BMW P48 Turbo | |
---|---|
Overview | |
Manufacturer | BMW Motorsport |
Production | 2019-2020 |
Layout | |
Configuration | Inline-4 cylinder |
Displacement | 2.0 litres (122 cubic inches) |
Cylinder bore | 86–90 mm (3.39–3.54 in) |
Piston stroke | Free but typically approximately between 86–90 mm (3.39–3.54 in) |
Cylinder block material | Die cast steel or aluminium alloy. Machining process from a solid is not permitted |
Cylinder head material | Die cast steel or aluminium alloy |
Valvetrain | DOHC 16-valve (four-valves per cylinder) |
Compression ratio | 15:1 |
Combustion | |
Turbocharger | Single-turbocharged by Garrett Advancing Motion with 3.5 bar (51 psi) of turbo boost pressure |
Fuel system | Bosch HDEV6 350 bar (5,076 psi) central high-pressure gasoline direct fuel injection. One direct injector per cylinder fed by an engine-driven high-pressure fuel pump |
Management | Bosch Motronic MS 7.4 |
Fuel type | Aral Ultimate 102 RON unleaded racing gasoline |
Oil system | Dry sump. Shell Helix Ultra |
Cooling system | Single mechanical water pump feeding a single-sided cooling system |
Output | |
Power output | 610 + 30 hp (455 + 22 kW) (2019) later 580 + 60 hp (433 + 45 kW) (2020-present) [1] including push-to-pass |
Torque output | Approx. 650 N⋅m (479 lb⋅ft) @ 9,000 rpm |
Dimensions | |
Length | 600 mm (23.62 in) |
Width | 697 mm (27.44 in) |
Height | 693 mm (27.28 in) |
Dry weight | 187 lb (85 kg) including turbocharger |
Chronology | |
Predecessor | BMW P66 Series (V8) |
The BMW P48 Turbo is a prototype four-stroke 2.0-litre single-turbocharged inline-4 racing engine, developed and produced by BMW Motorsport for Deutsche Tourenwagen Masters. The P48 Turbo engine is full custom-built but partially borrows the cylinder blocks from BMW B48 road car engine which had a same displacement. BMW P48 Turbo is the first-ever turbocharged DTM engine to date, replacing the aging BMW P66 Series (P66/1) V8 engine after seven-years of service and conform the "Class 1" regulations that shared with Japanese Super GT under Nippon Race Engine (NRE) formula. BMW P48 Turbo engine currently competes with engine competitors Audi RC8 2.0 TFSI and HWA AFR Turbo 2.0.
The BMW P48 Turbo engine was made a first shakedown début fitted with BMW M4 Turbo DTM car on 27 October 2018 at near BMW headquarters in Munich, Germany in the hands of Bruno Spengler. [2] The BMW P48 Turbo engine was publicly unveiled on 25 April 2019 including comparison with first BMW 2002 Turbo engine [3] and made an official race début on 3 May 2019 at Hockenheimring.
Touring car racing is a motorsport road racing competition that uses race prepared touring cars. It has both similarities to and significant differences from stock car racing, which is popular in the United States.
The Deutsche Tourenwagen Masters is a sports car racing series sanctioned by ADAC. The series is based in Germany, with rounds elsewhere in Europe. The series currently races a modified version of Group GT3 grand touring cars, replacing the silhouette later Class 1 touring cars of earlier years.
The BMW M3 is a high-performance version of the BMW 3 Series, developed by BMW's in-house motorsport division, BMW M GmbH. M3 models have been produced for every generation of 3 Series since the E30 M3 was introduced in 1986.
BMW M GmbH, formerly known as BMW Motorsport GmbH, is a subsidiary of BMW AG that manufactures performance cars.
The BMW M1 is a mid-engined sports car produced by German automotive manufacturer BMW from 1978 until 1981.
Throughout its history, BMW cars and motorcycles have been successful in a range of motorsport activities. Apart from the factory efforts, many privateer teams enter BMW road cars in touring car racing. BMW also entered cars or provided engines in Formula One, Formula Two and sportscar racing. BMW is currently active in IMSA, the Isle of Man TT, the North West 200, the Superbike World Championship and the Deutsche Tourenwagen Masters.
