British Rail Class 129

Last updated

British Rail Class 129
In service1958–1973
Manufacturer Cravens
Order no.30418 [1]
Family name First generation
ReplacedSteam locomotives and carriages
Constructed1955
Entered service1958 [2]
Scrapped1975
1986
Number built3
Number scrappedAll
FormationSingle car:
DMLV [2]
DiagramBR531 [1]
Fleet numbers55997-55999 [3]
CapacityLuggage space only [2]
Operator(s) British Railways
Depot(s)
Line(s) served London Midland Region
Specifications
Car body construction Steel
Car length57 ft 6 in (17.53 m) (over body ends) [1]
Width9 ft 3 in (2.82 m) (overall) [1]
Height12 ft 4+12 in (3.772 m) (over roof) [1]
DoorsSlam [2]
Wheelbase
  • 40 ft 0 in (12.19 m) (bogie centres)
  • 8 ft 6 in (2.59 m) (bogies) [1]
Maximum speed70 mph (113 km/h) [2]
Weight30 long tons (30 t; 34 short tons) [1]
Prime mover(s) 2 × BUT (AEC) 150 hp (110 kW) [2] [1]
Power output300 hp (220 kW) [2]
Braking system(s) Vacuum [2]
Coupling system Screw [2]
Multiple working Yellow Diamond
Track gauge 1,435 mm (4 ft 8+12 in) standard gauge

The British Rail Class 129 was a class of single car diesel multiple units (DMU) built in 1955 for British Rail. Only three were built by Cravens and were introduced in 1958. The class was built for parcels traffic like the Class 128. One unit (55997) survived into departmental service being named 'Hydra'. The driving ends of a Class 129 car bore a visible similarity to that of the Class 105, also built by Cravens.

Contents

Fleet list

Table of orders and numbers
Lot No.TypeDiagramQtyFleet numbersNotes
30418Non-ganwayed Motor Parcel Van5313M55997–55999

Departmental Usage

One unit, M55997, was converted as a test bed for hydrostatic drive in 1980, was renumbered RDB 975385, and named Laboratory 9 ‘Hydra’. [5]

It was fitted hydrostatic transmission having the normal Leyland Motors 680 six-cylinder engine driving two Bosch Rexroth Hydramatic axial piston pumps. Each pump supplied fluid to a Volvo fixed displacement compact axle-end motor which drove the axle directly. The maximum system pressure was in the order of 400 bar (40 MPa; 5,800 psi).

This arrangement was only fitted to one bogie, the other one retaining its normal drive but with the cardan shaft disconnected.

The unit was finally withdrawn in January 1986 and scrapped in August that year by Vic Berry at Leicester.

Related Research Articles

<span class="mw-page-title-main">Diesel multiple unit</span> Diesel-powered railcar designed to be used in formations of 2 or more cars

A diesel multiple unit or DMU is a multiple-unit train powered by on-board diesel engines. A DMU requires no separate locomotive, as the engines are incorporated into one or more of the carriages. Diesel-powered single-unit railcars are also generally classed as DMUs. Diesel-powered units may be further classified by their transmission type: diesel–mechanical DMMU, diesel–hydraulic DHMU, or diesel–electric DEMU.

<span class="mw-page-title-main">Railcar</span> Self-propelled railway vehicle designed to transport passengers

A railcar is a self-propelled railway vehicle designed to transport passengers. The term "railcar" is usually used in reference to a train consisting of a single coach, with a driver's cab at one or both ends. Some railway companies, such as the Great Western, termed such vehicles "railmotors".

<span class="mw-page-title-main">Diesel locomotive</span> Locomotive powered by a diesel engine

A diesel locomotive is a type of railway locomotive in which the power source is a diesel engine. Several types of diesel locomotives have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels. The most common are diesel-electric locomotives and diesel-hydraulic.

<span class="mw-page-title-main">Railbus</span> Lightweight passenger rail vehicle that shares many aspects of its construction with a bus

A railbus is a lightweight passenger railcar that shares many aspects of its construction with a bus, typically having a bus body and four wheels on a fixed base, instead of on bogies. Originally designed and developed during the 1930s, railbuses have evolved into larger dimensions, with characteristics similar in appearance to a light railcar, with the terms railcar and railbus often used interchangeably. Railbuses designed for use specifically on little-used railway lines were commonly employed in countries such as Germany, Italy, France, the United Kingdom and Sweden.

<span class="mw-page-title-main">British Rail Class 121</span>

The British Rail Class 121 is a single-car double-ended diesel multiple unit. 16 driving motor vehicles were built from 1960, numbered 55020–55035. These were supplemented by ten single-ended trailer vehicles, numbered 56280–56289. They have a top speed of 70 mph, with slam-doors, and vacuum brakes. The driving motor vehicles were nicknamed "Bubble Cars" by some enthusiasts.

<span class="mw-page-title-main">British Rail Class 116</span>

The British Rail Class 116 diesel multiple units were built by BR Derby from 1957 to 1961. Introduced as part of the British Railways Modernisation Plan in the mid 1950s, as with other first generation DMUs the 116 was intended to replace steam trains and reduce costs across the rail network. Alongside Metro-Cammell, BR Derby had prior experience with DMUs, having developed a Lightweight Unit, and so was awarded a contract for a new design.

