BMW N63 engine | |
---|---|
Overview | |
Production | 2008–present |
Layout | |
Configuration | 90° V8 |
Displacement | 4.0 L (3,982 cc) 4.4 L (4,395 cc) |
Cylinder bore | 89 mm (3.50 in) |
Piston stroke | 80 mm (3.15 in) 88.3 mm (3.48 in) |
Cylinder block material | Aluminium |
Cylinder head material | Aluminium |
Valvetrain | DOHC w/ VVT |
Combustion | |
Turbocharger | Twin-turbo |
Fuel type | Petrol |
Chronology | |
Predecessor | BMW N62 |
The BMW N63 is a twin-turbocharged petrol V8 engine which has been in production from 2008 to present. The N63 is the world's first production car engine to use a "hot-vee" layout, with the turbochargers located inside the "V" of the engine. It is also BMW's first turbocharged petrol V8 engine. The engine has been widely noted for its mechanical issues, undergoing several recalls. [1] [2] [3] [4] [5] [6]
The N63 replaced the BMW N62 (a naturally aspirated V8 engine) and was first used in the 2008 X6 xDrive50i. [7]
The S63 engine is the BMW M high-performance version of the N63.
Alpina versions of the N63 are used in various F01 7 Series, F10 5 Series, G11 7 Series, G15 8 Series and G30 5 Series models.
The airflow path through the engine uses a "hot-vee" layout, where the exhaust manifolds and turbochargers are located between the cylinder banks (on the "inside" of the V8) and the intake manifolds are located on the outside of the engine. [8] This is opposite to the traditional layout for a V8, where the intake is inside the "V" and the exhaust manifold is on the outside. The hot-vee layout reduces the width of the engine and decreases the exhaust runner length from the exhaust valves to the turbochargers. The engine uses air-to-water intercoolers, therefore improving throttle response. [7] [9]
Similar to the N54B30, the initial N63 (including the S63) did not use Valvetronic (variable valve lift) because its benefit of reducing of intake vacuum is not as important in turbocharged engines. [10] Due to the presence of turbocharging, the N63 does not use a variable-length intake manifold.
The N63 is BMW's first V8 engine to use direct injection.
The N63/S63 uses a bore of 89 mm (3.50 in) and a stroke of 88.3 mm (3.48 in) [except for the Chinese market 89 mm (3.50 in) and a stroke of 80 mm (3.15 in)].
In 2012, a "Technical Update" was applied to the N63, resulting in the N63TU variants (also known as N63B44O1). The main upgrade was the addition of Valvetronic. [11] [12] Other changes include revised turbochargers, removal of the blowoff valve, lighter pistons, forged connecting rods and crankshaft, addition of a valve cover labyrinth oil catch/return system, new valve stem seals, revised fuel system and addition of a second coolant pump. [10]
A second Technical Update occurred in 2016, resulting in the N63TU2 variants (also known as N63B44O2). The major changes are the use of twin-scroll turbochargers, a wider powerband and the oil/coolant heat exchanger being moved to within the "V" of the engine. [13]
A third Technical Update was introduced in 2018. Two variants are offered: N63B44M3 [14] and N63B44T3. [15] N63B44M3 features improved thermal shielding for the crankcase and the cylinder head, and a new ignition system. The N63B44T3 gains higher pressure (5000psi) injectors, larger twin-scroll turbochargers, a redesigned intake manifold, and an upstream cooling radiator.
