Adriatic Mills

Last updated
Adriatic Mills
AdriaticMills.jpg
c. 1977 photo
USA Massachusetts location map.svg
Red pog.svg
Usa edcp location map.svg
Red pog.svg
Location3–35 Armory St.,
Worcester, Massachusetts
Coordinates 42°14′48″N71°48′49″W / 42.24667°N 71.81361°W / 42.24667; -71.81361 Coordinates: 42°14′48″N71°48′49″W / 42.24667°N 71.81361°W / 42.24667; -71.81361
Built1854 (1854)
ArchitectEli Thayer
MPS Worcester MRA
NRHP reference No. 80000483 [1]
Added to NRHPMarch 5, 1980

The Adriatic Mills was a historic industrial complex on Armory Street in Worcester, Massachusetts. In 1854 Eli Thayer (best known for his abolitionist activities) constructed a stone industrial building known as the Lower Junction Shop, He constructed the mill with stone chips taken from Oread Hill in Worcester. The fine stone was mixed with a mortar forming a concrete. Wooden frames were mounted and the concrete was poured in and allowed to harden - no masonry being employed in raising the walls. The original building was 400 ft long. 40 ft wide and 2 stories high. Mr. Thayer then sold his interest in the building to Charles White and J.P. Southgate. Afterwards, it came into possession of Benjamin F. Joslyn, an arms manufacturer. He manufactured the Joslyn rifle, the first breech-loading rifle, on these premises before selling them in 1863 to the Jordan Marsh Company. Jordan Marsh expanded and repurposed the premises for the production of textiles, and gave the complex the name "Adriatic Mills". It continued to be used for textile production into the 1920s. [2]

The complex was listed on the National Register of Historic Places in 1980, at which time it was being used as a foundry by the Chromalloy Corporation. [2] It has since been demolished (c. 2009) to make way for redevelopment.

See also

Related Research Articles

Waucantuck Mill Complex United States historic place

The Waucantuck Mill Complex was a mill complex in Uxbridge, Massachusetts. Despite its 2010 demolition, it is still listed on the National Register of Historic Places. The original Luke Taft Mill, built in 1824, on the West River was very close to the present site of the Waucatuck Mill complex. The Waucantuck complex was planned for a condominium and retail complex, underway in 2009. Both are very close to and virtually part of the Wheelockville District, where the Stanley Woolen Mill was built in 1852. Wash and wear fabrics were first developed at this mill in the 20th century. Products were produced under the name of "Indian Head". In the 1960s the former holdings of American Woolen Company were eventually acquired by a company by that name in Uxbridge, MA. Originally the Uxbridge Worsted Company had proposed a buyout of American Woolen to become America's largest woolen conglomerate. The Town of Uxbridge was synonymous with the textile industry and its earliest and later developments.

Linwood Historic District (Northbridge, Massachusetts) United States historic place

The Linwood Historic District is an industrial historic district in the Linwood village of Northbridge, Massachusetts. It is the site of the Linwood Cotton Mill and is roughly bounded by Linwood Aveue, Maple Court, and Pine Court. On June 16, 1989, it was added to the National Register of Historic Places.

Bigelow Carpet Company Woolen Mills United States historic place

The Bigelow Carpet Company Woolen Mills are a historic mill complex on Main Street in Clinton, Massachusetts. The sprawling mill complex was built or expanded by the Bigelow Carpet Company, one of Clinton's leading business for much of the 19th and early 20th centuries. The complex was listed on the National Register of Historic Places in 1983. It continues to be adaptivelry reused by smaller businesses.

Bigelow Carpet Mill United States historic place

The Bigelow Carpet Mill is an historic textile mill complex at Union and High Streets in Clinton, Massachusetts. Built in 1847 and repeatedly enlarged until 1922, this large mill complex was one of the world's major early automated manufacturers of Brussels tapestry, established by Horatio and Erastus Bigelow. The mill was listed on the National Register of Historic Places in 1978.