<span class="mw-page-title-main">British Rail Class 114</span> Class of 49 two-car diesel multiple units built by Derby C&W Works

The British Rail Class 114 diesel multiple units were built by BR Derby from September 1956 to July 1957. Forty-nine 2-car units were built, numbered E50001-49 for driving motors and E56001-49 for driving trailers. The units were used in the early days out of 40A Lincoln TMD (LN) on services all over the county, although a small number were transferred to 41A Sheffield (Darnall) during 1959/60.

<span class="mw-page-title-main">British Rail Classes 101 and 102</span> British diesel multiple unit train

The British Rail Classes 101 and 102 diesel-mechanical multiple units were built by Metro-Cammell at Washwood Heath in Birmingham, England from 1956 to 1959, following construction of a series of prototype units. These classes proved to be some of the most successful and longest-lived of BR's First Generation DMUs, second in longevity only to the Class 121, with the final five units being withdrawn on 24 December 2003. The oldest set was, by then, just over 47 years old.

<span class="mw-page-title-main">British Rail Class 127</span>

The British Rail Class 127 diesel multiple units were built by BR Derby in 1959. Thirty 4-car units were built, formed of two outer driving motor vehicles, sandwiching two intermediate trailers which were classified class 186. The technical description of such as 4-car unit was DMBS + TSL + TS + DMBS.

<span class="mw-page-title-main">GWR railcars</span> Railcars used on the Great Western Railway

In 1933, the Great Western Railway introduced the first of what was to become a very successful series of diesel railcars, which survived in regular use into the 1960s, when they were replaced with the new British Rail "first generation" type diesel multiple units.

<span class="mw-page-title-main">British Rail Class 118</span>

The British Rail Class 118 diesel multiple units were built by the Birmingham Railway Carriage and Wagon Company (BRCW) and introduced from 1960. It was a licence-built version of the British Rail Class 116.

Push–pull is a configuration for locomotive-hauled trains, allowing them to be driven from either end of the train, whether having a locomotive at each end or not.

<span class="mw-page-title-main">Electric multiple unit</span> Electric train with no locomotive

An electric multiple unit or EMU is a multiple-unit train consisting of self-propelled carriages using electricity as the motive power. An EMU requires no separate locomotive, as electric traction motors are incorporated within one or a number of the carriages. An EMU is usually formed of two or more semi-permanently coupled carriages, but electrically powered single-unit railcars are also generally classed as EMUs. The great majority of EMUs are passenger trains, but versions also exist for carrying mail.

<span class="mw-page-title-main">Parry People Movers</span> Very light rail manufacturer

Parry People Movers Ltd. (PPM) is a British company manufacturing lightweight trams and railcars that use flywheel energy storage (FES) to store energy for traction, allowing electric systems to operate without overhead wires or third rails, and railcars fuelled by small gas, diesel or hydrogen engines.

<span class="mw-page-title-main">Stadler GTW</span> Articulated multiple unit

The Stadler GTW is an articulated railcar for local transport made by Stadler Rail of Switzerland. GTW stands for Gelenktriebwagen.

<span class="mw-page-title-main">British Rail Class 120</span>

The British Rail Class 120 was a cross-country DMU in three-car formation, built at the British Rail Swindon Works.

<span class="mw-page-title-main">British Rail Class 124</span> Class of 8 six-car diesel multiple units built by Swindon Works

The British Rail Class 124 diesel multiple units were built by BR Swindon Works in 1960.

<span class="mw-page-title-main">British Rail Class 128</span>

The British Rail Class 128 was a class of diesel multiple unit, built for British Rail. Introduced in 1959, ten of the class were built by Gloucester Railway Carriage and Wagon Company, each with two 230 hp British United Traction - Albion engines. The class was built specifically for parcels, fitted out with parcel racks and bike storage at each end, and did not feature any passenger accommodation. The last members of the class were withdrawn in 1990 and broken up the following year, and none were preserved.

<span class="mw-page-title-main">New South Wales 900/800 class railcar</span>

The 900/800 class railcars were diesel multiple units built by the New South Wales Government Railways between November 1951 and November 1960.

<span class="mw-page-title-main">British railcars and diesel multiple units</span> Network_Rail

Diesel multiple units and railcars are trains, usually with passenger accommodation, that do not require a locomotive. Railcars can be single cars, while in multiple units cars are marshalled together with a driving position either end. As of December 2010, 23 percent of the rail passenger cars used on Network Rail are part of a diesel multiple unit.

References

  1. 1 2 3 4 5 6 7 8 Diesel Multiple Unit Trains (Railcars) Diagram Book (PDF). BRB Residuary Ltd. BR531. Retrieved 24 February 2016.
  2. 1 2 3 4 5 6 7 8 9 "Class 129". The Railway Centre. Archived from the original on 9 March 2005. Retrieved 24 February 2016.{{cite web}}: CS1 maint: unfit URL (link)
  3. "Class 129 Cravens Parcel DMU Cars: Numbering". Railcar.co.uk. Retrieved 24 February 2016.
  4. "Class 129 Cravens Parcel DMU Cars: Summary". Railcar.co.uk. Retrieved 24 February 2016.
  5. "975385". Railcar.co.uk. Retrieved 24 February 2016.