Engine | Displacement | Power | Torque | Years |
---|---|---|---|---|
N63B40A | 3,982 cc | 300 kW (402 hp) at 5,500 rpm | 600 N⋅m (443 lb⋅ft) at 1,750-4,500 rpm | 2012–2015 |
331 kW (444 hp) at 5,500 rpm | 650 N⋅m (479 lb⋅ft) at 1,750-4,500 rpm | |||
N63B44O0 | 4,395 cc | 300 kW (402 hp) at 5,500-6,400 rpm | 600 N⋅m (443 lb⋅ft) at 1,750-4,500 rpm | 2008–2013 |
N63B44O1 | 331 kW (444 hp) at 5,500-6,000 rpm | 650 N⋅m (479 lb⋅ft) at 2,000-4,500 rpm | 2013–2016 | |
N63B44O2 | 650 N⋅m (479 lb⋅ft) at 1,800-4,500 rpm | 2016–2020 | ||
N63B44M3 | 340 kW (456 hp) at 5,250-6,000 rpm | 650 N⋅m (479 lb⋅ft) at 1,500-4,750 rpm | 2018–present | |
N63B44T3 | 390 kW (523 hp) at 5,500-6,000 rpm | 750 N⋅m (553 lb⋅ft) at 1,800-4,600 rpm | ||
S63B44O0 | 408 kW (547 hp) at 6,000 rpm | 680 N⋅m (502 lb⋅ft) at 1,500-5,650 rpm | 2010–2013 | |
S63B44T0 | 412 kW (553 hp) at 6,000-7,000 rpm | 680 N⋅m (502 lb⋅ft) at 1,500-5,750 rpm | 2011–2018 | |
S63B44T2 | 423 kW (567 hp) at 6,000-6,500 rpm | 750 N⋅m (553 lb⋅ft) at 2,200-5,000 rpm | 2015–2018 | |
S63B44T4 | 441 kW (591 hp) at 5,600-6,700 rpm | 750 N⋅m (553 lb⋅ft) at 1,800-5,600 rpm | 2018–present | |
460 kW (617 hp) at 5,600-6,700 rpm | 750 N⋅m (553 lb⋅ft) at 1,800-5,800 rpm | 2019–present [16] | ||
This smaller variant was sold in the Chinese market. Due to a shorter stroke length of 80 mm (3.15 in), the capacity is reduced to 3,982 cc (243.0 cu in). [17]
Applications:
The initial version of the N63 produces 300 kW (402 bhp) and 600 N⋅m (443 lb⋅ft).
Applications:
The first technical update resulted in an increase of 31 kW (42 bhp) and 50 N⋅m (37 lb⋅ft).
Applications:
The second technical update resulted in peak torque being produced over a 200 rpm wider band.
Applications:
Applications:
Applications:
BMW S63 engine | |
---|---|
Overview | |
Production | 2009-present |
Layout | |
Configuration | 90° V8 |
Displacement | 4.4 L (4,395 cc) |
Cylinder bore | 89 mm (3.50 in) |
Piston stroke | 88.3 mm (3.48 in) |
Valvetrain | DOHC w/ VVT |
Combustion | |
Turbocharger | Twin-turbo |
Fuel type | Petrol |
Chronology | |
Predecessor | BMW S65 |
Successor | BMW S68 (for S63B44 any Model) |
The S63 is the BMW M version of the N63, which debuted in the BMW X6 M and was used in the BMW M5 models from 2011 to 2023. The S63 uses two twin-scroll turbochargers plus a pulse tuned, cross-engine exhaust manifold [8] to keep constant exhaust pulses flowing to the turbos at every 180 degree rotation.
Applications:
Applications:
A technical update to the S63, known as the S63B44T1, debuted on the F10 M5 sedan. This version uses Valvetronic, [22] a 10:1 compression ratio (compared with 9.3:1 for the non-TU version) and 1.5 bar of boost (compared with 1.3). [23] It is the first BMW M engine to use Valvetronic. The rev limit was increased from 6800 rpm to 7200 rpm. [24]
Applications:
The S63B44T2 debuted on the 2015 X5 M and X6 M models. [25]
Applications:
The S63B44T4 debuted on the 2018 M5. [26]
Applications:
BMW P63 engine | |
---|---|
Overview | |
Production | 2018-present |
Layout | |
Configuration | 90° V8 |
Displacement | 4.0 L (3,982 cc) |
Cylinder bore | 89 mm (3.50 in) |
Piston stroke | 80 mm (3.15 in) |
Valvetrain | DOHC w/ VVT |
Combustion | |
Turbocharger | Twin-turbo |
Fuel type | Petrol |
Chronology | |
Predecessor | None |
The P63 is the BMW Motorsport version of the N63, which debuted in the BMW M8 GTE.