Duck Mill United States historic place

The Duck Mill is an historic mill complex at 60 Duck Mill Road in Fitchburg, Massachusetts. With a construction history dating to the 1840s, it is one of the city's oldest surviving textile mills, now readapted to residential use. The complex, long used to produce cotton duck, was listed on the National Register of Historic Places in 1985.

Narragansett Mills United States historic place

Narragansett Mills is an historic textile mill site located at 1567 North Main Street in Fall River, Massachusetts, United States. Built in 1872, it is a well-preserved example of a brick mill complex, somewhat unusual in a city where most of the mills are stone. It was listed on the National Register of Historic Places in 1983.

Whittall Mills United States historic place

The Whittall Mills is an historic industrial complex off Brussels Street in southern Worcester, Massachusetts. The complex, which was built between 1870 and 1930, is a reminder of the large carpet manufacturing business that was once a major presence in the city. It is a complex of 15 brick buildings located on a bend of the Middle River, south of Crompton Street and just west of Interstate 290.

Ashworth and Jones Factory United States historic place

The Ashworth and Jones Factory is a historic building at 1511 Main Street in Worcester, Massachusetts. It is one of the architecturally finest mid 19th century factory buildings in the city. Built in 1870 and repeatedly enlarged, most of its sections retain high quality brickwork and mid-19th century Victorian styling. The factory was listed on the National Register of Historic Places in 1980. The complex has been converted into condominium residences known as Kettle Brook Lofts.

Crompton Loom Works United States historic place

The Crompton Loom Works is an historic industrial complex of the Crompton Corporation at 132-142 Green Street in Worcester, Massachusetts. The factory manufactured looms for textile factories. With its original portion dating to 1860, the complex is one of the oldest surviving industrial sites in the city. The facility was established by George Crompton, whose father William had invented the first power loom for weaving fancy fabrics. The younger Crompton's business would become of the most significant employers in the city, and his innovative looms would revolutionize the textile industry. Crompton and his successors would operate the loom manufacturing works at Green Street well into the 1960s. The manufacturing capabilities on the site were applied to producing can packaging machines and bowling pinsetters. Capabilities at the Green Street facility included machining, drop hammer forging, a cast iron foundry, wood working. and pattern making, along with a materials testing lab.. The building has subsequently been adapted to other uses. The complex was listed on the National Register of Historic Places in 1980, and included as part of the Blackstone Canal Historic District in 1995.

Junction Shop and Hermon Street District United States historic place

The Junction Shop and Hermon Street District is a historic district comprising 28 industrial properties on Jackson, Hermon, and Beacon Streets on the south side of Worcester, Massachusetts. It is a remnant of a once larger 19th and early 20th century manufacturing district just west of the railway junction between the Boston and Maine Railroad and the New York, New Haven and Hartford Railroad. It was listed on the National Register of Historic Places in 1980.

Central Mills Historic District United States historic place

The Central Mills Historic District encompasses a historic mill complex on the Quinebaug River in central Southbridge, Massachusetts. Located at the corner of Foster and North Streets, the site consists of three brick buildings, the oldest of which has portions dating to 1837. Despite being extensively rebuilt in the early 20th century, the complex has an appearance that is more typical of 19th century mills.

Minterburn Mill United States historic place

Minterburn Mill is a former textile mill complex located at 215 East Main Street, in the Rockville village of Vernon, Connecticut. Developed beginning in 1834, it was the first place in Rockville to be developed industrially, and the surviving buildings provide a view of evolutionary changes in mill architecture. The mill was listed on the National Register of Historic Places in 1984. It was converted into an apartment complex in 2016 by the state.

H. W. Clark Biscuit Company United States historic place

The H. W. Clark Biscuit Company is a former industrial complex at 179-191 Ashland Street in North Adams, Massachusetts. The bakery that Herbert W. Clark built at this site began at a facility on Liberty Street, and expanded into a shoe factory building that Clark had operated with a partner. When the Liberty Street plant was destroyed by fire in 1913, Clark placed its employees on a second shift in the shoe factory building, and had the building now called the Icing Building constructed. This building was built in a style reminiscent of mills built in North Adams fifty years earlier, and is still sometimes thought to be an older building.

