Australian floating crane Titan

Last updated

Titan and Sydney mast.jpg
The floating crane Titan, being towed under the Sydney Harbour Bridge with the foremast of HMAS Sydney in 1929. The mast is to be installed at Bradleys Head.
History
Australia
NameTitan
Ordered5 October 1916
Builder Cowans, Sheldon & Co., Carlisle, England
Launched5 December 1917
Completed3 December 1919
In service1919
Out of service1991
Homeport Cockatoo Island Dockyard
FateScuttled, 29 December 1992
General characteristics
Type Crane vessel
Displacement2,125 tonnes (2,091 long tons; 2,342 short tons)
Length176 ft (54 m)
Beam79 ft 8 in (24.28 m)
Draught13 ft (4.0 m)
PropulsionNone
CapacityLift of 150 tonnes (148 long tons; 165 short tons)
ArmamentNone

Titan was a floating crane that operated in Sydney Harbour from 1919 until 1991. She was fabricated in Carlisle in the United Kingdom and then sent to Cockatoo Island Dockyard in Sydney for assembly before entering service with the Royal Australian Navy (RAN).

Contents

After being declared surplus to requirements, the crane became the property of Cockatoo Island Dockyard, which operated it until the dockyard's closure in 1991. Although heritage-listed, Titan was sold to a Singaporean company, and authorisation was given to tow her to Singapore in 1992. During the tow, the crane's barge inverted on 24 December, and the crane was scuttled five days later.

Design and construction

Titan was fabricated in the United Kingdom during World War I by Cowans, Sheldon & Company of Carlisle, then transported to Australia in parts for assembly at Cockatoo Island Dockyard, Sydney. [1] Ordered on 5 October 1916, construction at Cockatoo commenced on 7 March 1917. [2] The crane was launched on 5 December 1917. [2] However, during construction, the 40-ton lead screws for the crane's jib arm were lost when the merchant ship Afric was torpedoed. [1] The crane could be used in a limited capability, although it was not until 1919 that replacement screws of sufficient quality were acquired. [1] Titan was completed on 3 December 1919. [2] On completion, the crane was handed over to the RAN. [3]

Titan's cantilever-jib arm could reach 190 feet (58 m) above the surface at maximum extension. [4] The crane could lift up to 150 tonnes (150 long tons ; 170 short tons ) at an arm radius of 90 feet (27 m), or 125 tonnes (123 long tons; 138 short tons) at 125 feet (38 m). [4] Two 75-tonne (74-long-ton; 83-short-ton) counterweights were used to ballast the load; water ballast tanks could also be used, but this rarely occurred. [4] [3] The crane was supported by a lattice mast fitted to a riveted-steel pontoon barge that was 176 feet (54 m) long, 79 feet 8 inches (24.28 m) wide, and had a depth of 13 feet (4.0 m). [4] [3] The crane was not self-propelled, and required two or three tugboats to manoeuvre her around. [4] Power for lifting and rotating was supplied by a coal-fired boiler supplying three steam generators (two 220 kilowatt generators and a 44 kilowatt auxiliary). [4] The only connection between the crane arm and the lattice mast were drive shafts for the slewing (rotational) motors. [3] Titan had a maximum displacement of 2,125 tonnes (2,091 long tons; 2,342 short tons). [3] [4]

Operational history

Titan's main purpose was to provide heavy lifting services for Cockatoo Island Dockyard; installing ships' boilers and propulsion equipment, transporting heavy machinery to and from the island, and launching small craft. [5] The crane also saw use unloading heavy deck cargo from ships, assisted in the construction of power plants, bridges, and other structures around Sydney Harbour and the attached tributaries, and was occasionally used for the salvage of vessels sunk in the harbour. [6] Early in her career, the crane was used throughout the entire harbour, but the barge's poor seakeeping ability made it dangerous to tow the crane across Sydney Heads, and she was later banned from operating north and east of Bradleys Head. [7]