Alpina uses a variant of the N63 engine, which was hand-assembled at the Alpina plant in Buchloe before being transported to the BMW production line. [27]
For the 2013 model year, the Alpina engine received Valvetronic like all other N63 engines. [28]
Engine | Power | Torque | Compression ratio | Years |
---|---|---|---|---|
M1 | 373 kW (500 bhp) at 5,500 rpm | 700 N⋅m (516 lb⋅ft) at 3,000-4,750 rpm | 9.2:1 | 2009–2012 |
M1/1 | 397 kW (532 bhp) at 5,200-6,250 rpm | 730 N⋅m (538 lb⋅ft) at 2,800-5,000 rpm | 2012–2014 | |
M2, M2/1 | 10.0:1 | 2012–2015 | ||
M2/2 | 441 kW (591 bhp) at 6,000 rpm | 800 N⋅m (590 lb⋅ft) at 3,500-4,500 rpm | 2015- | |
M5 [29] (N63M30) | 447 kW (599 bhp) at 5,750-6,250 rpm | 800 N⋅m (590 lb⋅ft) at 3,000-5,000 rpm | 2016- | |
M5/1 (N63B44T3 type) [30] | 456 kW (612 bhp) at 5,500-6,500 rpm | 800 N⋅m (590 lb⋅ft) at 2,000-5,000 rpm | 10.5:1 | 2020- |
Applications:
Applications:
Applications:
Applications:
Applications:
The Alpina engine code is N63M30A.
Applications:
An evolution of this engine, with better power delivery, is of the N63B44T3 type.
Applications:
In December 2014, BMW North America released a voluntary recall ("Customer Care Package") relating to issues with timing chain stretch, fuel injectors, mass air flow sensors, crankcase vent lines, battery, engine vacuum pump, low pressure fuel sensor and revising the oil service interval. [39]
In 2019 NHTSA addressed the multitude of issues with BMW N63 engines, various class action lawsuits in tow, and never officially declared a mass recall in regard to valve seal issues inherent in the N63 line. [40]
The fourth generation of the BMW 7 Series consists of the BMW E65 and BMW E66 luxury cars. The E65/E66 was produced from 2001 to 2008 and is often collectively referred to as the E65. The E65 replaced the E38 7 Series and was produced with petrol and turbo-diesel straight-six and V8 engines, along with a petrol V12 flagship model.
The BMW N62 is a naturally aspirated V8 petrol engine which was used in BMW cars from 2001 to 2010. It also remained in small-scale production for the Morgan Aero until 2019. The N62 is the world's first engine to use a continuously variable-length intake manifold, and BMW's first V8 to feature variable valve lift.
BMW M GmbH, formerly known as BMW Motorsport GmbH, is a subsidiary of BMW AG that manufactures performance cars.
Alpina Burkard Bovensiepen GmbH & Co. KG is an automobile manufacturing company based in Buchloe, in the Ostallgäu district of Bavaria, Germany that develops and sells high-performance versions of BMW cars. Alpina works closely with BMW and their processes are integrated into BMW's production lines, and is recognized by the German Ministry of Transport as an automobile manufacturer, in contrast to other performance specialists, which are aftermarket tuners. The Alpina B7 is produced at the same assembly line in Dingolfing, Germany, as BMW's own 7 Series. The B7's twin-turbo 4.4-litre V8 is assembled by hand at Alpina's facility in Buchloe, Germany, before being shipped to BMW for installation, and the assembled vehicle is then sent back to Alpina for finishing touches.
The BMW N54 is a twin-turbocharged straight-six petrol engine that was produced from 2006 to 2016. It is BMW's first mass-produced turbocharged petrol engine and BMW's first turbocharged petrol engine since the limited-production BMW M106 was discontinued in 1986. The N54 debuted at the 2006 Geneva Motor Show and was launched in the 335i model of the E90/E91/E92/E93 3 Series range.
The fifth generation of the BMW 7 Series consists of the BMW F01 and BMW F02 full-size luxury sedans. The F01/F02 generation was produced by BMW from 2008 to 2015 and is often collectively referred to as the F01.
