Area codes 706 and 762

Last updated October 22, 2022

Area codes 706 and 762 are telephone area codes in the North American Numbering Plan (NANP) for the northern and west central parts of Georgia, but excluding metropolitan Atlanta.

The numbering plan area (NPA) is divided into two disconnected geographical regions. A small section is in west-central Georgia, in the region around Columbus. This is bordered by area code 334 to the west in Alabama, area code 478 to the east, area code 229 to the south, and metro Atlanta's 404, 678, 770, and 470. It does not border the landline area of 404, only the cellphone area.

The major section of 706 wraps around from Rome in northwest Georgia, east through the mountains past Dahlonega, meeting its narrowest point at Toccoa, then broadening south to Athens and Augusta. It touches Alabama's area code 256/938 and 334 on the far west, Tennessee's area code 423 on the northwest, North Carolina's area code 828 and Upstate South Carolina's area code 864 to the north-northeast, and midlands area codes 803 and 839 to the east, and middle Georgia's 478 and metro Atlanta as above.

History

When the North American Numbering Plan was created in 1947, the entire state of Georgia was assigned area code 404. On July 1, 1954, the southern portion of the state, from Macon southward, was split off with area code 912. Area code 404 was limited to the northern half of the state, from the Tennessee and North Carolina state lines as far south as Columbus and Augusta. This configuration remained in place for 38 years.

In 1992, almost all of the old 404 territory outside the Atlanta area was split off as area code 706. Originally, 706 consisted of a horseshoe-shaped region that completely wrapped around the inner ring of Atlanta. It also included a number of southern exurbs of Atlanta. However, the residents of these areas felt chagrin at no longer being associated with 404. Shortly after 706 commenced service, BellSouth returned several of these areas to 404. The boundary was redrawn in such a way that isolated Columbus and the surrounding area from the rest of the 706 territory, making 706 one of the few area codes that is not contiguous.

BellSouth and the Georgia Public Service Commission knew that due to Atlanta's explosive growth, 404 was still on the brink of exhaustion even after the creation of 706. They had already planned to introduce 770 as the area code for Atlanta's suburban ring later in the 1990s. However, the return of the southern exurbs forced the GPSC to put 770 into service in 1995, a few years sooner than planned.

In June 2005, the GPSC announced that 706 had nearly exhausted its capacity for new telephone exchange prefixes. On June 24, 2005, the NANPA assigned area code 762 for this purpose. However, the Columbus area was not large enough for its own area code, but was too large to stay in 706. For this reason, it was decided to make 762 an overlay, with permissive dialing allowed on September 3. On April 1, 2007, ten-digit dialing became mandatory in the 706/762 territory.

Despite the rapid growth in 706/762's main section (particularly the northern portion), it is nowhere near exhausting. Under current projections, it is expected to remain in its unusual, non-contiguous state until after 2049. ^[1]

Prior to 1990, area code 706 was used for dialing parts of the Baja California areas of Mexico from the United States.^[2]

Service area

The 706/762 overlay serves the following counties: Banks, Burke (part with area code 478), Chattooga, Catoosa, Chattahoochee, Clarke, Columbia, Dade, Dawson, Elbert, Fannin, Franklin, Floyd, Gilmer, Glascock, Gordon, Greene, Habersham, Hancock, Harris, Hart, Heard, Jackson, Jasper, Jefferson (part with area code 478), Jenkins, Lincoln, Lumpkin, Madison, McDuffie, Meriwether, Morgan, Murray, Muscogee, Oconee, Oglethorpe, Putnam, Rabun, Richmond, Stephens, Talbot, Taliaferro, Towns, Troup, Union, Upson (part with area code 478), Walker, Warren, White, Whitfield, and Wilkes

Related Research Articles

The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the international calling code 1. Some North American countries, most notably Mexico, do not participate in the NANP.

Area codes 850 and 448 are telephone area codes in the North American Numbering Plan for the Florida Panhandle, including Pensacola, Tallahassee and Panama City. Area code 850 was created in 1997 in a split from 904, and area code 448 was assigned as a second code to the same area in an overlay plan in 2019, and mandatory ten-digit local calling began in May 2021.

Area codes 954 and 754 are the telephone area codes in the North American Numbering Plan (NANP) for Broward County, Florida. Notable cities in the numbering plan area are Fort Lauderdale, Plantation, Hollywood, Sunrise, Pompano Beach, Coral Springs, Deerfield Beach, Davie, Weston, Dania Beach, Oakland Park and Pembroke Pines.

Area codes 508 and 774 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. state of Massachusetts. The numbering plan area comprises south-central and most of southeastern Massachusetts. It includes Worcester, Outer south and southwest Greater Boston, as well as Fall River, New Bedford, Cape Cod, Martha's Vineyard, and Nantucket.

Area code 516 is a telephone area code of the North American Numbering Plan (NANP) in the U.S. state of New York. The numbering plan area (NPA) comprises the Nassau County portion of Long Island.

Area code 404 is a telephone area code in the North American Numbering Plan (NANP) for Atlanta, Georgia and its closest suburbs. This comprises roughly the area encircled by Interstate 285. It is an enclave area code, surrounded by area code 770, which serves most of Atlanta's suburbs. Both 404 and 770 are overlaid by area codes 678, 470, and 943.