Titan lifting a replacement bow for USS New Orleans in 1943 Titan lifting temporary bow to be welded to USS New Orleans.jpg
Titan lifting a replacement bow for USS New Orleans in 1943

A modernisation of Titan began in the late 1960s. [5] During the modernisation, the RAN decided that the crane was surplus to requirements, and suspended the upgrade in 1975. [8] Cockatoo Island Dockyard saw the value of keeping Titan in service, and continued the upgrades, including replacement of the steam-powered system with diesel generators. [8]

In 1989, surveyors refused to renew the crane's port craft licence because of the age of the vessel; in particular, rivets used during the pontoon's construction were showing signs of wear-and-tear. [9] The dwindling need for the crane's services and the cost of completely refurbishing the craft saw the dockyard remove Titan from commercial service in 1991. [9] Approval for short-term projects was granted over the following two years, including the unloading and reloading of the locomotive Flying Scotsman during its visit to Australia, and the dismantling of a shore-based crane at Cockatoo Island. [9]

Sinking

After the closure of Cockatoo Island Dockyard in 1991, the Australian government decided to sell Titan. [9] She was initially sold in April 1992 to a New Zealand company, which originally intended to return her to service. [9] However, there was no longer any demand for the crane's services in Sydney, and Titan was on-sold to the Singapore-based Wirana Shipping Corporation in December 1992. [9] [10] Although Titan was listed for protection under the Protection of Moveable Cultural Heritage Act 1986 , permission to export the crane to Singapore was approved on the condition that she return to Sydney by July 1995. [9] The crane left Sydney Harbour on 23 December 1992, towed by Wirana's Rapuhia, a former research vessel. [9] [11] Although Rapuhia was physically capable of towing the crane, she was unregistered, and several safety certifications had expired or lapsed. [3]

Ten minutes before 23:00 on 24 December, observers aboard Rapuhia felt the ship jerk, and noticed that the navigational lights on Titan were no longer visible; further inspection found that the tow-line had snapped, and the barge was found nearby, having rolled over. [12] [13] The official report states that Rapuhia towed the barge south to a suitable area for scuttling, but several people involved in the salvage and scuttling operation claim that the towing cable wrapped around the propeller shafts, and both Rapuhia and Titan drifted without control until divers cut the cable free. [13] The crane arm fell off while the pontoon was inverted. [12]

The barge was manoeuvred to a point 2 nautical miles (3.7 km; 2.3 mi) south-east of Camden Head. [12] After several days inspection, it was determined that the remains could not be salvaged, and plans were made to scuttle her. [12] A combination of a lift balloon and the cutting of holes in the bilges allowed the barge to be brought from an inverted position to roughly 90 degrees from vertical, before she was scuttled on 29 December at 09:00, sinking in 33 metres (108 ft) of water. [12] [14] 31°39′51″S152°52′24″E / 31.664267°S 152.873330°E / -31.664267; 152.873330 Subsequent investigation by the Department of Transport and Communication found that several rivets had failed on the starboard side of the pontoon, causing it to take large volumes of water. [12] This loss of stability, combined with ocean and water conditions, plus the stresses of the tow, resulted in Titan rolling over and capsizing. [12]

Citations

  1. 1 2 3 Jeremey, Cockatoo Island, p. 75
  2. 1 2 3 Jeremey, Cockatoo Island, p. 220
  3. 1 2 3 4 5 6 Lucas, Death of a Titan, p. 20
  4. 1 2 3 4 5 6 7 Jeremey, Cockatoo Island, p. 187
  5. 1 2 Jeremey, Cockatoo Island, p. 188
  6. Jeremey, Cockatoo Island, pp. 188-9
  7. Lucas, Death of a Titan, pp. 20-1
  8. 1 2 Jeremey, Cockatoo Island, p. 189
  9. 1 2 3 4 5 6 7 8 Jeremey, Cockatoo Island, p. 190
  10. Lucas, Death of a Titan, pp. 18–9
  11. Lucas, Death of a Titan, p. 19-20
  12. 1 2 3 4 5 6 7 Jeremey, Cockatoo Island, p. 191
  13. 1 2 Lucas, Death of a Titan, p. 21
  14. Lucas, Death of a Titan, pp. 22–23

Related Research Articles

<span class="mw-page-title-main">Dry dock</span> Basin drained to allow work on a vessel

A dry dock is a narrow basin or vessel that can be flooded to allow a load to be floated in, then drained to allow that load to come to rest on a dry platform. Dry docks are used for the construction, maintenance, and repair of ships, boats, and other watercraft.