The BMW M4 is a version of the BMW 4 Series automobile developed by BMW's motorsport division, BMW M, that has been built since 2014. As part of the renumbering that splits the coupé and convertible variants of the 3 Series into the 4 Series, the M4 replaced those variants of the BMW M3. Upgrades over the standard BMW 4 Series include an upgraded engine, suspension, exhaust system, brakes and weight reduction measures including increased use of carbon fibre, such as on the roof of the car.
The BMW N55 is a turbocharged straight-six petrol (gasoline) engine that began production in 2009. The N55 replaced the BMW N54 engine and was introduced in the F07 5 Series Gran Turismo.
Class 1 Touring Cars refers to two generations of prototype silhouette-style touring car regulations employed by the FIA.
The sixth generation of the BMW 3 Series consists of the BMW F30, BMW F31 and BMW F34 compact executive cars. The F30/F31/F34 generation was produced from October 2011 to 2019 and is often collectively referred to as the F30.
The BMW M2 is a version of the BMW 2 Series automobile developed by BMW's motorsport division, BMW M GmbH. As the 2 Series replaced the 1 Series coupé and convertible models, the first-generation M2 was marketed as the most basic M model in the range.
The first generation of the BMW 4 Series consists of the BMW F32, BMW F33 and BMW F36 compact executive cars. The F32/F33/F36 was produced from 2014 to 2020 and is often collectively referred to as the F32.
The BMW M4 DTM is a touring car constructed by the German car manufacturer BMW for the Deutsche Tourenwagen Masters. It was developed in 2013, and partook in DTM races from 2014 to 2020. Two versions were made: a naturally-aspirated V8 car through 2018, and a turbo Class 1 version starting in 2019. The M4 DTM is based on the production model BMW M4 and replaced the BMW M3 DTM after the 2013 season.
The BMW M3 DTM is a DTM touring car constructed by the German car manufacturer BMW. It was developed in 2010 and has been raced in DTM seasons since their return to the sport after 20 years absence in 2012 until the end of 2013 season before it was succeeded by BMW M4 DTM. It was designed by BMW chief engineer Dominic Harlow. The M3 DTM was based on E92 production car.
The 2019 DTM was the thirty-third season of premier German touring car championship, first season under "Class 1" regulations era and also twentieth season under the moniker of DTM since the series' resumption in 2000. Mercedes-AMG withdrew from the championship after the 2018 season to focus on their Formula E entry. British sports car manufacturer Aston Martin replaced Mercedes-Benz, which marked the first non-German entry in 23 years when Italian car manufacturer Alfa Romeo last entered the series under the International Touring Car Series name in 1996. Defending champion Gary Paffett did not return to defend his title, as he moved to Formula E.
The Audi RS5 Turbo DTM is a Class One Touring Car constructed by the German car manufacturer Audi AG for use in the Deutsche Tourenwagen Masters. The car was an updated version of the previous Audi RS5 DTM that had a naturally aspirated engine. The Audi RS5 Turbo DTM would remain to be based on the production Audi RS5 car. The car made its DTM debut in the 2019 season under "Class 1" regulations and was used until the 2020 season. The RS5 Turbo is Audi's first-turbo powered DTM car.
The 2020 Deutsche Tourenwagen Masters was the thirty-fourth season of premier German touring car championship and also twenty-first season under the moniker of Deutsche Tourenwagen Masters since the series' resumption in 2000 as well as second and final season of "Class 1" regulations era.
The BMW P66 Series is a prototype four-stroke 4.0-litre naturally aspirated V8 racing engine, developed and produced by BMW Motorsport in partnership with AC Schnitzer for Deutsche Tourenwagen Masters. BMW P66 Series was unveiled on 18 July 2011 alongside BMW M3 DTM (E92) machine at BMW Welt in Munich, Germany. The BMW P66 Series engine lifespan was only lasted seven years and later permanently retired in 2019 and later restored in 2022 in order to supply engines for BMW M Hybrid V8 LMDh machine.
The 2021 Deutsche Tourenwagen Masters was the thirty-fifth season of the premier German motor racing championship and also the twenty-second season under the moniker of Deutsche Tourenwagen Masters since the series' resumption in 2000.
The 2022 Deutsche Tourenwagen Masters was the thirty-sixth season of the premier German motor racing championship and also the twenty-third season under the moniker of Deutsche Tourenwagen Masters since the series' resumption in 2000. It was the second season of the DTM to be run under Group GT3 regulations.