Area codes 402 and 531 are telephone area codes in the North American Numbering Plan (NANP) for eastern Nebraska. Area code 402 was one of the original area codes created in 1947, when it was assigned to the entire state. After splitting the numbering plan area (NPA) in 1954, when the numbering plan area (NPA) was reduced to roughly just the eastern half, the North American Numbering Plan Administrator authorized an overlay plan for which area code 531 was added to the same service area in 2011.

Area code 813 is an area code in the North American Numbering Plan (NANP) for the city of Tampa, Florida, and surrounding areas such as Zephyrhills and Oldsmar.

Area codes 812 and 930 are telephone area codes in the North American Numbering Plan (NANP) for the southern third of the state of Indiana.

<span class="mw-page-title-main">Area codes 208 and 986</span> Area codes for all of Idaho, United States

Area codes 208 and 986 are the area codes in the North American Numbering Plan for all of Idaho. Area code 208 is one of the 86 original area codes created by AT&T in 1947. It was Idaho's sole area code until 2017, when 986 was added as an overlay plan for the entire state.

Area code 250 is a telephone area code in the North American Numbering Plan (NANP) for the Canadian province of British Columbia outside the Lower Mainland, including Vancouver Island–home to the provincial capital, Victoria–and the province's Interior region. In addition, the numbering plan area extends into the United States community of Hyder, Alaska, located along the Canada–United States border near the town of Stewart. The incumbent local exchange carriers that service the area code are Telus, Northwestel, and CityWest in the city of Prince Rupert.

Area code 770 is a telephone area code in the North American Numbering Plan (NANP) serving all or part of 29 counties in North Georgia, including most of Atlanta's suburbs. It was created in 1995 in a split of numbering plan area (NPA) 404.

Area codes 678, 470, and 943 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. State of Georgia in the Atlanta metropolitan area. The area codes are assigned in an overlay plan to a combined numbering plan area (NPA) consisting of 404 and 770.

Area codes 510 and 341 are telephone area codes in the North American Numbering Plan (NANP) serving much of the East Bay in the U.S. state of California. They cover parts of Contra Costa County and western Alameda County, including the city of Oakland, but excluding Dublin, Livermore, Pleasanton, and Sunol.

<span class="mw-page-title-main">Area code 360</span> Area code for western Washington, United States

Area code 360 is the telephone area code for western Washington state outside metropolitan Seattle. It began service on January 15, 1995. The numbering plan area (NPA), which encompasses all of western Washington outside urban King, Pierce, and Snohomish counties and Bainbridge Island, was previously part of area code 206. Area codes 360 and 334 (Alabama), which began service on the same day, were the first two area codes in the North American Numbering Plan with a middle digit other than 0 or 1.

Area codes 803 and 839 are telephone area codes in the North American Numbering Plan (NANP) for the central part of the U.S. State of South Carolina. The numbering plan area (NPA) is anchored by the city of Columbia, the state capital. It also includes most of the South Carolina portions of the Charlotte, North Carolina and Augusta, Georgia metropolitan areas. 839, an all-service overlay, was approved by the South Carolina Public Service Commission in 2019.

Area code 912 is a telephone area code in the North American Numbering Plan (NANP) for the southeastern part of the U.S. state of Georgia. The numbering plan area contains Savannah, Richmond Hill, Hinesville, Vidalia, Metter, Reidsville, Homerville, Waycross, Brunswick, Folkston, Douglas, Statesboro, Ludowici, Jesup and Kingsland. The area code was created in 1954 in an area code split from area code 404, which had been assigned to the entire state in 1947.

Area code 478 is a telephone area code serving part of the state of Georgia, in the United States. It covers Macon and central Georgia. It was formerly part of area code 912. The new area code, along with area code 229, became effective in 2001 in a 3-way split.

Area codes 843 and 854 are telephone area codes in the North American Numbering Plan (NANP) for that portion of the U.S. state of South Carolina comprising roughly the eastern third and the southern tip. The numbering plan area (NPA) includes the Grand Strand, the Lowcountry, the Pee Dee, and the Sandhills. Major cities in the region are Myrtle Beach, Charleston, Beaufort, Hilton Head Island and Florence. Area code 843 was created in 1998 when area code 803 was split, while 854 was added in 2015 to form an all-services overlay.

References

↑ "NANPA Exhaust Projections 2019" (PDF). Archived from the original (PDF) on 2020-02-21. Retrieved 2019-10-21.
↑ Williams, Jack; Siringer, June (1986). The Magnificent Peninsula: The Only Absolutely Essential Guide to Mexico's Baja California. H.J. Williams Pub. p. 80. ISBN 978-0-9616843-0-3.

External links

Georgia area codes: 229, 404, 470/678, 478, 706/762, 770, 912
	North: 423
West: 256/938, 334	area code 706/762 nearly completely surrounds 470, 678 and 770	East: 864
	South: 229, 478
Alabama area codes: 205/659, 251, 256/938, 334
Tennessee area codes: 423, 615/629, 731, 865, 901, 931
North Carolina area codes: 252, 336/743, 704/980, 828, 910, 919/984
South Carolina area codes: 803/839, 843/854, 864

Coordinates: 33°57′26″N83°22′36″W / 33.95735°N 83.37680°W / 33.95735; -83.37680

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] "NANPA Exhaust Projections 2019" (PDF). Archived from the original (PDF) on 2020-02-21. Retrieved 2019-10-21.

[2] Williams, Jack; Siringer, June (1986). The Magnificent Peninsula: The Only Absolutely Essential Guide to Mexico's Baja California. H.J. Williams Pub. p. 80. ISBN 978-0-9616843-0-3.

[1]

[2]