HMAS <i>Encounter</i> (1902) British and Australian naval cruiser

HMAS Encounter was a second-class protected cruiser of the Challenger class operated by the Royal Navy (RN) and Royal Australian Navy (RAN). She was built by HM Dockyard Devonport and completed at the end of 1905.

<span class="mw-page-title-main">Cockatoo Island</span> Heritage listed island in Sydney Harbour

Cockatoo Island Wareamah is a UNESCO World Heritage Site at the confluence of the Parramatta River and Lane Cove River in Sydney Harbour, New South Wales, Australia.

<span class="mw-page-title-main">Garden Island (New South Wales)</span> Locality in Sydney, New South Wales, Australia

Garden Island is an inner-city locality of Sydney, Australia, and the location of a major Royal Australian Navy (RAN) base. It is located to the north-east of the Sydney central business district and juts out into Port Jackson, immediately to the north of the suburb of Potts Point. Used for government and naval purposes since the earliest days of the colony of Sydney, it was originally a completely-detached island but was joined to the Potts Point shoreline by major land reclamation work during World War II.

<span class="mw-page-title-main">Cockatoo Island Dockyard</span> Australian dockyard

The Cockatoo Island Dockyard was a major dockyard in Sydney, Australia, based on Cockatoo Island. The dockyard was established in 1857 to maintain Royal Navy warships. It later built and repaired military and battle ships, and played a key role in sustaining the Royal Australian Navy. The dockyard was closed in 1991, and its remnants are heritage listed as the Cockatoo Island Industrial Conservation Area.

<span class="mw-page-title-main">Marine salvage</span> Recovering a ship or cargo after a maritime casualty

Marine salvage is the process of recovering a ship and its cargo after a shipwreck or other maritime casualty. Salvage may encompass towing, lifting a vessel, or effecting repairs to a ship. Protecting the coastal environment from oil spillages or other contaminants from a modern ship can also be a motivator, as oil, cargo, and other pollutants can easily leak from a wreck.

HMAS <i>Torrens</i> (D67) River-class torpedo-boat destroyer of the Royal Australian Navy

HMAS Torrens, named for the River Torrens, was a River-class torpedo-boat destroyer of the Royal Australian Navy (RAN). The destroyer was built at Cockatoo Island Dockyard and entered service with the RAN in 1916. The destroyer was first deployed to East Asia, then the Mediterranean, where she remained for the rest of World War I. After returning to Australia, the destroyer was decommissioned, but saw use in several ports for reservist training before the decision to sell her for scrap was made. After being stripped, the destroyer was towed outside Sydney Heads, used for gunnery practice, and scuttled.

<span class="mw-page-title-main">Crane vessel</span> Ship with a crane specialized for lifting heavy loads

A crane vessel, crane ship, crane barge, or floating crane is a ship with a crane specialized in lifting heavy loads, typically exceeding 1,500 t for modern ships. The largest crane vessels are used for offshore construction.

HMAS <i>Vigilant</i> Australian auxiliary patrol boat

HMAS Vigilant was an auxiliary patrol boat serving with the Royal Australian Navy during the Second World War. Notably it was the 120th ship built by the Cockatoo Island Dockyard and the first aluminium ship built in Australia.

<span class="mw-page-title-main">Floating sheerleg</span> Floating water vessel with a crane built on shear legs

A floating sheerleg is a floating water vessel with a crane built on shear legs. Unlike other types of crane vessel, it is not capable of rotating its crane independently of its hull.

