
Richard Arthur Teague was an American industrial designer in the North American automotive industry. He held automotive design positions at General Motors, Packard, and Chrysler before becoming Vice President of Design for American Motors Corporation (AMC), and designed several notable show cars and production vehicles including AMC's Pacer, Gremlin, and Hornet models, as well as the Jeep Cherokee XJ and either designed or assisted in the designing of later cars for Chrysler such as the Jeep Grand Cherokee and Neon after American Motors' buyout.
The Rambler American is a compact car that was manufactured by the American Motors Corporation (AMC) between 1958 and 1969. The American was the second incarnation of AMC forerunner Nash Motors' compact Rambler that was introduced in 1950 and marketed after the merger with Hudson Motors under both marques during the 1954 and 1955 model years.
The Rambler Classic is an intermediate-sized automobile built and marketed by American Motors Corporation (AMC) from the 1961 through 1966 model years. The Classic replaced the Rambler Six and Rambler Rebel V8 names, which were retired at the end of the 1960 model year.
The Rambler Rebel is an automobile that was produced by the American Motors Corporation (AMC) of Kenosha, Wisconsin for the 1957 through 1960 model years, as well as again for 1966 and 1967.
The Rambler Marlin is a two-door fastback automobile produced in the United States by American Motors Corporation from 1965 to 1967. A halo car for the company, it was marketed as a personal luxury car.
The Rambler Tarpon was a concept car, a compact-sized sporty youth-oriented 2+2 hardtop coupé developed in 1963 by American Motors Corporation (AMC). The bright red with black roof design study made its public debut at the 1964 Chicago Auto Show. The car served to foretell the fastback design elements of the larger Rambler Marlin that was introduced in 1965.
The AMC AMX-GT is a concept car that was developed by American Motors Corporation (AMC) for the 1968 show car circuit. The design of the grand touring-type rear-wheel-drive pillarless coupe of monocoque construction with two doors and a truncated rear end treatment was influenced by AMC stylist Dick Teague.
The AMC AMX/3 is a mid-engine sports car from American carmaker American Motors Corporation (AMC), which was presented in March 1970 and was to be produced in Germany by Karmann from 1971. With this car, AMC wanted to compete with the similarly designed De Tomaso Pantera, that Ford sold in the USA. The car's body and drivetrain were originated and developed by AMC, and it was styled by Dick Teague. For the chassis and suspension development AMC consulted and partnered with Italian suppliers. The design was at first falsely attributed to Giotto Bizzarrini, but only specific components like certain suspension parts actually came from him. In addition, Italdesign, Autocostruzioni S.D. were also involved in the development. In the end the car never reached full production when, shortly after the official presentation, AMC abandoned the project without giving any reason after about half a dozen cars had been made. Several attempts to revive the design, including a limited production license proposal without AMC's involvement, branded as the Bizzarrini Sciabola, were unsuccessful. Later an AMC AMX/3 chassis formed the technical basis for the 1972 Iso Varedo concept car.
Cavalier all visual hints to the 1970 AMC Hornet.
| Vehicles |
|  | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Affiliations | ||||||||||||||||
| People |
| |||||||||||||||
| Facilities | ||||||||||||||||
| Related topics | ||||||||||||||||