G-Power is a German car tuning manufacturer based in Aichach, Bavaria. Founded in 1983 by Jesna Mawela, the company specialises in tuning BMW cars and manufacturing boutique vehicles. Its supercharged 5.0L V-10 830 hp BMW M5 Hurricane RRS reached 372 km/h (231 mph)
The BMW N55 is a turbocharged straight-six petrol (gasoline) engine that began production in 2009. The N55 replaced the BMW N54 engine and was introduced in the F07 5 Series Gran Turismo.
The BMW N57 is a family of aluminium, turbocharged straight-6 common rail diesel engines. The engines utilize variable geometry turbochargers and Bosch piezo-electric injectors. The engine jointly replaced the M57 straight-6 and M67 V8 engines. In 2015 the N57 started to be replaced with the B57 engine, beginning with the G11 730d.
The sixth generation of the BMW 5 Series consists of the BMW F10, F18, BMW F11 and BMW F07 executive cars and were produced by BMW from January 2010 to 2017, with F10 being launched on 20 March 2010 to domestic market and F11 in the summer of 2010. The F07 Gran Turismo was produced from early September 2009 to 2017, being launched in the domestic German market in late October 2009.
The third generation of the BMW 6 Series consists of the BMW F12, BMW F13BMW F06 executive-sized grand tourers. The F12/F13/F06 generation was produced from 2011 to 2018 and is often collectively referred to as the F12.
The BMW B58 is a turbocharged straight-six engine, which began production in 2015. The B58 replaced the N55 and was launched in the F30 340i.
The ZF S6-53 is a 6-speed manual transmission manufactured by ZF Friedrichshafen AG. It is designed for longitudinal engine applications, and is rated to handle up to 600 newton-metres (443 lbf⋅ft) of torque.
The BMW X5 M (F85) is a mid-size luxury SUV that is based on the BMW X5 (F15) which has been built by BMW since 2014. Unlike the BMW X5 M50d the X5 M is a full BMW M series car that has the M Powered engine. In comparison, the M50d is classified as an "M Performance Car" which means it isn't a full M car unlike the BMW M3 or the BMW M5.
The Alpina B6 (F12) is the third generation of the high performance grand tourer manufactured by German automobile manufacturer Alpina. Introduced at the 2011 Tokyo Motor Show, the B6 was based on the BMW 6 Series and was available in coupé and convertible body styles, with the latter being introduced at the 2011 Frankfurt Motor Show. A third saloon bodystyle called the gran coupé was introduced in 2014. The Alpina B6 gran coupé was replaced by the Alpina B8 gran coupe (G16) in 2021.
The Alpina B7 (F01) is the fourth generation of the high-performance BMW 7 Series manufactured by Alpina from 2011 until 2015. Based on the BMW 7 Series (F01), the car was introduced to the public at the 2010 Chicago Auto Show and was available in normal and long-wheelbase versions, with xDrive or rear-wheel drive. The B7's engine was hand-built at the Alpina factory at Buchloe and then sent to the BMW factory in Dingolfing to be put into the body shell. The car was painted and initially assembled at the Dingolfing plant and was then sent back to Alpina for final assembly. It was the second Alpina B7 to be offered in North America, with 1,740 examples imported and sold in the United States.
The Alpina B7 Bi-Turbo, or Alpina B7, is the fifth generation of the high-performance full-size luxury car manufactured by German automobile manufacturer Alpina. Based on the BMW 7 Series (G12), the B7 Bi-Turbo was introduced at the 2016 Geneva Motor Show. Known as the B7 in North America, the car is the third B7 model to be imported to the United States. The Alpina B7 was discontinued in September 2022.
The Alpina B5 and D5 (F10) are a series of high performance executive cars manufactured by German automobile manufacturer Alpina from 2011 to 2016. Introduced at the 2010 Goodwood Festival of Speed, the car is the second generation of the B5 and succeeds the B5 (E60). Based on the BMW 5 Series (F10), the car was available in saloon and wagon bodystyles.
The BMW S68 is a twin-turbocharged V8 engine produced by BMW. Its first use was in the 2022 revised BMW X7 as the M60i. A few weeks after its presentation, BMW showed a study of the XM with a more powerful version of the engine. In addition, the basic version is also used in BMW 760i, BMW X5 M60i, and BMW X6 M60i.