<span class="mw-page-title-main">Fitzroy Dock</span> Historic site in New South Wales, Australia

Fitzroy Dock is a heritage-listed dockyard at the former Cockatoo Island Dockyard, Cockatoo Island, Sydney Harbour, New South Wales, Australia. It was added to the Australian Commonwealth Heritage List on 22 June 2004.

HMS <i>Pelican</i> (1877) Sloop of the Royal Navy

HMS Pelican was an Osprey-class sloop built for the Royal Navy in the mid-1870s. She was launched in 1877 and was sold to the Hudson's Bay Company in 1901. She was scuttled in 1953.

Bellubera Ferry operated by the Port Jackson & Manly Steamship Company

Bellubera was a ferry operated by the Port Jackson & Manly Steamship Company on the Manly service. Launched in 1910, she was the third of six "Binngarra-type" vessels. Upon her 1936 conversion from steam power, she became the first diesel-electric vessel in Australia. She was decommissioned in 1973, and scuttled at sea in 1980.

<i>Herman the German</i> (crane vessel) Floating crane

Titan, better known by its former nickname Herman the German, is a large floating crane currently serving in the Panama Canal performing heavy lifts for lock maintenance. Prior to its move to Panama in 1996, the crane was based at the Long Beach Naval Shipyard from the end of World War II until the yard's closure in 1995. It was seized from the German Kriegsmarine following the end of World War II as part of war reparations. The crane was built by Demag Cranes AG as Schwimmkran nr. 1 in 1941 for the Kriegsmarine, where it had served in the Baltic Sea tending German U-boats. MMSI number: 374940000

CLS4 Carpentaria

Commonwealth Lightship 4 (CLS4) Carpentaria is a lightship that was in service from 1917 to 1985 with the Commonwealth Lighthouse Service, built at the Cockatoo Island Dockyard and commissioned in 1917. The vessel is named after the Gulf of Carpentaria, where it spent most of its service life together with its sister ship CLS2.

<i>Langer Heinrich</i> (crane vessel)

Langer Heinrich, or in English Long Henry, is a floating crane commissioned in 1915 for the Wilhelmshaven Imperial Shipyard in Wilhelmshaven, Germany and has been located in Genoa, Italy since 1997. At the time of completion she was the largest floating crane in the world, passing up the Ajax crane barge completed in 1914.

<span class="mw-page-title-main">Cockatoo Island Industrial Conservation Area</span> Historic site in New South Wales, Australia

Cockatoo Island Industrial Conservation Area is a heritage-listed protected area relating to the former Cockatoo Island Dockyard at Cockatoo Island, Sydney Harbour, New South Wales, Australia. It was added to the Australian Commonwealth Heritage List on 22 June 2004.

<span class="mw-page-title-main">Block-setting crane</span> Crane type for installing large stone blocks

A block-setting crane is a form of crane. They were used for installing the large stone blocks used to build breakwaters, moles and stone piers.

<span class="mw-page-title-main">Garden Island Naval Precinct</span> Heritage-listed naval base and defence precinct located at Cowper Wharf Roadway

The Garden Island Naval Precinct is a heritage-listed naval base and defence precinct located at Cowper Wharf Roadway in the inner eastern Sydney neighbourhood of Garden Island, New South Wales, Australia. The precinct was built from 1856. It includes the HMAS Kuttabul naval base, formerly known as HMAS Penguin. The property is owned by Australian Department of Defence. It was added to the Commonwealth Heritage List on 22 June 2004 and the New South Wales State Heritage Register on 12 November 2004.

USS <i>Hidatsa</i> Abnaki-class tugboat

USS Hidatsa (ATF-102) was Abnaki-class tugboat during the World War II. The ship was later sold to Colombia as ARC Rodrigo de Bastidas (RM-74). Her namesake is an Indian group of the Sioux Tribe of North Dakota, now living on the Fort Berthold Reservation.

References