Wood Worsted Mill United States historic place

The Wood Worsted Mill is located at South Union St. and Merrimack Street, on the south bank of the Merrimack River, in Lawrence, Massachusetts. The mill building was constructed between 1906 and 1909 for the American Woolen Company, and was dubbed by some locals as the "eighth wonder of the world" due to its size. It is a six-story brick building that is 1,300 feet (400 m) long and 125 feet (38 m) high, and encompasses some 17 miles (27 km) of aisles. Its purpose when built was to perform the complete textile manufacturing cycle of worsted woolens, from raw material to finished fabric, under a single roof.

Heaton and Cowing Mill United States historic place

The Heaton and Cowing Mill is a historic industrial facility at 1115 Douglas Avenue in Providence, Rhode Island. The small mill complex consists of three connected building sections; the oldest is a c. 1832 rubble-walled two story mill building constructed by David Heaton and Martin Cowing on the banks of the West River. The partners used the facility to manufacture and dye cotton cloth. The building is the remnant of a much larger Geneva Worsted Company works that Heaton and Cowing built on the site in the 1860s and 1870s. The building was used, with a major brick addition c. 1930, for textile production until the 1950s, until its last textile owner, the Wanskuck Mill, shut down. It served a variety of light industrial businesses, and in 1982 a concrete block building was added to its rear. Most of its original waterworks infrastructure has either been filled in, or was destroyed by flooding in 2010.

Cocheco Mills United States historic place

The Cocheco Mills are a historic mill complex in the heart of Dover, New Hampshire. The mills occupy a site at a bend in the Cocheco River that has been the site of industrial activity since at least 1822, when the Dover Cotton Factory was built there. The present mill buildings were built between the 1880s and the early 20th century, and were listed on the National Register of Historic Places in 2014.

Salmon Falls Mill Historic District United States historic place

The Salmon Falls Mill Historic District encompasses a historic mill complex on Front Street in Rollinsford, New Hampshire. The complex includes four major structures and seven smaller ones, on about 14 acres (5.7 ha) of land along the Salmon Falls River. They were built between about 1840 and the mid-1860s, and have an unusual architectural unity, for additions made to the buildings were done with attention to matching design elements from the existing structures. The Number 2 Mill, built in 1848, was an early location where a turbine was used instead of a waterwheel to provide power to the mill machinery. The district was listed on the National Register of Historic Places in 1980.

Blackstone River Valley National Historical Park

Blackstone River Valley National Historical Park is a National Park Service unit in the states of Rhode Island and Massachusetts. The park was created for the purpose of preserving, protecting, and interpreting the industrial heritage of the Blackstone River Valley and the urban, rural, and agricultural landscape of that region. The Blackstone River Valley was the site of some of the earliest successful textile mills in the United States, and these mills contributed significantly to the earliest American Industrial Revolution. The subsequent construction of the Blackstone Canal, a few years after the successful completion of the Erie Canal, helped to sustain the region's industrial strength.

Manchaug Village Historic District United States historic place

The Manchaug Village Historic District is a historic district encompassing the 19th century industrial village center of Manchaug in Sutton, Massachusetts. Developed in the 1820s around textile mills on the Mumford River, it was the largest industrial area in Sutton, with at least three mill complexes in operation. The district is centered on the junction of Main Street with Manchaug, Putnam Hill, and Whitins Roads.

Dodgeville Mill United States historic place

The Dodgeville Mill is a historic mill complex at 453 South Main Street in Attleboro, Massachusetts. With industrial history dating to 1809, it is one of the city's oldest industrial sites. The complex now consists of an accretion of frame and brick buildings, constructed over the 19th and early 20th centuries. Textile production, which included manufacture of Fruit of the Loom branded products, ended at the site in 1970s.

References

  1. "National Register Information System". National Register of Historic Places . National Park Service. April 15, 2008.
  2. 1 2 "NRHP nomination for Adriatic Mills". Commonwealth of Massachusetts. Retrieved 2014-01-04.